Self-assembled tri-block terpolymer blend membranes reinforced with poly(methyl methacrylate)-coated gold nanoparticles obtained through phase inversion technique

The blend membranes of polystyrene-block-polyisoprene-block-polystyrene and polyethylene-block-poly(ethylene glycol)-block-polycaprolactone were designed using the phase inversion technique. The poly(methyl methacrylate)-coated gold nanoparticles are around 40–50 nm in size. The honeycomb-shaped nanopores were uniformly dispersed in polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles blend membranes. There was a 16% increase in tensile strength and a 33% increase in tensile modulus of polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles 1 relative to the neat membrane. With 1 wt% nanoparticles, the membrane showed a higher water flux of 59.2 mL cm^?2 min^?1 and a salt rejection ratio of 25.4%, while the polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone membrane without poly(methyl methacrylate)-coated gold nanoparticles had lower flux (43.8 mL cm^?2 min^?1) and salt rejection (18.5%).     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Block copolymers with liquid crystalline segments

This paper describes the synthesis and characterization of polystyrene-block-poly(2,2'-dimethyl-4,4'-biphenylene phenylterephthalate)-block-polystyrene and of poly(ethylene glycol)-black-poly(2,2'-dimethyl-4,4'-biphenylene phenylterephthalate)-block-poly (ethylene glycol) block copolymers. The ABA-triblock copolymers were synthesized by condensation reaction of telechelic poly(2,2'-dimethyl-4,4'-biphenylene phenylterephthalate) with ω-hydroxy polystyrene and ω-hydroxy poly(ethylene glycol) methyl ether of different molecular weights prepared by anionic polymerization. Some aspects of the liquid crystalline behavior and the phase transitions with respect to the block copolymer composition will be discussed.     

Temperature,concentration and salt effect on F68 tri-block copolymer in aqueous solution: Rheological study

The rheology of the aqueous solution of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO?PPO?PEO) triblock copolymer, Pluronic F68 in the presence of KF was studied in the temperature range from 15 to 60°C. The variation of the shear stress according to the shear rate shows that independently from the temperature and concentration, the F68 solutions exhibit a Newtonian behavior. The results show that the Critical Micelle Temperature of Pluronic F68 in a KF aqueous solution decreases with the increase in the salt concentration.     

Influence of Carbon Black on Conductivity and Structure of Polyethylene Oxide Based Polymer Electrolyte Film

The potential applications of carbon black are expected to grow as science and technology improve offering up new possibilities for innovation throughout disciplines included in the field of energy storage. The present work shows the influence of carbon black to improve the ionic conductivity of the polymer electrolyte. The synthesis of polyethylene oxide: ammonium iodide based polymer electrolyte incorporated with carbon black varying from 0.01 to 0.06 wt% with respect to PEO: NH4I system by solution casting method. Different characterizations like polarized optical microscopy (POM), impedance spectroscopy, and ionic transference number (t_ion) are studied in detail. The maximum ionic conductivity is achieved at 0.05 wt% carbon black shows 1.20 × 10⁻⁵ S cm⁻¹ at ambient temperature. In accordance with POM data, the amorphous region has increased whereas the crystalline region has shrunk which further indicated the increase in ionic conductivity . The value of (t_ion) is calculated to be 0.97 which shows the system is ionic in nature. PEO based polymer electrolyte doped carbon black can be used for the fabrication of energy storage devices.     

Synthesis and characterization of thermoresponsive amphiphilic block copolymers incorporating a poly(ethylene oxide‐stat‐propylene oxide) block

Amphiphilic BuO‐(PEO‐stat‐PPO)‐block‐PLA‐OH diblock and MeO‐PEO‐block‐(PEO‐stat‐PPO)‐block‐PLA‐OH triblock copolymers incorporating thermoresponsive poly(ethylene oxide‐stat‐propylene oxide) (PEO‐stat‐PPO) blocks were prepared by ring‐opening polymerization of lactide (LA) initiated by macroinitiators formed from treating BuO‐(PEO‐stat‐PPO)‐OH and MeO‐PEO‐block‐(PEO‐stat‐PPO)‐OH with AlEt₃. MeO‐PEO‐block‐(PEO‐stat‐PPO)‐OH was prepared by coupling MeO‐PEO‐OH and HO‐(PEO‐stat‐PPO)‐OH, followed by chromatographic purification. The cloud points of 0.2% aqueous solutions are between 36 and 46 °C for the diblock copolymers that contain a 50 wt % EO thermoresponsive block and 78 °C for the triblock copolymer that contains a 75 wt % EO thermoresponsive block. Variable temperature ¹H NMR spectra recorded on D₂O solutions of the diblock copolymers display no PLA resonances below the cloud point and fairly sharp PLA resonances above the cloud point, suggesting that desolvation of the thermoresponsive block increases the miscibility of the two blocks. Preliminary characterization of the micelles formed in aqueous solutions of BuO‐(PEO‐stat‐PPO)‐block‐PLA‐OH conducted using laser scanning confocal microscopy and pulsed gradient spin echo NMR point to significant changes in the size of the micellar aggregates as a function of temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5156–5167, 2005     

Novel Supramolecular Hydrogels as Artificial Vitreous Substitutes

The possibility of employing self-healing gels as potential artificial vitreous substitutes is being explored. Advancement of traditional synthetic hydrogels as vitreous substitutes is hindered by their fragmentation upon injection into the vitreous cavity leading ultimately to inflammation. Preliminary work involved developing first generation self-healing gels, using amphiphilic tri-block copolymers of poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) (PPG-PEG-PPG) as the building block. Eight linear self-healing gels are synthesized by tethering an ureidopyrimidinone system to synthetically modified PPG-PEG-PPG via the formation of a bis-urea as a linker. The reversible nature of the hydrogen bonds permits alteration of their physical properties by changing the environment, yet retaining desirable characteristics. Despite low solubility in water, these polymers demonstrated associating behaviour under the investigated conditions, which is encouraging. Future generations of self-healing gels should involve the selection of a more hydrophilic core and/or star-like polymers to facilitate gel formation and strengthen the network.     

Novel amphiphilic linear polymer/dendrimer block copolymer: Synthesis of poly(2-methyl-2-oxazoline)-block-poly(amido amine) dendrimer

Novel linear polymer/dendrimer block copolymers, poly(2-methyl-2-oxazoline)-block-poly(amido amine) dendrimers (water-soluble full-generation type 4 (G = 4.0 and 5.0) and amphiphilic half-generation type 5 (G = 3.5, 4.5, and 5.5)), were synthesized by divergent-growth dendrimer construction with ω-ethylenediamine-terminated poly(2-methyl-2-oxazoline), which was prepared by living ring-opening polymerization of 2-methyl-2-oxazoline. Assembly of the amphiphilic dendrimer-based block copolymer (G = 5.5) was investigated by surface tension measurements (critical micelle concentration, 0.49 wt.-%) and by small-angle neutron scattering analysis (spherical particles; assembled number, ca. 10³).     

Novel synthesis of biodegradable poly(lactide-co-ethylene glycol) block copolymers

Biodegradable and amphiphilic diblock copolymers [polylactide-block-poly(ethylene glycol)] and triblock copolymers [polylactide-block-poly(ethylene glycol)-block-polylactide] were synthesized by the anionic ring-opening polymerization of lactides in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. The polymerization in toluene at room temperature was very fast, yielding copolymers of controlled molecular weights and tailored molecular architectures. The chemical structure of the copolymers was investigated with ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and differential scanning calorimetry investigations. The monomodal profile of the molecular weight distribution by gel permeation chromatography provided further evidence of block copolymer formation as well as the absence of cyclic species. Additional confirmation of the block copolymers was obtained by the substitution of 2-butanol for poly(ethylene glycol); butyl groups were clearly identified by ¹H NMR as polymer chain end groups. The effects of the copolymer composition and lactide stereochemistry on the copolymer properties were examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2235–2245, 2007     

Aggregation behaviour of a novel series of polyamidoamine-based dendrimers in aqueous solution

Dendrimers composed of G1 polyamidoamine branched with poly(propylene oxide) (PPO)-block-poly(ethylene oxide) (PEO) were synthesised for the first time. Surface tension results showed an increase in the critical aggregation concentration (cac) with PPO-b-PEO chain lengthening. The thermodynamic parameters associated with aggregate formation were determined by isothermal titration microcalorimetry, indicating that both the cac and the Gibbs free energy for aggregation (ΔG°) ascended as the amphiphilic chain length increased. The gain of entropy (ΔS°) was the main contribution to aggregation due to TΔS° being larger than the enthalpy (ΔH°). Aggregate morphology and size distribution were studied through transmission electron microscope and dynamic light scattering measurements. Furthermore, the relationship between PEO chain length and aggregation behaviour was discussed.     

Model block–graft copolymer via anionic living polymerization: Preparation and characterization of polystyrene-block-[poly(p-hydroxystyrene)-graft-poly(ethylene oxide)]-block-polystyrene

A model graft copolymer in which position of graft points was set to the center of a backbone molecule was prepared via anionic living polymerization. Polystyrene-block-poly(p-tert-butoxystyrene)-block-polystyrene (PSt-b-PBSt-b-PSt) was prepared by three-stage sequential addition. The tert-butyl group was removed from PBSt by hydrogen bromide to yield PSt-b-PHSt-b-PSt, having a poly(p-hydroxystyrene) (PHSt) block. The hydroxyl group of PHSt was reacted with dimeric potassium dianions of 1, 1-diphenylethylene (DPE-K) or cumyl potassium (cumyl K) to yield the corresponding macromolecular initiators of PSt-b-PHSt⁻K⁺-b-PSt containing the potassium alkoxide ion of PHSt. The newly formed alkoxide groups and remaining initiators of DPE-K or cumyl K are capable of initiating the additionally introduced ethylene oxide (EO). Thus, two block–graft copolymers of polystyrene-block-[poly(p-hydroxystyrene)-graft-poly(ethylene oxide)]-block-polystyrene (PSt-b-(PHSt-g-PEO)-b-PSt) were prepared by a “grafting from” process (backbone initiation). A PSt-b-PHSt-b-PSt backbone (M_n = 1.7₅ × 10⁵ by osmometry and M_w/M_n = 1.0₈ by GPC), and two PSt-b-(PHSt-g-PEO)-b-PSt block–graft copolymers (M_n = 2.4₅ × 10⁵ by osmometry and M_w/M_n < 1.1₀ by GPC) had narrow molecular weight distributions. A relationship between nonquantitative metallation and spacing of the graft points on a backbone molecule was discussed in detail. Two benzene-cast films formed clear microphase-separated structures of lamellar structure. The dependence of composition on the morphology of the block–graft copolymers was found to differ from that of common block copolymers. A degree of crystallinity of PEO segment and lamellar thickness of PEO phase serving as graft molecule were also found to differ from those of homo PEO and/or PEO segment in common block copolymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3021–3034, 1998     

Properties of a poly(ethylene glycol)-<Emphasis Type="Italic">block</Emphasis>-poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate)-<Emphasis Type="Italic">graft</Emphasis>-poly(ethylene glycol) copolymer membrane

Poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PEG-block-PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of PBLG-block-PEG copolymer with a PEG chain. Surface morphology of the PEG-block-PBLG-graft-PEG copolymer membrane was characterized by atomic force microscopy (AFM). Mechanical and chemical properties of the PEG-block-PBLG-graft-PEG copolymer membrane were investigated by tensile testing and contact angle testing. The effects of grafting ratio on the properties of PEG-block-PBLG-graft-PEG copolymer membrane were primarilly studied.     

An In Situ Carbonization–Replication Method to Synthesize Mesostructured WO3/C Composite as Nonprecious‐Metal Anode Catalyst in PEMFC

A meostructured WO₃/C composite with crystalline framework and high electric conductivity has been synthesized by a new in situ carbonization–replication route using the block copolymer (poly(ethylene glycol)‐block‐poly(propylene glycol)‐block‐poly(ethylene glycol)) present in situ in the pore channels of mesoporous silica template as carbon source. X‐ray diffraction, X‐ray photoelectron spectroscopy, transmission electron microscopy, thermogravimetry differential thermal analysis, and N₂ adsorption techniques were adopted for the structural characterization. Cyclic voltammetry, chronoamperometry, and single‐cell test for hydrogen electrochemical oxidation were adopted to characterize the electrochemical activities of the mesoporous WO₃/C composite. The carbon content and consequent electric conductivity of these high‐surface‐area (108–130 m² g^?1) mesostructured WO₃/C composite materials can be tuned by variation of the duration of heat treatment, and the composites exhibited high and stable electrochemical catalytic activity. The single‐cell test results indicated that the mesostructured WO₃/C composites showed clear electrochemical catalytic activity toward hydrogen oxidation at 25 °C, which makes them potential non‐precious‐metal anode catalysts in proton exchange membrane fuel cell.     

Study on Self-assembly of Poly(ethylene glycol)- block-poly(γ-benzyl L -glutamate)-graft-poly(ethylene glycol) Copolymer and Poly(γ-benzyl L -glutamate)- block-poly(ethylene glycol) Copolymer in Ethanol

Poly(ethylene glycol)-block-poly(γ-benzyl L-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesized by the ester exchange reaction of poly(γ-benzyl L-glutamate)-block-poly(ethylene glycol) (PBLG-block-PEG) copolymer with PEG chain, and PBLG-block-PEG copolymer was prepared by a standard N-carboxyl-γ-benzyl-L-glutamate anhydride (NCA) method. Nuclear magnetic resonance (NMR) spectroscopy was used to confirm the components of PBLG-block-PEG and PEG-b-PBLG-g-PEG. The self-association behaviors of PBLG-block-PEG and PEG-b-PBLG-g-PEG in ethanol were investigated by transmission electron microscopy (TEM), dynamic laser scattering (DLS), and viscometry. The experimental results revealed that the different molecular structures could exert marked effects on the self-assembly behaviors of PBLG-block-PEG and PEG-b-PBLG-g-PEG in ethanol. PBLG-block-PEG and PEG-b-PBLG-g-PEG could self-assemble to form polymeric micelles with a core-shell structure in the shapes of plump spherical and regular rice-like, respectively. Effects of the introduction of PBLG homopolymer on the average particle diameter of the micelles of PBLG-block-PEG and PEG-b-PBLG-g-PEG and influence of testing temperature on the critical micelle concentration of different copolymers were studied.     

Flexible Li-CO2 Batteries with Liquid-Free Electrolyte

Developing flexible Li-CO₂ batteries is a promising approach to reuse CO₂ and simultaneously supply energy to wearable electronics. However, all reported Li-CO₂ batteries use liquid electrolyte and lack robust electrolyte/electrodes structure, not providing the safety and flexibility required. Herein we demonstrate flexible liquid-free Li-CO₂ batteries based on poly(methacrylate)/poly(ethylene glycol)-LiClO₄-3 wt %SiO₂ composite polymer electrolyte (CPE) and multiwall carbon nanotubes (CNTs) cathodes. The CPE (7.14×10⁻² mS cm⁻¹) incorporates with porous CNTs cathodes, displaying stable structure and small interface resistance. The batteries run for 100 cycles with controlled capacity of 1000 mAh g⁻¹. Moreover, pouch-type flexible batteries exhibit large reversible capacity of 993.3 mAh, high energy density of 521 Wh kg⁻¹, and long operation time of 220 h at different degrees of bending (0–360°) at 55 °C.     

Synthesis of Amphiphilic ABCBA-Type Pentablock Copolymer from Consecutive ATRPs and Self-Assembly in Aqueous Solution

Summary: A novel amphiphilic ABCBA-type pentablock copolymer with properties that are sensitive to temperature and pH, poly(2-dimethylaminoethyl methacrylate)-block-poly(2,2,2-trifluoroethyl methacrylate)-block-poly(ε-caprolactone)-block-poly(2,2,2- trifluoroethyl methacrylate)-block-poly(2-dimethylaminoethyl methacrylate) (PDMAEMA- b-PTFEMA-b-PCL-b-PTFEMA-b-PDMAEMA), was synthesized via consecutive atom transfer radical polymerizations (ATRPs). The copolymers obtained were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy, respectively. The aggregation behaviors of the pentablock copolymers in aqueous solution with different pH (pH = 4.0, 7.0 and 8.5) were studied. Transmission electron microscopic images revealed that spherical micelles from self-assembly of the pentablock copolymer were prevalent in all cases. The mean diameters of these micelles increased from 34, 46, to 119 nm when the pH of the aqueous solution decreased from 8.5, 7.0, to 4.0, respectively.     

Fluorospectroscopy monitoring aggregation of block ionomers in aqueous media

A new type of aggregation behavior of block ionomers, i.e. functionalized polystyrene-block-poly[ethylene-co-(1-butene)]-block-polystyrene (SEBS) with respective contents of 3.2 mol-% and 8.3 mol-% sodium carboxylate groups in polystyrene blocks has been studied using steady-state fluorescence techniques. It is found that the block ionomers could form a stable dispersion in water although both the slightly ionized polystyrene block and the ethylene/1-butene block are hydrophobic. The intensity ratio of the first to third vibronic band (I₁/I₃) of pyrene varies from 1.8, characteristic of the aqueous medium, to about 0.8, characteristic of hydrophobic microenvironment when the ionomer concentration in water is increased from 8 × 10⁻⁴ g/L to 2 × 10⁻¹ g/L. Meanwhile, the emission intensity ratio of excimer to monomer (I_e/I_m) of pyrene increases with increasing polymer concentration first, then passes through a maximum and eventually falls off to zero. Both of the methods show the same critical aggregation concentration (8 × 10⁻⁴ g/L). Besides the non-radiative energy transfer efficiency between naphthalene and anthracene shows a considerable increase when the concentration reaches 0.01 g/L. All of these three approaches lead to the fact that the block ionomers could form hydrophobic aggregates in water stabilized by the rare ionic groups.     

Hydrogen bond mediated self-assembly of two diblock copolymers

Two chemically dissimilar diblock copolymers, polybutadiene-b-poly(acrylic acid), PBd-b-PAA (M_w = 5.8–4 kg mol⁻¹) and poly(styrene)-b-poly(ethylene oxide), PS-b-PEO (M_w = 9–5 kg mol⁻¹) were blended in an effort to achieve morphologies typical of triblock copolymers. Blend compatibility was achieved by the hydrogen bond driven association of the PAA block of one diblock with the PEO block of the other. Small angle X-ray scattering was used to determine the morphologies of the compositions, which were further investigated using transmission electron microscopy and selective staining techniques. The crystallinity of the PEO block was determined by differential scanning calorimetry. The hydrogen bond interactions between PEO and PAA yielded a complex triblock lamellar morphology of the form PS-b-(PEO/PAA)-b-PBd-b-(PEO/PAA). This morphology was stable when crystallization of PEO was suppressed by sufficient interaction with PAA.     

Preparing a functionalized thermoplastic elastomer—bromination and synthesis of poly(p-methylstyrene-co-styrene)-block-poly(ethylene-co-butene)-block-poly(p-methylstyrene-co-styrene)

A poly(p-methylstyrene-co-styrene)-block-poly(ethylene-co-butene)-block-poly(p-methylstyrene-co-styrene) thermoplastic elastomer was prepared via anionic synthesis of poly(p-methylstyrene-co-styrene)-block-polybutadiene-block-poly(p-methylstyrene-co-styrene) followed by a hydrogenation of the polybutadiene midblock. The sequential method used for the synthesis has resulted in a nearly monodispersed polymer with a polydispersity of 1.03. Bromination of such synthesized copolymer was next, conducted using two different methods. In the presence of a FeCl₃ catalyst in CCl₄ solvent, bromination occurred through forming a carbocationic complex to undergo an electrophilic substitution reaction on the aromatic rings of the end blocks. Nevertheless, the bromination occurred exclusively on the p-methyl groups of the end blocks when conducted in cyclohexane using photoinitiated free radicals. The microstructure of the brominated molecules were analyzed using ¹H-NMR and ¹³C-NMR, and bromination efficiencies of 48 and 44% have been attained from the two methods, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4108–4116, 1999     

Effects of denaturing acid on the self-association behaviour of poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) copolymer in ethanol

Poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesised by the ester exchange reaction of PEG-block-PBLG copolymer with mPEG. The self-association behaviour of PEG-b-PBLG-g-PEG in mixtures of ethanol, chloroform, and trifluoroacetic acid as denaturing acid was investigated by transmission electron microscopy, nuclear magnetic resonance spectroscopy, FT-IR spectroscopy, dynamic light scattering, and viscometry. It was revealed that the increase in denaturing acid content in the mixed system not only promoted the critical micelle concentration but also changed the morphology of the polymeric micelles from elliptical to spherical.