Development and characterization of reactive extruded PVC/polyacrylate blends

This paper describes a method to obtain polymer blends by the absorption of a liquid solution of monomer, initiator, and a crosslinking agent in suspension type porous poly(vinyl chloride) (PVC) particles, forming a dry blend. These PVC/monomer dry blends are reactively polymerized in a twin‐screw extruder to obtain the in situ polymerization in a melt state of various blends: PVC/poly(methyl methacrylate) (PVC/PMMA), PVC/poly(vinyl acetate) (PVC/PVAc), PVC/poly(butyl acrylate) (PVC/PBA) and PVC/poly(ethylhexyl acrylate) (PVC/PEHA). Physical PVC/PMMA blends were produced, and the properties of those blends are compared to reactive blends of similar compositions. Owing to the high polymerization temperature (180°C), the polymers formed in this reactive polymerization process have low molecular weight. These short polymer chains plasticize the PVC phase reducing the melt viscosity, glass transition and the static modulus. Reactive blends of PVC/PMMA and PVC/PVAc are more compatible than the reactive PVC/PBA and PVC/PEHA blends. Reactive PVC/PMMA and PVC/PVAc blends are transparent, form single phase morphology, have single glass transition temperature (T_g), and show mechanical properties that are not inferior than that of neat PVC. Reactive PVC/PBA and PVC/PEHA blends are incompatible and two discrete phases are observed in each blend. However, those blends exhibit single glass transition owing to low content of the dispersed phase particles, which is probably too low to be detected by dynamic mechanical thermal analysis (DMTA) as a separate T_g value. The reactive PVC/PEHA show exceptional high elongation at break (～90%) owing to energy absorption optimized at this dispersed particle size (0.2–0.8 µm). Copyright © 2005 John Wiley & Sons, Ltd.     

Influence of α-Fe2O3 nanorods on the thermal stability of poly(methyl methacrylate) synthesized by in situ bulk polymerisation of methyl methacrylate

α-Fe₂O₃ nanorods were incorporated into poly(methyl methacrylate) (PMMA) by in situ radical polymerisation of methyl methacrylate initiated by 2,2′-azobisisobutyronitrile. The α-Fe₂O₃ nanorods were synthesized by forced hydrolysis of FeCl₃ and structural characterization was performed by X-ray diffraction and transmission electron microscopy. The molar mass and the polydispersity index of synthesized PMMA samples were determined by gel permeation chromatography. The content of residual monomer was determined by ¹H NMR spectroscopy. The influence of α-Fe₂O₃ nanorods on the thermal stability of the polymer was investigated using thermogravimetry and differential scanning calorimetry. The molar mass and polydispersity index of PMMA were dependent on the content of α-Fe₂O₃ nanorods. The values of the glass transition temperature of the nanocomposites were lower compared to pure PMMA. Also, the thermal stability of nanocomposites in nitrogen and air was different from that of pure PMMA.     

Computational synthesis,structure, and glass transition of (1,4) Cis‐polyisoprene‐based nanocomposite by multiscale modeling

The main goal of the present study was to produce insights from the atomistic modeling into the structural changes in elastomer‐based polymer nanocomposites caused by the surface modifications of the filler particles, and by the crosslinking of the participating polymer matrix. The fully atomistic molecular‐dynamics computer simulations of crosslinked (1,4) cis‐polyisoprene (PI) films capped by amorphous silica substrates was set‐up, in the presence of realistic coupling and covering agents. The PI film stratified structure has been studied in the proximity of the corresponding glass transition, by varying the degree of crosslinking and the PI film thickness. Some monomer ordering induced by the pristine (bare) silica disappeared almost completely in films with modified surfaces. The average monomer density increased with degree of crosslinking. As compared with PI bulk, the glass‐transition temperature was slightly larger for highly crosslinked PI films with bare silica and surfaces with coupling agents, and increased with increasing confinement. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 473–485     

Synthesis and characterization of silica‐graft‐polystyrene hybrid nanoparticles: Effect of constraint on the glass‐transition temperature of spherical polymer brushes

The effect of the chain constraint on the glass‐transition temperature of polystyrene (pS) was studied in the context of polymer tethering to curved surfaces. The synthesis and characterization of silica‐graft‐polystyrene (SiO₂‐g‐pS) hybrid nanoparticles is reported. Silica nanoparticles possessing covalently bound pS chains were prepared by the atom transfer radical polymerization of styrene from functionalized colloidal surfaces. These hybrid nanoparticles serve as interesting examples of spherical polymer brushes, as a high density of grafted pS was achieved on the inorganic colloid. The confirmation of a brushlike extension of immobilized chains in a good solvent was obtained with dynamic light scattering in toluene of SiO₂‐g‐pS colloids possessing various molar masses of tethered pS. The solid‐state morphology of SiO₂‐g‐pS ultrathin films was assessed with transmission electron microscopy, and this confirmed that the silica colloids were well‐dispersed in a matrix of the tethered polymer. Differential scanning calorimetry was used to study the effects of tethering and chain immobilization on the glass‐transition temperature of pS. The measured glass‐transition temperature of annealed bulk films of the hybrid nanoparticles was elevated with respect to the value for pure bulk pS. The enhancements ranged from 13 to 2 K for SiO₂‐g‐pS brushes possessing tethered pS with number‐average molecular weights of 5230 and 32,670 g/mol, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2667–2676, 2002     

Thermally stimulated depolarization currents of tactic polymethyl methacrylates and their mixtures

Summary Thermally stimulated depolarization currents (TSDC) of atactic (a), syndiotactic (s) and isotactic (i) PMMA and mixtures ofs- andi-PMMA were measured. In pure tactic PMMA, TSDC peak was obtained at a temperature corresponding to the glass transition temperature of each PMMA. TSDC of mixtures isolated as precipitates from 1/1 and 1/2 (i/sweight ratio) mixed solutions showed a peak which can be attributed to the glass transition temperature of the stereocomplex. TSDC of original l/1 mixture showed two peaks which are ascribed to the glass transition temperature of residual i-PMMA and the stereocomplex. The results suggests that stereocomplex formation occurs ini/s weight ratio of 1/2 independent of the way of preparation.With 9 figures and 1 table     

Glass transition broadening via nanofiller-contiguous polymer network in aromatic thermosetting copolyester nanocomposites

The glass transition is a genuine imprint of temperature-dependent structural relaxation dynamics of backbone chains in amorphous polymers, which can also reflect features of chemical transformations induced in macromolecular architectures. Optimization of thermophysical properties of polymer nanocomposites beyond the state of the art is contingent on strong interfacial bonding between nanofiller particles and host polymer matrix chains that accordingly modifies glass transition characteristics. Contemporary polymer nanocomposite configurations have demonstrated only marginal glass transition temperature shifts utilizing conventional polymer matrix and functionalized nanofiller combinations. We present nanofiller-contiguous polymer network with aromatic thermosetting copolyester nanocomposites in which carbon nanofillers covalently conjugate with cure advancing crosslinked backbone chains through functional end-groups of constituent precursor oligomers upon an in situ polymerization reaction. Via thoroughly transformed backbone chain configuration, the polymer nanocomposites demonstrate unprecedented glass transition peak broadening by about 100 °C along with significant temperature upshift of around 80 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1595–1603     

Synthesis and characterization of poly(methylmethacrylate)/silica nanocomposites: Study of the interphase by solid‐state NMR and structure/properties relationships

Organic/inorganic nanocomposites were synthesized from poly(methylmethacrylate) (PMMA) and properly modified silica nanoparticles by in situ polymerization. Methacryloylpropyltrimethoxysilane was selected as nanoparticle surface modifier because it is characterized by unsaturated end groups available to radical reactions, making possible to suppose their participation in the acrylic monomer polymerization. As a result of the above hypothesized reactions, a phase constituted by polyacrylic chains grafted onto modified silica surface was isolated. ²⁹Si and ¹³C solid‐state nuclear magnetic resonance experiments permitted to analyze this phase in terms of composition and chain mobility as well as to highlight interaction mechanisms occurring between growing PMMA oligoradicals and functional groups onto silica surface. It was demonstrated that this PMMA grafted onto silica surface acts as an effective coupling agent and assures a good dispersion of nanoparticles as well as a strong nanoparticle/matrix interfacial adhesion. As a result of strong interactions occurring between phases, a significant increase of the glass transition temperature was recorded. Finally, the abrasion resistance of PMMA in the hybrids was significantly improved as a result of a different abrasion propagation mechanism induced by silica particles thus overcoming one of the most serious PMMA drawback. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Structure of reactively extruded rigid PVC/PMMA blends

A novel route for producing polymer blends by reactive extrusion is described, starting from poly (vinyl chloride)/methyl methacrylate (PVC/MMA) dry blend and successive polymerization of MMA in an extruder. Small angle X‐ray scattering (SAXS) measurements were applied to study the monomer's mode of penetration into the PVC particles and to characterize the supermolecular structure of the reactive poly(vinyl chloride)/poly(methyl methacrylate) (PVC/PMMA) blends obtained, as compared to the corresponding physical blends of similar composition. These measurements indicate that the monomer molecules can easily penetrate into the PVC sub‐primary particles, separating the PVC chains. Moreover, the increased mobility of the PVC chains enables formation of an ordered lamellar structure, with an average d‐spacing of 4.1 nm. The same characteristic lamellar structure is further detected upon compression molding or extrusion of PVC and PVC/PMMA blends. In this case the mobility of the PVC chains is enabled through thermal energy. Dynamic mechanical thermal analysis (DMTA) and SAXS measurements of reactive and physical PVC/PMMA blends indicate that miscibility occurs between the PVC and PMMA chains. The studied reactive PVC/PMMA blends are found to be miscible, while the physical PVC/PMMA blends are only partially miscible. It can be suggested that the miscible PMMA chains weaken dipole–dipole interactions between the PVC chains, leading to high mobility and resulting in an increased PVC crystallinity degree and decreased PVC glass transition temperature (T_g). These phenomena are shown in the physical PVC/PMMA blends and further emphasized in the reactive PVC/PMMA blends. Copyright © 2005 John Wiley & Sons, Ltd.     

Enhancing the thermal and mechanical properties of PMMA using zinc carbazone complex as the initiator

A convincing mechanistic role that lies behind the elevation of thermal indicative parameters when using Zn carbazone as the initiator for the polymerization of methyl methacrylate monomer. The overall results summed up decisively that increasing concentration of the complex had led to an increase in the glass transition temperature, eliminated the scission of the head-to-head linkage, and the unsaturated end chains scissions. Improvements of the PMMA thermal parameters are thought to have arisen due to role played by the Zn carbazone in increasing the polymer stereospecificity. Tensile testing shows that there is a strong relation between the thermal and mechanical properties of PMMA.     

Thermal Analysis of Adsorbed Poly(methyl methacrylate) on Silica

Modulated differential scanning calorimetry has been used to quantify the glass transitions of small adsorbed amounts of poly(methyl methacrylate) (PMMA) on silica. While a relatively narrow, single glass transition was found for bulk PMMA, broader two-component transitions were found for the adsorbed polymer. A two-state model based on loosely bound polymer (glass transition similar to bulk) and more tightly bound polymer (glass transition centered around 156 degrees C) was used to interpret the thermograms. On the basis of this model, the amount of tightly bound polymer was found to be approximately 1.3 mg/m2, corresponding to a 1.1 nm thick layer. The change in heat capacity for the tightly bound polymer at the glass transition temperature was estimated to be about 16% of that of the bulk polymer.     

A Study of Photo- and Thermo-initiated Polymerised Dimethacrylates by Three Tthermal Analysis Techniques

Photo-initiated polymerisation of dimethacrylate oligomers provide an easy method for producing highly crosslinked polymer networks. The physical properties of the material are dependent on the polymerisation conversion value. The determination of this conversion value is quite difficult on the final product. The first step is to measure a characteristic temperature of the glass transition. The weakness of the DSC glass transition signal makes this measure unrealisable while the DMA tan peak is broad and weak. At the difference of these two thermal analysis techniques, TSDC gives an observable signal and a T_α temperature close to the glass transition temperature region. The bad sample preparation reproducibility observed was attributed to the high conversion rate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Influence of sample preparation and processing on observed glass transition temperatures of polymer nanocomposites

Polymer composites composed of poly(methyl methacrylate) (PMMA) and silica (14 nm diameter) have been investigated. The influences of sample preparation and processing have been probed. Two types of sample preparation methods were investigated: (i) solution mixture of PMMA and silica in methyl ethyl ketone and (ii) in situ synthesis of PMMA in the presence of silica. After removing all solvent or monomer, as confirmed using thermogravimetric analysis, and after compression molding, drops in T_g of 5–15 °C were observed for all composites (2–12% w/w silica) and even pure polymer reference samples. However, after additional annealing for 72 h at 140 °C, all previously observed drops in T_g disappeared, and the intrinsic T_g of bulk, pure PMMA was again observed. This is indicative of nonequilibrium trapped voids being present in the as‐molded samples. Field‐emission scanning electron microscopy was used to show well‐dispersed particles, and dynamic mechanical analysis was used to probe the mechanical properties (i.e., storage modulus) of the fully equilibrated composites. Even though no equilibrium T_g changes were observed, the addition of silica to the PMMA matrices was observed to improve the mechanical properties of the glassy polymer host. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2270–2276, 2007     

Variations of wettability and protein adsorption on solid siliceous carriers grafted with poly(N-isopropylacrylamide)

Poly(N-isopropylacrylamide), a thermally responsive polymer, was end-grafted to mercaptopropyl derivatives of silica gel, plane glass sheets and glass capillary tubing by free radical polymerization of the monomer in 1,4-dioxane at 100 degrees C. The polymer monolayer attached to the glass carriers provided them with thermally controlled wettability registered by two independent methods: direct measurements of the water contact angle and capillary rise. The water contact angle changed from 54+/-3 degrees to 68+/-3 degrees in the temperature range from 20 to 50 degrees C. The polymer grafting to silica gel (pore diameter 100 A, particle size 5 microm) resulted in 15-30-fold reduction in protein adsorption on the carrier at 35 degrees C. Adsorption isotherms of myoglobin indicate completely different characters of the protein adsorption to silica gel and its polyNIPAM-grafted derivative. Cooling of the grafted carrier containing adsorbed myoglobin to 9 degrees C led to a partial release of the protein to the contacting solution, whereas heating of the system to 35 degrees C resulted in reversible binding of the protein. Adsorption of myoglobin on polyNIPAM-coated silica was ca. 2-fold higher at 35 than at 9 degrees C, most probably due to steric repulsion displayed by the swollen copolymer at the lower temperature.     

Effects of molecular mass and surface treatment on adsorbed poly(methyl methacrylate) on silica

The behavior of relatively monodisperse adsorbed poly(methyl methacrylate) (PMMA) samples, from 19 to 587 kDa on silica, was studied using modulated differential scanning calorimetry and FTIR. On untreated Cab? O? Sil silica, the glass transition temperatures (T_gs) were higher (by around 30 °C), and the transitions were significantly broader (by a factor of 5–6) than those for the corresponding bulk samples. While the T_gs for the bulk polymers showed the expected dependence on molecular mass, the polymers on untreated silica showed little dependence, i.e., at the same adsorbed amounts, the glass transitions were very similar. The FTIR spectra of the adsorbed PMMA (on untreated silica) showed the presence of at least two resonances, one for the bound (hydrogen bonded to surface silanols) and another for free carbonyls. Fitting of the spectra allowed the estimation of the bound fractions of carbonyls that were dependent on the adsorbed amount, but not molecular mass. On Cab? O? Sil treated with hexamethyldisilizane (HMDS), the adsorbed PMMA exhibited glass transition behavior with little molecular‐mass dependence; the T_gs for the different PMMA samples were very similar to those of the high‐molecular mass bulk polymer, but with additional broadening of about a factor of 2. FTIR spectra for the PMMA samples on the treated silica did not show significant amounts of any of the hydrogen‐bonded carbonyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 649–658, 2008     

XPS characterisation of core-shell silica-polymer composite particles synthesised by atom transfer radical polymerisation in aqueous media

Near-monodisperse, siloxane-functionalised silica particles are used as a colloidal substrate for the surface-initiated polymerisation of various hydrophilic methacrylates: oligo(ethylene glycol) methacrylate (OEGMA), 2-(N-morpholino)ethyl methacrylate (MEMA), and ammonium 2-sulfatoethyl methacrylate (SEM) by atom transfer radical polymerisation in aqueous media at room temperature. The bulk and surface compositions of the resulting composite particles were assessed using various techniques. Thermogravimetric analysis of the resulting silica-polymer composites indicated polymer loadings of 5.4-8.6%, depending on the nature, structure and target degree of polymerisation (D_p). Dynamic light scattering studies indicate increases in hydrodynamic diameter of 14-87 nm compared to the reference silica particles. FT-IR spectroscopy confirmed additional features characteristic of the carbonyl group and pendant end-chain functionalities of the methacrylic polymer chains. The elemental and chemical surface compositions of the initial silica particles and final polymer-grafted composite particles were extensively investigated by X-ray photoelectron spectroscopy (XPS). The composite particles had appreciably higher C/Si atomic ratios, compared to the original initiator-functionalised silica particles, and these ratios increased with increasing target D_p. In addition, close inspection revealed that the relative intensities of the various components of the peak-fitted C1s envelopes varied significantly, depending on the target degree of polymerisation and the chemical structure of the methacrylic monomer. Moreover, in the case of the MEMA and SEM polymerisations, new nitrogen (MEMA) and sulfur (SEM) XPS signals were detected. This XPS study confirmed the presence of a thin outer layer of grafted polymer chains surrounding the silica particles.     

Functionalization of Graphene Sheets via Chemically Grafting of PMMA Chains Through in-situ Polymerization

In this work, we report the preparation of graphene nanoplatelet which covalently functionalized with PMMA chains by introduction of vinyl groups onto graphene surface through simple esterification reaction between hydroxyl groups of graphite oxide and methacrylic anhydride. The synthesis is followed by in-situ polymerization with MMA monomers. The structural properties were characterized with X-ray diffraction spectroscopy (XRD) and scanning electronic microscopy (SEM) that showed the crystalline graphite is converted to individual layers during the synthesis steps. The grafting of PMMA chains was monitored with IR spectroscopy (FT-IR) and thermogravimetric analysis (TGA). The TGA results revealed 40% wt of PMMA chains chemically grafted onto graphene surface. Significant increase in glass transition temperature (T_g) and existence of polymer chains in two positions (physically absorbed and chemically grafting onto graphite surface) are indicated by differential scanning calorimetric (DSC) analysis.     

Molecular dynamics simulation study of glass transition in hydrated Nafion

The thermal transition of Nafion is studied using a molecular dynamics simulation through a chemically realistic model. Static and dynamic properties of polymer melts with different water contents are investigated over a wide range of temperatures to obtain viscometric and calorimetric glass transition temperatures. The effect of cooling rate of the simulation on the glass transition of the hydrated polymer is also examined within the well‐known Williams–Landel–Ferry (WLF) equation. Variation of relaxation times versus temperature shows a fragile‐to‐strong transition. The hydration level has a significant impact on the static and dynamic properties of the polymer chains and water molecules confined in nanometric spaces between polymer chains. The results of this study are useful to predict the behavior of Nafion for various applications including fuel cells, sensors, actuators, and shape memory devices at different temperatures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 907–915     

Chromatographic investigation of the effect of dissolved carbon dioxide on the glass transition temperature of a polymer and the solubility of a third component (additive)

The effect of dissolved carbon dioxide on the glass transition temperature of a polymer, PMMA, has been investigated using molecular probe chromatography. The probe solute was iso-octane, and the specific retention volumes of this solute in pure PMMA and mixtures of PMMA with CO₂ were measured over a temperature range of 0 to 180°C and CO₂ pressures from 1 to 75 atm. The amount of CO₂ dissolved in the polymer was calculated from a model fit to previously published solubility data determined chromatographically. Classical van't Hoff-type plots were used to determine the glass transition temperature of CO₂-impregnated PMMA from low pressure up to 46 atm of CO₂. Solvent-induced plasticization was observed with the glass transition temperature decreasing by about 40°C. At some pressures, glass transitions at low temperatures could not be determined from the van't Hoff plots because of the proximity of the polymer glass transition temperature to the gas–liquid transition temperature for CO₂. For these pressures, a new method was developed to determine the glass transition composition. The glass transition pressure was then calculated from the measured composition and temperature using an isotherm model. In every case, the glass transition temperature decreased linearly with increasing concentration of CO₂ in the polymer. However, at higher compositions, the glass transition pressure decreased with increasing composition and decreasing temperature. The observed retention volume of iso-octane with PMMA in a glassy state was correlated with an adsorption model developed from a theory for liquid–solid chromatography derived by Martire. This model accurately described the observed decrease in retention of iso-octane by adsorption on the surface of glassy PMMA with increasing concentration of CO₂ dissolved in the polymer. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2537–2549, 1998     

Influence of macroinitiator’s glass transition temperature on the response times of polymer dispersed liquid crystals

Glass transition temperature (T_g), an important parameter of polymer, was reported to have great influence on the electro-optical properties of polymer dispersed liquid crystals (PDLCs). In this study, macroinitiators with different T_g were synthesised by reversible addition fragmentation chain transfer polymerisation, and used to prepare PDLCs with different T_g block chains. The effect of different T_g of the block chains on response times was investigated. It was found that rise time decreased and decay time increased with the decrease of the block chain’s T_g. We proposed a possible mechanism by which T_g of the block chains influence response times.     

Glass‐transition temperatures of nanostructured amorphous bulk polymers and their blends

Nanostructured amorphous bulk polymer samples were produced by processing them with small molecule hosts. Urea (U) and gamma‐cyclodextrin (γ‐CD) were utilized to form crystalline inclusion compounds (ICs) with low and high molecular weight as‐received (asr‐) poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), and their blends as included guests. Upon careful removal of the host crystalline U and γ‐CD lattices, nanostructured coalesced (c‐) bulk PVAc, PMMA, and PVAc/PMMA blend samples were obtained, and their glass‐transition temperatures, T_gs, measured. In addition, non‐stoichiometric (n‐s)‐IC samples of each were formed with γ‐CD as the host. The T_gs of the un‐threaded, un‐included portions of their chains were observed as a function of their degree of inclusion. In all the cases, these nanostructured PVAc and PMMA samples exhibited T_gs elevated above those of their as‐received and solution‐cast samples. Based on their comparison, several conclusions were reached concerning how their molecular weights, the organization of chains in their coalesced samples, and the degree of constraint experienced by un‐included portions of their chains in (n‐s)‐γ‐CD‐IC samples with different stoichiometries affect their chain mobilities and resultant T_gs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1041–1050