Structural Characterization of Biomaterials by Means of Small Angle X-rays and Neutron Scattering (SAXS and SANS), and Light Scattering Experiments

Scattering techniques represent non-invasive experimental approaches and powerful tools for the investigation of structure and conformation of biomaterial systems in a wide range of distances, ranging from the nanometric to micrometric scale. More specifically, small-angle X-rays and neutron scattering and light scattering techniques represent well-established experimental techniques for the investigation of the structural properties of biomaterials and, through the use of suitable models, they allow to study and mimic various biological systems under physiologically relevant conditions. They provide the ensemble averaged (and then statistically relevant) information under in situ and operando conditions, and represent useful tools complementary to the various traditional imaging techniques that, on the contrary, reveal more local structural information. Together with the classical structure characterization approaches, we introduce the basic concepts that make it possible to examine inter-particles interactions, and to study the growth processes and conformational changes in nanostructures, which have become increasingly relevant for an accurate understanding and prediction of various mechanisms in the fields of biotechnology and nanotechnology. The upgrade of the various scattering techniques, such as the contrast variation or time resolved experiments, offers unique opportunities to study the nano- and mesoscopic structure and their evolution with time in a way not accessible by other techniques. For this reason, highly performant instruments are installed at most of the facility research centers worldwide. These new insights allow to largely ameliorate the control of (chemico-physical and biologic) processes of complex (bio-)materials at the molecular length scales, and open a full potential for the development and engineering of a variety of nano-scale biomaterials for advanced applications.     

Adsorption behavior of partially collapsed polyacrylate coils on mica surfaces: A reciprocal space approach

In this article, we investigate tapping mode atomic force microscopy images of intermediate states along the coil to globule transition of sodium polyacrylate coils containing Ca²⁺ as specifically binding ions. The structural correlations within single adsorbed molecules are established using power spectral density (PSD) curves. The PSD curves of several single molecules are averaged to give the so called 2D form factor so as to obtain information of higher statistical merit. A proper interpretation of the 2D form factor and comparison with form factor analysis of the very same sample solution available through small angle neutron scattering provides an alternative quantification of changes in conformation which a single polyacrylate molecule undergoes as it moves from 3D solution to 2D surface and is inevitably distorted in shape because of sample history. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1553–1561, 2010     

SANS investigations of oxide gel formation in inverse micelle and lamellar surfactant systems

The mechanisms of oxide gel formation in inverse micelle and lamellar surfactant systems have been investigated by Small Angle Neutron Scattering (SANS). In the first of these processes colloidal particles and gels are formed by the controlled hydrolysis and condensation of metal alkoxides in a reversed microemulsion system (water in oil), where the water is confined in the microemulsion core. With this route the rate of formation and structure of the oxide gel can be controlled by appropriate choice of the surfactant molecule (e.g. chain length) and the volume fraction of the micelles dispersed in the continuous organic phase. Investigations have been made with the system cyclohexane/water/C₈E _x , where C₈E _x is the non-ionic surfactant octylphenyl polyoxyethylene. The influence of the size and structure of the microemulsion has been studied by contrast variation (using deuterated solvents) before and during the reaction to form zirconia gels, and the mechanism of gelation is analysed in terms of percolation of fractal cluster aggregates. The structure of gels formed in surfactant/water lamellar phase systems, using surfactants with greater chain length, has also been investigated by SANS. The application of contrast variation to study such anisotropic bilayer systems, in which oriented gel films can be formed, is illustrated.     

Crystallization and chain conformation of semicrystalline and amorphous polymer blends studied by wide‐angle and small‐angle scattering

We examine the crystallization and chain conformation behavior of semicrystalline poly(ethylene oxide) (PEO) and amorphous poly(vinyl acetate) (PVAc) mixtures with wide‐angle X‐ray diffraction (WAXD), small‐angle X‐ray scattering (SAXS), and small‐angle neutron scattering (SANS) experiments. For blends with PEO weight fractions (wt_PEO) greater than or equal to 0.3, below the melting point of PEO, the WAXD patterns reveal that crystalline PEO belongs to the monoclinic system. The unit‐cell parameters are independent of wt_PEO. However, the bulk crystallinity determined from WAXD decreases as wt_PEO decreases. The scattered intensities from SAXS experiments show that the systems form an ordered crystalline/amorphous lamellar structure. In a combination of WAXD and SAXS analysis, the related morphological parameters are assigned correctly. With the addition of amorphous PVAc, both the average amorphous layer thickness and long spacing increase, whereas the average crystalline layer thickness decreases. We find that a two‐phase analysis of the correlation function from SAXS, in which the scattering invariant is linearly proportional to the volume fraction of lamellar stacks, describes quantitatively the crystallization behavior of PEO in the presence of PVAc. When wt_PEO is close to 1, the samples are fully spaced‐filled with lamellar stacks. As wt_PEO decreases from 1.0 to 0.3, more PVAc chains are excluded from the interlamellar region into the interfibrillar region. The fraction outside the lamellar stacks, which is completely occupied with PVAc chains, increases from 0 to 58%. Because the radius of gyration of PVAc with a random‐coil configuration determined from SANS is smaller than the average amorphous layer thickness from SAXS, we believe that the amorphous PVAc chains still persist with a random‐coil configuration even when the blends form an ordered structure. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2705–2715, 2001     

Entropically driven phase separation of highly branched/linear polyolefin blends

Small‐angle neutron scattering (SANS) was used to examine the melt phase behavior of a heavily branched comb PEE polymer blended separately with two linear PEE copolymers. In this case, PEE refers to poly(ethylene‐r‐ethylethylene) with 10% ethylene units; therefore, the molecular architecture was the only difference between the two components of the blends. The molecular weights of the two linear random copolymers were 60 and 220 kg/mol, respectively. The comb polymer contained an average of 54 long branches, with a molecular weight of 13.7 kg/mol, attached to a backbone with a molecular weight of 10 kg/mol. Three different volume compositions (25/75, 50/50, and 75/25) were investigated for both types of blends. SANS results indicate that all the blends containing the lower molecular weight linear polymer formed single‐phase mixtures, whereas all the blends containing the high molecular weight linear polymer phase‐separated. These results are discussed in the context of current theories for polymer blend miscibility. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2965–2975, 2000     

Effect of solvent additives on bulk heterojunction morphology of organic photovoltaics and their impact on device performance

Morphology of the active layer in an organic photovoltaic (OPV) device is known to have a significant impact on the device performance. It is, however, difficult to characterize nanoscale morphologies in detail, especially at the ensemble level. Herein, we report the utilization of small angle neutron scattering (SANS) to investigate variations in the nanoscale morphologies of the active layer of poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) bulk heterojunction OPV depending on the composition of casting solvent. Both the power law and the poly hard sphere model were utilized to characterize the state of the donor and acceptor components, respectively, from the obtained SANS data. Furthermore, the relationship between the nanoscale morphology and device performance is outlined. It was found that the use of 2-chlorophenol, a poor solvent for P3HT and, at the same time, a very good solvent for PCBM, leads to nanomorphology featuring ordered, highly crystalline P3HT and small (15.2 nm) PCBM domains. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 128–134     

Effect of Polydispersity on the Phase Behavior of Polymer Blends

Summary: The effect of polydispersity on polymer blend phase behavior is studied by in situ small‐angle X‐ray scattering. In a polydisperse polyethylene (PE)/isotactic poly(propylene) (iPP) blend, the enthalpic portion of the interaction parameter is greater than that of a corresponding blend with lower polydispersity. This is attributed to the presence of long chains, which provide a higher interaction energy and packing constraint, reducing the system miscibility. As expected, the radius of gyration is higher in the system with higher polydispersity.

Comparison of phase diagrams of the iPP/PE system used in this study (thin lines) with that obtained from the literature (thick lines). The solid lines represent binodals and the dashed lines are spinodals.     

A small angle neutron scattering and electrochemical impedance spectroscopy study of the nanostructure of the iron chalcogenide glass ion-selective electrode

This paper presents a preliminary structural and interfacial study of the iron chalcogenide glass [i.e., Fe_x(Ge₂₈Sb₁₂Se₆₀)_100−x] ion-selective electrode (ISE) using small angle neutron scattering (SANS) and electrochemical impedance spectroscopy (EIS). SANS detected variations in the neutron scattering as a function of iron content in the chalcogenide glass. Furthermore, a change in the chalcogenide glass structure was observed at elevated iron dopant levels. Conversely, EIS was used to show that the iron chalcogenide membrane comprises various time constants, and the interfacial charge transfer reaction depends on the membrane iron content. Equivalent circuit modeling revealed that the charge transfer resistance decreases at elevated iron levels, and this may be related to the presence of iron defects in the glass. It is proposed that the iron chalcogenide membrane comprises an iron nanostructural network embedded in the amorphous matrix, and this directly influences the electrical conductivity and concomitant electrochemical reactivity of the glass.     

Polymeric Colorants: Statistical Copolymers of Indigo Building Blocks with Defined Structures

Statistical copolymers of indigo ( 1a ) and N‐acetylindigo ( 1b ) building blocks with defined structures were studied. They belong to the class of polymeric colorants. The polymers consist of 5,5′‐connected indigo units with keto structure and N‐acetylindigo units with uncommon tautomeric indoxyl/indolone (=1H‐indol‐3‐ol/3H‐indol‐3‐one) structure (see 2a and 2b in Fig. 1). They formed amorphous salts of elongated monomer lengths as compared to monomeric indigo. The polymers were studied by various spectroscopic and physico‐chemical methods in solid state and in solution. As shown by small‐angle‐neutron scattering (SANS) and transmission‐electron microscopy (TEM), disk‐like polymeric aggregates were present in concentrated solutions (DMSO and aq. NaOH soln.). Their thickness and radii were determined to be ca. 0.4 and ca. 80 nm, respectively. From the disk volumes and by a Guinier analysis, the molecular masses of the aggregates were calculated, which were in good agreement with each other. Defined structural changes of the polymer chains were observed during several‐weeks storage in concentrated DMSO solutions. The original keto structure of the unsubstituted indigo building blocks reverted to the more flexible indoxyl/indolone structure. The new polymers were simultaneously stabilized by intermolecular H‐bonds to give aggregates, preferentially dimers. Both aggregation and tautomerization were reversible upon dissolution. The polymers were synthesized by repeated oxidative coupling of 1,1′‐diacetyl‐3,3′‐dihydroxybis‐indoles 5 (from 1,1′‐diacetyl‐3,3′‐bis(acetyloxy)bis‐indoles 6 ) followed by gradual hydrolysis of the primarily formed poly(N,N′‐diacetylindigos) 7 (Scheme). N,N′‐Diacetylbis‐anthranilic acids 9 were isolated as by‐products.     

Properties,Morphology and Structure of BPDA/PPD/TFMB Polyimide Fibers

The mechanical properties of fibers were notably improved by incorporating 2,2′-bis(trifluoromethyl)- benzidine(TFMB) into 3,3′,4,4′-biphenyltetracarboxylic dianhydride(s-BPDA) and p-phenylenediamine(PPD) backbone. The best strength and modulus of BPDA/PPD/TFMB polyimide(PI) fiber(diamine molar ratio of PPD/TFMB= 90/10) were 1.60 and 90 GPa, respectively, which was over two times that of BPDA/PPD PI fiber. SEM image showed that the cross-section of fibers at each stage was round and voids free. Besides, the “skin-core” and microfibrillar structure were not observed. The thermal properties of PI fibers were also investigated. The results showed that the fibers owned excellent thermal stability, moreover, the structural homogeneity of fibers were significantly improved by heat-drawn stage. The T_g values were found to be around 300℃ by dynamic mechanical analysis(DMA). Wide angle X-ray diffraction(WAXD) and small angle X-ray scattering(SAXS) experiments indicated that the order degree of longitudinal and lateral stacks, the molecular orientation and the structural homogeneity of fibers were improved in the preparation process of fibers.     

Influence of long‐chain branching on the miscibility of poly(ethylene‐r‐ethylethylene) blends with different microstructures

The melt miscibility of two series of poly(ethylene‐r‐ethylethylene) (PE_Exx) polymers with different percentages (xx) of ethylethylene (EE) repeat units was examined with small‐angle neutron scattering (SANS). The first series consisted of comb/linear blends in which the first component is a heavily branched comb polymer (B90) containing 90% EE and an average of 62 long branches with a weight‐average molecular weight (M_W) of 5.5 kg/mol attached to a backbone with M_W = 10.0 kg/mol. The comb polymer was blended with six linear PE_Exx copolymers, all of which had M_W ≈ 60 kg/mol and EE percentages ranging from 55 to 90%; they were denoted L55 to L90, with the number referring to the percentage of EE repeat units. The second series consisted of linear/linear blends; the first component, with M_W = 220 kg/mol and 90% EE, was denoted L90A, and the second components were the same series of linear polymers, with M_W ≈ 60 kg/mol and various EE compositions. The concentrations investigated were 50/50 w/w, except for the blend of branched B90 and linear L90 (both components were 90% EE), for which 25/75 and 75/25 concentrations were also examined. The SANS results indicated that for the comb/linear blends, only the dB90/L90 blends were miscible, whereas the other five blends phase‐separated; for the linear/linear blends, dL90A/L83 and dL90A/L78 were miscible, whereas the other three blends were immiscible. These results indicate that long‐chain branching significantly narrowed the miscibility window of these polyolefin blends. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 466–477, 2002; DOI 10.1002/polb.10102     

Aqueous solution behavior of comb‐shaped poly(2‐ethyl‐2‐oxazoline)

A series of comb polymers consisting of a methacrylate backbone and poly(2‐ethyl‐2‐oxazoline) (PEtOx) side chains was synthesized by a combination of cationic ring‐opening polymerization and reversible addition–fragmentation chain transfer polymerization. Small‐angle neutron scattering (SANS) studies revealed a transition from an ellipsoidal to a cylindrical conformation in D₂O around a backbone degree of polymerization of 30. Comb‐shaped PEtOx has lowered T_g values but a similar elution behavior in liquid chromatography under critical conditions in comparison to its linear analog was observed. The lower critical solution temperature behavior of the polymers was investigated by turbidimetry, dynamic light scattering, transmission electron microscopy, and SANS revealing decreasing T_cp in aqueous solution with increasing molar mass, the presence of very few aggregated structures below T_cp, a contraction of the macromolecules at temperatures 5 °C above T_cp but no severe conformational change of the cylindrical structure. In addition, the phase diagram including cloud point and coexistence curve was developed showing an LCST of 75 °C of the binary mixture poly[oligo(2‐ethyl‐2‐oxazoline)methacrylate]/water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Optical properties and orientation in polyethylene blown films

We report structural factors affecting the optical properties of blown polyethylene films. Two types of blown polyethylene films of similar degrees of crystallinity were made from (1) single‐site‐catalyst high‐density polyethylene (HDPE; STAR α) and (2) Ziegler–Natta‐catalyst HDPE (ZN) resins. The STAR α film exhibited high clarity and gloss, whereas the ZN film was turbid. Small‐angle X‐ray scattering (SAXS), small‐angle light scattering (SALS), and optical microscopy gave quantitative and qualitative information regarding structure and orientation in the films. A new approach is described for determining the three‐dimensional lamellar normal orientation from SAXS. Both the clear STAR α and turbid ZN films had similar lamellar crystalline structures and long periods but displayed different degrees of orientation. It is demonstrated that optical haze is related to surface features that seem to be linked to the bulk morphology. The relationship between haze and structural orientation is described. The lamellar orientation is linked to rodlike structures seen in optical microscopy and SALS through a stacked lamellar or cylindrite morphology on a nanometer scale and through a fiberlike morphology on a micrometer scale. The micrometer‐scale, rodlike structures seem directly related to surface roughness in a comparison of index‐matched immersion and surface micrographs. The higher haze and lower gloss of the ZN film was caused by extensive surface roughness not observed in the STAR α film. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2923–2936, 2001     

Ring‐banded spherulites in poly(pentamethylene terephthalate): A model of waving and spiraling lamellae

A new aryl polyester, poly(pentamethylene terephthalate) (PPT) with five methylene groups in the repeat unit, was synthesized. Its multiple‐melting behavior and crystal structure were analyzed with differential scanning calorimetry and wide‐angle X‐ray diffraction. In addition, the spherulitic/lamellar morphology of melt‐crystallized PPT was investigated. Typical Maltese‐cross spherulites (with no rings) were seen in melt‐crystallized PPT at low temperatures (70–90 °C), but ring patterns were seen in PPT crystallized only at temperatures ranging from 100 to 115 °C, whereas rings disappeared with crystallization above 120 °C. The mechanisms of the rings in PPT were explained with several coordinated directional changes (wavy changes, twisting changes, and combinations) in the lamellae during growth. Scanning electron microscopy, in combination with atomic force microscopy, further proved that the ringed spherulites originated from the aggregation of sufficient numbers of edge‐on lamellar crystals; the radial‐growth edge‐on/flat‐on lamellae could be twisted and/or waved to form realistic band patterns. A postulated model properly described a possible origin of the ring bands through combined mechanisms of waving (zigzagging) and twisting (spiraling) of the lamellae during crystallization. Superimposed twisting and/or wavy models during crystallization were examined as examples. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4421–4432, 2004     

Differences in self‐assembly features of thermoresponsive anionic triblock copolymers synthesized via one‐pot or two‐pot by atom transfer radical polymerization

The self‐assembly process in aqueous solutions of the methoxyl‐poly(ethylene glycol)‐block‐poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic sodium)‐block‐poly(N‐isopropyl acrylamide) (PNIPAAM) triblock copolymer, synthesized via two different atomic transfer radical polymerization methods, namely “one‐pot” (P3‐sample) and “two‐pot” (P2‐sample), was studied by various experimental techniques. The “one‐pot” procedure leads to a copolymer (P3) where the PNIPAAM block is contaminated with a minor quantity of 2‐acrylamido‐2‐methyl‐1‐propane sulfonate (AMPS) residuals and this sample does not form micelles over the considered temperature region, but unimers and temperature‐induced aggregates coexist in the presence of a small amount of salt. The P2 polymer forms micelles and intermicellar structures, but the former moieties disappear at high temperatures, whereas the latter species contract with increasing temperature. Small‐angle neutron scattering results revealed correlation peaks, both for P3 and P2, and no micelle formation for P3, but a pronounced upturn of the scattered intensity at low wavevector values at elevated temperatures for the P2 copolymer. The findings from this study clearly show that the spurious AMPS residuals have a drastic influence on the self‐assembly and micelle formation of the triblock copolymer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 524–534     

Traditional uses,phytochemistry, pharmacology and other potential applications of Vitellaria paradoxa Gaertn. (Sapotaceae): A review

Vitellaria paradoxa Gaertn. is a multipurpose medicinal plant of the family Sapotaceae, and it has been widely used usually in the clinical traditional medicine as remedy for a wide range of diseases for several decades. In addition, the plant has also found applications in confectionery, cosmetics and soaps, and pharmaceuticals both locally and internationally. V. paradoxa, which has been identified with >150 phytoconstituents, is rich in oleanane-type triterpene acids and glycosides, such as paradoxosides A-E, tieghemelin A, parkiosides A-C, bassic acid, as well as flavonoids such as quercetin and catechin-type compounds. The extracts and the active constituents of V. paradoxa have been investigated for various pharmacological activities, including but not limited to anticancer, melanogenesis-inhibitory, antibacterial, anti-diabetic, antioxidant, anti-inflammatory, anti-diarrhoeal, and antifungal activities. Additionally, V. paradoxa has also been utilized in nanoparticles (NPs) synthesis. These NPs among other things have shown significant antinociceptive and antiedematogenic activities as well as environmental friendly adsorptive properties for the removal of pollutants from pharmaceutical effluents. Overall, this review comprehensively examines the traditional uses, phytochemistry, pharmacology, toxicology, clinical studies, and nanoparticles synthesized from V. paradoxa and their applications.     

Dynamics of liposomes in the fluid phase

We review the currently available material on the morphology and dynamics of phospholipids assembled into liposomes. Key information obtained from neutron scattering, nuclear magnetic resonance (NMR), and other techniques plays a crucial role in understanding the vital role of lipids in sustaining life in living organisms. We concentrate on the dynamics in the biologically important fluid phase in the time range from picoseconds to seconds, which includes a discussion of the center of mass diffusion of liposomes, membrane fluctuations; and lateral, rotational, and flip-flop motions of the lipids. We emphasize on the sensitivity of the dynamics on interactions with a variety of biologically relevant molecules such as cholesterol. By a comparison of data from literature, we witness a good agreement of the results from different techniques and studies.     

Recent advancement and development of chitin and chitosan-based nanocomposite for drug delivery: Critical approach to clinical research

This review depicts the exposure of chitin and chitosan base multifunctional nanomaterial composites for promising applications in field of biomedical science structure, synthesis as well as potential application from a colossal angle. We elaborated critically each of the chitin and chitosan base nanomaterial with its potential application toward biomedical science. For different biomedical applications it use in form of hydrogels, microsphere, nanoparticles, aerogels, microsphere and in form of scaffold. Due to this it had been blended with different polymer such as starch, cellulose, alginate, lipid, hyaluronic acid, polyvinyl alcohol and caboxymethyl cellulose. In this review article, a comprehensive overview of combination of chitin and chitosan base nanomaterial with natural as well as synthetic polymers and their biomedical applications in biomedical field involving drug delivery system all the technical scientific issues have been addressed; highlighting the recent advancements.