聚离子液体固载金纳米粒子的制备及其催化性能

合成了氨基功能化乙烯基咪唑离子液体(AIL),利用氨基固定金纳米粒子以及双键的聚合作用,获得了聚离子液体固载金纳米粒子的催化剂(GNPs-P-AIL).采用红外光谱、紫外-可见光谱和透射电子显微镜等方法对GNPs-P-AIL进行了表征.结果表明,AIL在固定金纳米粒子并聚合后仍然保持着离子液体的基本结构,金纳米粒子分布均匀,粒径为6～8 nm.GNPs-P-AIL催化剂对苯乙烯环氧化具有较好的催化活性,以双氧水为氧化剂,在60℃下反应6 h时,苯乙烯的转化率和环氧苯乙烷的选择性分别可达81.5%和88.3%.     

绿色离子液体中纳米钯催化剂的制备及其催化Heck-Mizoroki反应性能

发展了在非卤素绿色离子液体1-丁基-3-甲基咪唑离子液体乳酸盐中制备纳米Pd催化剂的简便化学方法.透射电镜结果表明,Pd纳米粒子高度分散在[Bmim]Lac离子液体中,平均粒径为2.2–3.1 nm.Pd纳米粒子的大小随着体系中[Bmim]Lac与Pd(OAc)2摩尔比减小和温度升高而增大.考察了离子液体稳定纳米Pd催化剂(PdNPs@[Bmim]Lac)催化Heck-Mizoroki反应性能,并对反应条件进行了优化.结果表明,所制备的离子液体稳定的纳米Pd催化剂在优化条件下可高效催化系列卤代芳烃与烯烃的Heck-Mizoroki反应,且可循环使用6次.     

离子液体介质中钌纳米粒子催化苯乙酮及其衍生物的不对称加氢反应

采用水溶性三(间-磺酸钠苯基)膦(TPPTS)作稳定剂, 在离子液体1-丁基-3-甲基-咪唑四氟硼酸盐([BMIM]BF4)或1-丁基-3-甲基-咪唑对甲基苯磺酸盐([BMIM][p-CH3C6H4SO3])介质中用氢气还原RuCl3·3H2O, 得到钌纳米粒子. 将此钌纳米粒子与(1S, 2S)-1,2-二苯基乙二胺(简称(1S, 2S)-DPEN)、KOH在离子液体/异丙醇介质中原位生成一种不对称加氢催化剂, 用于催化苯乙酮及其衍生物的不对称加氢反应. 实验结果表明, 离子液体介质中的纳米钌催化剂体系具有良好的催化活性和对映选择性. 在优化反应条件下, 催化苯乙酮获得了100%的转化率和79.1%的对映选择性. 并且产物经正己烷萃取后, 含有钌纳米粒子的离子液体可以循环使用.     

离子液体中离子型共聚高分子保护的铂纳米粒子催化剂催化肉桂醛选择性加氢

用离子型共聚高分子poly(NVP-co-VBIM Cl-)保护离子液体[bmim]BF4中的铂纳米粒子.以肉桂醛选择性加氢制肉桂醇反应来评价铂纳米粒子的催化活性.结果表明,该体系下得到的铂纳米粒子粒径分布均一,并具有很高的稳定性.在离子液体中,此种高分子保护的铂纳米粒子对肉桂醛加氢制肉桂醇表现出良好的活性(转化率>90%)和选择性(>95%).催化剂可多次循环,其活性和选择性均能良好保持.     

负载型离子液体催化芳香烯和甲醛的Prins缩合反应

采用溶胶凝胶法制备了一系列硅胶负载型离子液体催化剂(IL/sg),并成功应用于甲醛与苯乙烯及其衍生物的Prins反应中.利用红外光谱(FT-IR)、元素分析(EA)和氮气吸附-脱附等对催化剂结构进行了表征.研究表明,磺酸功能化离子液体1-甲基-3-丁磺酸基咪唑硫酸氢盐固载得到的负载型催化剂(Bs MIm HSO4/sg)表现出最佳的催化活性.在催化剂投料量为烯烃的3%,甲醛与烯烃摩尔比为4∶1,80℃下反应8 h,苯乙烯转化率达到了100%,产物选择性为90%.催化剂经简单的过滤分离后重复使用5次,仍保持良好的催化活性.此外,该催化体系具有较好的底物适用性.     

酸性离子液体中铂纳米粒子的制备、表征及应用

基于功能化离子液体的特性,开发出不使用聚合物保护剂制备铂纳米粒子并同时获得具有金属和酸活性中心双功能催化剂的新方法。首先,设计并合成出了一种新型季铵型质子(Br?nsted)酸性离子液体(N, N, N-三甲基-N-磺丁基硫酸氢铵([HSO₃-b-N(CH₃)₃]HSO₄)),然后,利用化学还原方法在该离子液体中制备了金属铂纳米粒子,并采用紫外光谱、傅立叶红外光谱、X-光电子能谱、透射电子显微镜和X射线衍射等方法对所制备的金属铂纳米粒子进行了结构表征。结果表明,所制备的铂纳米粒子具有面心立方结构,离子液体作为修饰剂修饰在铂纳米粒子的表面,有效地阻止了铂纳米粒子的团聚;将该含有铂纳米粒子的酸性离子液体作为双功能催化剂,直接用于硝基苯加氢合成对氨基苯酚反应,发现其具有良好的催化性能,在85 ℃、4 h、0.4 MPa条件下,硝基苯转化率为98.6%,对氨基苯酚收率为75.8%,回收的酸性离子液体纳米铂双功能催化体系中铂纳米粒子依然具有很好的分散性和稳定性。     

负载型金基催化剂Au/Fe(OH)3催化苯乙烯环氧化反应

用共沉淀法制备了Au/Fe(OH)3催化剂, 以叔丁基过氧化氢为氧化剂, 考察焙烧温度和金担载量等对苯乙烯环氧化反应的影响. 结果表明, 催化剂的焙烧温度、金担载量对苯乙烯环氧化反应有较大影响. 在室温下直接合成的质量分数为4.67%的Au/Fe(OH)3催化剂对苯乙烯环氧化反应显示了很好的催化活性, 于80 ℃反应3 h苯乙烯的转化率达到84.1%, 环氧苯乙烷的选择性达到71.5%. 通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)和Mössbauer分析, 发现催化剂的催化活性与金的价态及铁的化学存在状态有很大关系. 离子态Au3+与载体Fe(OH)3的协同作用对苯乙烯环氧化反应显示出很好的催化活性.     

Pd(OAc)2/Cu(OTf)2在离子液体BMImPF6中催化苯乙烯二聚反应的研究

在离子液体BMImPF₆中, 用不同的钯催化剂和Lewis酸三氟甲磺酸铜Cu(OTf)₂共催化苯乙烯二聚反应, 发现用Pd(OAc)₂/Cu(OTf)₂作催化剂, Pd/Cu物质的量之比为1～4时, 可高产率高选择性地获得苯乙烯二聚产物1,3-二苯基-1-丁烯. BMImPF₆对催化剂有较好的溶解性, 可固定催化剂体系, 使催化剂有效地与产品分离. 同时, α-甲基苯乙烯的二聚反应表明, 室温下不发生反应, 提高温度有利于反应进行.     

钇纳米光谱探针合成及荧光增敏法分析橙皮苷

以金属钇离子为原料,采用单宁酸直接还原法,以十六烷基三甲基溴化铵(CTAB)胶束和1-乙基-3-甲基咪唑乙基硫酸盐离子液体为修饰剂,制备钇纳米粒子.考察了离子液体对钇纳米粒子合成的影响,利用透射电镜表征所制得的粒子为金属钇纳米粒子.通过研究钇纳米粒子的光谱行为,建立了钇纳米荧光增敏法分析微量橙皮苷(HES)的方法.结果...     

Pd(OAc)2/Cu(OTf)2在离子液体BMImPF6中催化苯乙烯二聚反应的研究

在离子液体BMImPF₆中, 用不同的钯催化剂和Lewis酸三氟甲磺酸铜Cu(OTf)₂共催化苯乙烯二聚反应, 发现用Pd(OAc)₂/Cu(OTf)₂作催化剂, Pd/Cu物质的量之比为1～4时, 可高产率高选择性地获得苯乙烯二聚产物1,3-二苯基-1-丁烯. BMImPF₆对催化剂有较好的溶解性, 可固定催化剂体系, 使催化剂有效地与产品分离. 同时, α-甲基苯乙烯的二聚反应表明, 室温下不发生反应, 提高温度有利于反应进行.     

Simultaneous determination of the styrene unit content and assessment of molecular weight of triblock copolymers in adhesives by a size exclusion chromatography method

The content of styrene units in nonhydrogenated and hydrogenated styrene‐butadiene‐styrene and styrene‐isoprene‐styrene triblock copolymers significantly influences product performance. A size exclusion chromatography method was developed to determine the average styrene content of triblock copolymers blended with tackifier in adhesives. A complete separation of the triblock copolymer from the other additives was realized with size exclusion chromatography. The peak area ratio of the UV and refraction index signals of the copolymers at the same effective elution volume was correlated to the average styrene unit content using nuclear magnetic resonance spectroscopy with commercial copolymers as standards. The obtained calibration curves showed good linearity for both the hydrogenated and nonhydrogenated styrene‐butadiene‐styrene and styrene‐isoprene‐styrene triblock copolymers (r  = 0.974 for styrene contents of 19.3–46.3% for nonhydrogenated ones and r  = 0.970 for the styrene contents of 23–58.2% for hydrogenated ones). For copolymer blends, the developed method provided more accurate average styrene unit contents than nuclear magnetic resonance spectroscopy provided. These results were validated using two known copolymer blends consisting of either styrene‐isoprene‐styrene or hydrogenated styrene‐butadiene‐styrene and a hydrocarbon tackifying resin as well as an unknown adhesive with styrene‐butadiene‐styrene and an aromatic tackifying resin. The methodology can be readily applied to styrene‐containing polymers in blends such as poly(acrylonitrile‐butadiene styrene).     

Further Studies on Homo- and Copolymerization of Styrene through Metallocenic Initiator Systems

Summary: Binary metallocene-MAO and ternary diphenylzinc-metallocene-MAO initiator systems have been tested as initiators in the homopolymerization of styrene and also in its copolymerization with several diverse comonomers including substituted styrenes, styrene derivatives, α-olefins and dienes. Various titanocenes and zirconocenes and some exploratory experiment with hafnocene were carried out. The results indicate that titanocenes were more effective than zirconocenes in the homopolymerization of styrene while zirconocenes did better in α-olefin polymerization. It was found that titanocenes generated mainly syndiotactic polystyrene, s-PS, while zirconocenes yielded atactic polystyrene or, depending on the zirconocene, a low percentage of s-PS. For these types of initiators the polymerization process depends largely on the inductive effect of the substituents linked to the benzene ring of styrene and on its position (ortho, meta or para). Substituent multiplicity reduced markedly the effectiveness of these initiator systems. Styrene/isoprene polymerization was also studied using binary zirconocene-MAO initiator systems that yielded low conversions and also low molecular weight polymers.     

(d,d-二龙脑酰基甲烷)铁(Ⅲ)配合物催化苯乙烯不对称环氧化反应

 从天然樟脑的衍生物出发,用二异丙氨基溴化镁作为缩合剂,在温和的条件下合成了手性配体d,d-二龙脑酰基甲烷,然后将其与FeCl3络合,首次制备了(d,d-二龙脑酰基甲烷)铁(Ⅲ)配合物. 通过 1H NMR,IR和元素分析对配合物的结构进行了表征,并用它来催化苯乙烯在空气作用下的不对称环氧化反应,主要得到了S-苯基环氧乙烷. 考察了不同结构的醛、空气流量、催化剂用量和反应温度等因素对苯乙烯环氧化反应产物收率和光学ee值的影响. 结果表明,当醛为2-乙基丁醛,空气流量为12 ml/min,催化剂用量为2%和反应温度为30 ℃时,苯基环氧乙烷的收率和ee值最高,分别为89.7%和78.1%.     

苯乙烯-氯甲基苯乙烯-丙烯酸的胶乳微球共聚合

采用无乳化剂乳液聚合方法,研究了苯乙烯-氯甲基苯乙烯-丙烯酸胶乳微球的共聚合反应,探索了影响聚合反应的因素和规律,改善了微球的性能,有效地控制了微球的聚合稳定性和粒子形态,制备出单分散性好、表面清洁的胶乳微球。     

Electrochemical Generation of the 9,10-Antraquinone Radical Anions and Its Use in the Polystyrene Synthesis

The nature of active centers and anionic mechanism of the styrene polymerization during the 9,10-antraquinone electroreduction in the monomer-dimethylacetamide-alkali metal (or ammonium) perchlorate system is studied by voltammetry, ESR, IR- and UV-spectroscopy. It is shown that the potential of electrolysis depends on the supporting electrolyte composition; the association of the supporting electrolyte cation with the organic anion, in turn, affects the mechanism of the polymerization initiation and the macromolecule growth kinetics. The potential of generation of 9,10-antraquinone and the styrene conversion in catholyte increase with increasing radius of the supporting cation in the series Li⁺ <; Na⁺ <; K⁺ <; Rb⁺ <; Cs⁺ <; (C₂H₅)₄N⁺ <; (C₄H₉)₄N⁺.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

Synthesis and polymerization of styrene monomers bearing spiroorthoester structure and volume change during crosslinking by double ring‐opening of the pendant spiroorthoesters of the obtained polymers

Novel styrene monomers bearing a five or seven‐membered spiroorthoester structure (SOE5, SOE7) were synthesized and their radical polymerizations as well as volume change during crosslinking of the obtained polymers were investigated. SOE5 and SOE7 were prepared from 4‐vinylbenzyl glycidyl ether and γ‐butyrolactone or ε‐caprolactone using boron trifluoride diethyl ether complex as a catalyst, respectively. Radical polymerizations of these monomers using 2,2′‐azobisisobutyronitrile (AIBN) gave the corresponding styrene‐based polymers with keeping the spiroorthoester structures unchanged. These polymers could be transformed to networked polymers by heating with a sulfonium antimonate, a thermally latent cationic polymerization initiator. Copolymerization of SOE5 or SOE7 with styrene at various compositions was carried out to efficiently obtain the corresponding copolymers, respectively. These polymers and copolymers showed little volume shrinkage or slight volume expansion during the crosslinking. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1790–1795     

溶剂对SBS粘合金属氢化物电极的影响

ＳＢＳ粘合的金属氢化物电极的性能，尤其是循环性能优于ＰＴＦＥ、ＨＰＭＣ等粘合的ＭＨ电极．不同溶剂对ＳＢＳ粘合电极的性能影响较大，经丁酮化学处理后，以松节油为粘合剂溶剂的ＳＢＳ电极容量最大，内阻最小，大电流放电能力最强；压片温度对电极性能影响也较大，最佳压片温度为８０℃     

Characterization of acid sites on the external surface of zeolites

Styrene oligomerization in the presence of Pd(acac)₂+PPh₃+BF₃OEt₂ catalytic system (acac—acetylacetonate) has been studied. Styrene conversion at optimum conditons (T=343 K, B/Pd=7, P/Pd=2) was as high as 75,000 mol of C₃H₃ per mol of Pd in 7 h with a selectivity to dimers, mostly 1,3-diphenylbut-1-ene, up to 93%.