Carbon Quantum Dots from Pomelo Peel as Fluorescence Probes for “Turn-Off–On” High-Sensitivity Detection of Fe3+ and L-Cysteine

This study designed a “turn-off–on” fluorescence analysis method based on carbon quantum dots (CQDs) to detect metal ions and amino acids in real sample systems. CQDs were derived from green pomelo peel via a one-step hydrothermal process. The co-doped CQDs with N and S atoms imparted excellent optical properties (quantum yield = 17.31%). The prepared CQDs could be used as fluorescent “turn-off” probes to detect Fe³⁺ with a limit of detection of 0.086 µM, a linear detection range of 0.1–160 µM, and recovery of 83.47–106.53% in water samples. The quenched CQD fluorescence could be turned on after adding L-cysteine (L-Cys), which allowed detection of L-Cys with a detection limit of 0.34 µM and linear range of 0.4–85 µM. Recovery of L-Cys in amino acid beverage was 87.08–122.74%. Visual paper-based testing strips and cellulose/CQDs composite hydrogels could be also used to detect Fe³⁺ and L-Cys.     

Carbazole‐based conjugated polymer covalently coated Fe3O4 nanoparticle as efficient and reversible Hg2+ optical probe

A type of fluorescent–magnetic dual‐function nanocomposite, Fe₃O₄@SiO₂@P‐2, was successfully obtained by Cu⁺‐catalyzed click reaction between acetylene (C?C? H)‐substituted carbazole‐based conjugated polymer ( P‐2) and azide‐terminated silica‐coated magnetic iron oxide nanoparticles (Fe₃O₄@SiO₂–N₃). Optical and magnetization analyses indicate that Fe₃O₄@SiO₂@P‐2 exhibits stable fluorescence and rapid magnetic response. The fluorescence of Fe₃O₄@SiO₂@P‐2 was quenched significantly in the presence of I^? and gave a detection limit (DL) of ～8.85 × 10^?7 M. Given the high binding constant and matching ratio between Hg²⁺ and I^?, the fluorescence of Fe₃O₄@SiO₂@P‐2/I^? complex recovered efficiently with the addition of Hg²⁺. A DL of ～4.17 × 10^?7 M was obtained by this probing system. Recycling of Fe₃O₄@SiO₂@P‐2 probe was readily achieved by simple magnetic separation. Results indicate that Fe₃O₄@SiO₂@P‐2 can be used as an “on–off–on” fluorescent switchable and recyclable Hg²⁺ probe. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3636–3645     

Catalytic gold nanoparticles for fluorescent detection of mercury(II) and lead(II) ions

In this study, we developed a fluorescence assay for the highly sensitive and selective detection of Hg²⁺ and Pb²⁺ ions using a gold nanoparticle (Au NP)-based probe. The Hg–Au and Pb–Au alloys that formed on the Au NP surfaces allowed the Au NPs to exhibit peroxidase-mimicking catalytic activity in the H₂O₂-mediated oxidation of Amplex UltraRed (AUR). The fluorescence of the AUR oxidation product increased upon increasing the concentration of either Hg²⁺ or Pb²⁺ ions. By controlling the pH values of 5 mM tris–acetate buffers at 7.0 and 9.0, this H₂O₂–AUR–Au NP probe detected Hg²⁺ and Pb²⁺ ions, respectively, both with limits of detection (signal-to-noise ratio: 3) of 4.0 nM. The fluorescence intensity of the AUR oxidation product was proportional to the concentrations of Hg²⁺ and Pb²⁺ ions over ranges 0.05–1 μM (R² = 0.993) and 0.05–5 μM (R² = 0.996), respectively. The H₂O₂–AUR–Au NP probe was highly selective for Hg²⁺ (>100-fold) and Pb²⁺ (>300-fold) ions in the presence of other tested metal ions. We validated the practicality of this simple, selective, and sensitive H₂O₂–AUR–Au NP probe through determination of the concentrations of Hg²⁺ and Pb²⁺ ions in a lake water sample and of Pb²⁺ ions in a blood sample. To the best of our knowledge, this system is the first example of Au NPs being used as enzyme-mimics for the fluorescence detection of Hg²⁺ and Pb²⁺ ions.     

Sensitive,Selective and Reliable Detection of Fe3+ in Lake Water via Carbon Dots-Based Fluorescence Assay

In this study, C-dots were facilely synthesized via microwave irradiation using citric acid and ethylenediamine as carbon precursors. The fluorescence emissions of the C-dots could be selectively quenched by Fe³⁺, and the degree of quenching was linearly related to the concentrations of Fe³⁺ presented. This phenomenon was utilized to develop a sensitive fluorescence assay for Fe³⁺ detection with broad linear range (0–250, 250–1200 μmol/L) and low detection limit (1.68 μmol/L). Most importantly, the assay demonstrated high reliability towards samples in deionized water, tap water and lake water, which should find potential applications for Fe³⁺ monitoring in complicated environments.     

Carbon Xerogel Nanostructures with Integrated Bi and Fe Components for Hydrogen Peroxide and Heavy Metal Detection

Multifunctional Bi- and Fe-modified carbon xerogel composites (CXBiFe), with different Fe concentrations, were obtained by a resorcinol–formaldehyde sol–gel method, followed by drying in ambient conditions and pyrolysis treatment. The morphological and structural characterization performed by X-ray diffraction (XRD), Raman spectroscopy, N₂ adsorption/desorption porosimetry, scanning electron microscopy (SEM) and scanning/transmission electron microscopy (STEM) analyses, indicates the formation of carbon-based nanocomposites with integrated Bi and Fe oxide nanoparticles. At higher Fe concentrations, Bi-Fe-O interactions lead to the formation of hybrid nanostructures and off-stoichiometric Bi₂Fe₄O₉ mullite-like structures together with an excess of iron oxide nanoparticles. To examine the effect of the Fe content on the electrochemical performance of the CXBiFe composites, the obtained powders were initially dispersed in a chitosan solution and applied on the surface of glassy carbon electrodes. Then, the multifunctional character of the CXBiFe systems is assessed by involving the obtained modified electrodes for the detection of different analytes, such as biomarkers (hydrogen peroxide) and heavy metal ions (i.e., Pb²⁺). The achieved results indicate a drop in the detection limit for H₂O₂ as Fe content increases. Even though the current results suggest that the surface modifications of the Bi phase with Fe and O impurities lower Pb²⁺ detection efficiencies, Pb²⁺ sensing well below the admitted concentrations for drinkable water is also noticed.     

Magnetic Nitrogen-Doped Porous Carbon Nanocomposite for Pb(II) Adsorption from Aqueous Solution

We report in the present study the in situ formation of magnetic nanoparticles (Fe₃O₄ or Fe) within porous N-doped carbon (Fe₃O₄/N@C) via simple impregnation, polymerization, and calcination sequentially. The synthesized nanocomposite structural properties were investigated using different techniques showing its good construction. The formed nanocomposite showed a saturation magnetization (M_s) of 23.0 emu g⁻¹ due to the implanted magnetic nanoparticles and high surface area from the porous N-doped carbon. The nanocomposite was formed as graphite-type layers. The well-synthesized nanocomposite showed a high adsorption affinity toward Pb²⁺ toxic ions. The nanosorbent showed a maximum adsorption capacity of 250.0 mg/g toward the Pb²⁺ metallic ions at pH of 5.5, initial Pb²⁺ concentration of 180.0 mg/L, and room temperature. Due to its superparamagnetic characteristics, an external magnet was used for the fast separation of the nanocomposite. This enabled the study of the nanocomposite reusability toward Pb²⁺ ions, showing good chemical stability even after six cycles. Subsequently, Fe₃O₄/N@C nanocomposite was shown to have excellent efficiency for the removal of toxic Pb²⁺ ions from water.     

Magnetically recoverable facile nanomaterials: Synthesis, characterization and application in remediation of heavy metals

The present work reports a facile route for ethylenediaminetetraacetic acid (EDTA) immobilization on the surface of amine-terminated Fe₃O₄ nanoparticles for remediation of heavy metals from aqueous solutions. Transmission electron microscopy images showed both Fe₃O₄–NH₂ and Fe₃O₄–NH₂/PEI-EDTA magnetic nanoparticles with an average diameter of 60 nm. The FT-IR study confirmed the chemical covalent modification of EDTA on the surface of amine-terminated magnetite nanoparticles. XRD analysis demonstrated that the magnetic nanoparticles had a high crystallinity before and after modification. Magnetic measurements indicated that these nanoparticles could be easily removed through external magnetic force. The research work on the adsorption revealed that the concentration of Pb²⁺ altered from 10 to 0.12 mg/L and it indicated that 98.8% of Pb²⁺ could be removed from aqueous solutions at pH 5.05, and Fe₃O₄–NH₂/PEI-EDTA loaded heavy metal ions after being treated with 0.1 M HCl could be used as a reusable nano-adsorbent.     

Lanthanide Molecular Species Generated Fe3O4@SiO2-TbDPA Nanosphere for the Efficient Determination of Nitrite

The presence of nitrite (NO₂⁻) in water and food leads to serious problems in public health and the environment. Therefore, it is important to develop a rapid and efficient method for the selective detection of NO₂⁻. In this work, the synthesis and characterization of magnetic Fe₃O₄@SiO₂-TbDPA nanoprobe have been carried out. The Fe₃O₄@SiO₂-TbDPA aqueous solution exhibits a strong green emission. Due to the addition of various concentrations of NO₂⁻ (0–100 μM), the fluorescence intensity has been suppressed. The nanoprobe Fe₃O₄@SiO₂-TbDPA exhibits excellent selectivity and sensitivity toward NO₂⁻ ions. Excellent linearity is obtained in the range of 5–80 μM with a detection limit of 1.03 μM. Furthermore, the presence of magnetic Fe₃O₄ nanoparticles in Fe₃O₄@SiO₂-TbDPA nanospheres will also facilitate the effective separation of Fe₃O₄@SiO₂-TbDPA from the aqueous solution. Our proposed strategy is expected to fabricate an organic-inorganic hybrid magnetic nanomaterial and can be used as an efficient sensor. It has been shown that this new strategy has numerous advantages, such as high stability, selectivity, and simplicity of operation. It demonstrates great potential for simple and convenient NO₂⁻ detection. It may expand to a variety of ranges in environmental monitoring and biomedical fields.     

Chitosan–iron oxide nanobiocomposite based immunosensor for ochratoxin-A

The rabbit immunoglobulin antibodies (IgGs) have been immobilized onto nanobiocomposite film of chitosan (CH)–iron oxide (Fe₃O₄₎ nanoparticles prepared onto indium–tin oxide (ITO) electrode for detection of ochratoxin-A (OTA). Excellent film forming ability and availability of –NH₂ group in CH and affinity of surface charged Fe₃O₄ nanoparticles for oxygen support the immobilization of IgGs. Differential pulse voltammettry (DPV) studies indicate that Fe₃O₄ nanoparticles provide increased electroactive surface area for loading of IgGs and improved electron transport between IgGs and electrode. IgGs/CH–Fe₃O₄ nanobiocomposite/ITO immunoelectrode exhibits improved characteristics such as low detection limit (0.5 ng dL⁻¹), fast response time (18 s) and high sensitivity (36 μA/ng dL⁻¹ cm⁻²) with respect to IgGs/CH/ITO immunoelectrode.     

Electrochemical sensor using graphene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanosheets functionalized with garlic extract for the detection of lead ion

Based on the modulated electronic properties of Fe₃O₄-graphene (Fe₃O₄/GN composite) as well as the outstanding complexation between Pb²⁺ and natural substances garlic extract (GE), a novel electrochemical sensor for the determination of Pb²⁺ in wastewater was prepared by immobilization of Fe₃O₄/GN composite integrated with GE onto the surface of glassy carbon electrode (GCE). Fe₃O₄/GN composite was employed as an electrochemical active probe for enhancing electrical response by facilitating charge transfer while GE was used to improve the selectivity and sensitivity of the proposed sensor to Pb²⁺ assay. The electrochemical sensing performance toward Pb²⁺ was appraised by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and square wave voltammetry (SWV). Under the optimized condition, the sensor exhibited two dynamic linear ranges (LDR) including 0.001 to 0.5 nM and 0.5 to 1000 nM with excellent low detection limit (LOD) of 0.0123 pM (S/N =?3) and quantification limit (LOQ) of 0.41 pM (S/N =?10). Meanwhile, it displayed remarkable stability, reproducibility (RSD of 3.61%, n =?3), and selectivity toward the assay for the 100-fold higher concentration of other heavy metal ions. Furthermore, the novel sensor has been successfully employed to detect Pb²⁺ from real water samples with satisfactory results.     

Preparation of Hollow Core–Shell Fe3O4/Nitrogen-Doped Carbon Nanocomposites for Lithium-Ion Batteries

Iron oxides are potential electrode materials for lithium-ion batteries because of their high theoretical capacities, low cost, rich resources, and their non-polluting properties. However, iron oxides demonstrate large volume expansion during the lithium intercalation process, resulting in the electrode material being crushed, which always results in poor cycle performance. In this paper, to solve the above problem, iron oxide/carbon nanocomposites with a hollow core–shell structure were designed. Firstly, an Fe₂O₃@polydopamine nanocomposite was prepared using an Fe₂O₃ nanocube and dopamine hydrochloride as precursors. Secondly, an Fe₃O₄@N-doped C composite was obtained by means of further carbonization treatment. Finally, Fe₃O₄@void@N-Doped C-x composites with core–shell structures with different void sizes were obtained by means of Fe₃O₄ etching. The effect of the etching time on the void size was studied. The electrochemical properties of the composites when used as lithium-ion battery materials were studied in more detail. The results showed that the sample that was obtained via etching for 5 h using 2 mol L⁻¹ HCl solution at 30 °C demonstrated better electrochemical performance. The discharge capacity of the Fe₃O₄@void@N-Doped C-5 was able to reach up to 1222 mA g h⁻¹ under 200 mA g⁻¹ after 100 cycles.     

A S2O32−‐Enhanced Fluorogenic Chemosensor for Fe3+ in Aqueous Media Based on a Boron–Fluorine Derivative

A fluorescent “turn‐on” probe for Fe³⁺ was investigated in an aqueous system based on a boron 2‐(2′‐pyridyl) imidazole complex (BOPIM‐dma). BOPIM‐dma shows weak or no fluorescence in polar solvents due to twisted intramolecular charge transfer, but the addition of Fe³⁺ to BOPIM‐dma leads to fluorescence switch‐on responses. The binding is highly selective to Fe³⁺ over other metal ions, indicating that BOPIM‐dma is a chemodosimeter for Fe³⁺. Furthermore, the existence of S₂O₃²⁻ could much enhance and stabilize the emission significantly, indicating that the BOPIM‐dma/Fe³⁺/S₂O₃²⁻ complexes are a strong fluorescence system, and can be used as a sensitive detector for Fe³⁺, with the limit of detection of 6.0 × 10⁻⁷ mol L⁻¹.     

用于检测重金属离子的磁性荧光复合微球

采用静电逐层自组装的方法,首先将PSS和PAH聚电解质交替沉积在CaCO₃中空微球表面,然后将Fe₃O₄磁性纳米粒子与CdSe量子点负载在中空微球表面不同的聚电解质层中,制备出具有磁性和荧光双重功能的复合微球,并将其作为荧光离子探针,研究了其对Cu²⁺和Pb²⁺离子检测的灵敏度、选择性及可行性。结果表明,复合微球显示出良好的磁性和荧光性能,对Cu²⁺和Pb²⁺离子的检测具有较高的灵敏度和选择性。尤为重要的是,可通过磁分离的方法将微球快速地从待测液中回收,从而能够避免量子点对环境造成的二次污染。     

A label-free colorimetric detection of lead ions by controlling the ligand shells of gold nanoparticles

We have developed a simple, colorimetric and label-free gold nanoparticle (Au NP)-based probe for the detection of Pb²⁺ ions in aqueous solution, operating on the principle that Pb²⁺ ions change the ligand shell of thiosulfate (S₂O₃²⁻)-passivated Au NPs. Au NPs reacted with S₂O₃²⁻ ions in solution to form Au⁺·S₂O₃²⁻ ligand shells on the Au NP surfaces, thereby inhibiting the access of 4-mercaptobutanol (4-MB). Surface-assisted laser desorption/ionization time-of-flight ionization mass spectrometry (SALDI-TOF MS) and inductively coupled plasma mass spectrometry (ICP-MS) measurements revealed that PbAu alloys formed on the surfaces of the Au NPs in the presence of Pb²⁺ ions; these alloys weakened the stability of the Au⁺·S₂O₃²⁻ ligand shells, enhancing the access of 4-MB to the Au NP surfaces and, therefore, inducing their aggregation. As a result, the surface plasmon resonance (SPR) absorption of the Au NPs red-shifted and broadened, allowing quantitation of the Pb²⁺ ions in the aqueous solution. This 4-MB/S₂O₃²⁻-Au NP probe is highly sensitive (linear detection range: 0.5-10 nM) and selective (by at least 100-fold over other metal ions) toward Pb²⁺ ions. This cost-effective sensing system allows the rapid and simple determination of the concentrations of Pb²⁺ ions in real samples (in this case, river water, Montana soil and urine samples).     

A Fluorescent Chemosensor for Al3+ Based on CO Isomerization Derivated from Curcumin

A simple and nontoxic fluorescent chemosensor of di‐O‐methyl curcumin has been prepared from curcumin. The sensor exhibited selective and sensitive fluorescent responses toward Al³⁺ over a wide range of metal ions, such as Mn²⁺, Ce³⁺, Pt²⁺, Sn⁴⁺, Hg⁺, Sb³⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Cu²⁺, Ni²⁺, Na⁺, NH₄⁺, Ag⁺, Pb²⁺, Zn²⁺, Fe²⁺, Fe³⁺, Hg²⁺ and Cr³⁺ in ethanol/water. The free ligand showed quite weak fluorescence emission due to the isomerization of C?O double bond in the excited state, however, after addition of Al³⁺, fluorescence emission results in a prominent fluorescence enhancement.     

Adsorption of Crystal Violet Dye Using Activated Carbon of Lemon Wood and Activated Carbon/Fe3O4 Magnetic Nanocomposite from Aqueous Solutions: A Kinetic,Equilibrium and Thermodynamic Study

Activated carbon prepared from lemon (Citrus limon) wood (ACL) and ACL/Fe₃O₄ magnetic nanocomposite were effectively used to remove the cationic dye of crystal violet (CV) from aqueous solutions. The results showed that Fe₃O₄ nanoparticles were successfully placed in the structure of ACL and the produced nanocomposites showed superior magnetic properties. It was found that pH was the most effective parameter in the CV dye adsorption and pH of 9 gave the maximum adsorption efficiency of 93.5% and 98.3% for ACL and ACL/Fe₃O₄, respectively. The Dubinin–Radushkevich (D-R) and Langmuir models were selected to investigate the CV dye adsorption equilibrium behavior for ACL and ACL/Fe₃O₄, respectively. A maximum adsorption capacity of 23.6 and 35.3 mg/g was obtained for ACL and ACL/Fe₃O₄, respectively indicating superior adsorption capacity of Fe₃O₄ nanoparticles. The kinetic data of the adsorption process followed the pseudo-second order (PSO) kinetic model, indicating that chemical mechanisms may have an effect on the CV dye adsorption. The negative values obtained for Gibb’s free energy parameter (−20 < ΔG < 0 kJ/mol) showed that the adsorption process using both types of the adsorbents was physical. Moreover, the CV dye adsorption enthalpy (ΔH) values of −45.4 for ACL and −56.9 kJ/mol for ACL/Fe₃O₄ were obtained indicating that the adsorption process was exothermic. Overall, ACL and ACL/Fe₃O₄ magnetic nanocomposites provide a novel and effective type of adsorbents to remove CV dye from the aqueous solutions.     

Fluorine-Nitrogen-Codoped Carbon Dots as Fluorescent Switch Probes for Selective Fe(III) and Ascorbic Acid Sensing in Living Cells

High-quality fluorescent probes based on carbon dots (CDs) have promising applications in many fields owing to their good stability, low toxicity, high quantum yield, and low raw material price. The fluorine- and nitrogen-doped fluorescent CDs (NFCDs) with blue fluorescence was successfully synthesized using 3-aminophenol and 2,4-difluorobenzoic acid as the raw material by the hydrothermal method. The NFCDs as probe can be used to directly and indirectly detect Fe³⁺ (detection range: 0.1–150 μM and detection limit: 0.14 μM) and ascorbic acid (AA) (detection range: 10–80 μM and detection limit: 0.11 μM). The NFCDs-based probe shows exceptional selectivity and strong anti-interference for Fe³⁺ and ascorbic acid (AA). In addition, we examined the response of NFCDs to Fe³⁺ and AA in living cells, which showed that the timely use of AA can reduce the effects of iron poisoning. This has important biological significance. This means that using NFCDs as fluorescent probes is beneficial for Fe³⁺ and AA detection and observing their dynamic changes in living cells. Thus, this work may contribute to the study of Fe³⁺- and AA-related diseases.     

Exploring fluorescent covalent organic frameworks for selective sensing of Fe<Superscript>3+</Superscript>

Covalent organic frameworks (COFs) have been widely applied in gas capture and separation, but the fluorescent property of COFs with large π-conjugated system tends to be underexplored. Here we report the fluorescent properties of several COFs including TaTa, DhaTab, TRITER-1 and TzDa and the effect of metal ions of Na⁺, Mg²⁺, K⁺, Ca²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺, Cd²⁺ and Fe³⁺ on the fluorescence of these COFs. The results show that only Fe³⁺ significantly quenched the fluorescence of the studied COFs. The possibility of the four COFs for selective sensing of Fe³⁺ was demonstrated. The possible mechanism of the effect of Fe³⁺ on the fluorescence of the COFs was based on the absorption competition quenching.     

Selective fluorescence response and magnetic separation probe for 2,4,6-trinitrotoluene based on iron oxide magnetic nanoparticles

Despite the rapid development of nanomaterials and nanotechnology, it is still desirable to develop novel nanoparticle-based techniques which are cost-effective, timesaving, and environment-friendly, and with ease of operation and procedural simplicity, for assay of target analytes. In the work discussed in this paper, the dye fluorescein isothiocyanate (FITC) was conjugated to 1,6-hexanediamine (HDA)-capped iron oxide magnetic nanoparticles (FITC–HDA Fe₃O₄ MNPs), and the product was characterized. HDA ligands on the surface of Fe₃O₄ MNPs can bind 2,4,6-trinitrotoluene (TNT) to form TNT anions by acid–base pairing interaction. Formation of TNT anions, and captured TNT substantially affect the emission of FITC on the surface of the Fe₃O₄ MNPs, resulting in quenching of the fluorescence at 519 nm. A novel FITC–HDA Fe₃O₄ MNPs-based probe featuring chemosensing and magnetic separation has therefore been constructed. i.e. FITC–HDA Fe₃O₄ MNPs had a highly selective fluorescence response and enabled magnetic separation of TNT from other nitroaromatic compounds by quenching of the emission of FITC and capture of TNT in aqueous solution. Very good linearity was observed for TNT concentrations in the range 0.05–1.5 μmol?L^?1, with a detection limit of 37.2 nmol?L^?1 and RSD of 4.7 % (n?=?7). Approximately 12 % of the total amount of TNT was captured. The proposed methods are well-suited to trace detection and capture of TNT in aqueous solution.

Synthesis of Fluorescent Carbon Dots and Their Application in Ascorbic Acid Detection

Water-soluble fluorescent carbon dots (CDs) were synthesized by a hydrothermal method using citric acid as the carbon source and ethylenediamine as the nitrogen source. The repeated and scale-up synthetic experiments were carried out to explore the feasibility of macroscopic preparation of CDs. The CDs/Fe³⁺ composite was prepared by the interaction of the CDs solution and Fe³⁺ solution. The optical properties, pH dependence and stability behavior of CDs or the CDs/Fe³⁺ composite were studied by ultraviolet spectroscopy and fluorescence spectroscopy. Following the principles of fluorescence quenching after the addition of Fe³⁺ and then the fluorescence recovery after the addition of asorbic acid, the fluorescence intensity of the carbon dots was measured at λex = 360 nm, λem = 460 nm. The content of ascorbic acid was calculated by quantitative analysis of the changing fluorescence intensity. The CDs/Fe³⁺ composite was applied to the determination of different active molecules, and it was found that the composite had specific recognition of ascorbic acid and showed an excellent linear relationship in 5.0–350.0 μmol·L⁻¹. Moreover, the detection limit was 3.11 μmol·L⁻¹. Satisfactory results were achieved when the method was applied to the ascorbic acid determination in jujube fruit. The fluorescent carbon dots composites prepared in this study may have broad application prospects in a rapid, sensitive and trace determination of ascorbic acid content during food processing.