Assessment of localized artificial diffusivity scheme for large-eddy simulation of compressible turbulent flows

The localized artificial diffusivity method is investigated in the context of large-eddy simulation of compressible turbulent flows. The performance of different artificial bulk viscosity models are evaluated through detailed results from the evolution of decaying compressible isotropic turbulence with eddy shocklets and supersonic turbulent boundary layer. Effects of subgrid-scale (SGS) models and implicit time-integration scheme/time-step size are also investigated within the framework of the numerical scheme used. The use of a shock sensor along with artificial bulk viscosity significantly improves the scheme for simulating turbulent flows involving shocks while retaining the shock-capturing capability. The proposed combination of Ducros-type sensor with a negative dilatation sensor removes unnecessary bulk viscosity within expansion and weakly compressible turbulence regions without shocks and allows it to localize near the shocks. It also eliminates the need for a wall-damping function for the bulk viscosity while simulating wall-bounded turbulent flows. For the numerical schemes used, better results are obtained without adding an explicit SGS model than with SGS model at moderate Reynolds number. Inclusion of a SGS model in addition to the low-pass filtering and artificial bulk viscosity results in additional damping of the resolved turbulence. However, investigations at higher Reynolds numbers suggest the need for an explicit SGS model. The flow statistics obtained using the second-order implicit time-integration scheme with three sub-iterations closely agrees with the explicit scheme if the maximum Courant–Friedrichs–Lewy is kept near unity.     

尺度自适应模拟和大涡模拟的关联性分析

采用理论分析和数值模拟相结合的方法,系统研究了尺度自适应模拟（scale-adaptive simulation,SAS）和大涡模拟（large-eddy simulation,LES）的关联性问题.在理论分析方面,对比分析了系综平均和滤波的定义、Spalart-Allmaras（SA）湍流模型和动态亚格子（subgrid-scale,SGS）模型关于湍流黏性系数的求解方式.理论分析结果表明,系综平均等价于盒式直接滤波,SAS和LES的控制方程在数学形式上具有一致性;SAS存在过多的湍流耗散,主要来自于SA输运方程中的扩散项.在数值模拟方面,选取来流Mach数0.55,Reynolds数2×105的圆柱可压缩绕流为分析算例.计算结果表明,SAS和LES预测的大尺度平均流场信息几乎一致,SAS预测的湍流脉动信息略低于LES.SAS在圆柱近尾迹区的湍流耗散过大,而在稍远的尾迹区几乎能够完全等效于LES.      

Proposed stochastic parameterisations of subgrid turbulence in large eddy simulations of turbulent channel flow

Stochastic and deterministic subgrid parameterisations are developed for the large eddy simulation (LES) of a turbulent channel flow with friction-velocity-based Reynolds number of Re_τ = 950 and centreline-based Reynolds number of Re₀ = 20,580. The subgrid model coefficients (eddy viscosities) are determined from the statistics of truncated reference direct numerical simulations (DNSs). The stochastic subgrid model consists of a mean-field shift, a drain eddy viscosity acting on the resolved field and a stochastic backscatter force of variance proportional to the backscatter eddy viscosity. The deterministic variant consists of a net eddy viscosity acting on the resolved field, which represents the net effect of the drain and backscatter. LES adopting the stochastic and deterministic models is shown to reproduce the time-averaged kinetic energy spectra of the DNS within the resolved scales.     

模型加力燃烧室燃烧流场的并行计算

本文采用基于MPI的并行算法,采用动态内存分配、分区算法和多点重合交错网格系统,在贴体网格下对带V形槽稳定器模型加力燃烧室素流化学反应流场进行数值模拟,湍流模型采用k方程亚网格尺度模型,燃烧模型采用亚网格EBU模型,采用热通量辐射模型估算辐射通量。计算结果表明并行计算对复杂形状的化学反应流动计算效率很高,是模拟大规模的燃烧问题的有力工具。     

A fully discrete,kinetic energy consistent finite-volume scheme for compressible flows

A robust, implicit, low-dissipation method suitable for LES/DNS of compressible turbulent flows is discussed. The scheme is designed such that the discrete flux of kinetic energy and its rate of change are consistent with those predicted by the momentum and continuity equations. The resulting spatial fluxes are similar to those derived using the so-called skew-symmetric formulation of the convective terms. Enforcing consistency for the time derivative results in a novel density weighted Crank–Nicolson type scheme. The method is stable without the addition of any explicit dissipation terms at very high Reynolds numbers for flows without shocks. Shock capturing is achieved by switching on a dissipative flux term which tends to zero in smooth regions of the flow. Numerical examples include a one-dimensional shock tube problem, the Taylor–Green problem, simulations of isotropic turbulence, hypersonic flow over a double-cone geometry, and compressible turbulent channel flow.     

Fractal modelling of turbulent mixing

The aim of this work is to propose a new model for turbulent flows, called the fractal model (FM), applicable both in a Reynolds averaged Navier–Stokes (RANS) and a large-eddy simulation (LES) formulation, with the ultimate goal of applying it to simulate turbulent combustion irrelevant of its mode (premixed or non-premixed). The model is able to turn itself off in the laminar zones of the flow, and in particular near walls. It is based on the fractal theory. It describes the physics of the smaller spatial scales and therefore represents a small-scales model.

FM describes the physics of the small scales of turbulence based on the phenomenological concept of vortex cascade and on the self-similar behaviour of turbulence in the inertial range. Such a model is used in each cell of a numerical calculation. A characteristic length Δ is associated to each cell, and the local energy u ³ _Δ/Δ is distributed over a certain number of eddies, which depends on the local Reynolds number Re _Δ. Each vortex of the cascade generates N _c vortices; the recursive process of vortex generation terminates at the dissipative scale level, i.e. when the eddy Reynolds number is equal to one. FM is also able to estimate the volume fraction occupied by the dissipative fine structures of turbulence; this quantity is critical in reactive turbulent flows.

The physics of small scales is summarized by a turbulent ‘viscosity’ μ_t, to be added to the molecular one. μ_t is zero where the flow is laminar and, in particular, goes to zero at solid walls. Assuming μ_t to be isotropic, FM is applicable in a RANS formulation (IFM, isotropic fractal model). The model can be extended to the anisotropic case (AFM, anisotropic fractal model) and therefore used to close the transport equations in an LES approach. In the present paper, the model (IFM) is used in a RANS approach and is validated through a test case studied experimentally by Johnson and Bennett, and numerically (with LES) by Akselvoll and Moin. The results obtained are in good agreement both with the experimental and the numerical ones. Other tests are being performed.     

On the use of the discontinuous Galerkin method for numerical simulation of two-dimensional compressible turbulence with shocks

In this paper, the discontinuous Galerkin (DG) method combined with localized artificial diffusivity is investigated in the context of numerical simulation of broadband compressible turbulent flows with shocks for under-resolved cases. Firstly, the spectral property of the DG method is analyzed using the approximate dispersion relation (ADR) method and compared with typical finite difference methods, which reveals quantitatively that significantly less grid points can be used with DG for comparable numerical error. Then several typical test cases relevant to problems of compressible turbulence are simulated, including one-dimensional shock/entropy wave interaction, two-dimensional decaying isotropic turbulence, and two-dimensional temporal mixing layers. Numerical results indicate that higher numerical accuracy can be achieved on the same number of degrees of freedom with DG than high order finite difference schemes. Furthermore, shocks are also well captured using the localized artificial diffusivity method. The results in this work can provide useful guidance for further applications of DG to direct and large eddy simulation of compressible turbulent flows.     

Partially premixed flamelet in LES of acetone spray flames

An effective partially premixed flamelet model for large eddy simulation (LES) of turbulent spray combustion is formulated. Different flame regimes are identified with a flame index defined by budget terms in a 2-D multi-phase flamelet formulation, and the application in LES of partially pre-vaporized spray flames shows a favorable agreement with experiments. Simulations demonstrate that, compared to the conventional single-regime flamelets, the present partially premixed flamelet formulation shows its ability in capturing the subgrid regime transitions, yielding a well prediction of peak gas temperature and the downstream flame spreading. A propagating premixed flame front is found coupled with a trailing diffusion burning through the spray evaporation, and the spray effect on regime discrimination is manifested with transport budget analysis. A two-phase regime indicator is then proposed, by which the evaporation-dictated regime is properly described. Its intended use will rely on both gas and spray flamelet structures.     

不同亚格子模式在后台阶湍流流动大涡模拟中的应用

本文用大涡模拟方法研究了湍流后台阶流场中的大涡演变过程,并在此基础上研究了目前大涡模拟中比较常用的六种亚格子模式。在相同的流动几何参数以及计算条件下,给出了不同亚格子模式下湍流流动瞬时压力场以及流场中瞬时粘性大小的分布,尤其给出了流场瞬时演变的大尺度涡结构。将六种亚格子模式从回流区长度、计算时间、计算结果的准确性和流场稳定性等不同角度进行了比较。为选取合适的亚格子模式深入研究湍流耗散机理奠定了基础。     

A new mixed subgrid-scale model for large eddy simulation of turbulent drag-reducing flows of viscoelastic fluids

A mixed subgrid-scale(SGS) model based on coherent structures and temporal approximate deconvolution(MCT) is proposed for turbulent drag-reducing flows of viscoelastic fluids. The main idea of the MCT SGS model is to perform spatial filtering for the momentum equation and temporal filtering for the conformation tensor transport equation of turbulent flow of viscoelastic fluid, respectively. The MCT model is suitable for large eddy simulation(LES) of turbulent dragreducing flows of viscoelastic fluids in engineering applications since the model parameters can be easily obtained. The LES of forced homogeneous isotropic turbulence(FHIT) with polymer additives and turbulent channel flow with surfactant additives based on MCT SGS model shows excellent agreements with direct numerical simulation(DNS) results. Compared with the LES results using the temporal approximate deconvolution model(TADM) for FHIT with polymer additives, this mixed SGS model MCT behaves better, regarding the enhancement of calculating parameters such as the Reynolds number.For scientific and engineering research, turbulent flows at high Reynolds numbers are expected, so the MCT model can be a more suitable model for the LES of turbulent drag-reducing flows of viscoelastic fluid with polymer or surfactant additives.     

On the effect of an anisotropy-resolving subgrid-scale model on large eddy simulation predictions of turbulent open channel flow with wall roughness

A large eddy simulation (LES) was conducted of turbulent flow in a channel with a rough wall on one side and a free surface on the other by adopting an anisotropy-resolving subgrid-scale (SGS) model. A shear Reynolds number of Re_τ = 395 was used based on the mean friction velocity and channel height. To investigate the grid dependency of the LES results caused by the SGS model, three grid resolutions were tested under the same definition of a roughness shape by using the immersed boundary method. The results obtained were compared with direct numerical simulation data with and without the wall roughness and those without the extra anisotropic term. The primary focus was on how the present anisotropic SGS model with coarser grid resolutions can properly provide the effects of roughness on the mean velocity and turbulent stresses, leading to a considerable reduction of the computational cost of LES.     

Large eddy simulation of orientation and rotation of ellipsoidal particles in isotropic turbulent flows

The rotational motion and orientational distribution of ellipsoidal particles in turbulent flows are of significance in environmental and engineering applications. Whereas the translational motion of an ellipsoidal particle is controlled by the turbulent motions at large scales, its rotational motion is determined by the fluid velocity gradient tensor at small scales, which raises a challenge when predicting the rotational dispersion of ellipsoidal particles using large eddy simulation (LES) method due to the lack of subgrid scale (SGS) fluid motions. We report the effects of the SGS fluid motions on the orientational and rotational statistics, such as the alignment between the long axis of ellipsoidal particles and the vorticity, the mean rotational energy at various aspect ratios against those obtained with direct numerical simulation (DNS) and filtered DNS. The performances of a stochastic differential equation (SDE) model for the SGS velocity gradient seen by the particles and the approximate deconvolution method (ADM) for LES are investigated. It is found that the missing SGS fluid motions in LES flow fields have significant effects on the rotational statistics of ellipsoidal particles. Alignment between the particles and the vorticity is weakened; and the rotational energy of the particles is reduced in LES. The SGS-SDE model leads to a large error in predicting the alignment between the particles and the vorticity and over-predicts the rotational energy of rod-like particles. The ADM significantly improves the rotational energy prediction of particles in LES.     

Large-eddy simulation of shock-turbulence interaction in supersonic diffuser flows

LES based on explicit filtering is used to study the shock train phenomenon in turbulent supersonic diffuser flows with circular cross-section and isothermal wall with an incoming pipe flow at friction Reynolds number 245 and centerline Mach number 1.7. Alternate regions of compression and expansion are found in the shock train which is followed by a shock-free ‘mixing’ region as observed in experiments and simulations in the literature. Turbulence amplification and local peaks in pressure-dilatation correlation are observed in the vicinity of the shocks. Low-frequency oscillations of the shock train are also observed.     

Subgrid combustion modeling of 3-D premixed flames in the thin-reaction-zone regime

Large eddy simulation (LES) is used to investigate three-dimensional (3D) lean premixed turbulent methane–air flames in the thin-reaction-zone regime. In this regime, the Kolmogorov scale is smaller than the preheat zone thickness, but larger than the reaction zone thickness. Past numerical studies of similar flames were primarily direct numerical simulation either in two-dimensions or using the artificially thickened flame approach in 3D. For an LES the effect of small (unresolved) scales on the scalar field must be, modeled accurately to capture the correct flame structure. A subgrid combustion model based on the linear-eddy-mixing (LEM) model is used within an LES framework (called LEM–LES hereafter) to capture the 3D flame-structure of the highly stretched premixed flames. A finite-rate, one-step methane–air chemistry with a non-unity Lewis number formulation is used in this study. The simulated flame structure resembles flames experimentally studied in the thin-reaction-zone regime. Even though the preheat zone is broadened by the penetration of small eddies, the chemical reaction zone remains thin and localized. This feature is captured properly in the current LEM–LES approach. The flame structure and other statistics such as the flame area evolution, curvature, and strain-rate statistics computed using the LEM–LES are also in good agreement with the past DNS studies.     

Finite element form of FDV for widely varying flowfields

We present the Flowfield Dependent Variation (FDV) method for physical applications that have widely varying spatial and temporal scales. Our motivation is to develop a versatile numerical method that is accurate and stable in simulations with complex geometries and with wide variations in space and time scales. The use of a finite element formulation adds capabilities such as flexible grid geometries and exact enforcement of Neumann boundary conditions. While finite element schemes are used extensively by researchers solving computational fluid dynamics in many engineering fields, their use in space physics, astrophysical fluids and laboratory magnetohydrodynamic simulations with shocks has been predominantly overlooked. The FDV method is unique in that numerical diffusion is derived from physical parameters rather than traditional artificial viscosity methods. Numerical instabilities account for most of the difficulties when capturing shocks in these regimes. The first part of this paper concentrates on the presentation of our numerical method formulation for Newtonian and relativistic hydrodynamics. In the second part we present several standard simulation examples that test the method’s limitations and verify the FDV method. We show that our finite element formulation is stable and accurate for a range of both Mach numbers and Lorentz factors in one-dimensional test problems. We also present the converging/diverging nozzle which contains both incompressible and compressible flow in the flowfield over a range of subsonic and supersonic regions. We demonstrate the stability of our method and the accuracy by comparison with the results of other methods including the finite difference Total Variation Diminishing method. We explore the use of FDV for both non-relativistic and relativistic fluids (hydrodynamics) with strong shocks in order to establish the effectiveness in future applications of this method in astrophysical and laboratory plasma environments.     

Impact of subgrid fluid turbulence on inertial particles subject to gravity

Two-phase turbulent flows with the dispersed phase in the form of small, spherical particles are increasingly often computed with the large-eddy simulation (LES) of the carrier fluid phase, coupled to the Lagrangian tracking of particles. To enable further model development for LES with inertial particles subject to gravity, we consider direct numerical simulations of homogeneous isotropic turbulence with a large-scale forcing. Simulation results, both without filtering and in the a priori LES setting, are reported and discussed. A full (i.e. a posteriori) LES is also performed with the spectral eddy viscosity. Effects of gravity on the dispersed phase include changes in the average settling velocity due to preferential sweeping, impact on the radial distribution function and radial relative velocity, as well as direction-dependent modification of the particle velocity variance. The filtering of the fluid velocity, performed in spectral space, is shown to have a non-trivial impact on these quantities.     

Large-eddy simulation of MILD combustion using partially stirred reactor approach

Subgrid-scale (SGS) parameterization and method for calculating filtered reaction rate are critical components of an accurate large-eddy simulation (LES) of turbulent flames. In this study, we integrate gradient-type structural SGS models with a partially stirred reactor approach by using detailed chemical kinetics to simulate a turbulent methane/hydrogen jet flame under moderate or intense low-oxygen dilution (MILD) conditions. The study examines two oxygen dilution levels. The framework is assessed through a systematic and comprehensive comparison of temperature, and mass fractions of major and minor species with experimental data and other reference simulation results. Overall, the statistics of the combustion field show excellent agreement with measurements at different axial locations, and a significant improvement compared to some previous simulations. It suggests that the proposed nonlinear LES framework is able to accurately model MILD combustion with reasonable computational cost.     

Burst detection in turbulent channel flows based on large eddy simulation databases

As one of the important coherent structures in the near-wall region, turbulent burst is responsible for the production and transport of major turbulent kinetic energy and Rey- nolds stress[1]. Nearly half of turbulent kinetic energy or Reynolds stress is produced in the near-wall region, and 80% flows in outer region only contribute 20% of them. Both ejection and sweeping events contribute 60―70% of the turbulent shear stress respec- tively[2]. Recently, turbulent burst process has been foun…