Metal organic chemical vapor deposition of ZnO from β‐ketoiminates

ZnO is a high‐mobility electron conductor being considered for high‐throughput electronics in flexible and transparent formats. We demonstrated the Zn β‐ketoiminate system, based on acetylacetimine with N‐propyl, isopropyl, and butyl groups, as a vehicle for preparing ZnO thin films for electronic applications. Surface carbon was a primary impurity, and the precursors studied afforded films with the lowest surface carbon contamination at deposition temperatures near 400°C. Thermal annealing of the films reduced the surface carbon content and afforded semiconducting materials. Annealing also gave larger‐grained, better connected films. Thinner films were associated with semiconducting as opposed to ohmic behavior; such films will be adaptable for transparent logic circuits. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and Structural Characterization of β‐Ketoiminate‐Stabilized Gallium Hydrides for Chemical Vapor Deposition Applications

Bis‐β‐ketoimine ligands of the form [(CH₂)_n{N(H)C(Me)?CHC(Me)?O}₂] (LⁿH₂, n=2, 3 and 4) were employed in the formation of a range of gallium complexes [Ga(Lⁿ)X] (X=Cl, Me, H), which were characterised by NMR spectroscopy, mass spectrometry and single‐crystal X‐ray diffraction analysis. The β‐ketoimine ligands have also been used for the stabilisation of rare gallium hydride species [Ga(Lⁿ)H] (n=2 ( 7 ); n=3 ( 8 )), which have been structurally characterised for the first time, confirming the formation of five‐coordinate, monomeric species. The stability of these hydrides has been probed through thermal analysis, revealing stability at temperatures in excess of 200 °C. The efficacy of all the gallium β‐ketoiminate complexes as molecular precursors for the deposition of gallium oxide thin films by chemical vapour deposition (CVD) has been investigated through thermogravimetric analysis and deposition studies, with the best results being found for a bimetallic gallium methyl complex [L³{GaMe₂}₂] ( 5 ) and the hydride [Ga(L³)H] ( 8 ). The resulting films ( F5 and F8 , respectively) were amorphous as‐deposited and thus were characterised primarily by XPS, EDXA and SEM techniques, which showed the formation of stoichiometric ( F5 ) and oxygen‐deficient ( F8 ) Ga₂O₃ thin films.     

Zinc and Copper Ions Induce Aggregation of Human β-Crystallins

Cataracts are defined as the clouding of the lens due to the formation of insoluble protein aggregates. Metal ions exposure has been recognized as a risk factor in the cataract formation process. The γ and β crystallins are members of a larger family and share several structural features. Several studies have shown that copper and zinc ions induce the formation of γ-crystallins aggregates. However, the interaction of metal ions with β-crystallins, some of the most abundant crystallins in the lens, has not been explored until now. Here, we evaluate the effect of Cu(II) and Zn(II) ions on the aggregation of HβA1, as a representative of the acidic form, and HβB2, as a representative of the basic β-crystallins. We used several biophysical techniques and computational methods to show that Cu(II) and Zn(II) induce aggregation following different pathways. Both metal ions destabilize the proteins and impact protein folding. Copper induced a small conformational change in HβA1, leading to high-molecular-weight light-scattering aggregates, while zinc is more aggressive towards HβB2 and induces a larger conformational change. Our work provides information on the mechanisms of metal-induced aggregation of β-crystallins.     

Nanostructural properties of zinc oxide thin films grown on non‐planar substrates

The crystallographic structure of zinc oxide thin films grown on optical fibres using single source chemical vapour deposition (SSCVD) was analysed using near edge X‐ray absorption fine structure (NEXAFS). Zinc diethyl carbamate was used as a precursor for the growth of highly conformal films in a one‐step deposition process without substrate rotation and at substrate temperatures of 400–575 °C. It was found that the growth temperatures greatly affected the crystallographic structure of the film with no preferred crystallographic orientation and negligible crystallinity at low temperatures and very high crystallinity with pure c‐axis orientation at high temperatures. Cross‐sectional analysis of the films by scanning electron microscopy (SEM) showed the presence of a film at all points around the fibre. These films generally consisted of densely packed columns that bore a strong resemblance to c‐axis‐oriented films grown on planar substrates. Copyright © 2005 John Wiley & Sons, Ltd.     

镍催化α,β-不饱和醛的选择性α,β-双芳基化反应

三组分双官能化反应是一种高效、简便构建C―C键、C―X键的方式. 双键广泛存在于众多有机化合物中, 对双键的双官能化反应研究有巨大的应用潜力. 本工作以Ni(COD)₂为催化剂, 以芳基溴化镁、芳基溴化物为芳基化试剂, 实现了3-芳基-2-丙烯醛亚胺中碳碳双键的双芳基化反应. 该反应建立了一个新的镍催化α,β-不饱和醛的α,β-双芳基化方法, 可以高度区域选择性地向底物分子中引入两个不同取代的芳环, 得到多种2,3,3-三芳基丙醛骨架的产物. 利用这一反应作为核心步骤实现了天然产物Quebecol的简便合成. 机理研究表明, 该反应可能经历了亲核加成、金属交换、还原消除的历程.     

Comparative Studies on Regioselectivity of α- and β-Linked Glucan Tosylation

Alpha- and beta-linked 1,3-glucans have been subjected to conversion with p-toluenesulfonic acid (tosyl) chloride and triethylamine under homogeneous reaction conditions in N,N-dimethyl acetamide/LiCl. Samples with a degree of substitution of tosyl groups (DS_Ts) of up to 1.91 were prepared by applying 5 mol reagent per mole repeating unit. Hence, the reactivity of α-1,3-glucan is comparable with cellulose and starch, while the β-1,3-linked glucan curdlan is less reactive. The samples dissolve in aprotic dipolar media independent of the DS_Ts and possess a solubility in less polar solvents that depends on the DS_Ts. NMR studies on the tosyl glucans and of the peracylated derivatives showed a preferred tosylation of position 2 of the repeating unit. However, the selectivity is less pronounced compared with starch. It could be concluded that the α-configurated glycosidic bond directs tosyl groups towards position 2.     

Zum chemischen Transport von CrOCl und Cr2O3 — Experimente und Modellrechnungen zur Beteiligung von CrOCl2,g

On the Chemical Transport of CrOCl and Cr₂O₃ - Experiments and Model Calculations for Participation of CrOCl_2,g . The migration of CrOCl in a temperature gradient (600°C→500°C) in the presence of chlorine is a result from an endothermic reaction . Above T₂ = 900°C several reactions are super imposed and Cr₂O₃, the product of the decomposition of CrOCl, migrates following the endothermic reaction . By continously monitoring the mass changes during the complete duration of the experiment the consecutive stationary deposition reactions could be registered separately and nonstationary changes in the gasphase could be recognized. The observed decomposition of solid CrOCl into Cr₂O_3,s as well as CrCl_3,g under equilibrium conditions is in accordance with thermochemical calculations assuming the heat of formation of CrOCl to be Δ_BH = - 135.3 ± 2 [kcal/mol]. Using this value the chemical transport of CrOCl with Cl₂, HCl, and HgCl₂ can be described.     

Gravimetric Study of Interaction of Water Vapour with Metallic Zinc

The interaction between samples of metallic zinc and water vapour was studied gravimetrically, both in the absence and in the presence of oxygen. The experimental total mass gain vs. time curves exhibited two plateaus, whose heights increased with, elevations both of relative humidity and of temperature. The amount of product retained on the surface after desorption was also determined as a function of time. The product was identified as hydrated zinc oxide. In the runs conducted without oxygen, the retained product curves displayed a time delay with respect to the total mass gain curves. In the presence of oxygen, however, there was practically only one chronogravimetric curve. This behaviour is interpreted on the basis of a common mechanism involving the formation of an intermediate precursor oxide, which is more readily formed in the presence of oxygen than in its absence. A set of mathematical equations was derived, from which the rate constants for both processes were obtained. The second step was ascribed to a further weak adsorption of water. This revised version was published online in July 2006 with corrections to the Cover Date.     

Redox deracemization of β,γ-alkynyl α-amino esters

The first non-enzymatic redox deracemization method using molecular oxygen as the terminal oxidant has been described. The one-pot deracemization of β,γ-alkynyl α-amino esters consisted of a copper-catalyzed aerobic oxidation and chiral phosphoric acid-catalyzed asymmetric transfer hydrogenation with excellent functional group compatibility. By using benzothiazoline as the reducing reagent, an exclusive chemoselectivity at the C N bond over the C C bond was achieved, allowing for efficient deracemization of a series of α-amino esters bearing diverse α-alkynyl substituent patterns. The origins of chemo- and enantio-selectivities were elucidated by experimental and computational mechanistic investigation. The generality of the strategy is further demonstrated by efficient deracemization of β,γ-alkenyl α-amino esters.

A one-pot deracemization of β,γ-alkynyl α-amino esters consisting of an aerobic oxidation and chiral phosphoric acid-catalyzed asymmetric transfer hydrogenation has been described.     

Trityl Cation-Catalyzed Hosomi-Sakurai Reaction of Allylsilane with β,γ-Unsaturated α-Ketoester to Form γ,γ-Disubstituted α-Ketoesters

(Ph₃C)[BPh(^F)₄]-catalyzed Hosomi-Sakurai allylation of allylsilanes with β,γ-unsaturated α-ketoesters has been developed to give γ,γ-disubstituted α-ketoesters in high yields with excellent chemoselectivity. Preliminary mechanistic studies suggest that trityl cation dominates the catalysis, while the silyl cation plays a minor role.     

Preparation of the In2O3·Sn Films by MO-CVD Technique

Introduction In₂O₃·Sn films have high transparency(>95％) within the visible spectral region, low resistivity(10^-2-10^-4 ohm·cm) at room temperature and superior thermal stability. These films have been applied to solar cells, electronics and photoelectronics fields. In recent years, organometallic-CVD method has emerged as a successful alternate to the physical methods and general CVDfor the growth of these films.     

The Role of Oxygen Dissociation in Plasma Enhanced Chemical Vapor Deposition of Zinc Oxide from Oxygen and Diethyl Zinc

The influence of electron impact dissociation of oxygen on neutral chemistry was studied for plasma-enhanced chemical vapor deposition (PECVD) of zinc oxide using oxygen and diethyl zinc. Electron conditions in the reactor were estimated based on simulations of well-known Ar-O₂ plasmas, while the majority of the thermal chemistry was abstracted from the combustion literature. A rudimentary model of film growth was developed using the rate of oxygen dissociation as the lone adjustable parameter.n Model results were compared directly with experimental measurements of deposition rates and neutral species densities for a wide range of conditions. Good quantitative agreement between experiments and model were observed as a function of composition and rf power. The system is highly sensitive to the electron impact dissociation of oxygen, which creates the radical pool that drives the majority of the chemistry. The approach detailed here provides a framework for the development of models of oxide PECVD derived from other metalorganic precursors.     

Synthetic Access to Aromatic α-Haloketones

α-Haloketones play an essential role in the synthesis of complex N-, S-, O-heterocycles; of which some exhibit a remarkable biological activity. Research further illustrated that α-bromo-, α-chloro-, and α-iodoketones are key precursors for blockbuster pharmacological compounds. Over the past twenty years, substantial advances have been made in the synthesis of these industrially relevant building blocks. Efforts have focused on rendering the synthetic protocols greener, more effective and versatile. In this survey, we summarised and thoroughly evaluated the progress of the field, established in the past two decades, in terms of generality, efficacy and sustainability.     

Selected β2-, β3- and β2,3-Amino Acid Heterocyclic Derivatives and Their Biological Perspective

Heterocyclic moieties, especially five and six-membered rings containing nitrogen, oxygen or sulfur atoms, are broadly distributed in nature. Among them, synthetic and natural alike are pharmacologically active compounds and have always been at the forefront of attention due to their pharmacological properties. Heterocycles can be divided into different groups based on the presence of characteristic structural motifs. The presence of β-amino acid and heterocyclic core in one compound is very interesting; additionally, it very often plays a vital role in their biological activity. Usually, such compounds are not considered to be chemicals containing a β-amino acid motif; however, considering them as this class of compounds may open new routes of their preparation and application as new drug precursors or even drugs. The possibility of their application as nonproteinogenic amino acid residues in peptide or peptide derivatives synthesis to prepare a new class of compounds is also promising. This review highlights the actual state of knowledge about β-amino acid moiety-containing heterocycles presenting antiviral, anti-inflammatory, antibacterial compounds, anaplastic lymphoma kinase (ALK) inhibitors, as well as agonist and antagonists of the receptors.     

Studies of the Electronic Effects of Zinc Cluster Catalysts and Their Application to the Transesterification of β‐Keto Esters

The electronic effects of tetranuclear zinc cluster catalysts on transesterification were investigated by changing the carboxylate ligands in the clusters. High catalyst activity crucially depended on the balance between Lewis acidity and Brønsted basicity of the catalyst; this was consistent with the dual activation of both the electrophile and nucleophile by the cooperative zinc centers. In addition, tetranuclear zinc cluster catalysts achieved the transesterification of β‐keto esters with unprecedented levels of broad substrate generality, in which a newly developed pentafluoropropionate‐bridged zinc cluster and 4‐dimethylaminopyridine additive greatly improved the reactivity of sterically congested α‐ and α,α‐disubstituted β‐keto esters.     

anti-Selective synthesis of β-boryl-α-amino acid derivatives by Cu-catalysed borylamination of α,β-unsaturated esters

A copper-catalysed regio- and diastereoselective borylamination of α,β-unsaturated esters with B₂pin₂ and hydroxylamines has been developed to deliver acyclic β-boryl-α-amino acid derivatives with high anti-diastereoselectivity (up to >99 : 1), which is difficult to obtain by the established methods. A chiral phosphoramidite ligand also successfully induces the enantioselectivity, giving the optically active β-borylated α-amino acids. The products can be stereospecifically transformed into β-functionalised α-amino acids, which are of potent interest in medicinal chemistry.

A Cu-catalysed regio-, diastereo-, and enantioselective borylamination of α,β-unsaturated esters with B₂pin₂ and hydroxylamines has been developed. The products can be converted into functionalised α-amino acids with two adjacent stereocentres.     

Pharmacophore Mapping Combined with dbCICA Reveal New Structural Features for the Development of Novel Ligands Targeting α4β2 and α7 Nicotinic Acetylcholine Receptors

The neuronal nicotinic acetylcholine receptors (nAChRs) belong to the ligand-gated ion channel (GLIC) group, presenting a crucial role in several biological processes and neuronal disorders. The α4β2 and α7 nAChRs are the most abundant in the central nervous system (CNS), being involved in challenging diseases such as epilepsy, Alzheimer’s disease, schizophrenia, and anxiety disorder, as well as alcohol and nicotine dependencies. In addition, in silico-based strategies may contribute to revealing new insights into drug design and virtual screening to find new drug candidates to treat CNS disorders. In this context, the pharmacophore maps were constructed and validated for the orthosteric sites of α4β2 and α7 nAChRs, through a docking-based Comparative Intermolecular Contacts Analysis (dbCICA). In this sense, bioactive ligands were retrieved from the literature for each receptor. A molecular docking protocol was developed for all ligands in both receptors by using GOLD software, considering GoldScore, ChemScore, ASP, and ChemPLP scoring functions. Output GOLD results were post-processed through dbCICA to identify critical contacts involved in protein-ligand interactions. Moreover, Crossminer software was used to construct a pharmacophoric map based on the most well-behaved ligands and negative contacts from the dbCICA model for each receptor. Both pharmacophore maps were validated by using a ROC curve. The results revealed important features for the ligands, such as the presence of hydrophobic regions, a planar ring, and hydrogen bond donor and acceptor atoms for α4β2. Parallelly, a non-planar ring region was identified for α7. These results can enable fragment-based drug design (FBDD) strategies, such as fragment growing, linking, and merging, allowing an increase in the activity of known fragments. Thus, our results can contribute to a further understanding of structural subunits presenting the potential for key ligand-receptor interactions, favoring the search in molecular databases and the design of novel ligands.     

Dicarboxylic Acid Monoesters in β- and δ-Lactam Synthesis

A N-(2-methoxy-2-oxoethyl)-N-(phenylsulfonyl)glycine monomethyl ester of the respective dicarboxylic acid was involved in a reaction with imines promoted by acetic anhydride at an elevated temperature. Instead of the initially expected δ-lactam products of the Castagnoli–Cushman-type reaction, medicinally important 3-amino-2-azetidinones were obtained as the result of cyclization, involving a methylene group adjacent to an acid moiety. In contrast, replacing alcohol residue with hexafluoroisopropyl in the same substrate made another methylene group (adjacent to the ester moiety) more reactive to furnishing the desired δ-lactam in the Castagnoli–Cushman fashion.     

Thin film growth of TiO2 and Ti2O3 by the new method of liquid injection CVD investigated using optical interferometry,XRD and AFM

The method of liquid injection chemical vapour deposition (LICVD) is a new technique, which is being developed for its potential to allow new material compositions and simpler and more flexible deposition schemes. The potential advantage of this technique is that it is possible to fix the precursor composition(s) in the injection solvent, permitting a simpler injection scheme compared to the current need for bubblers or gaseous precursors in CVD. In our system the precursor solution is rapidly volatilised into a carrier gas stream, which is then passed over the heated substrate. In this initial study we use the single component titanium tetraisopropoxide (TTIP) dissolved in THF for the injection solution, and investigate the behaviour of the deposition with in situ optical reflectometry and ex situ XRD and AFM. The data gained gives information on the growth rate, morphology and crystalline properties of the films. The characteristics of our deposition system are that we find a flux controlled growth mode, changes in the rate of deposition as a function of thickness, which are related to the surface morphology and the growth of Ti₂O₃ at temperatures above 450 °C. Copyright © 2006 John Wiley & Sons, Ltd.     

The Amyloid Fibril-Forming β-Sheet Regions of Amyloid β and α-Synuclein Preferentially Interact with the Molecular Chaperone 14-3-3ζ

14-3-3 proteins are abundant, intramolecular proteins that play a pivotal role in cellular signal transduction by interacting with phosphorylated ligands. In addition, they are molecular chaperones that prevent protein unfolding and aggregation under cellular stress conditions in a similar manner to the unrelated small heat-shock proteins. In vivo, amyloid β (Aβ) and α-synuclein (α-syn) form amyloid fibrils in Alzheimer’s and Parkinson’s diseases, respectively, a process that is intimately linked to the diseases’ progression. The 14-3-3ζ isoform potently inhibited in vitro fibril formation of the 40-amino acid form of Aβ (Aβ₄₀) but had little effect on α-syn aggregation. Solution-phase NMR spectroscopy of ¹⁵N-labeled Aβ₄₀ and A53T α-syn determined that unlabeled 14-3-3ζ interacted preferentially with hydrophobic regions of Aβ₄₀ (L11-H21 and G29-V40) and α-syn (V3-K10 and V40-K60). In both proteins, these regions adopt β-strands within the core of the amyloid fibrils prepared in vitro as well as those isolated from the inclusions of diseased individuals. The interaction with 14-3-3ζ is transient and occurs at the early stages of the fibrillar aggregation pathway to maintain the native, monomeric, and unfolded structure of Aβ₄₀ and α-syn. The N-terminal regions of α-syn interacting with 14-3-3ζ correspond with those that interact with other molecular chaperones as monitored by in-cell NMR spectroscopy.