Thermal analysis of heat-treated silver fir wood and larval frass

Glasses having composition 5Li₂O–5ZnO– xBi₂O₃ –(90 ? x) P₂O₅ (x = 5, 10, 15, 20 and 25 mol%) were prepared by the normal melt quenching technique. Nanocomposite glass containing bismuth phosphate BiPO₄ nanocrystals was obtained, which can be attributed to homogeneous nucleation process. The formation of BiPO₄ nanocrystals was confirmed and characterized by X-ray diffraction patterns (XRD), transmission electron microscopy (TEM), differential scanning calorimetry, optical absorption (UV–Vis) and micro-hardness studies. The morphological analysis by XRD and TEM microscopy showed the formation of hexagonal BiPO₄ nanocrystals, and its estimated nanocrystalline sizes were found to be varying from 5.35 to 11.53 nm depending on the Bi₂O₃ concentrations. The density (ρ) and molar volume (V _m) were also determined and found to be in compositional dependence. Glass transition temperature (T _g) and glass crystallization temperature (T _c) were obtained and found to be increased (from 240.0 to 337.2 °C) with increasing Bi₂O₃ up to 20 mol% and then decreased (from 337.2 to 331.8 °C) due to the structural changes in the glass network. Effect of BiPO₄ content on the optical properties had been investigated. From the UV–Vis spectra, it was observed that the fundamental absorption edge shifts toward lower wavelengths, i.e., blueshifts with increasing Bi₂O₃ mol% up to 20 mol%, and then shifts toward higher wavelengths, i.e., redshifts beyond 20 mol%. It was also observed that the obtained E _opt (for indirect and direct transitions) increases with gradual increase in Bi₂O₃ content up to 20 mol% and then decreases beyond 20 mol%. This may be due to the introduction of Bi cations into the glass network as a network former up to 20 mol% causing a decrease in ΔE values, beyond 20 mol%, the introduction of Bi ions into the glass network interstitially leads to increase the values of ΔE. The optical properties of the present nanocrystallized glasses showed a quantum size dependence, in which the optical band gap energy (E _opt) was changed as a function of BiPO₄ nanocrystalline sizes.     

Biosynthesis and characterization of novel polyhydroxyalkanoate polymers with high elastic property by Cupriavidus necator PHB4 transformant

We attempted to synthesize novel polyhydroxyalkanoate (PHA) containing new 3-hydroxy-4-methylvalerate (3H4MV) monomer from the transformed strain of Cupriavidus necator PHB⁻4 harboring the PHA synthase gene of Chromobacterium sp. USM2 (phaC_Cs). Novel PHA containing SCL and MCL monomers were successfully synthesized from crude palm kernel oil (CPKO) and isocaproic acid. Results showed that P(3HB-co-1 mol% 3HV-co-3 mol% 3H4MV-co-18 mol% 3HHx) possessed higher thermal stability, higher elastomeric behavior at room temperature and higher ductility than the P(3HB-co-5 mol% 3HHx). The novel PHA film was found to possess an interesting rubber-like elasticity and flexibility property which has not been reported. The soil surface degradation study showed that the novel PHA film was degraded faster than the 3HB homopolymer and copolymer with 5 mol% of 3HHx.     

Environmental Degradation of Microbial Polyhydroxyalkanoates and Oil Palm-Based Composites

This paper investigates the degradation of polyhydroxyalkanoates and its biofiber composites in both soil and lake environment. Time-dependent changes in the weight loss of films were monitored. The rate of degradation of poly(3-hydroxybutyrate) [P(3HB)], poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-23?mol% 4HB)] and poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-9?mol% 3HV-co-19?mol% 4HB)] were investigated. The rate of degradation in the lake is higher compared to that in the soil. The highest rate of degradation in lake environment (15.6?% w/w week^?1) was observed with P(3HB-co-3HV-co-4HB) terpolymer. Additionally, the rate of degradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-38?mol% 3HV)] was compared to PHBV biofiber composites containing compatibilizers and empty fruit bunch (EFB). Here, composites with 30?% EFB displayed the highest rate of degradation both in the lake (25.6?% w/w week^?1) and soil (15.6?% w/w week^?1) environment.     

Proton-conducting membranes: poly (N-vinyl pyrrolidone) complexes with various ammonium salts

The present study focuses on the proton-conducting polymer electrolytes; poly (N-vinyl pyrrolidone)–ammonium thiocyanate and poly (N-vinyl pyrrolidone)–ammonium acetate prepared by solution casting technique. The XRD analysis indicates the amorphous nature of the polymer electrolytes. The Raman spectra of the C=O vibration of pure polymer PVP at 1,663 cm^?1 has been appeared as doublet in the polymer electrolytes. The introduction of this new peak in the salt-doped polymer electrolytes may be due to interaction of the cation with the polymer. The room temperature ionic conductivity σ _303κ has been found to be high, 1.7?×?10^?4 S cm^?1 for 80 mol% PVP–20 mol% NH₄SCN and 1.5?×?10^?6 S cm^?1 for 75 mol% PVP–25 mol% CH₃COONH₄. The polymer electrolytes have been tested for their application in Zn–air battery.     

Conductivity and thermal behavior of proton conducting polymer electrolyte based on poly (N-vinyl pyrrolidone)

The polymer electrolytes based on poly N-vinyl pyrrolidone (PVP) and ammonium thiocyanate (NH₄SCN) with different compositions have been prepared by solution casting technique. The amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. The shift in T_g values and the melting temperatures of the PVP-NH₄SCN electrolytes shown by DSC thermo-grams indicate an interaction between the polymer and the salt. The dependence of T_g and conductivity upon salt concentration have been discussed. The conductivity analysis shows that the 20 mol% ammonium thiocyanate doped polymer electrolyte exhibit high ionic conductivity and it has been found to be 1.7 × 10⁻⁴ S cm⁻¹, at room temperature. The conductivity values follow the Arrhenius equation and the activation energy for 20 mol% ammonium thiocyanate doped polymer electrolyte has been found to be 0.52 eV.     

New compound in the system Sc-Cr-B

The isothermal section of the phase diagram of Sc-Cr-B system at 800°C is constructed using the data of X-ray analysis. CrB₂ dissolves up to 5 mol% of ScB₂, and ScB₂ dissolves up to about 20 mol% of CrB₂. A new boride Sc₂CrB₆ was found and its crystal structure was established by single-crystal X-ray diffraction: Y₂ReB₆ type, space group Pbam, Z=4, a=8.7909(4), b=11.0541(6), c=3.2996(1)Å, diffractometer Kappa CCD-Nonius, MoKα, R_F=0.047, R_w=0.064.     

Selective enhancement effects of silver salts on the transition metal-catalyzed synthesis of gem-difluorinated heterocyclics using 2,2-difluorohomopropargyl amides

The addition of silver salts had an effect on the catalyst activity in the Pd(0)-catalyzed cyclization-coupling tandem reaction, as well as in the Rh(I)-catalyzed Pauson-Khand reaction. The cationic palladium complex generated from Pd(PPh₃)₄ (2.5 mol%) with AgSbF₆ (1.5 equiv.) activates the triple bond of 2,2-difluoropropargylic amides to give the 4,5-disubstituted 3,3-difluoro-γ-lactams, through a sequential 5-endo-dig cyclization and cross-coupling reaction. The γ-lactam was transformed into ring-opened monofluorovinylic compounds after silica-gel chromatography. Pauson-Khand reaction of fluorinated 1,7-enyne amides using catalytic amounts of [Rh(COD)₂]₂ (5 mol%) and AgOTf (20 mol%) gave the corresponding gem-difluorinated bicyclic lactam.     

Novel random copoly(arylene ether-thioether ketone)s based on 2,2-bis(4-mercaptophenyl)propane and 4,4′-dihydroxybiphenyl: Synthesis and properties

A series of novel poly(arylene ether-thioether ketone) random copolymers were synthesised by copolymerisation of 4,4′-difluorobenzophenone with bis(N,N-dimethyl-S-carbamate) of 2,2-bis(4-mercaptophenyl)propane (MBTA) and 4,4′-dihydroxybiphenyl (BP). The syntheses were performed using a one pot polymerisation method starting from different mole percentages of BP with respect to MBTA, varying from 20% to 80%. The copolymers were obtained in good yields and had molecular weights in the range 10,000–17,000 as determined by GPC. The structural proof was provided by ¹H-NMR spectroscopy. In order to study the effect of the copolymerisation on the thermal properties and crystal behaviour, also the poly(ether biphenyl ether ketone) homopolymer (PEBEK) has been synthesised using the same polymerisation method. The TGA analysis shows that the high stability of PEBEK is only slightly affected by the introduction of co-units in the chain. The copolymers with an amount of PEBEK variable from 80 to 50 mol% are crystalline, with percentage of crystallinity and melting temperature which decrease as the co-unit content increases. The samples with lower amount of PEBEK (40 and 20 mol%) are amorphous. The T_g values tend to decrease with the reduction of the percentage of PEBEK units.     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

The rheological similarity of the physical networks of different origin

It has been established that the Newtonian viscosity of solutions of styrene-acrylic acid (4 mol%) copolymers inionomeric form (0–50 mol%) in DMPh is proportional to exp n (n being the degree of neutralization). The principle of temperature-time-concentration superposition is applicable for the dependence of shear modulus on temperature (20–100°), frequency (10^?3–1.5 Hz), decree of neutralization (0–50 mol%) and concentration (15–45 g/dl). These facts can be explained in terms of the rheological similarity of physical networks connected with macromolecular chain entanglements and with salt group interactions. Some details of the model for concentrated polymer solutions are discussed.     

Synergy effects in mixed Bi2O3, MoO3 and V2O5 catalysts for selective oxidation of propylene

In this work, the possible synergy effects between Bi₂O₃, MoO₃ and V₂O₅, and between Bi₂Mo₃O₁₂ and BiVO₄, were investigated. The catalytic activity of the ??mechanical mixture?? of these compounds was measured. The mixture containing 36.96?mol% Bi₂O₃, 39.13?mol% MoO₃ and 23.91?mol% V₂O₅ (21.43?mol% Bi₂Mo₃O₁₂ and 78.57?mol% BiVO₄), corresponding to the compound Bi_1?x/3V_1?x Mo _x O₄ with x?=?0.45 (Bi_0.85V_0.55Mo_0.45O₄), exhibited the highest activity for the selective oxidation of propylene to acrolein. The mixed sample prepared chemically by a sol?Cgel method possessed higher activity than that of mechanical mixtures.     

The effect of TiO2 additives on the structural stability and thermal properties of yttria fully-stabilized zirconia

TiO₂(0–20 mol%)-8 mol% YSZ (8YSZ) ceramics were synthesized by a traditional solid-state reaction method. A cubic single phase was observed for 8YSZ, 4 mol% TiO₂-8YSZ and 8 mol% TiO₂-8YSZ. Tetragonal and cubic mixed phases were observed for 12–20 mol% TiO₂-8YSZ ceramics. The sintering temperature was 1,700 °C for 8YSZ and 4 mol% TiO₂-8YSZ ceramics, whereas it was 1,500 °C for 8–20 mol% TiO₂-8YSZ. The thermal conductivity at room temperature decreased in proportion to increasing TiO₂ content, from 3.0 to 2.3 W/m K. The specific heat of TiO₂-8YSZ ceramics was unaltered as the TiO₂ content changed.     

Chloride substitution in sodium borohydride

The dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH₄)_1−xCl_x is studied. The dissolution reaction is facilitated by two methods: ball milling or combination of ball milling and annealing at 300 °C for three days of NaBH₄-NaCl samples in molar ratios of 0.5:0.5 and 0.75:0.25. The degree of dissolution is studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data. The results show that dissolution of 10 mol% NaCl into NaBH₄, forming Na(BH₄)_0.9Cl_0.1, takes place during ball milling. A higher degree of dissolution of NaCl in NaBH₄ is obtained by annealing resulting in solid solutions containing up to 57 mol% NaCl, i.e. Na(BH₄)_0.43Cl_0.57. In addition, annealing results in dissolution of 10-20 mol% NaBH₄ into NaCl. The mechanism of the dissolution during annealing and the decomposition pathway of the solid solutions are studied by in situ SR-PXD. Furthermore, the stability upon hydrogen release and uptake were studied by Sieverts measurements.     

Synthesis of zirconium titanate with an ordered M-fergusonite (beta) structure

We report a new zirconium titanate compound (Zr,Ti)O₂ with 27.5-35 mol% titania (TiO₂) formed from the oxides at 35-38 kbar, 1400-1500 °C. Crystal structure investigations at atmospheric conditions with powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) revealed a monoclinic structure related to that of M-fergusonite (beta). Unit-cell dimensions (from 27.5 to 35 mol% TiO₂): a=7.267(20)-7.340(2) Å, b=10.435(3)-10.429(1) Å, c=5.023(11)-5.040(1) Å, β=136.45(12)-137.55(1)°, V=262.44(92)-260.40(12) Å³, Z=4. Rietveld refinement (R_F=1.55) of a sample with 32.8 mol% TiO₂ indicates that site A is 8-fold coordinated, mostly occupied by Zr, while site B has 6-fold average coordination, occupied by Ti and Zr. Site B is at least partly ordered, as indicated by superstructure reflections 0 0 1 and −2 0 1 detected with TEM, reducing the space group from C2/c to C2. Pronounced streaking of selected diffraction spots is linked to the boundaries of lamellar domains in twin orientation, with twin planes either (200) or (20−2). Adjacent lamellae differ slightly in composition, causing subtle asymmetry of the twin diffraction patterns.     

Mixed conductivity, structural and microstructural characterization of titania-doped yttria tetragonal zirconia polycrystalline/titania-doped yttria stabilized zirconia composite anode matrices

Taking advantage of the fact that TiO₂ additions to 8YSZ cause not only the formation of a titania-doped YSZ solid solution but also a titania-doped YTZP solid solution, composite materials based on both solutions were prepared by solid state reaction. In particular, additions of 15 mol% of TiO₂ give rise to composite materials constituted by 0.51 mol fraction titania-doped yttria tetragonal zirconia polycrystalline and 0.49 mol fraction titania-doped yttria stabilized zirconia (0.51TiYTZP/0.49TiYSZ). Furthermore, Y₂(Ti_1−yZr_y)₂O₇ pyrochlore is present as an impurity phase with y close to 1, according to FT-Raman results. Lower and higher additions of titania than that of 15 mol%, i.e., x=0, 5, 10, 20, 25 and 30 mol% were considered to study the evolution of 8YSZ phase as a function of the TiO₂ content. Furthermore, zirconium titanate phase (ZrTiO₄) is detected when the titania content is equal or higher than 20 mol% and this phase admits Y₂O₃ in solid solution according to FE-SEM-EDX.The 0.51TiYTZP/0.49TiYSZ duplex material was selected in this study to establish the mechanism of its electronic conduction under low oxygen partial pressures. In the pO₂ range from 0.21 to 10^−7.5 atm. the conductivity is predominantly ionic and constant over the range and its value is 0.01 S/cm. The ionic plus electronic conductivity is 0.02 S/cm at 1000 °C and 10^−12.3 atm. Furthermore, the onset of electronic conductivity under reducing conditions exhibits a −1/4 pO₂ dependence. Therefore, it is concluded that the n-type electronic conduction in the duplex material can be due to a small polaron-hopping between Ti³⁺ and Ti⁴⁺.     

A facile zirconium(IV) chloride catalysed selective deprotection of t-butyldimethylsilyl (TBDMS) ethers

A simple and efficient protocol for the selective deprotection of t-butyldimethylsilyl (TBDMS) ethers using 20 mol% ZrCl₄ in 20-45 min and in high yields, is reported, wherein it is demonstrated that acid and base sensitive groups and allylic and benzylic groups are unaffected.     

Catalytic arylsulfonyl radical-triggered 1,5-enyne-bicyclizations and hydrosulfonylation of α,β-conjugates

A catalytic bicyclization reaction of 1,5-enynes anchored by α,β-conjugates with arylsulfonyl radicals generated in situ from sulfonyl hydrazides has been established using TBAI (20 mol%) and Cu(OAc)₂ (5 mol%) as co-catalysts under convenient conditions. In addition, the use of benzoyl peroxide (BPO) as the oxidant and pivalic acid (PivOH) as an additive was proven to be necessary for this reaction. The reactions occurred through 5-exo-dig/6-endo-trig bicyclizations and homolytic aromatic substitution (HAS) cascade mechanisms to give benzo[b]fluorens regioselectively. A similar catalytic process was developed for the synthesis of γ-ketosulfones. These reactions feature readily accessible starting materials and simple one-pot operation.     

Efficient Catalytic Reduction of 4-Nitrophenol Using Copper(II) Complexes with N,O-Chelating Schiff Base Ligands

The reduction of 4-nitrophenol to 4-aminophenol by sodium borohydride was used as a model to test the catalytic activity of copper(II) complexes containing N,O-chelating Schiff base ligands. In this study, a series of copper(II) complexes containing respective Schiff base ligands, N′-salicylidene-2-aminophenol (1), N′-salicylidene-2-aminothiazole (2), and N,N′-bis(salicylidene)-o-phenylenediamine (3), were synthesized and characterized by elemental analysis, Fourier transform infrared (FT-IR), UV-Visible (UV-Vis) and electron paramagnetic resonance (EPR) spectroscopies. The results from the 4-nitrophenol reduction showed that 3 has the highest catalytic activities with 97.5% conversion, followed by 2 and 1 with 95.2% and 90.8% conversions, respectively. The optimization of the catalyst amount revealed that 1.0 mol% of the catalyst was the most optimized amount with the highest conversion compared to the other doses, 0.5 mol% and 1.5 mol%. Recyclability and reproducibility tests confirmed that all three complexes were active, efficient, and possess excellent reproducibility with consistent catalytic performances and could be used again without a major decrease in the catalytic activity.     

Novel hyperbranched polymers as host materials for green thermally activated delayed fluorescence OLEDs

A series of novel hyperbranched polymers(HBPs) consisting of a 2,7-subsituted 9-(heptadecan-9-yl)-9H-carbazole unit(A_2+A_2') and a tetra-substituted green thermally activated delayed fluorescence(TADF) dye of 2,3,5,6-tetra(9Hcarbazol-9-yl)-4-pyridinecarbonitrile(4CzCNPy, B4) have been synthesized via Suzuki cross-coupling reaction following an "A2+A2'+B_4" method. The polymers are named according to the polymerization ratio of 4CzCNPy monomer(5 mol%, 10 mol% and 15 mol% for HBPs of P2-P4 respectively, and 0 mol% for the control linear polymer P1). Their thermal, optoelectronic and electrochemical properties have been characterized by a combination of techniques. All the polymers exhibit high thermal stability with the decomposition temperatures(Td) above 400 ℃ and glass transition temperatures(Tg) up to 98 ℃. Unfortunately, the incorporation of TADF moiety into these HBP materials induced non-TADF characteristics. However, when the HBPs functionalized as the host for our previously developed 4CzCNPy TADF dopant in solution processed devices, maximum external quantum efficiency of 5.7% and current efficiency of 17.9 cd/A have been achieved in P3-based device, which is significantly higher than those of 1.5% and 4.2 cd/A for the linear polymer P1.     

Establishment of a metabolic pathway to introduce the 3-hydroxyhexanoate unit into LA-based polyesters via a reverse reaction of β-oxidation in Escherichia coli LS5218

New lactate (LA)-based terpolymers, P[LA-co-3-hydroxybutyrate (3HB)-co-3-hydroxyhexananoate (3HHx)]s, were produced in recombinant Escherichia coli LS5218 harboring three genes encoding LA-polymerizing enzyme (LPE), propionyl-coenzyme A (CoA) transferase (PCT) and (R)-specific enoyl-CoA hydratase (PhaJ4). When the recombinant LS5218 was grown on glucose with the feeding of butyrate, 3HB-CoA and 3HHx-CoA were supplied, probably via reverse reactions of the β-oxidation pathway and PhaJ4. LPE copolymerized the two monomers 3HB-CoA and 3HHx-CoA with LA-CoA, which was generated by PCT, to yield the terpolymers. Gas chromatography analysis revealed that the terpolymers consisted of 2.7-34 mol% LA, 38-81 mol% 3HB and 17-33 mol% 3HHx units, which can be varied depending on the butyrate concentration fed in the medium. In addition, ¹H-¹³C COSY NMR analysis provided evidence for a linkage between LA and 3HHx units in the polymer.