Cell adhesion on nanotextured slippery superhydrophobic substrates

In this work, the response of Saos2 cells to polymeric surfaces with different roughness/density of nanometric dots produced by a tailored plasma-etching process has been studied. Topographical features have been evaluated by atomic force microscopy, while wetting behavior, in terms of water-surface adhesion energy, has been evaluated by measurements of drop sliding angle. Saos2 cytocompatibility has been investigated by scanning electron microscopy, fluorescent microscopy, and optical microscopy. The similarity in outer chemical composition has allowed isolation of the impact of the topographical features on cellular behavior. The results indicate that Saos2 cells respond differently to surfaces with different nanoscale topographical features, clearly showing a certain inhibition in cell adhesion when the nanoscale is particularly small. This effect appears to be attenuated in surfaces with relatively bigger nanofeatures, though these express a more pronounced slippery/dry wetting character.     

Engineering Substrate Topography at the Micro‐ and Nanoscale to Control Cell Function

The interaction of mammalian cells with nanoscale topography has proven to be an important signaling modality in controlling cell function. Naturally occurring nanotopographic structures within the extracellular matrix present surrounding cells with mechanotransductive cues that influence local migration, cell polarization, and other functions. Synthetically nanofabricated topography can also influence cell morphology, alignment, adhesion, migration, proliferation, and cytoskeleton organization. We review the use of in vitro synthetic cell–nanotopography interactions to control cell behavior and influence complex cellular processes, including stem‐cell differentiation and tissue organization. Future challenges and opportunities in cell–nanotopography engineering are also discussed, including the elucidation of mechanisms and applications in tissue engineering.     

Control of the water adhesion on hydrophobic micropillars by spray coating technique

We present an alternative approach for controlling the water adhesion on solid superhydrophobic surfaces by varying their coverage with a spray coating technique. In particular, micro-, submicro-, and nanorough surfaces were developed starting from photolithographically tailored SU-8 micropillars that were used as substrates for spraying first poly(tetrafluoroethylene) submicrometer particles and subsequently iron oxide nanoparticles. The sprayed particles serve to induce surface submicrometer and nanoscale roughness, rendering the SU-8 patterns superhydrophobic (apparent contact angle values of more than 150°), and also to tune the water adhesion between extreme states, turning the surfaces from “non-sticky” to “sticky” while preserving their superhydrophobicity. The influence of the chemical properties and of the geometrical characteristics of the functionalized surfaces on the wetting properties is discussed within the frame of the theory. This simple method can find various applications in the fabrication of microfluidic devices, smart surfaces, and biotechnological and antifouling materials.     

Cell and protein compatibility of parylene-C surfaces

Parylene-C, which is traditionally used to coat implantable devices, has emerged as a promising material to generate miniaturized devices due to its unique mechanical properties and inertness. In this paper we compared the surface properties and cell and protein compatibility of parylene-C relative to other commonly used BioMEMS materials. We evaluated the surface hydrophobicity and roughness of parylene-C and compared these results to those of tissue culture-treated polystyrene, poly(dimethylsiloxane) (PDMS), and glass. We also treated parylene-C and PDMS with air plasma, and coated the surfaces with fibronectin to demonstrate that biochemical treatments modify the surface properties of parylene-C. Although plasma treatment caused both parylene-C and PDMS to become hydrophilic, only parylene-C substrates retained their hydrophilic properties over time. Furthermore, parylene-C substrates display a higher degree of nanoscale surface roughness (>20 nm) than the other substrates. We also examined the level of BSA and IgG protein adsorption on various surfaces and found that surface plasma treatment decreased the degree of protein adsorption on both PDMS and parylene-C substrates. After testing the degree of cell adhesion and spreading of two mammalian cell types, NIH-3T3 fibroblasts and AML-12 hepatocytes, we found that the adhesion of both cell types to surface-treated parylene-C variants were comparable to standard tissue culture substrates, such as polystyrene. Overall, these results indicate that parylene-C, along with its surface-treated variants, could potentially be a useful material for fabricating cell-based microdevices.     

Correction of random surface roughness on colloidal probes in measuring adhesion

Atomic force microscopes (AFM) are commonly used to measure adhesion at nanoscale between two surfaces. To avoid uncertainties in the contact areas between the tip and the surface, colloidal probes have been used for adhesion measurements. We measured adhesion between glass spheres and silicon (100) surface using colloidal probes of different radii under controlled conditions (relative humidity of < 3%, temperature of 25 +/- 1 degrees C). Results showed that the adhesion forces did not correlate with the radii of the spheres as suggested by elastic contact mechanics theories. Surface roughness and random surface features were found on the surfaces of the colloidal probes. We evaluated various roughness parameters, Rumpf and Rabinovich models, and a load-bearing area correction model in an attempt to correct for the roughness effects on adhesion, but the results were unsatisfactory. We developed a new multiscale contact model taking into account elastic as well as plastic deformation in a successive contacting mode. The new model was able to correct for most of the surface roughness features except for surface ridges with sharp angular features, limited by the spherical asperity assumption made in the model.     

Controlling the wettability and adhesion of nanostructured poly-(p-xylylene) films

The hydrophobic surface properties of structured poly-(p-xylylene) (PPX) films, as measured by water wettability, are studied as functions of surface chemistry, film composition, and surface roughness. We demonstrate the fabrication of very hydrophobic surfaces and control over adhesion properties via nanoscale modulation of roughness, changes in composition, and alteration of the surface chemistry of PPX films. The formation of superhydrophobic surfaces through the chemisorption of fluoroalkylsiloxane coatings to hydroxyl sites created on the nanostructured PPX surface is also illustrated. The ability to control both hydrophobicity and adhesion using nanostructured PPX films is a promising development because it may lead to a new generation of coatings with applicability ranging from self-cleaning surfaces to robotics.     

Novel method to prepare morphologically rich polymeric surfaces for biomedical applications via phase separation and arrest of microgel particles

We outline here a simple method to prepare polymeric surfaces of controlled surface topography on the micrometer scale, via assembly and arrest of microgel particles, for use in a range of biological applications to modify cell adhesion and spreading. In previous work by other groups, it has transpired that topography on the nanoscale is unlikely to be useful for this purpose, as roughness on this scale is often covered or coated by serum derived proteins during the early stages of cell adhesion and cells can easily bridge nanoscale roughness. Therefore, in our work, we have focused on roughness or topographic variations on the micrometer length scale. The basic idea is to modify the interactions between particles, thereby causing the microgel particles to phase separate into particle-dense and particle-dilute domains and to arrest these domains on the surface. The result is the creation of surfaces with controlled topography. By changing the particle size, it is possible to alter the size of the pores formed and their distribution in the film. Preliminary results show that the system can readily be arrested into a homologous series of such structures (formed from microgel particles of the same size and same chemical structure) with biological implications. At the extremes of this series, large phenotypic differences are observed between cells, ranging (at one end) from localization of the cells in the pores to (at the other end) cells that avoid such localization, and remain extended, growing along the ridges between the pores. This constitutes a sort of cell localization transition on a surface with identical chemical components, where only the morphology has been adjusted.     

The role of few-asperity contacts in adhesion

The surface roughness of a few asperities and their influence on the work of adhesion is of scientific interest. Macroscale and nanoscale adhesion data have seemingly given inconsistent results. Despite the importance of bridging the gap between the two regimes, little experimental work has been done, presumably due to the difficulty of the experiment needed to determine how small amounts of surface roughness might influence adhesion data lying in between the two scales. To investigate the role of few-asperity contacts in adhesion, the pull-off force was measured between different sized atomic-force microscope (AFM) tips (with different roughnesses) and sample surfaces that had well-controlled material properties. There were seventeen tips of four different types, with radii from 200 nm to 60 microm. The samples were unpatterned single crystal silicon with a chemical silicon dioxide surface resulting from a standard silicon wafer clean. Some of the samples were treated with a few angstroms of vapor deposited diphenylsiloxane. We observed that the uncorrected (for surface roughness) pull-off force was independent of the radius of the AFM tip, which was contrary to all continuum-mechanics model predictions. To explain this behavior, we assumed that the interactions between the AFM tip and sample were additive, material properties were constant, and that the AFM tip, asperities, and sample surfaces were of uniform density. Based on these assumptions, we calculated a simple correction due to the measured root mean square (RMS) surface roughness of the AFM tips. The simple correction for the RMS surface roughness resulted in the expected dependence of the pull-off force on radius, but the magnitudes were higher than expected. Commercial and heat-treated AFM tips have minimal surface roughness and result in magnitudes that are more reliable. The relative uncertainty for the pull-off force was estimated to be 10%. In this paper, we derive how the cantilever and tip parameters contribute to the measured pull-off force and show how the corrected results compare with theory. Although much work is still needed, the work presented here should advance the understanding of adhesion between the macroscale and nanoscale regimes.     

Cell adhesion and surface properties of polystyrene surfaces grafted with poly(N-isopropylacrylamide)

Cell adhesion plays a key role in various aspects of biological and medical sciences. In this study, poly(Nisopropylacrylamide) (PNIPAM) was grafted on polystyrene surfaces using different solvents under UV radiation. Moreover, the relation between surface roughness and cell adhesion were evaluated by gravimetric, SEM, AFM, contact angle measurement and cellular analyses. The gravimetric analysis clearly indicated an increase in the grafting by adding 10% methanol to water. The study of surface topography by AFM images showed an increase in the surface roughness and as a result of which, a decrease in wettablity was observed. At 37 °C, epithelial cells were well attached and proliferated on the grafted surfaces, while these cells were spontaneously detached below 32 °C in the absence of any enzymes. Moreover, MTT assay and SEM images indicated good cell viability and an increase in cell adhesion caused by the roughness increase. The results of this study reveal the great potential of PNIPAM-grafted polystyrene for being used in the biomedical fields such as drug delivery systems, tissue engineering and cell separation.     

Superhydrophobicity on two-tier rough surfaces fabricated by controlled growth of aligned carbon nanotube arrays coated with fluorocarbon

Considerable effort has been expended on theoretical studies of superhydrophobic surfaces with two-tier (micro and nano) roughness, but experimental studies are few due to the difficulties in fabricating such surfaces in a controllable way. The objective of this work is to experimentally study the wetting and hydrophobicity of water droplets on two-tier rough surfaces for comparison with theoretical analyses. To compare wetting on micropatterned silicon surfaces with wetting on nanoscale roughness surfaces, two model systems are fabricated: carbon nanotube arrays on silicon wafers and carbon nanotube arrays on carbon nanotube films. All surfaces are coated with 20 nm thick fluorocarbon films to obtain low surface energies. The results show that the microstructural characteristics must be optimized to achieve stable superhydrophobicity on microscale rough surfaces. However, the presence of nanoscale roughness allows a much broader range of surface design criteria, decreases the contact angle hysteresis to less than 1 degrees , and establishes stable and robust superhydrophobicity, although nanoscale roughness could not increase the apparent contact angle significantly if the microscale roughness dominates.     

Fibronectin adsorption on tantalum: the influence of nanoroughness

The complex mechanisms of protein adsorption at the solid-liquid interface is of great importance in many research areas, including protein purification, biocompatibility of medical implants, biosensing, and biofouling. The protein adsorption process depends crucially on both the nanoscale chemistry and topography of the interface. Here, we investigate the adsorption of the cell-binding protein fibronectin on flat and nanometer scale rough tantalum oxide surfaces using ellipsometry and quartz crystal microbalance with dissipation (QCM-D). On the flat tantalum oxide surfaces, the interfacial protein spreading causes an increase in the rigidity and a decrease in the thickness of the adsorbed fibronectin layer with decreasing bulk protein concentration. For the tantalum oxide surfaces with well-controlled, stochastic nanometer scale roughness, similar concentration effects are observed for the rigidity of the fibronectin layer and saturated fibronectin uptake. However, we find that the nanorough tantalum oxide surfaces promote additional protein conformational changes, an effect especially apparent from the QCM-D signals, interpreted as an additional stiffening of the formed fibronectin layers.     

Engineering of a microfluidic cell culture platform embedded with nanoscale features

Cells residing in a microenvironment interact with the extracellular matrix (ECM) and neighboring cells. The ECM built from biomacromolecules often includes nanotopography. Through the ECM, interstitial flows facilitate transport of nutrients and play an important role in tissue maintenance and pathobiology. To create a microenvironment that can incorporate both nanotopography and flow for studies of cell-matrix interactions, we fabricated microfluidic channels endowed with nanopatterns suitable for dynamic culture. Using polymer thin film technology, we developed a versatile stitching technique to generate a large area of nanopatterned surface and a simple microtransfer assembly technique to assemble polydimethylsiloxane-based microfluidics. The cellular study showed that both nanotopography and fluid shear stress played a significant role in adhesion, spreading, and migration of human mesenchymal stem cells. The orientation and deformation of cytoskeleton and nuclei were regulated through the interplay of these two cues. The nanostructured microfluidic platform provides a useful tool to promote the fundamental understanding of cell-matrix interactions and may be used to regulate the fate of stem cells.     

Nanodrop on a nanorough solid surface: density functional theory considerations

The density distributions and contact angles of liquid nanodrops on nanorough solid surfaces are determined on the basis of a nonlocal density functional theory. Two kinds of roughness, chemical and physical, are examined. The former considers the substrate as a sequence of two kinds of semi-infinite vertical plates of equal thicknesses but of different natures with different strengths for the liquid-solid interactions. The physical roughness involves an ordered set of pillars on a flat homogeneous surface. Both hydrophobic and hydrophilic surfaces were considered. For the chemical roughness, the contact angle which the drop makes with the flat surface increases when the strength of the liquid-solid interaction for one kind of plates decreases with respect to the fixed value of the other kind of plates. Such a behavior is in agreement with the Cassie-Baxter expression derived from macroscopic considerations. For the physical roughness on a hydrophobic surface, the contact angle which a drop makes with the plane containing the tops of the pillars increases with increasing roughness. Such a behavior is consistent with the Wenzel formula developed for macroscopic drops. For hydrophilic surfaces, as the roughness increases the contact angle first increases, in contradiction with the Wenzel formula, which predicts for hydrophilic surfaces a decrease of the contact angle with increasing roughness. However, a further increase in roughness changes nonmonotonously the contact angle, and at some roughness, the drop disappears and only a liquid film is present on the surface. It was also found that the contact angle has a periodic dependence on the volume of the drop.     

Suppressed Migration and Enhanced Cisplatin Chemosensitivity in Human Cancer Cell Lines by Tuning the Molecular Mobility of Supramolecular Biomaterials

Cancer cells recognize physical cues transmitted from the surrounding microenvironment, and accordingly alter the migration and chemosensitivity. Cell adhesive biomaterials with tunable physical properties can contribute to the understanding of cancer cell responses, and development of new cancer therapies. Previously, it was reported that polyrotaxane-based surfaces with molecular mobility effectively modulate cellular functions via the yes-associated protein (YAP)-related signaling pathway. In the present study, the impact of molecular mobility of polyrotaxane surfaces on the migration and chemosensitivity of lung (A549), pancreatic (BxPC-3), and breast cancer (MDA-MB-231) cell lines is investigated, and it is found that the cellular spreading of adherent A549 and BxPC-3 cells and nuclear YAP translocation are promoted on low-mobility surfaces, suggesting that cancer cells alter their subcellular YAP localization in response to molecular mobility. Furthermore, low-mobility surfaces suppress cellular migration more than high-mobility surfaces. Additionally, low-mobility surfaces promote the cisplatin chemosensitivity of each cancer cell line to a greater extent than high-mobility surfaces. These results suggest that the molecular mobility of polyrotaxane surfaces suppresses cellular migration and enhances chemosensitivity via the subcellular translocation of YAP in cancer cells. Biointerfaces based on polyrotaxanes can thus be a new platform for elucidating cancer cell migration and chemoresistance mechanisms.     

Nanostructures increase water droplet adhesion on hierarchically rough superhydrophobic surfaces

Hierarchical roughness is known to effectively reduce the liquid-solid contact area and water droplet adhesion on superhydrophobic surfaces, which can be seen for example in the combination of submicrometer and micrometer scale structures on the lotus leaf. The submicrometer scale fine structures, which are often referred to as nanostructures in the literature, have an important role in the phenomenon of superhydrophobicity and low water droplet adhesion. Although the fine structures are generally termed as nanostructures, their actual dimensions are often at the submicrometer scale of hundreds of nanometers. Here we demonstrate that small nanometric structures can have very different effect on surface wetting compared to the large submicrometer scale structures. Hierarchically rough superhydrophobic TiO(2) nanoparticle surfaces generated by the liquid flame spray (LFS) on board and paper substrates revealed that the nanoscale surface structures have the opposite effect on the droplet adhesion compared to the larger submicrometer and micrometer scale structures. Variation in the hierarchical structure of the nanoparticle surfaces contributed to varying droplet adhesion between the high- and low-adhesive superhydrophobic states. Nanoscale structures did not contribute to superhydrophobicity, and there was no evidence of the formation of the liquid-solid-air composite interface around the nanostructures. Therefore, larger submicrometer and micrometer scale structures were needed to decrease the liquid-solid contact area and to cause the superhydrophobicity. Our study suggests that a drastic wetting transition occurs on superhydrophobic surfaces at the nanometre scale; i.e., the transition between the Cassie-Baxter and Wenzel wetting states will occur as the liquid-solid-air composite interface collapses around nanoscale structures. Consequently, water adheres tightly to the surface by penetrating into the nanostructure. The droplet adhesion mechanism presented in this paper gives valuable insight into a phenomenon of simultaneous superhydrophobicity and high water droplet adhesion and contributes to a more detailed comprehension of superhydrophobicity overall.     

Regulation of mesenchymal stem cell adhesion and orientation in 3D collagen scaffold by electrical stimulus

Cell adhesion and orientation are important for both natural and engineered tissues to fully achieve physiologic functions. Based on diverse cellular responses induced by electrical stimulus on 2D substrate, we applied non-invasive electrical stimulus to regulate cell adhesion and orientation of bone marrow-derived mesenchymal stem cells (MSCs) and fibroblasts in a reconstituted 3D collagen-based scaffold. While fibroblasts were induced to reorient perpendicularly in response to direct current electrical stimulus, rat MSCs showed only slight changes in cell reorientation. Multiphoton microscopy revealed that rat MSCs exhibited much stronger 3D adhesion, which appears to resist cell reorientation. Only in response to a large electrical stimulus (e.g., 10 V/cm), collagen fibers around rat MSCs became disconnected and loosely reorganized. In contrast, the collagen fibers surrounding the fibroblasts were entangled in a random network and became preferentially aligned in the direction of the electrical stimulus. When incubated with integrin antibodies, both fibroblasts and rat MSCs failed to respond to electrical stimulus, providing evidence that integrin-dependent molecular mechanisms are involved in 3D cell adhesion and orientation. Elucidation of physical regulation of 3D cell adhesion and orientation may offer a novel approach in controlling cell growth and differentiation and could be useful for stem cell-based therapeutic application and engineering tissue constructs.     

Nanoscale analyses of modified polypropylene microtubes internal surface: an approach covering topographical and force spectroscopic parameters

A nanoscale characterization of modified and unmodified polypropylene (PP) microtubes internal surface was performed to investigate their structural, chemical, and physical properties. Nanoroughness, stiffness, elasticity, attraction behavior, adhesion forces, and chemical environment were investigated to test some manufacturer statements regarding Axygen MAXYMum Recovery® products. They announced that this class of material presented special features, originated from a modification to the original PP resin and by using a diamond polished mould, providing lower retention and minor interference on laboratorial tests, such as low roughness and little interaction tendency. Then, in this study, modified and control internal surfaces of PP microtubes were compared by atomic force microscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. Nanoroughness and force spectroscopy parameters assessed by atomic force microscopy showed out as a sensible and high‐resolution technique, crucial to discriminate differences between the surfaces. This type of investigation can be considered as a promising approach that can be applied to other polymeric systems, considering nanoscale properties, physical/chemical modifications, and as an alternative route for quality control checking concerning polymeric surfaces. Copyright © 2013 John Wiley & Sons, Ltd.     

One-step controllable fabrication of superhydrophobic surfaces with special composite structure on zinc substrates

Stable superhydrophobic platinum surfaces have been effectively fabricated on the zinc substrates through one-step replacement deposition process without further modification or any other post-treatment procedures. The fabrication process was controllable, which could be testified by various morphologies and hydrophobic properties of different prepared samples. By conducting SEM and water CA analysis, the effects of reaction conditions on the surface morphology and hydrophobicity of the resulting surfaces were carefully studied. The results show that the optimum condition of superhydrophobic surface fabrication depends largely on the positioning of zinc plate and the concentrations of reactants. When the zinc plate was placed vertically and the concentration of PtCl(4) solution was 5 mmol/L, the zinc substrate would be covered by a novel and interesting composite structure. The structure was composed by microscale hexagonal cavities, densely packed nanoparticles layer and top micro- and nanoscale flower-like structures, which exhibit great surface roughness and porosity contributing to the superhydrophobicity. The maximal CA value of about 171° was obtained under the same reaction condition. The XRD, XPS and EDX results indicate that crystallite pure platinum nanoparticles were aggregated on the zinc substrates in accordance with a free deposition way.     

Extended DLVO interactions between spherical particles and rough surfaces

An "extended DLVO" approach that includes Lifshitz-van der Waals, Lewis acid-base, and electrostatic double layer interactions is used to describe interaction energies between spherical particles and rough surfaces. Favorable, unfavorable, and intermediate deposition conditions are simulated using surface properties representing common aquatic colloids and polymeric membranes. The surface element integration (SEI) technique and Derjaguin's integration method are employed to calculate interaction energy. Numerical simulations using SEI demonstrate that nanometer scale surface roughness features can produce a distribution of interaction energy profiles. Local interaction energies are statistically analyzed to define representative interaction energy profiles-minimum, average, and maximum-for various combinations of simulated particles and surfaces. In all cases, the magnitude of the average interaction energy profile is reduced, but the reduction of energy depends on particle size, asperity size, and density of asperities. In some cases, a surface that is on average unfavorable for deposition (repulsive) may possess locally favorable (attractive) sites solely due to nanoscale surface roughness. A weighted average of the analytical sphere-sphere and sphere-plate expressions of Derjaguin reasonably approximates the average interaction energy profiles predicted by the SEI model, where the weighting factor is based on the fraction of interactions involving asperities.