Orientation Dependent FT Raman Microspectroscopy on Hemp Fibers

Summary: FT Raman microspectroscopy was used for polarization experiments on strained hemp fibre cells. The cellulosic plant fibers were macerated with alkaline and enzymatic solutions. Those cleaned and refined single fiber cells were subjected to micro tensile tests as well as to polarization measurements under the FT Raman microscope. Mechanical parameters of the fiber cells (e.g. E-modulus) were determined and changes in orientation of the  (C O C) structure units of the cellulose were considered with respect to fiber stress and molecular fiber structures. Intensity ratios R₁ and R₂ calculated on the polarized micro FT Raman spectra of the strained fibers describe the order parameter 〈P₂〉 and 〈P₄〉 allowing the quantitative determination of the orientation of the structure units  (C O C) of fiber cellulose with respect to the fiber cell axis.     

NIR FT Raman Spectroscopy–a Rapid Analytical Tool for Detecting the Transformation of Cellulose Polymorphs

This is a report of the combined use of NIR FT Raman spectroscopy and X-ray diffraction measurements (WAXS) to investigate the polymorphic transformation of cellulose I into cellulose II. For this reason samples of cellulose I were swelled in different concentrations of NaOH and dissolved in different molten inorganic salts hydrates (LiCl·2ZnCl₂·6H₂O, LiClO₄·3H₂O, LiSCN·2,5H₂O and ZnCl₂·4H₂O). NIR FT Raman spectra of the alkali treated samples were recorded. They characterize the pure modifications cellulose I and II as well as mixtures of the two polymorphic phases. The results of the Raman measurements were confirmed by X-ray scattering. The paper demonstrates that FT Raman vibrational spectroscopy is a powerful, rapid analytical method which may be used to follow the polymorphic transformation of cellulose I into cellulose II.     

FT Raman spectroscopic investigation of cellulose acetate

This study reports on a new method characterizing cellulose acetates and determining the contents of acetyl groups within cellulose acetates based on FT Raman spectroscopy. Cellulose acetates exhibiting diverse degrees of substitution ascribed to acetyl groups (DS_Ac) were obtained after the deacetylation of highly acetylated cellulose, i.e. cellulose diacetate and cellulose triacetate (CTA), with aqueous sodium hydroxide solution or 1,6-hexamethylenediamine (HMDA). After plotting the Raman intensity ratios between the bands at 1,740 and 1,380 cm⁻¹ against the DS_Ac, a calibration curve with high correlation coefficient of more than 0.99 was obtained. During the deacetylation of highly acetylated cellulose, a by-product—sodium acetate (NaOAc)—forms as the most possible salt among others. In order to determine the content of NaOAc, the mixtures of cellulose acetates and NaOAc were measured with FT Raman spectroscopy. Based on the relationship between the Raman intensity ratios as I₉₂₉/I₁₃₈₀ and the contents of NaOAc in the mixtures, a calibration curve exhibiting high correlation coefficient of more than 0.99 was generated.     

New Method for Determining the Degree of Cellulose I Crystallinity by Means of FT Raman Spectroscopy

A Raman crystallinity index – Xc_Raman – characterizing the degree of crystallinity of partially crystalline cellulose I samples was created, utilizing the crystallinity dependence of CH₂ bending modes. For calibration, physical mixtures containing different mass fractions of crystalline cellulose I and its amorphous form were prepared. Crystallinities from 0 to 60% were generated. Relative intensity ratios of the Raman lines I and I characterizing crystalline and amorphous parts of cellulose I correlated linearly with the mass fraction of crystalline cellulose I of the mixtures. Xc_Raman values of microcrystalline celluloses of different origins and varying degree of crystallinity correlated reasonably with results obtained from NMR spectroscopy (Xc_NMR values).     

Characterization of alkali treated flax fibres by means of FT Raman spectroscopy and environmental scanning electron microscopy

Flax fibres grown under well managed conditions were submitted to NaOH chemical treatments, so called Mercerization. The extent of the polymorphic transformation of cellulose I into cellulose II taking place within the crystalline domains of the fibre cellulose was dependent on the alkali concentration. FT Raman spectroscopy turned out to represent an ideal tool for detecting the polymorphic transformation of the cellulosic fine structure of the flax fibres in vivo. In addition to the differences of the FT Raman spectra in the frequency range below 1500 cm(-1), second derivatives of the spectra in the range of the CH stretching vibrations could also be used to distinguish the two polymorphic modifications. The intensity ratio R of the stretching modes v(s)COC and v(as)COC represents a spectral parameter characterising the molecular structure of the flax fibres. As a supplementary tool, Environmental scanning electron microscopy (ESEM) was used to visualize the microstructural fibre properties dependent on the alkali concentrations during the Mercerization.     

Authentication of Camellia oleifera Abel Oil by Near Infrared Fourier Transform Raman Spectroscopy

Adulteration of Camellia oleifera Abel. oil with other cheaper oil has been a long‐term problem in Taiwan because the price of Camellia oleifera Abel. oil is much higher than that of other edible oils due to its distinguished physiological properties. To develop an efficient method for determining the authenticity of Camellia oleifera Abel. oil is of great importance. In previous study (Appl. Spectrosc. 2003 , 57, 413), we showed that the Raman intensity ratio of ν₁₆₅₆/ν₁₄₃₉ was capable of reflecting precisely the degree of unsaturation in edible oils. Accordingly, we further present this Raman method to determine the authenticity of Camellia oleifera Abel. oil. It showed that the intensity ratio (I_{ν1656/ν1439}) changed concomitantly with the magnitude of double bonds in the binary mixtures of Camellia oleifera Abel. oil blended with other edible oil. A linear relationship with a high correlation coefficient (R² = 0.9938) between the Raman intensity ratio of ν₁₆₅₆/ν₁₄₃₉ and the percentage of Camellia oleifera Abel. oil was obtained, which could be used to determine the authenticity of Camellia oleifera Abel. oils collected from various markets. It shows that FT‐Raman spectroscopy provides a direct, simple, rapid, and non‐invasive method to probe the authenticity of Camellia oleifera Abel. oil.     

Fabrication of thermoresponsive micelles by functionalizing hydroxypropyl cellulose via azide-alkyne click reaction

In this work, we functionalized hydroxypropyl cellulose (HPC) by attaching tetraphenylethylene (TPE) via copper-catalyzed azide-alkyne cycloaddition (CuAAC). The obtained HPC-TPE samples displayed water-solubility, biocompatibility, fluorescence and thermoresponsive properties. The degree of substitution (DS_TPE) of HPC-TPE1 ~ 4 was determined to be 0.002, 0.006, 0.025, and 0.053, respectively. HPC-TPE could self-assemble into micelles in water with the hydrodynamic radius (R_h) ranging from 164 to 190 nm. Under different DS_TPE, HPC-TPE samples showed different lower critical solution temperature (LCST) behaviors in light transmittance, R_h and fluorescence. The critical transition temperatures in light transmittance for HPC-TPE1 ~ 4 solutions were 55–49 °C during the heating process, and were 44–40 °C during the cooling process, respectively. Moreover, HPC-TPE demonstrated a rapid and sensitive response to Fe³⁺ with ignoring interferences in the presence of other common metal ions, and could also be used to image 4T1 cells. Therefore, this work offered a general approach for the synthesis of functionalized polymers with promising applications in sensing and bioimaging.     

Novel cellulose derivatives. III. Thermal analysis of mixed esters with butyric and hexanoic acid

Cellulose derivatives with low degrees of substitution (i.e., DS < 1.5) often fail to reveal glass transition temperatures (T_g) by virtue of their tenacious adherence to moisture, thus preventing systematic analysis of substituent effects (size and DS) on T_g and T_m transitions. On the other hand, cellulose triesters have T_ms that decline with acyl substituent size except when the substituent size becomes very large (i.e., > C₆), and they have T_gs within 5–20°C of their T_ms. This proximity is unusual for a semicrystalline material, and it interferes with the crystallization process that occurs between T_m and T_g. Triesters of cellulose with mixed acyl substituents (one smaller and one larger) allow not only unambiguous observation of T_gs and T_ms but also an adjustable Δ(T_m ? T_g) window that depends upon the size and the DS of the larger substituent. The materials studied including cellulose acetate butyrate triesters (DS_bu 0.8–2.6), cellulose acetate hexanoate triesters (DS_hex 0–3.0), and cellulose acetate (DS_ac 2.44), revealed that only the mixed esters, in which the bulkier acyl group is in the range of DS 0.3–1.0, had a Δ(T_m ? T_g) value in excess of 40°C. Although the T_m of cellulose acetate hexanoate declined by ca. 150°C per unit of DS_hex as DS_hex rose from 0 to 1, this was only ca. 25°C between DS_hex of 1 and 3. Frequently observed dual-melt endotherms were attributed to two separate crystal morphologies. ©1995 John Wiley & Sons, Inc.     

Microwave‐assisted derivatization of cellulose in an ionic liquid: An efficient,expedient synthesis of simple and mixed carboxylic esters

Microwave (MW)‐assisted cellulose dissolution in ionic liquids (ILs) has routinely led either to incomplete biopolymer solubilization, or its degradation. We show that these problems can be avoided by use of low‐energy MW heating, coupled with efficient stirring. Dissolution of microcrystalline cellulose in the IL 1‐allyl‐3‐methylimidazolium chloride has been achieved without changing its degree of polymerization; regenerated cellulose showed pronounced changes in its index of crystallinity, surface area, and morphology. MW‐assisted functionalization of MCC by ethanoic, propanoic, butanoic, pentanoic, and hexanoic anhydrides has been studied. Compared with conventional heating, MW irradiation has resulted in considerable decrease in dissolution and reaction times. The value of the degree of substitution (DS) was found to be DS_ethanoate > DS_propanoate > DS_butanoate. The values of DS_pentanoate and DS_hexanoate were found to be slightly higher than DS_ethanoate. This surprising dependence on the chain length of the acylating agent has been reported before, but not rationalized. On the basis of the rate constants and activation parameters of the hydrolysis of ethanoic, butanoic, and hexanoic anhydrides in aqueous acetonitrile (a model acyl transfer reaction), we suggest that this result may be attributed to the balance between two opposing effects, namely, steric crowding and (cooperative) hydrophobic interactions between the anhydride and the cellulosic surface, whose lipophilicity has increased, due to its partial acylation. Four ethanoate‐based mixed esters were synthesized by the reaction with a mixture of the two anhydrides; the ethanoate moiety predominated in all products. The DS is reproducible and the IL is easily recycled. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 48: 134–143, 2010     

Studies on Non-natural Deoxyammonium Cellulose

Summary: Ammonium group containing cellulose derivatives are prepared from homogeneously synthesized cellulose p-toluenesulfonic acid esters (tosyl cellulose) by conversion with sodium azide and subsequent reduction of the azido moiety applying NaBH₄/CoBr₂/2,2′-bipyridine as reagent. Regarding the tosylation, cellulose samples of different degree of polymerization and hemicellulose content possess a different reactivity. The deoxyamino cellulose is water soluble in the protonated state. Elemental analysis, FTIR- and NMR spectroscopy were carried out to analyze the degree of substitution and functionalization pattern. It was also studied to synthesize deoxyazido celluloses without isolation of the tosyl cellulose. However, a predominant formation of deoxychloro moieties occurs.     

Confocal Raman Spectroscopy – Applications on Wood,Pulp, and Cellulose Fibres

The manifold possibilities using dispersive Raman spectroscopy along the production chain from wood to cellulose fibre are presented here: The distribution of the lignin, cellulose, and added resins in the wood cell; additives inside regenerated cellulose fibres; their accessibility and reactivity. On-line measurements during the phase transition of magnesium sulphite -hexahydrate into -trihydrate are performed in a stirring vessel.     

Solid-state NMR studies of methyl celluloses. Part 2: Determination of degree of substitution and O-6 vs. O-2/O-3 substituent distribution in commercial methyl cellulose samples

Solid state NMR spectroscopy was applied to determine the overall degree of substitution (DS) and the degrees of substitution at C-6 (DS_C-6) and C-2/3 (DS_C-2/3). Four commercial methyl cellulose samples were used, having a DS between 0.51 and 1.96 as determined by wet-chemical analysis. The strategy and optimization of the NMR data acquisition as well as the data evaluation procedures are explained in detail. Optimization of the approach mainly comprised (a) maximizing the signal by choice of NMR probe, MAS spinning frequency and B ₀ field, (b) minimizing the measurement time by a Torchia-type experiment and (c) suppressing probe background by rotor-synchronized echo detection. Data evaluation used simply the integration of three different spectral ranges in the ¹³C NMR spectrum. The results of the experiments were in good agreement with the wet-chemical data. The NMR approach takes about the same analysis time as the conventional hydrolysis/chromatography analysis. However, it is a generally applicable and simple alternative without need for an extended sample preparation which is most useful if wet-chemical/chromatographic analyses are undesired or unavailable. Further studies have to concentrate on the validation of the analytical method and application to a larger sample array.     

Amino acid‐functionalized ethyl cellulose: Synthesis,characterization, and gas permeation properties

Amino acid esters of ethyl cellulose [R′ = H ( 1 ), CH₃ ( 2 ), CH₂CH(CH₃)₂ ( 3 ), CH₂CONH₂ ( 4 ), CH₂OCH₂C₆H₅ ( 5 , 5′ ), CH₂CH₂CH₂CH₂NHOCOC(CH₃)₃ ( 6 )] were synthesized in moderate to quantitative yields (30–99%) by the reaction of t‐butoxycarbonyl (t‐Boc)‐protected amino acids or an activated ester derivative with hydroxy groups of ethyl cellulose [EC; degree of substitution (DS_Et), 2.69]. The amino acid functionalities displaying varied chemical nature, shape, and bulk were used, and bulk of the substituent on the α‐carbon of amino acids was elucidated to be of vital significance for the observed degree of incorporation (DS_Est). ¹H NMR spectra were used to determine the degree of incorporation of amino acid moiety (DS_Est), and almost complete substitution of the hydroxy protons was revealed in 1 , 2 , and 5′ . The onset temperatures of weight loss of 1 – 6 were 198–218 °C, indicating fair thermal stability. The glass transition temperatures of the derivatized polymers were 30–40 °C lower than that of EC (T_g 131 °C; cf. T_g of 1 – 6 , 93.5–103 °C). Free‐standing membranes of EC and its amino acid esters ( 1 , 2 , 5 , 5′ , and 6 ) were fabricated, and enhanced permselectivity for CO₂/N₂ and CO₂/CH₄ gas pairs was discerned, when compared with EC. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3986–3993, 2010     

Sodium Carboxyl Methyl Cellulose for Improvement of the Determination of Polyethylene Glycol Modified Carbon Nanotubes by Raman Spectroscopy

Single-walled carbon nanotubes (SWNTs) have shown great potential in various areas of biomedicine. However, few research studies have focused on in vivo carbon nanotube detection by Raman spectroscopy. In this work, SWNTs were functionalized with polyethylene glycol (PEG) to form PEG-o-SWNTs to improve the biocompatibility and dispersibility. A novel application of Raman scattering was used to detect the PEG-o-SWNTs. Compared to the traditional assay method, the recovery rate was improved from 84.2% to 102.7%, the correlation coefficient of the standard curve increased from 0.7315 to 0.9872, and the degree of precision decreased from 4.4% to 3.1%. Large errors in the measured results were found the cryopreserved blood and organ samples in which the reticular sediments separated, on which the nanotubes generally concentrate. It was determined that by achieving a final concentration of 0.5% through the addition of sodium carboxyl methyl cellulose (CMC-Na), the homogeneity of the tested sample can be greatly enhanced, thus boosting the accuracy of the analyses. This work offers methods with higher accuracy for determining the presence of PEG-o-SWNTs in blood and organs using Raman spectroscopy.     

Simple synthesis of mixed cellulose acylate phosphonates applying n-propyl phosphonic acid anhydride

Cellulose mixed esters containing alkylphosphonate and carboxylate groups were prepared homogeneously by a new one-pot method using n-propyl phosphonic acid anhydride (T3P^?) in LiCl/N-methyl-2-pyrrolidone (NMP). n-Propyl phosphonic acid anhydride acts as both an activating agent for carboxylic acids and phosphonation reagent. Cellulose mixed esters with DS_acyl ranging from 1.4 to 1.8, and DS_phos up to 0.7 could be prepared. The structure of the cellulose mixed esters was elucidated by FTIR- and NMR spectroscopy, as well as by GPC and solubility tests.     

Full polysaccharide chitosan‐CMC membrane and silver nanocomposite: synthesis,characterization, and antibacterial behaviors

Chitosan‐carboxymethyl cellulose (CMC) full polysaccharide membrane was prepared by cross‐linking of chitosan with CMC dialdehyde and subsequent reductive amination. CMC dialdehyde molecule was prepared by periodate oxidation of CMC and then applied as a cross‐linking agent to form a new membrane network. The properties of oxidized CMC were investigated by various methods such as Fourier transform infrared (FT‐IR) spectroscopy, ¹H NMR spectroscopy, and viscosity test. Then, novel chitosan‐CMC silver nanocomposite was prepared using chitosan‐CMC as a carrier. The structure of the chitosan‐CMC membrane and the silver nanocomposite were confirmed by FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). TEM images indicate that the chitosan‐CMC nanocomposite comprises silver nanoparticles with diameters in the range of about 5–20 nm. The antibacterial studies of the nanocomposite were also evaluated. The chitosan‐CMC silver nanocomposite demonstrates good antibacterial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. Copyright © 2016 John Wiley & Sons, Ltd.     

Raman Spectroscopy of Iron in Aqueous Carbonate Solutions

Surface-enhanced Raman spectroscopy is used for in situ study of an iron surface in aqueous carbonate solutions both on open circuit and at constant potentials. Raman signals are assigned to FeCO₃ and adsorbed water. Formation of FeCO₃ corresponds to lowering of iron dissolution.     

Preparative and 1H NMR Investigation on Regioselective Silylation of Starch Dissolved in Dimethyl Sulfoxide

Reaction of starch 1 dissolved in dimethyl sulfoxide (DMSO) with bulky thexyldimethylchlorosilane (TDSCl) in the presence of pyridine leads to regioselectively functionalized silyl ethers with a degree of substitution (DS) up to 1.8. The control of the DS_Si, of the regioselectivity, and of the reaction pathway is described in detail. The reaction proceeds homogeneously up to DS_Si of 0.6. With ongoing silylation the polymers form a separate phase incorporating the silylating agent to form TDS‐starches with DS_Si values higher than 1.0. After peracetylation of the silyl starches, the substitution pattern has been characterized not only in the anhydroglucose repeating units (AGU) but also in the non‐reducing terminal end groups (TEG) by means of two‐dimensional ¹H NMR techniques. Up to DS_Si 1.0, a very high regioselective functionalization of the primary 6‐OH groups in the AGU as well as in the TEG is detectable. With increasing silylation (DS_Si > 1.0), the subsequent silylation takes place at the 2‐OH groups of the AGU and at the 3‐OH groups of the TEG. These results are compared with our own investigations on the silylation of starch in the reaction system N‐methylpyrrolidone (NMP)/ammonia and on the silylation of cellulose in N,N‐dimethylacetamide (DMA)/LiCl/pyridine solution.