具有非轴对称几何缺陷的双曲旋转壳应力分析

本文探讨了分析具有非轴对称几何缺陷的双曲旋转壳的一种近似方法,在这种方法中,缺陷的影响是由虚构的载荷模拟的.并提出了在非轴对称载荷作用下,使用该方法分析具有鼓包形缺陷壳体时的一种有效的算法.这种方法既分开了各种曲率误差对于内力和力矩的影响,又体现了它们之间的相互作用,避免了在非轴对称载荷下所需的重复运算,并能在一个仅有轴对称分析能力的程序上实现.本文用该方法分析了受自重载荷和风载荷作用的,具有鼓包形缺陷的双曲冷却塔,并同时用一个特殊的有限元程序直分析了缺陷塔.通过数字结果的比较,检查了等效载荷法的精度及适用性.     

Design of anisotropic structures: Calculation,optimization, and tests

Conclusions A computational procedure based on a limiting state has been worked out which proposes the performance of tests of samples, small-scale models, and full-scale structures and a statistical analysis of the experimental data. Advantages of the method are shown in comparison with the computational method based on fracturing loads which pertain to estimating the accuracy of the computational scheme of structures and determining their safety coefficients. An optimality criterion is formulated within the framework of the method which is related to ensuring a maximum of the limiting (fracturing or critical) load with a constant mass of the structure.Applications of the method are given to estimation of the strength and stability of structures made out of polymeric and metal CM with the use of the Gol'denblat-Kopnov criterion and solutions based on linear shell theory. The conditions for realization of the optimality criterion of structures are determined. Recommendations are made for the rational reinforcement of structures made out of filamentary CM, and a procedure is proposed for the rational design of reinforced structures.As an example of the tests for stability of cylindrical shells made out of aluminum-magnesium alloy under external pressure, the legitimacy of the cause of the disagreement between the calculated and experimental critical loads, which consists of a discrepancy in the nature of wave formation at the instant of stability loss and initial imperfections, and the effectiveness of the computational method based on a limiting state are confirmed. Refined computational formulas for the critical loads of cylindrical shells made out of fiberglass, carbon fiber, and boraluminum under typical kinds of loading are proposed within the framework of the method and on the basis of an analysis of the results of tests, and a comparison is made of the effectiveness of the reinforcement of shells made out of aluminum-magnesium alloy and carbon fiber. The values of the safety coefficients of structures which guarantee their reliability are determined.Translated from Mekhanika Kompozitnykh Materialov, No. 2, pp. 262–271, March–April, 1980.     

Deformation of cylindrical composite shells under combined dynamic loading

Conclusions A procedure has been shown for calculating the stress-strain state of cylindrical multilayer shells made from composite materials under the combined action of dynamic axial compression and dynamic external pressure, as well as with different variants of combined loading with static and dynamic forces. An investigation has been made of the effect on the mode of the buckled shell surface of the ratio of the application rate of dynamic loads; ranges of loading rates have been established in which stresses predominate caused either by axial compression or external pressure. It has been shown that, as a result of preliminary static loading, a marked change occurs in the initial imperfections of the shell mode which affects subsequent dynamic buckling. To calculate the time when the first defect occurs and its location in the shell body, a procedure has been devised for layer-by-layer strength analysis employing a tensor-polynomial criterion. It was demonstrated that the level of preliminary static loading noticeably affects the time until the first failure of the layer, not only a reduction of this time being possible with an increase in the static loads, but also an increase in it.We should also point out the work in [10] where it is shown that it is possible to weaken the susceptibility of the shell to initial imperfections when internal pressure is applied.Translated from Mekhanika Kompozitnykh Materialov, No. 3, pp. 461–473, May–June, 1981.     

Mechanical and thermal postbuckling of shear-deformable FGM plates with temperature-dependent properties

An analytical approach to investigating the stability of simply supported rectangular functionally graded plates under in-plane compressive, thermal, and combined loads is presented. The material properties are assumed to be temperature-dependent and graded in the thickness direction according to a simple power-law distribution in terms of volume fractions of constituents. The equilibrium and compatibility equations for the plates are derived by using the first-order shear deformation theory of plates, taking into account both the geometrical nonlinearity in the von Karman sense and initial geometrical imperfections. The resulting equations are solved by employing the Galerkin procedure to obtain expressions from which the postbuckling load–deflection curves can be traced by an iterative procedure. A stability analysis performed for geometrically midplane-symmetric FGM plates shows the effects of material and geometric parameters, in-plane boundary conditions, temperature-dependent material properties, and imperfections on the postbuckling behavior of the plates.     

热-压电效应对轴压混合层合圆柱曲板后屈曲的影响

基于Karman-Donnell型非线性壳体方程，给出带压电作动器混合层合圆柱曲板在机械荷载、电荷载和热荷载作用下的后屈曲分析．假定温度场为均匀分布，电场仅有沿板厚方向的分量Ez，且假定材料性能常数与温度和电场的变化无关。将壳体屈曲的边界层理论推广到混合层合圆柱曲板受复合荷载作用的情况.相应的奇异摄动法用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径.分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响．数值算例给出完善和非完善，含整体覆盖或内埋压电作动器正交铺设层合圆柱曲板的后屈曲平衡路径。讨论了温度变化、控制电压、铺层方式、面内边界条件和初始几何缺陷等各种参数变化的影响。     

Postbuckling of a shear-deformable anisotropic laminated cylindrical shell under external pressure in thermal environments

A postbuckling analysis is presented for a shear-deformable anisotropic laminated cylindrical shell of finite length subjected to external pressure in thermal environments. The material properties are expressed as linear functions of temperature. The governing equations are based on Reddy’s higher-order shear-deformation shell theory with the von Karman-Donnell-type kinematic nonlinearity. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. The boundary-layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling region, and the initial geometric imperfections of the shell, is extended to the case of shear-deformable anisotropic laminated cylindrical shells under lateral or hydrostatic pressure in thermal environments. The singular perturbation technique is employed to determine the interactive buckling loads and postbuckling equilibrium paths. The results obtained show that the variation in temperature, layer setting, and the geometric parameters of such shells have a significant influence on their buckling load and postbuckling behavior. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 6, pp. 789–822, November–December, 2007.     

复合材料层合剪切圆柱曲板在侧压作用下的后屈曲

基于Reddy高阶剪切变形理论的Kármám-Donnell型非线性壳体方程,给出复合材料层合剪切圆柱曲板在侧压作用下的后屈曲分析。将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。相应的奇异摄动法,用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径。分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善,中等厚度正交铺设层合圆柱曲板的后屈曲荷载-挠度曲线。讨论了横向剪切变形,曲板几何参数,铺层数,铺展方式和初始几何缺陷等各种参数变化的影响。     

Optimization of cylindrical composite shells with regard to their critical mode of imperfections

This study deals with the optimum design of composite shells under external pressure with material strength and loss of stability according to the critical mode of imperfections taken as the failure criterion. The problem of optimum design is solved and the critical mode is obtained by nonlinear optimum programming for which the geometric and initial imperfection parameters are treated as variables. Numerical results are obtained for a cylindrical composite shell supported freely at its ends. The effect of shear forces between layers on the load-carrying capacity of the shell is also investigated.Presented at the 10th International Conference on the Mechanics of Composite Materials (Riga, April 20–23, 1998).Translated from Mekhanika Kompozitnykh Materialov, Vol. 34, No. 5, pp. 613–620, September–October, 1998.     

湿热环境中复合材料层合圆柱薄壳屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响。基于细观力学模型复合材料性能与湿度和温度变化有关。壳体控制方程基于经典层合壳理论,并包括湿热效应。壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径。分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为。讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响。     

湿热环境中复合材料层合圆柱薄壳的屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响.基于细观力学模型复合材料性能与湿度和温度变化有关.壳体控制方程基于经典层合壳理论,并包括湿热效应.壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径.分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响.数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为.讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响.     

非完善加筋圆柱壳在外压和热荷载共同作用下的后屈曲

基于壳体屈曲的边界层理论,本文给出有限长加筋圆柱壳在侧向外压和均布热荷载共同作用下的后屈曲分析。分析中同时考虑壳体非线性前屈曲变形,大挠度和初始几何缺陷的影响。肋条的处理采用“平均刚度”法。采用奇异摄动方法导得壳体屈曲载荷关系曲线和后屈曲平衡路径,并给出完善和非完善,纵向加筋或环向加筋圆柱壳数值算例。     

Investigation of the initial imperfections and buckling modes of glass-reinforced plastic shells under hydrostatic pressure

The results of testing the stability of glass-reinforced plastic cylindrical shells under hydrostatic pressure are examined. The initial imperfections and deflections of the shells were directly measured. It is found that during loading or in the course of time (under load) the shape of the initial imperfections is transformed. An algorithm (see [11]) based on the approximation of the experimental deflection function by a Fourier series is used to establish the characteristic coefficients of the series important in connection with the elastic loss of stability and progressive buckling of the shell.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 6, pp. 1057–1063, November–December, 1971.     

Elastic buckling of an axially compressed open circular cylindrical shell

The paper is devoted to stability problem of an axially compressed open elastic circular cylindrical shell. Two curvilinear edges of the open cylindrical shell are simply supported while two straight edges are free. Two load cases of the shell are assumed. The first load case ‐ was the invariable axially normal force intensity, and the second load case ‐ the linearly varying axially normal force intensity. Critical loads of the shell for both load cases are determined. These critical loads are compared with a classical load for closed circular cylindrical shell. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Stability of Conical Shells of Metal Composites Beyond the Elastic Limit

The equations for integral instantaneous characteristics of composite materials consisting of elastoplastic fibers and matrix are derived based on the known hypotheses of uniform strain or stress fields. The constitutive relations for a layered shell are obtained. The numerical algorithm elaborated is used to solve the stability problem for conical boron-aluminum shells under external pressure and axial compression. It is shown that the shells of medium thickness lose their stability under loads whose magnitude depends on the plasticity of the binder. The plasticity has a decisive influence on the choice of the optimum directions of reinforcement. If the parameters of a shell are such that the buckling occurs beyond the elastic limit, the shell must be reinforced in the direction of precritical stresses. However, this is possible only upon separate action of loads.     

The influence of original imperfections on the equilibrium states of physically nonlinear panels

The influence of original imperfections, curvature of the panels, and the level of growth of plastic deformations on the equilibrium states of longitudinally compressed cylindrical panels have been studied. The physical relationships were established on the basis of the theory of localized deformations. It has been found that original imperfections substantially lower the upper critical stresses in the zone of elastic and slowly growing plastic deformations, depending on the curvature parametera/R. In a zone of growing plastic deformations, the solution according to nonlinear shell theory approximates the solution according to linear shell theory, and change of curvature of the panels does not cause a sharp increase of the upper critical stress as occurs in a zone of plastic deformations.Institute for Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 345–351, March–April, 1970.     

Dynamic stability of a porous cylindrical shell

This paper is devoted to a closed cylindrical shell made of a porous-cellular material. The mechanical properties vary continuously on the thickness of a shell. The mechanical model of porosity is as described as presented by Magnucki, Stasiewicz. A shell is simply supported on edges. On the ground of assumed displacement functions the deformation of shell is defined. The displacement field of any cross section and linear geometrical and physical relationships are assumed in cylindrical coordinate system. The components of deformation and stress state were found. Using the Hamilton's principle the system of differential equations of dynamic stability is obtained. The forms of unknown functions are assumed and the system of a differential equations is reduced to a simple ordinary equation of dynamic stability of shell (Mathieu's equation). The derived equation are used for solving a problem of dynamic stability of porous-cellular shell with intensity of load directed in generators of shell. The critical loads are derived for a family of porous shells. The unstable space of family porous shells is found. The influence a coefficient of porosity on the stability regions in Figures is presented. The results obtained for porous shell are compared to a homogeneous isotropic cylindrical shell. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Mechanical stability of functionally graded stiffened cylindrical shells

This paper is concerned with the elastic buckling of stiffened cylindrical shells by rings and stringers made of functionally graded materials subjected to axial compression loading. The shell properties are assumed to vary continuously through the thickness direction. Fundamental relations, the equilibrium and stability equations are derived using the Sander’s assumption. Resulting equations are employed to obtain the closed-form solution for the critical buckling loads. The results show that the inhomogeneity parameter and geometry of shell significantly affect the critical buckling loads. The analytical results are compared and validated using the finite element method.     

The effect of the batdorf parameter on the post-critical behaviour of an axially compressed imperfect cylindrical shell

The loss of stability and post-critical behaviour of a geometrically imperfect elastic cylindrical shell subjected to axial compression at moveable hinged endfaces are asymptotically analysed in the limit as Z → ∞ (where Z is the Batdorf parameter). The asymptotic behaviour of the eigenvalues and associated vectorial eigen-functions, linearized about a torqueless solution of the boundary-value problem are constructed when Z → ∞. The Lyapunov-Schmidt method is applied in the neighbourhood of each eigenvalue for which the asymptotic behaviour has been determined. For Z → ∞ equilibrium eigenshapes that are odd with respect to the axial coordinate are shown to be unstable (the Koiter parameter b < 0), and the even ones (b 0) are shown to be stable. It is shown that by an appropriate choice of initial imperfection the upper critical load for shell loss of stability (the limiting point) can be made to correspond to any of the close to (Z → ∞) critical loads for loss of stability of an ideal shell.     

The possibility of a theoretical confirmation of the experimental values of the external critical pressure of thin-walled cylindrical shells

The problem of the buckling of elastic, isotropic, thin-walled cylindrical shells with small initial shape defects that are under the action of an external pressure is solved in a geometrically non-linear formulation. Equations that are identical to Marguerre's equations for a shallow cylindrical shell are used in formulating the problem. The solution is constructed by the Rayleigh–Ritz method with the points of the middle surface of the shell approximated by double functional sums over trigonometric and beam functions. The system of non-linear equations obtained is solved by arc-length methods. Cases of the clamped and supported shells when loading with a lateral and uniform hydrostatic pressure are considered. Its deflections from the limit points of the postbuckling branches of its loading trajectory are used as the initial imperfections. An inspection of the different forms of the initial imperfections when they have maximum values of up to 30% of the shell thickness made it possible to obtain practically the whole range of experimentally found critical pressures.     

粘弹性柱壳的若干动力学性质

本文讨论了轴向压力和一致分布的径向压力作用下粘弹性柱壳的动力稳定性问题.利用Laplace变换,得到了常载作用下粘弹壳的稳定性条件.综合利用动力学的经典方法,得到了由粘弹性壳所定义的动力系统的各种动力学性质及各种参数对结构稳定性的影响.