Infrared Spectroscopy and X-Ray Diffraction Studies on the Structure and Thermal Behavior of Biodegradable Polyhydroxyalkanoates

The structure and thermal behavior of new types of bacterial copolyester, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate); P(HB-co-HHx) (HHx=2.5, 3.4, and 12 mol %) have been explored by means of wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), and infrared (IR) spectroscopy. The WAXD pattern of P(HB-co-HHx) (HHx=12 mol %) copolymer measured at room temperature has revealed that it has an orthorhombic system (α=β=γ=90°) with a=5.76Å, b=13.20Å, c=5.96Å (fiber repeat), which is identical to that of poly(3-hydroxybutyrate) (PHB). It has been found from the temperature-dependent variations of the WAXD pattern that only the a lattice parameter shows the thermal expansion, while the b lattice parameter changes little with temperature in the crystalline P(HB-co-HHx) (HHx=12 mol %). This observation suggests that there are inter and intramolecular interactions between C=O groups and alkyl groups along the a axis and that interactions are broken little by little with temperature. IR spectra were measured for the four kinds of polymers over a temperature range from 30°C to high temperatures (200°C; PHB, 180°C; P(HB-co-HHx) (HHx=2.5 mol %), 180°C; P(HB-co-HHx) (HHx=3.4 mol %), 150°C; P(HB-co-HHx) (HHx=12 mol %)). Temperature-dependent IR spectral variations were analyzed for the CH, C=O, and C-O-C stretching band regions, and bands characteristic of crystalline and amorphous parts were identified in each region. It has been found from the IR study that the strength of interaction between the C=O group and the CH₃ (or CH₂) group is similar among the four polymers and that the population of C=O groups that are not involved in the interaction becomes higher with the increase in HHx. Both WAXD and IR studies have revealed that the crystallinity of P(HB-co-HHx) (HHx=12 mol %) decreases gradually starting from relatively low temperature (about 60°C) while that of PHB remains high up to 170°C.     

Influence of Phase Morphology on Molecular Mobility of Poly(propylene)-(ethylene-vinyl acetate) Copolymer Blends

The dynamic mechanical and dielectric behaviours of Polypropylene (PP) and (Ethylene-Vinyl Acetate) Copolymer (EVA) blends are reported as a function of the morphology. For EVA contents lower than 20%, blends show the two-phase morphology characteristic of immiscible blends, with spherical EVA droplets finely dispersed in the PP matrix. After stretching in the molten state, the morphology of EVA fibers is observed. Mechanical Relaxation Spectroscopy display three relaxation processes: the EVA and PP α-relaxations associated to the glass transitions and a β-transition corresponding to a PP crystalline phase relaxation. The PP α-relaxation shifts to higher temperatures when EVA presents a fiber morphology, corresponding to a decrease of PP chain mobility since it is hindered by the reinforcement effect of EVA fibers. Quite different results are obtained by DRS analysis. In blends containing EVA fibers, only one main relaxation associated to the EVA α-transition is observed whereas one additional relaxation can be noticed in the blends containing EVA droplets. This new relaxation might be assigned to interfacial polarization effects, phenomena that are sometimes observed in heterogeneous polymer blends when a low content of one polar component is embedded in a non conductive matrix. In this case, the occurrence of a characteristic interfacial polarization relaxation appears to be correlated to the accessible experimental frequency.     

线性低密度聚乙烯和聚苯乙烯共混物的原位增容及其形态、结构和性能

反应挤出;线性低密度聚乙烯和聚苯乙烯共混物的原位增容及其形态、结构和性能     

Sulfur Compounds. 164 Thermal Polymerization of the Cyclic Seleniumsulfide 1,2-Se2S5 Studied by DSC,HPLC, Raman Spectroscopy,and X-Ray Diffraction

Solid 1,2-Se₂S₅ polymerizes endothermically at 47°C to give a linear polymer which after stretching and extraction consists of helical molecules similar to those of polymeric sulfur. Heating of the polymer results in slow exothermic depolymerization at 84°C to give a mixture of seven cyclic Se_nS_8–n molecules which melts at 111°C. When the polymeric Se₂S₅ is refluxed with CS₂ the initial depolymerization Products are 1,2-Se₂S₅, SeS₅ and 1,2,3-Se₃S₅ but in addition SeS₇ and 1,2-Se₂S₆ are formed. These results indicate the atomic sequence –Se? S₅? Se– in the polymer. The powder x-ray diffraction pattern and Raman spectrum of the polymer as well as its lattice parameters are reported and the Probable mechanism of its depolymerization is discussed.     

Silver Molecularly Imprinting Polymer for the Determination of p-Nitroaniline by Surface Enhanced Raman Scattering

Molecular imprinting and surface enhanced Raman scattering (SERS) were used to prepare a core-shell Ag@molecularly imprinting polymer (MIP) for the determination of p-nitroaniline. The obtained Ag@MIP exhibits a detection limit of 10^?12 M, which demonstrates higher sensitivity toward p-nitroaniline than conventional approaches. In addition, the Ag@MIP shows good recyclability, and simultaneously offers better stability and high SERS activity for recognizing target molecules. To characterize the high SERS activity of the SERS-MIP hybrid material, a possible mechanism for the SERS substrate is proposed involving enhancement by the MIP. This study is expected to provide an alternative approach for the determination of p-nitroaniline in aqueous environments.     

Effects of Electron Beam Irradiation on the Structural Properties of PVA/PAM/CMC Ternary Polymer Blends

Ternary miscible blends based on various ratios of poly(vinyl alcohol) (PVA), poly(acrylamide) (PAM) and carboxymethyl cellulose (CMC) were prepared by solution casting in the form of thin films. The structure‐property behavior of the ternary PVA/PAM/CMC blends, before and after they had been exposed to various doses of electron beam irradiation, was investigated by FT‐IR spectroscopy, SEM, XRD and stress‐strain curves. The visual observation showed that the cast films of the individual polymers PVA, PAM, and CMC and their blends over a wide range of composition are clear and transparent indicating the miscibility of PVA/PAM/CMC ternary blends. The FT‐IR analysis of pure polymers or their ternary blends before or after electron beam irradiation proved the formation of hydrogen bonding. In addition, it was found that the intensity of the different absorption bands depends on the ratio of PAM and CMC in the ternary blend. The XRD patterns showed that the peak position for the ternary blends decreases with increasing the ratio of CMC in the blend. However, the peak position for the ternary blend based on equal ratios of pure polymers was not affected by blending and was found in the same position as in the XRD pattern of pure PVA. The SEM micrographs give support to the visual observation indicating the complete miscibility of PVA/PAM/CMC ternary blends. The improvement in morphology leads to improvement in the tensile mechanical properties of the ternary polymer blends.     

Properties,Morphology and Structure of BPDA/PPD/TFMB Polyimide Fibers

The mechanical properties of fibers were notably improved by incorporating 2,2′-bis(trifluoromethyl)- benzidine(TFMB) into 3,3′,4,4′-biphenyltetracarboxylic dianhydride(s-BPDA) and p-phenylenediamine(PPD) backbone. The best strength and modulus of BPDA/PPD/TFMB polyimide(PI) fiber(diamine molar ratio of PPD/TFMB= 90/10) were 1.60 and 90 GPa, respectively, which was over two times that of BPDA/PPD PI fiber. SEM image showed that the cross-section of fibers at each stage was round and voids free. Besides, the “skin-core” and microfibrillar structure were not observed. The thermal properties of PI fibers were also investigated. The results showed that the fibers owned excellent thermal stability, moreover, the structural homogeneity of fibers were significantly improved by heat-drawn stage. The T_g values were found to be around 300℃ by dynamic mechanical analysis(DMA). Wide angle X-ray diffraction(WAXD) and small angle X-ray scattering(SAXS) experiments indicated that the order degree of longitudinal and lateral stacks, the molecular orientation and the structural homogeneity of fibers were improved in the preparation process of fibers.     

超高分子量聚乙烯增强聚丙烯共混体系的力学性能、亚微相态和增韧机理的研究进展

综述了作者所在课题小组在超高分子量聚乙烯（UHMWPE）增韧增强聚丙烯（PP）共混体系研究领域中所取得的成果、研究进展及增韧增强机理。该成果将为提高通用型塑料PP的综合力学性能提出一种新的方法及机理,从而实现通用塑料高性能化和工程塑料化的目标。     

Preparation,Morphology, and Structure of Thermotropic Liquid Crystalline Polyester-imide/Phenol-formaldehyde Resin Blends

As a novel toughening agent, thermotropic liquid crystalline polymers (TLCPs) possess excellent properties of high strength, high modulus, low expanding coefficient, and high thermal stability. In this study, a thermotropic liquid crystalline poly(ester-imide) derived from N,N’-hexane-1,6-diylbis(tri-millitimide) (IA6), p-hydroxylbenzoic acid (PHB), and 4,4’-dihydroxybenzophenone (DHBP) was synthesized by the Higashi's direct polycondensation method. The structure and properties of the TLCP were studied using Fourier transformed infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermogravimetic analyses (TGA), polarized light microscopy (POM), and wide angle X-ray diffraction (WAXD). The results revealed that the synthesized polyester-imide is a nematic TLCP with good thermal stability and its starting decomposition temperature is up to 439°C. Additionally, polymer blends of phenol-formaldehyde (PF) resin with different contents of polyester-imide were prepared and characterized by POM and WAXD. POM results demonstrated that two-step blending is an ideal method for blending TLCP and PF resin. By this method, continuous filamentous stripes can be clearly observed at 230°C for TLCP/PF blend of 10 wt% poly(ester-imide).     

聚酯／改性共聚酯共混体系的相分离及其共混纤维的结构和性能

本文研究聚酯(PET)和含3.5-二甲酸苯磺酸钠(SIPM)结构单元的改性共聚酯(PEI)的共混体系。差示扫描量热分析,X射线衍射分析,染色后的透射和扫描电镜照片等均表明该体系是一个热力学不相溶的体系。在加工成形过程中,特别是在结晶过程中,富PEI相中的SIPM结构单元被排斥在晶格之外形成集簇形态,利用这种相分离的结构形态以及改性共聚酯优先水解的机理,PET/PEI共混纤维经碱水解处理后可制得微孔型的高吸水吸湿纤维。本文讨论了相分离结构对该微孔型纤维的微孔尺寸分布,吸湿保水性能以及纤维力学性能的影响。     

光致电子转移对Rhodamine 6G基态分子结构影响的非共振Raman光谱研究

基于非共振Raman 光谱和量子化学计算, 研究了在纯电子给体N,N-二乙基苯胺(DEA)溶剂中Rhodamine 6G (Rh6G⁺)基态分子结构的变化, 这有利于理解该体系中的光致分子间电子转移(PIET). 与PIET相耦合的所有振动模式已被确定和指认. 结果表明: 对应于氧杂蒽环且位于675 cm^-1处最主要的振动模式对PIET 有着至关重要的贡献; 通过与电荷转移复合物(Rh6G/DEA⁺)的发色团芳香族环的C―C伸展振动模式作比较, C=C伸展振动对PIET的影响更敏感. 本文的研究工作能为具有合适电子转移特性的光伏器件中分子结构或溶剂环境的设计提供新颖的观点.     

Effects of Compositions and Processing Variables on Barrier and Mechanical Properties of Liquid Crystalline Polymer/Polyethylene Blend Films

Cast films of liquid crystalline polymer (LCP) and low density polyethylene (LDPE) blends have been produced and investigated. Effects of LCP content and processing parameters, i.e., processing temperature profile, screw speed, and post-die drawing, on morphology and O₂ barrier property are presented. Increasing processing temperature and LCP content tend to enhance aspect ratios (L/D) of the LCP dispersed phase and at the same time influencing LCP structure. These effects are clearly observed when LCP content is increased from 10 % to 30 % by wt. At high temperature profiles, LCP morphologies are presented in a more or less ‘ribbon’ or ‘tape’ like structure together with a common LCP fibrillar structure. Films of 10% and 30% LCP produced at two optimum temperature profiles show a noticeable proportion of LCP tape-like structure and interestingly high barrier properties of ∼1.6 and 5.5 times that of the neat LDPE films. High barrier characteristics of such LCP/PE blend films are indicated by low oxygen transmission rate values. Apart from processing temperature effect, increases of screw speed result in films having smaller aspect ratios for both LCP fibers and ribbons; films also exhibit poorer barrier and mechanical properties. However, post-die drawing clearly demonstrates a positive effect in improving aspect ratios of the LCP domains and the resulting films' moduli. Effects of post-die drawing on enhancing films' barrier properties become more pronounced at high LCP content. By comparing with the neat LDPE film (30 μm thick) having modulus of ∼180 MPa and OTR of ∼11000 cc/m².day, the developed LCP/PE films containing 30 wt% LCP show remarkably high modulus values of ∼1100 MPa with low OTR of ∼2000 cc/m².day.     

AFM‐Correlated CSM‐Coupled Raman/Fluorescence Studies on Selective Interactions of Water Soluble Porphyrins with DNA

The Raman and fluorescence spectroscopic properties of water‐soluble oxo‐titanium(IV) mesotetrakis (1‐methyl pyridium‐4‐yl) porphyrin (O=Ti(TMPyP)⁴⁺) bound with calf thymus DNA and artificial DNAs such as double stranded poly[d(A‐T)₂] and poly[d(G‐C)₂] have been investigated on the single DNA molecule basis by AFM‐correlated confocal scanning microscope (CSM)‐coupled Raman and fluorescence spectroscopic techniques as well as the ensemble‐averaged spectroscopy. The ensemble‐averaged spectroscopic studies imply that the porphyrin interacts with DNA in different groove binding patterns depending on the base pairs. AFM‐images of the different DNAs bound with O=Ti(TMPyP)⁴⁺ were measured, and their morphologies are found to depend on kind of base pairs interacting with O=Ti(TMPyP)⁴⁺. Being correlated with the AFM images, the CSM‐coupled Raman and fluorescence spectral properties of the three different single O=Ti(TMPyP)⁴⁺‐DNA complexes were observed to be highly resolved and sensitive to base pair‐dependent axial ligation of Ti‐O bond as compared to the corresponding ensemble‐averaged spectral properties, which affect the groove binding and its strength of the O=Ti(TMPyP)⁴⁺ with DNA. The axial ligation was found to be accompanied by vibration structural change of the porphyrin ring, leading to keep the shape of double stranded poly[d(A‐T)₂] rigid while poly‐[d(G‐C)₂] and calf thymus DNA flexible after binding with the oxo‐titanyl porphyrin. The base pair dependence of the fluorescence decay times of the DNA‐bound porphyrins was also observed, implying that an excited‐state charge transfer takes place in the G‐C rich major groove in calf thymus DNA. These results suggest that binding of O=Ti(TMPyP)⁴⁺ is more preferential with the G‐C rich major groove than with the A‐T rich minor groove in calf thymus DNA so that the morphology of DNA is changed.     

聚{吡咯-2,5-二[(对二甲氨基)苯甲烯]}的电化学和原位拉曼光谱

采用电化学循环伏安法（CV）和原位拉曼光谱（in situ Raman）对窄能隙共轭高分子聚{吡咯 2,5 二[(对二甲氨基)苯甲烯]}（PPDMABE）的电化学行为进行了研究.结果表明,在不同pH值NaNO3溶液中, PPDMABE的电化学氧化还原过程中存在吡咯环的氧化态结构与芳式和醌式结构之间的转变.聚合物在氧化态时吡咯环主要以氧化态存在,而还原态以芳式和醌式结构吡咯环为主.PPDMABE在酸性和中性介质中氧化态吡咯环以质子化的状态存在,而在碱性溶液中氧化态吡咯环既有质子化态,又有去质子化态的.在酸性条件下,PPDMABE较易发生氧化还原反应,而在碱性条件还原反应则较难发生.     

Study on the Structure of a Mixed KCl and K2SO4 Aqueous Solution Using a Modified X-ray Scattering Device,Raman Spectroscopy,and Molecular Dynamics Simulation

The microstructure of a mixed KCl and K₂SO₄ aqueous solution was studied using X-ray scattering (XRS), Raman spectroscopy, and molecular dynamics simulation (MD). Reduced structure functions [F(Q)], reduced pair distribution functions [G(r)], Raman spectrum, and pair distribution functions (PDF) were obtained. The XRS results show that the main peak (r = 2.81 Å) of G(r) shifted to the right of the axis (r = 3.15 Å) with increased KCl and decreased K₂SO₄. The main peak was at r = 3.15 Å when the KCl concentration was 26.00% and the K₂SO₄ concentration was 0.00%. It is speculated that this phenomenon was caused by the main interaction changing, from K-O_W (r = 2.80 Å) and O_W-O_W (r = 2.80 Å), to Cl⁻-O_W (r = 3.14 Å) and K⁺-Cl⁻ (r = 3.15 Å). According to the trend of the hydrogen bond structure in the Raman spectrum, when the concentration of KCl was high and K₂SO₄ was low, the destruction of the tetrahedral hydrogen bond network in the solution was more serious. This shows that the destruction strength of the anion to the hydrogen bond network structure in solution was Cl⁻ > SO₄²⁻. In the MD simulations, the coordination number of O_W-O_W decreased with increasing KCl concentration, indicating that the tetrahedral hydrogen bond network was severely disrupted, which confirmed the results of the Raman spectroscopy. The hydration radius and coordination number of SO₄²⁻ in the mixed solution were larger than Cl⁻, thus revealing the reason why the solubility of KCl in water was greater than that of K₂SO₄ at room temperature.     

Neutron Diffraction and TEM Studies of the Crystal Structure and Defects of Nd4Ni3O8

Powder neutron diffraction and electron microscopy studies confirmed the crystal structure of Nd₄Ni₃O₈(space groupI4/mmm;a=b=3.9168(2) Å,c=25.322(2) Å,Z=4; reliability factorsR_p=0.125,R_wp=0.108,χ²=2.81,R_Bragg=0.043,R_F=0.037) previously determined by powder X-ray diffraction [Ph. Lacorre,J. Solid State Chem.97, 495 (1992)]. It consists in the intergrowth between triple layers of nickel in square planar coordination with Nd in cubic coordination (infinite layer type) and fluorite type layers. Nd₄Ni₃O₈is thus the first known compound with a triple T′ type structure (relative to the single T′ type structure of Nd₂CuO₄). A study of the coherent diffraction lengths and defects in the structure has been carried out. Two kinds of defects have been detected by HREM, for which a model is proposed.     

Structural and Electrical Properties of Sol–Gel-processed CdTiO3 Powders and Films

Cadmium titanate, CdTiO₃, was prepared by the sol–gel technique in bulk and in thin film form. The thermal evolution of the gels and the phase changes were studied by thermo- gravimetric analysis (TGA), X-ray diffractometry (XRD) and Raman and energy-dispersive (EDS) spectroscopies. The morphology of the samples was observed using scanning electron microscopy (SEM). Gels heated to 800 °C gave rise to powders with only the ilmenite-like phase. The orthorhombic perovskite phase is the only crystalline phase observed after a 4 h heat-treatment at 1100 °C. With respect to the conventional preparation method by solid-state reaction, by the sol–gel method it is possible to prepare the ilmenite phase at lower temperatures and the perovskite phase in a shorter time. Clear, homogeneous thin films were obtained by the dip-coating method. The refraction index and the thickness of the films were measured using ellipsometry. The humidity-sensitive electrical properties were measured for thin films deposited on alumina substrates with comb-type gold electrodes, heated to 200 °C and 450 °C. The films heated to 200 °C, which still contained organics, showed a variation of the resistance of six orders of magnitude in the relative humidity (RH) range tested (4–87% RH). The films heated to 450 °C, made of ilmenite-type CdTiO₃, were nearly insensitive to RH. © 1997 by John Wiley & Sons, Ltd.     

A SEM/EDXA study on the chemical attack of aqueous NaOH/KOH solutions on the surface of the metal-metalloid glass (Fe, Cr)80 (P, C, Si)20 and Fe75Cr5P8C10Si2, respectively

After a treatment of the metal-metalloid glassy alloy (Fe, Cr)₈₀ (P, C, Si)₂₀ and Fe₇₅Cr₅P₈C₁₀Si₂, respectively, by aqueous alkaline solutions of 1.0M NaOH + 1.0M KOH and 2.5M NaOH + 2.5M KOH, respectively, a SEM/EDXA study of the glass surface was performed.The results of the accelerated ageing procedure demonstrate that the glass treated with the 1.0M NaOH + 1.0M KOH solution at room temperature (20 °C) is characterized by a surface state like that of the initial material.For the glass treatment with the 2.5M NaOH + 2.5M KOH solution at 20 °C the surface layer shows a different morphology and is thicker. It can be supposed that the reinforcing property is reduced.The glass treatment at 80 °C with the aqueous solutions 1.0M and 2.5M (NaOH + KOH), respectively, leads to surface layers of different morphology and such a layer is about 5 m thick. The strength of solid residue of such a treated glass is very low.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday