以发光二极管为光源的毛细管电泳芯片-光纤耦合荧光检测微流控分析系统

自行设计组装了简单小型化的芯片毛细管电泳-光纤耦合激光诱导荧光检测系统。以蓝色发光二极管为光源,借助光纤来传导激发光,并通过在芯片上加工与分离通道相垂直的光纤定位通道,实现了激发光在芯片上检测点的准确定位。当光纤定位通道末端与分离通道之间的距离为190μm时,激发光在检测点的光斑直径测定值仅为185μm。以荧光素为标准样品考察了该检测系统的各性能参数,连续5次进样,电泳分离的峰面积标准偏差(RSDs)为6.8%,荧光素的检出限为6μmol/L。说明该检测系统具有低噪音和重现性好等优点。利用该检测系统,快速分离了异硫氰酸荧光素标记的儿茶酚胺样品。     

小型可连续进样微流控芯片分析的研制

报道了一种结构简单、可连续进样的小型控芯片分析仪的研制.顺序注射分析系统通过芯片上制作的接口将试样连续引入芯片,并采用自行设计的紧凑型光纤式激光诱导荧光检测器进行检测.该仪器用于芯片毛细管电泳分离实验室合成Cy5荧光染料,实现了连续进样和换样.峰高RSD为1.9%(n=11),试样通量35/h;相邻试样携出＜4%.     

小型可连续进样微流控芯片分析仪的研制

报道了一种结构简单、可连续进样的小型微流控芯片分析仪的研制。顺序注射分析系统通过芯片上制作的接口将试样连续引入芯片 ,并采用自行设计的紧凑型光纤式激光诱导荧光检测器进行检测。该仪器用于芯片毛细管电泳分离实验室合成Cy5荧光染料 ,实现了连续进样和换样。峰高RSD为 1 .9% (n=1 1 ) ,试样通量 3 5 h ;相邻试样携出 <4%。     

芯片毛细管电泳-激光诱导荧光-电荷耦合器件检测系统

采用自组建的芯片毛细管电泳－激光诱导荧光－电荷耦合器件（CCD）检测系统在数十秒内满意地分离了曙红和荧光素。设计了一种进样、分 离电路,可以有效地消除进样通道的样品溶液向分离通道的渗漏。解决了由这种渗漏所引起的电泳峰变宽、拖尾等问题。提高了芯片毛细管电泳的分辨率和分离效率。     

通用型激光诱导荧光微流控芯片分析仪的研制与性能考察

设计和研制了一种通用型激光诱导荧光微流控芯片分析仪.检测部分按共聚焦检测原理设计,采用CCD(电荷耦合器件)监测通道,三维自动调节聚焦,发射波长滤光片可方便地更换以适应多种染料选择,能分别显示进样和分离通道2条电流-时间曲线.考察了该分析仪的检测灵敏度、检测极限和线性范围,显示了分析灵敏度高,检测限低和线性范围宽等特点,在自制注塑型PMMA塑料芯片上实现了φX174Haedi-gesT_dNA片段的分离测定和烟叶act基因PCR产物的分析     

电泳芯片的制作及其进样与分离

利用微细加工技术研究在玻璃上制作电泳芯片的方法,测试了微管道的伏安特性曲线。在该电泳芯片上进行了注样和分离实验,采用激光诱导荧光法进行检测,利用CCD拍摄了进样和分离的全过程。分析了电泳芯片上施加不同的电压对样品注样的影响,给出了FITC－OH和FITC－Arg分离谱图。     

集成毛细管电泳芯片系统的制作、测试及应用

使用标准光刻和化学湿法腐蚀技术,在玻璃板材上制作了由样样管道和分离管道内构成的集成毛细管网路系统,对影响芯片质量的一些因素进行了讨论,并进行了性能测试和评价。芯片上毛细管道散热良好。使用激光诱导荧光和CCD成像检测系统,以电渗作用为驱动力,对混合样品进行了进样、快速分离（20s以内）和监测,证明了自制集成毛细管电泳芯片及检测系统的可行性。比较了两种注样方式（float和pinched)的不同;证明了在分离时可以优化加电策略,防止拖尾,改善峰形。     

一种微流控芯片激光诱导荧光检测器的研制及应用

研制了一台正交结构的微流控芯片激光诱导荧光检测器.将较宽的芯片架固定在1个三维操作平台上,可用于检测点的调节和激光光斑校准微调.不同发射波长的半导体激光器以及不同波长的窄带滤光片均可方便更换,以满足不同品种的分析要求.该检测器结构简单、体积小和操作灵活方便,对微流控芯片的尺寸及通道结构适应性强.能在一定程度上满足多种芯片的应用研究需要.     

顺序注射-液芯波导-激光诱导荧光微流控电泳系统分析脱氧核糖核酸

报道了一种基于液芯波导的小型激光诱导荧光微流控分析系统及其在分离检测DNA样品中的应用。使用6 cm长Teflon AF涂覆的石英毛细管作为液芯波导管,同时作为电泳分离通道和荧光检测光路,将分离后样品的荧光信号传送到检测器。半导体激光器(LD)作为激发光源,产生的荧光信号在波导管出口收集。设计了一种特殊的出口储液池,直接使用滤光片作为液池的后壁并置于光电倍增管(PMT)窗口处,从而使全部检测系统仅由LD、LCW、滤光片和PMT四部件组成,达到了结构最简化。使用顺序注射(SI)系统实现了自动样品更新,该系统通过一种改进结构的可消除气泡的接口与微流控系统联接。采用这种联用系统实现了溴化乙锭(EB)标记的X174-HaeⅢ裂解液中11个脱氧核糖核酸片段的分离和聚合酶链反应扩增样品的检测。     

微流控玻璃芯片毛细管电泳鞘流型紫外光度检测系统

目前,微流控芯片分析系统中常用的检测方法有激光诱导荧光检测、质谱、化学发光、电化学和光度法等.其中应用最多的是激光诱导荧光检测器,但其所测样品大部分需要衍生.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.