Synthesis of well‐defined star‐shaped poly(ε‐caprolactone)/poly(ethylbene glycol) amphiphilic conetworks by combination of ring opening polymerization and “click” chemistry

Well‐defined star‐shaped hydrophobic poly(ε‐caprolactone) (PCL) and hydrophilic poly(ethylene glycol) (PEG) amphiphilic conetworks (APCNs) have been synthesized via the combination of ring opening polymerization (ROP) and click chemistry. Alkyne‐terminated six arm star‐shaped PCL (6‐s‐PCLx‐C?CH) and azido‐terminated PEG (N₃‐PEG‐N₃) are characterized by ¹H NMR and FT‐IR. The swelling degree of the APCNs is determined both in water and organic solvent. This unique property of the conetworks is dependent on the nanophase separation of hydrophilic and hydrophobic phases. The morphology and thermal behaviors of the APCNs are investigated by SEM and DSC respectively. The biocompatibility is determined by water soluble tetrazolium salt reagents (WST‐1) assay, which shows the new polymer networks had good biocompatibility. Through in vitro release of paclitaxel (PTX) and doxorubicin (DOX), the APCNs is confirmed to be promising drug depot materials for sustained hydrophobic and hydrophilic drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 407–417     

Amphiphilic conetworks. IV. Poly(methacrylic acid)‐l‐polyisobutylene and poly(acrylic acid)‐l‐polyisobutylene based hydrogels prepared by two‐step polymer procedure. New pH responsive conetworks

This article describes the synthesis and characterization of new amphiphilic polymer conetworks containing hydrophilic poly(methacrylic acid) (PMAA) or poly(acrylic acid) (PAA) and hydrophobic polyisobutylene (PIB) chains. These conetworks were prepared by a two‐step polymer synthesis. In the first step, a cationic copolymer of isobutylene (IB) and 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate (IDI) was prepared. The isocyanate groups of the IB–IDI random copolymer were subsequently transformed in situ to methacrylate (MA) groups in reaction with 2‐hydroxyethyl methacrylate (HEMA). In the second step, the resulting MA‐multifunctional PIB‐based crosslinker, PIB(MA)_n, with an average functionality of approximately four methacrylic groups per chain, was copolymerized with methacrylic acid (MAA) or acrylic acid (AA) by radical mechanism in tetrahydrofuran giving rise to amphiphilic conetworks containing 31–79 mol % of MAA or 26–36 mol % of AA. The synthesized conetworks were characterized with solid‐state ¹³C‐NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proven by swelling in both aqueous media with low and high pH and n‐heptane. The effect of varying pH on the swelling behavior of the synthesized conetworks is presented. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1284–1291, 2009     

Biocompatible amphiphilic conetwork based on crosslinked star copolymers: A potential drug carrier

A series of amphiphilic conetworks (APCNs) is synthesized through crosslinking of well‐defined tri‐arm star diblock copolymers via atom transfer radical polymerization. A new three‐arm initiator is synthesized to initiate the polymerization of 2‐hydroxyethyl methacrylate (HEMA) via “core‐first” method. The resulting star HEMA homopolymers with well‐defined molecular weight and narrow polydispersity are used as macroinitiator to incorporate allyl methacrylate to get the star diblock copolymers. Then, the precursors with allyl pendant groups are fully crosslinked with polyhydrosiloxanes through hydrosilylation. The so‐prepared APCNs exhibit unique properties of microphase separation of hydrophilic (HI) and hydrophobic (HO) phases with small channel size, a variable swelling capacity, excellent biocompatibility, and outstanding mechanical strength (2 ± 0.5 MPa). The properties of APCNs depend on the ratio of HI to HO, which can be regulated via precise synthesis of the star diblock copolymers. The APCNs show well‐controlled drug release to choline theophyllinate, suggesting a promising intelligent drug carrier for controlled release. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2537–2545     

Formation of CdS nanoclusters in phase‐separated poly(2‐hydroxyethyl methacrylate)‐l‐polyisobutylene amphiphilic conetworks

Nanophase‐separated poly(2‐hydroxyethyl methacrylate)‐l‐polyisobutylene (PHEMA‐l‐PIB) amphiphilic conetworks were obtained by crosslinking α,ω‐bismethacrylate‐terminated polyisobutylene (PIB) via copolymerization with silylated 2‐hydroxyethyl methacylate, followed by the hydrolysis of the silylether groups. Morphology development of a sample containing 64% PIB was monitored by means of transmission electron microscopy (TEM), atomic force microscopy (AFM), and small‐angle X‐ray scattering. For comparison, the morphology of a sample containing 53% PIB was investigated by AFM. The dry conetworks exhibited hydrophilic and hydrophobic phases with average 8–10‐nm domain sizes and were swellable in water as well as in heptane. Swelling amphiphilic conetworks with aqueous cadmium–chloride solution followed by exposure to H₂S resulted in nanosized CdS clusters located in the amphiphilic conetworks, that is, for the first time, new inorganic–organic hybrid materials composed of CdS semiconducting nanocrystals and PHEMA‐l‐PIB amphiphilic conetworks were prepared. © 2001 John Wiley & Sons, Inc. J Polym Sci B Part B: Polym Phys 39: 1429–1436, 2001     

Amphiphilic conetworks. III. Poly(2,3‐dihydroxypropyl methacrylate)–polyisobutylene and poly(ethylene glycol) methacrylate–polyisobutylene based hydrogels prepared by two‐step polymer procedure

This article describes the synthesis and characterization of new amphiphilic polymer conetworks containing hydrophilic poly(2,3‐dihydroxypropyl methacrylate) or poly(ethylene glycol) methacrylate (PEGMA) and hydrophobic polyisobutylene chains. This conetworks were prepared by a two‐step polymer synthesis. In the first step, a cationic copolymer of isobutylene and 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate (IDI) was prepared. The isocyanate groups of the IB‐IDI random copolymer were subsequently transformed in situ to methacrylate (MA) groups in reaction with 2‐hydroxyethyl methacrylate (HEMA). In the second step, the resulting MA‐multifunctional PIB‐based crosslinker, PIB(MA)_n, with an average functionality of approximately four per chain, was copolymerized with 2,3‐dihydroxypropyl methacrylate or poly(ethylene glycol) methacrylate by radical mechanism in tetrahydrofuran giving rise to amphiphilic conetworks containing 11–60 mol % of DHPMA or 10–12 mol % of PEGMA. The synthesized conetworks were characterized with solid‐state ¹³C‐NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proved by swelling in both water and n‐heptane. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4074–4081, 2007     

Timolol maleate release from pH-sensible poly(2-hydroxyethyl methacrylate-co-methacrylic acid) hydrogels

Multifunctional polymeric materials were obtained from poly(methacrylic acid-co-2-hydroxyethyl methacrylate), to be used as a raw material in the manufacture of contact lens and as drug delivery systems. Poly(methacrylic acid-co-2-hydroxyethyl methacrylate) was prepared by free-radical polymerization in aqueous solution at 60 °C using potassium persulfate (KPS) as initiator and N,N^′-methylenebisacrylamide (BIS) as cross-linker agent. The dynamic and equilibrium swelling properties of dry glassy poly(methacrylic acid-co-2-hydroxyethyl methacrylate) polymeric networks were studied as a function of pH and methacrylic acid (MAA) content. The water content increase as MAA content and pH increase. Timolol maleate delivery from poly(MAA) and poly(2-hydroxyethyl methacrylate) (HEMA) homopolymers was studied and the results show a Fickian diffusion behavior.     

Anionic amphiphilic end‐linked conetworks by the combination of quasiliving carbocationic and group transfer polymerizations

A series of amphiphilic end‐linked conetworks was synthesized by the combination of two “quasiliving” polymerization techniques, quasiliving carbocationic (QLCCP) and group transfer polymerizations (GTP). The hydrophobic monomer was polyisobutylene methacrylate synthesized by the QLCCP of isobutylene and subsequent terminal modification reactions. The hydrophilic monomer was methacrylic acid (MAA) introduced via the polymerization of 2‐tetrahydropyranyl methacrylate followed by acid hydrolysis after (co)network formation. The conetwork syntheses were performed by sequential monomer/crosslinker additions under GTP conditions. All the precursors and the extractables from the conetworks were characterized by gel permeation chromatography and ¹H NMR. The resulting polymer conetworks were investigated in terms of their degree of swelling (DS) in aqueous media and in tetrahydrofuran (THF) over the whole range of ionization of the MAA units and in n‐hexane for uncharged conetworks. The DSs in water increased with the degree of ionization (DI) of the MAA units and the hydrophilic content in the conetwork, whereas the DSs in THF increased with the reduction of the DI of the MAA units. The effective pK of the MAA units in the conetworks increased from 8.4 to 10.5 with decreasing MAA content. These findings can facilitate the design of similar unique conetworks with adjustable swelling behavior and composition‐dependent pK values. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4289–4301, 2009     

Amphiphilic conetworks. II. Novel two‐step synthesis of poly[2‐(dimethylamino)ethyl methacrylate]–polyisobutylene,poly(N‐isopropylacrylamide)–polyisobutylene,and poly(N,N‐dimethylacrylamide)–polyisobutylene hydrogels

Amphiphilic polymer conetworks consisting of hydrophilic poly[2‐(dimethylamino)ethyl methacrylate], poly(N‐isopropylacrylamide), or poly(N,N‐dimethylacrylamide) and hydrophobic polyisobutylene chains were synthesized with a novel two‐step procedure. In the first step, a methacrylate‐multifunctional polyisobutylene crosslinker was prepared by the cationic copolymerization of isobutylene with 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate. In the second step, the methacrylate‐multifunctional polyisobutylene crosslinker, with a number‐average molecular weight of 8200 and an average functionality of approximately 4 per chain, was copolymerized radically with 2‐(dimethylamino)ethyl methacrylate, N‐isopropylacrylamide, or N,N‐dimethylacrylamide into transparent amphiphilic conetworks containing 42–47 mol % hydrophilic monomer. The synthesized conetworks were characterized with solid‐state ¹³C NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proved by swelling in both water and n‐heptane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6378–6384, 2006     

Thermoplastic amphiphilic conetworks

Our main objective was the design, synthesis, characterization, and testing of a novel class of materials, thermoplastic amphiphilic conetworks (TP‐APCNs). A further objective was the evaluation of TP‐APCNs as biomaterials, for example, as immunoisolatory membranes in a bioartificial pancreas, or as extended‐wear soft contact lenses. The synthesis of the first TP‐APCNs was accomplished by blending an amphiphilic graft polymer, poly(dimethyl acryl amide)‐g‐polydimethylsiloxane (PDMAAm‐g‐PDMS), with a commercial PDMS‐containing polyurethane (PU). The common PDMS segments coalesce and form a single phase, whereas the hard/crystalline segments of the PU physically crosslink the blend. The properties of TP‐APCNs can be controlled by the graft/PU ratio and segment molecular weights. TP‐APCNs with cocontinuous hydrophilic and hydrophobic phases were prepared as demonstrated by swelling in water and n‐heptane. Depending on the blend ratio and molecular weights, optically clear water‐swollen TP‐APCNs with 0.5–4 MPa tensile strength, 70–280% elongation, together with 2–11 × 10^?7 cm²/s glucose permeability, and 1.2–8 × 10^?8 cm²/s insulin permeability were prepared. TP‐APCNs are processible by casting and molding. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 682–691, 2009     

Optical biochemical sensor for determining hydroperoxides in nonpolar organic liquids as archetype for sensors consisting of amphiphilic conetworks as immobilisation matrices

This paper reports the successful design of a prototype of an optical biochemical sensor for the determination of hydroperoxides in nonpolar organic liquids. The sensor consists of a matrix of an amphiphilic polymer conetwork (APCN), a novel class of very promising polymeric materials for easy preparation of biochemical sensor matrices. APCNs are characterised by nanoscopic phase separation between the hydrophilic and the hydrophobic phases. For medium ratios of conetwork composition, the domains of both phases are interconnected both on the surface of the conetworks and throughout the bulk. The APCNs have peculiar swelling properties—the hydrophilic phase swells in hydrophilic media and the hydrophobic phase swells in hydrophobic media. In both types of media dissolved reagents can diffuse from the solution into the swollen phase of the polymeric conetwork. This enables loading of the hydrophilic phase of the APCNs with enzymes and indicator reagents by simple impregnation. Hydrophobic analytes can diffuse into the polymeric conetwork via its hydrophobic phase and react with indicator reagents immobilised in the hydrophilic phase at the huge internal interface between the two opposite phases. To prepare the described hydroperoxide-sensitive biosensors, we used APCN films consisting of 58% (w/w) poly(2-hydroxyethyl acrylate) (PHEA) as hydrophilic chains and 42% (w/w) polydimethylsiloxane (PDMS) as hydrophobic linkers. Horseradish peroxidase (HRP) and diammonium 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) as indicator reagent were co-immobilised in this optically clear and transparent matrix. In this feasibility study the conditions investigated were principally those relevant to characterisation of the innovative matrix material and the disposable biosensor produced from it; the biosensor was not optimised. Sensitivity toward tert-butylhydroperoxide (tBuOOH) dissolved in n-heptane was acceptable, between approximately 1 and at least 50 mmol L⁻¹, even in the dry state. The response time was 1.7 to 5.0 min. No leaching of immobilised reagents was observed during a period of at least one hour. Pre-swelling the sensors with water increased the reaction rate and the total turnover number of the enzyme. In a dry atmosphere at 4 °C the sensors were found to be stable for at least two weeks.     

Giant vesicles prepared by nitroxide-mediated photo-controlled/living radical polymerization-induced self-assembly

Giant vesicles with several-micrometer diameters were prepared by self-assembly induced by the nitroxide-mediated photo-controlled/living radical polymerization. The random block copolymerization of methyl methacrylate (MMA) and methacrylic acid (MAA) were performed using poly(methacrylic acid) (PMAA) as the prepolymer in an aqueous methanol solution to produce a PMAA-block-poly(MMA-random-MAA) random block copolymer (PMAA-b-P(MMA-r-MAA)). PMAA₁₉₅-b-P(MMA_0.817-r-MAA_0.183)₂₂₄ formed spherical vesicles with a 4.74 μm diameter and 0.108 μm wall thickness. A differential scanning calorimetry analysis demonstrated that the vesicles had a bilayer structure consisting of a hydrophilic PMAA surface and hydrophobic P(MMA-r-MAA) interface. The wet vesicles before air-drying were flexible and easily transformed by stress, whereas the dry vesicles were fragile and cracked. The vesicles in the solution were dissociated into much smaller vesicles by increasing the temperature. They were also transformed by a further temperature increase into hollow fibers and finally into membranes retaining the bilayer structure.     

Novel amphiphilic triblocks fitted with photocrosslinkable termini,and their photocrosslinking to conetworks

Two new telechelic amphiphilic triblock copolymers, HE₃‐PEG‐b‐PDMS‐b‐PEG‐HE₃ and HE₃‐PEG‐b‐PDMS‐b‐PEG‐HE₃, i.e., sequence‐reversed triblocks of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic polydimethylsiloxane (PDMS) segments fitted with photocrosslinkable tri[2‐(3,4‐cyclohexane oxide)ethyl‐dimethylsiloxy]silane (HE₃) termini, were synthesized, characterized, photocrosslinked to amphiphilic conetworks (APCNs), and the properties of the APCNs were analyzed. APCNs in which the crosslinking sites are located in the hydrophobic domains exhibited significantly better mechanical properties than those in which the crosslinks were in the hydrophilic domains. The stiff domains formed of the UV‐crosslinkable HE₃ chain‐end substituents provide not only crosslinking but reinforcement as well. The crosslinking/reinforcement efficiency was greatly enhanced by the addition of excess HE₃. Water‐swollen APCNs were optically clear and exhibited mechanical properties appropriate for biomedical application. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 174–185, 2008     

Poly(ethylene glycol)‐based amphiphilic model conetworks: Synthesis by RAFT polymerization and characterization

Poly(ethylene glycol) (PEG)‐containing quasi‐model amphiphilic polymer conetworks (APCNs) were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization using α,ω‐bis(2‐cyanoprop‐2‐yl dithiobenzoate)‐PEG as a bifunctional RAFT macrochain transfer agent (macro‐CTA) and stepwise additions of a hydrophobic monomer and a crosslinker (crosslinker: macro‐CTA = 10:1, reaction time 24 h). Three different types of monomers, methyl methacrylate (MMA), n‐butyl acrylate and styrene, were employed as the hydrophobic monomers, whereas ethylene glycol dimethacrylate, ethylene glycol diacrylate and 1,4‐divinylbenzene served as the respective crosslinkers. PEG homopolymer hydrophilic quasi‐model networks were also prepared by RAFT‐polymerizing the three crosslinkers directly onto the two active ends of the PEG‐based macro‐CTA. From the three ABA triblock copolymers prepared, the MMA‐containing one was obtained at the highest polymerization yields. The crosslinking yields of the three ABA triblock copolymers with the corresponding crosslinkers were higher than those of the PEG‐based macro‐CTA with the same crosslinkers. The degrees of swelling (DSs) of all conetworks were measured in water and in tetrahydrofuran (THF). The DSs of the APCNs in THF were higher than those in water, whereas the reverse was true for the DSs of the hydrophilic homopolymer networks. Finally, the aqueous DSs of the APCNs were lower than those of the corresponding hydrophilic homopolymer networks. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7556–7565, 2008     

Synthesis and characterization of biodegradable multicomponent amphiphilic conetworks with tunable swelling through combination of ring‐opening polymerization and “click” chemistry method as a controlled release formulation for 2,4‐dichlorophenoxyacetic acid herbicide

Multicomponent (two, three, and four component) amphiphilic conetworks (APCNs) with tunable swelling behaviors were fabricated through the ring opening polymerization and click chemistry utilizing various combinations of azide and alkyne functionalized poly (ethylene glycol) (PEG) and poly (caprolactone) (PCL) precursors. Prepare azido‐terminated star‐shaped PCL, azido‐terminated PEG, alkyne‐terminated PEG, and propargylated pentaerythritol were characterized by hydrogen‐1 proton nuclear magnetic resonance (¹H NMR) and Fourier‐transform infrared (FT‐IR) spectroscopy. The morphology and thermal behavior of the APCNs were studied by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The swelling behavior of APCNs could be manipulated through an establishment of a balance between hydrophilic segments, hydrophobic segments, and cross‐linking density. The 2,4‐dichlorophenoxyacetic acid (2,4‐D) herbicide was entrapped in APCNs as a model agrochemical to study the release profile from APCNs. The obtained results showed that the release of 2,4‐D could be controlled by the swelling degree of APCNs. Finally, the biodegradability rates of APCNs were investigated in agricultural soil. The results exhibited that the decrease in the swelling degree led to decreased degradation rate of APCNs. According to obtained results, these APCNs could be used as biomaterials for the controlled release of agrochemicals.     

Poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) networks with tailored water sorption

A poly(l-lactide) diol was obtained through ring opening polymerization of l-lactide, using 1,6 hexanediol and tin(II) 2 ethylhexanoate as a catalyst. In the second step, the poly(l-lactide) macromer (mLA) was obtained by the reaction of poly(l-lactide) diol with methacrylic anhydride. The effective incorporation of the polymerizable end groups was assessed by Fourier transform infrared spectroscopy and nuclear magnetic resonance (¹H NMR). Besides, poly(l-lactide) networks (pmLA) were prepared by photopolymerization of mLA. Further, the macromer was copolymerized with 2-hydroxyethyl acrylate seeking to tailor the hydrophilicity of the system. A set of hydrophilic copolymer networks were obtained. The phase microstructure of the new system and the network architecture was investigated by differential scanning calorimetry, infrared spectroscopy, dynamic mechanical spectroscopy, thermogravimetry, and water sorption studies.     

Preparation and Application of Double Hydrophilic Block Copolymer Particles

The preparation of some unique block copolymers and block copolymer particles via radical heterophase polymerization is described. Special emphasis is placed on double hydrophilic block copolymers such as poly(styrene sulfonic acid)-b-poly(methacrylic acid) diblock copolymer and double hydrophilic block copolymer particles consisting of both hydrophilic shells and cross-linked hydrophilic cores. Examples are given for the application of such particles as adsorbents, nano-reactors for chemical synthesis, and as colloidal stabilizers in both heterophase polymerization and biomineralization reactions.     

Silicon-mediated synthesis of new amphiphilic oligomers

A series of amphiphilic oligomers have been synthesized in which the hydrophobic component was polyisobutylene, polystyrene, poly(methyl methacrylate) or dodecane, and the hydrophilic component was poly(vinyl alcohol) or poly(methacrylic acid). These syntheses exploited the chain extension chemistry of aldehyde-functionalized materials using silyl aldol polymerization or the group transfer polymerization of methacrylates. The interfacial character of these new amphiphilic oligomers was examined using water/toluene emulsification tests. © 1997 John Wiley & Sons, Inc.     

Novel Anti‐Biofouling Soft Contact Lens: l‐Cysteine Conjugated Amphiphilic Conetworks via RAFT and Thiol–Ene Click Chemistry

A unique l ‐cysteine conjugated antifouling amphiphilic conetwork (APCN) is synthesized through end‐crosslinking of well‐defined triblock copolymers poly(allyl methacrylate)‐b‐poly(ethylene glycol)‐b‐poly(allyl methacrylate) via a combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and thiol–ene “click” chemistry. The synthesized poly(ethylene glycol) macro‐RAFT agent initiates the polymerization of allyl methacrylate in a controlled manner. The vinyl pendant groups of the precursor partially conjugate with l ‐cysteine and the rest fully crosslink with mercaptopropyl‐containing siloxane via thiol–ene click chemistry under UV irradiation into APCNs, which show distinguished properties, that is, excellent biocompatibility, more than 39.6% water content, 101 barrers oxygen permeability, optimized mechanical properties, and more than 93% visible light transmittance. What's more, the resultant APCNs exhibit eminent resistance to protein adsorption, where the bovine serum albumin and lysozyme adsorption are decreased to 12 and 21 µg cm⁻², respectively. The outstanding properties of APCNs depend on the RAFT controlled method, which precisely designs the hydrophilic/hydrophobic segments and eventually greatly improves the crosslinking efficiency and homogeneity. Meantime, the l ‐cysteine monolayer can effectively reduce the surface hydrophobicity and prevent protein adsorption, which exhibits the viability for antifouling surface over and under ophthalmic devices, suggesting a promising soft contact lens.

     

Polytetrahydrofuran amphiphilic networks. IV. Swelling behavior of poly(acrylic acid)‐l‐polytetrahydrofuran and poly(methacrylic acid)‐l‐polytetrahydrofuran networks

Poly(acrylic acid)‐l‐polytetrahydrofuran (PAA‐l‐PTHF) and poly(methacrylic acid)‐l‐polytetrahydrofuran (PMAA‐l‐PTHF) networks were synthesized by the free‐radical copolymerization of hydrophobic polytetrahydrofuran diacrylates with hydrophilic acrylic acid and methacrylic acid. Their swelling behavior was studied. Both PAA‐l‐PTHF and PMAA‐l‐PTHF networks had four solubility parameters, which indicated that they exhibited not only the properties of both hydrophobic and hydrophilic segments but also the combined properties of these two segments. The swell of these two series of networks was composition‐dependent in organic solvents and water. The relationship between the equilibrium swelling ratio (SR_e) in nonpolar solvents and the composition of the networks [the weight fraction of the PTHF segment (PTHF%)] may be expressed with a linear equation: SR_e = A × PTHF% + B. A and B are parameters that relate to the interaction of hydrophilic and hydrophobic segments with nonpolar solvents and to the properties of the networks, respectively. Because of the presence of a ? COOH group, these two network series were pH‐sensitive when the content of hydrophilic segments was higher. The pH sensitivity of networks could be controlled not only by the composition of the networks but also by the hydrophobic degree of the hydrophilic segments. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1784–1790, 2001     

Polymer Nano- and Microparticle Based Systems for Medical Diagnostics

Summary: Synthesis, properties and medical diagnostic applications of hydrophilic nano- and microspheres with carboxyl, aldehyde and hydroxyl groups on their surface are described. The particles were obtained by emulsion copolymerization of styrene, acrolein, methyl methacrylate, methacrylic acid, and 2-hydroxyethyl methacrylate carried on in water media and initiated with potassium persulfate. Stabilization of particles' suspensions was provided by addition of sodium dodecyl sulfate to polymerizing mixture or by formation of surfactants in situ in copolymerization involving acrolein or α-tert-butoxy-ω-vinylbenzyl-polyglycidol macromonomer (PGL). Relations between interfacial properties of these particles and their ability for covalent immobilization of proteins, with eliminated or at least reduced nonspecific adsorption of these species were investigated. The particles with covalently attached proteins (antigens or antibodies) were used for preparation of diagnostic tests based on visual or turbidimetric observation of particles' aggregation or by monitoring changes in their electrophoretic mobility accompanying specific antigen (or antibody) binding. The later test was directed toward determination of antibodies against Helicobacter pylori. Principle of a new type of diagnostic test based on photonic crystals of microspheres are described.