钙和钒离子对钒-溴过氧化物酶催化 H2O2 氧化环己烯反应的影响

 在溴化钾存在下, 大型海洋藻类珊瑚藻的钒-溴过氧化物酶 (V-BPO) 可在常温下催化 H₂O₂ 环氧化环己烯生成环氧环己烷. 通过用含 1.0 mmol/L 钒离子和 1.0 mmol/L 钙离子的缓冲溶液透析 V-BPO, 用恒流泵向反应体系中连续添加 H₂O₂, 并优化其它反应条件, 可提高该催化反应时空收率. 在优化的反应条件下, 产物环氧环己烷的时空收率为 4.79 g/(h•L), 对 H₂O₂ 的收率为 74%, 均比文献最高值提高了 78%.     

磷酸镍纳米管的合成及其催化环己烯环氧化反应性能

 在不添加有机模板剂的情况下, 通过尿素缓慢分解调节局部 pH 值, 水热法合成了具有均一孔道直径的磷酸镍纳米管材料 (NiPO-NTs). 采用 N2 吸附-脱附、吡啶吸附红外光谱和氨程序升温脱附对材料进行了表征, 并将其用于催化 H2O2 氧化的环己烯反应中, 考察了反应条件对环氧化反应性能的影响. 结果表明, NiPO-NTs 具有狭窄的孔径分布, 比表面积为 96.6 m2/g, 其表面酸中心以弱 Lewis 酸为主. 该反应中以乙腈为溶剂较为适宜, 高温和高 H2O2/环己烯摩尔比有利于提高环己烯转化率; 而低温和高 H2O2/环己烯摩尔比有利于提高环氧环己烷选择性. 在 60 oC, H2O2/环己烯摩尔比为 3, 反应 6 h 时, 环己烯转化率可达 50.6%, 环氧环己烷选择性为 72.1%.     

无催化剂条件下环辛烯环氧化反应

以O2气为氧源,在无溶剂无引发剂条件下,研究了非催化剂体系中环辛烯环氧化反应,并考察了反应温度、时间、压力、自由基引发剂以及自由基阻聚剂对环辛烯环氧化反应的影响. 实验结果表明,在无催化剂条件下,当反应初压0.60 MPa,反应时间2.0 h时,在140 ℃的较高温度下,以分子氧为氧源,环辛烯的转化率为44.5%,环氧环辛烷的选择性可达到64.4%.     

离子液体中Mn(salen)催化环己烯环氧化反应

 研究了离子液体中Mn(salen)络合物催化环己烯的环氧化反应,考察了反应介质、 Mn(salen)络合物催化剂结构和反应条件等对环氧化反应的影响. 在离子液体-CH2Cl2混合溶剂中,以相对廉价的H2O2为氧化剂,得到了高的环己烯转化率和环氧环己烷选择性. 当以邻苯二胺和水杨醛制备的Mn(salen)络合物为催化剂,反应温度为273 K时,在［bmim］BF4-CH2Cl2的混合溶剂中,环己烯的转化率和环氧环己烷选择性分别可达100%和94.0%. 此外,反应结束后,产物可以由正己烷萃取出来,解决了传统均相催化体系中催化剂与产物不易分离的问题.     

无催化剂条件下环辛烯环氧化反应的研究

以氧气为氧源,在无溶剂无引发剂条件下,研究了非催化剂体系中环辛烯环氧化反应,并考察了反应温度、时间、压力、自由基引发剂以及自由基阻聚剂对环辛烯环氧化反应的影响。实验结果表明,在无催化剂条件下,当反应压力0.60MPa,反应时间2.0 h时,在140℃的较高温度下,以分子氧为氧源,环辛烯的转化率为44.46%,环氧环辛烷的选择性可达到64.39%。     

水果及环境水样中苯醚甲环唑的高灵敏免疫分析方法研究

采用辣根过氧化物酶(HRP)催化氧化四甲基联苯胺(TMB)显色为信号输出系统,结合间接竞争反应模式建立了水果及环境水样中苯醚甲环唑的间接竞争酶联免疫分析方法(ic ELISA)。基于高特异性单克隆抗体,通过逐步优化策略,确定最佳免疫分析条件为：包被原与抗体质量浓度组合为62.5 ng/mL和0.318μg/mL,一抗竞争反应缓冲溶液为含0.05%Tween-20的0.01 mol/L磷酸盐缓冲液(PBST,pH 7.4),一抗竞争反应时间为20 min,酶标二抗稀释液为0.01 mol/L磷酸盐缓冲液(PBS,pH 7.4),酶标二抗反应时间为30 min。在该条件下,苯醚甲环唑的线性检测范围(IC₂₀～IC₈₀)为0.49～3.90 ng/mL,半数抑制浓度(IC₅₀)为1.38 ng/mL,检出限(LOD)为0.33 ng/mL。在柑橘、葡萄、香蕉、草莓田水、湖水和河水样品中的平均加标回收率为72.3%～132%,相对标准偏差(RSD)不大于13%,对10种结构和功能类似物的交叉反应率(CR)均小于0.2%。该方法准...     

Ti-Beta分子筛的控制合成及高效催化环己烯环氧化

构建了以H₂O₂为氧化剂催化环己烯合成环氧环己烷的高效、 绿色催化反应体系. 在不加入铝源的情况下, 以四乙基氢氧化铵(TEAOH)为模板剂, 通过改进的干胶转化法控制H₂O/SiO₂摩尔比为1.5合成出Ti-Beta分子筛. 实验结果表明, 适宜的酸碱性、 含水量以及模板剂用量显著影响分子筛的结晶度, 同时影响晶粒尺寸和晶粒尺寸的均一性. 通过对Ti-Beta分子筛原粉进行焙烧处理制得Ti-Beta分子筛催化剂, 再通过对反应溶剂、 反应温度和反应时间的筛选和优化, 获得最优催化反应条件, 在该条件下, 环己烯转化率可达33.5%, 环氧环己烷选择性可达99.6%. 实验结果表明该催化剂是一种高效的多相催化剂.     

Schiff碱铁配合物催化环己烯环氧化

合成了一种吡啶甲醛类Schiff碱铁配合物[Fe(PA2OPd)C12]Cl,并考察了配合物对环己烯绿色环氧化反应的催化活性及反应条件,结果表明:吡啶甲醛类Schiff碱铁配合物对环己烯的环氧化反应有比较高的催化活性及选择性.以过氧化氢为氧源、[Fe(PA2OPd)C12]Cl为催化剂、在pH=5.0左右的乙酸乙酯溶液中25℃反应6.0 h,环己烯转化率可达90.5%,环氧环己烷选择性可达97.2%.     

离子液体中V2O5催化环己烯选择氧化合成 2-环己烯酮

研究了以V2O5为催化剂,H2O2为氧化剂,在室温离子液体中环己烯氧化制备2-环己烯酮的反应.考察了离子液体种类、反应温度、催化剂用量和氧化剂用量等因素对2-环己烯酮产率的影响.结果表明,在H2O2用量为110 mmol,V2O5/环己烯摩尔比为2%,反应温度为313 K的条件下,在[bmim]BF4离子液体中反应10 h后,环己烯的转化率和2-环己烯酮选择性分别为88.7%和91.1%.对含离子液体的催化体系的重复使用性能进行了考察.结果发现,随着使用次数的增加,环己烯的转化率以及2-环己烯酮的选择性有所下降.     

聚苯乙烯负载席夫碱Mo(Ⅵ)配合物合成、表征及其在环己烯环氧化反应中的催化活性

合成了聚苯乙烯负载乙二胺缩水杨醛席夫碱与Mo(Ⅵ)的配合物,并对其结构进行了表征.该配合物催化环己烯环氧化反应与小分子配合物MoO₂(acac)₂相比,具有更优良的催化活性和选择性;建立了催化剂中Mo分析和环氧环己烷气相色谱分析新方法;探讨了配合物及环氧环己烷合成过程诸因素的影响;优化了环氧环己烷合成条件,即以n(t-BuOOH)=0.1mol计,n(C₆H₁₀)∶n(t-BuOOH)=3∶1,溶剂5mL,反应温度80℃,时间60min.在该条件下,环氧环己烷收率(以t-BuOOH计)99.2%以上,质量分数约99.5%(GC检测).催化剂循环使用5次后,未见活性明显下降,环氧环己烷收率(以t-BuOOH计)仍接近99%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.