Ultraviolet Spectrophotometric Determination of Primary Amine-Containing Drugs via Their Charge-Transfer Complexes with Tetracyanoethylene

A spectrophotometric method is described for the quantitative determination of some drugs containing a primary amino-group, i.e. amantadine hydrochloride, tranylcypromine sulfate and tranexamic acid in their pure forms as well as in some pharmaceutical dosage forms. The procedure is based on the formation of a charge-transfer complex between tetracyanoethylene (TCNE) as -acceptor and the studied drugs as n-donors in the presence of acetonitrile as solvent. The spectra of the complexes show maxima at 330nm with high apparent molar absorptivities (from 2.1 × 10³ to 2.2 × 10⁴ L·mol^–1 cm^–1). Beers law is obeyed in the concentration ranges of 25–75 µg mL^–1, 2–30µgmL^–1 and 5–25µg mL^–1, and the mean percent recoveries are 99.68±0.92, 100.3±0.75 and 99.8±0.76 for amantadine hydrochloride, tranylcypromine sulfate and tranexamic acid, respectively. The proposed method is simple and can be applied to determine these drugs in their pharmaceutical dosage forms. The results compare favorably with those of reported methods.     

Solvent effect and temperature dependence in the interaction of singlet oxygen with α-phenyl-N-tert-butyl nitrone

The solvent effect on the quenching of singlet oxygen by -phenyl-N-tert-butyl-nitrone /PBN/ has been investigated by laser flash photolysis technique registrating luminescence kinetics of¹O₂. The values of the rate constant /k_q/ of the quenching were at 293 K: /9.0±0.4/×10⁶, /4.4±0.3/×10⁶ and /18.3±0.5/×10^{6 –}M^–1 s^–1 in toluene, chloroform and acetonitrile, respectively. The rate constant for the chemical interaction between¹O₂ and PBN, was k_r<1×10⁵ M^–1 s^–1k_q independently of the solvent. At temperatures between 223 and 293 K in toluene E_q=0.4±0.4 kJ mol^–1.     

Adsorptive stripping voltammetry of selected cephalosporin antibiotics and their direct determination in urine

Accumulation of selected cephalosporin antibiotics cefazolin, cefotaxime, cefuroxime and ceftriaxone on hanging mercury drop electrode was studied. The effects of supporting electrolyte composition, pH, accumulation potential and time were examined and corresponding analytical parameters were established employing linear sweep (staircase) or differential pulse voltammetric detection. Britton-Robinson buffer of pH 4.0 for ceftriaxone and acetate buffer in the pH range 3.6–5.0 for the other three compounds were found to be the best media. Calibration curves were linear from micromolar down to nanomolar range with limits of detection 2 × 10^–9 moll^–1, 1 × 10^–9 moll^–1, 5 × 10^–10 moll^–1 and 5 × 10^–9 moll^–1 for cefazolin, cefotaxime, cefuroxime and ceftriaxone respectively, applying the accumulation times of 5 to 14 min. Direct and simple determination of cefazolin as a model compound in urine was established with no other manipulation of urine sample than dilution 1 + 500 with buffer and subsequent adsorptive stripping voltammetric determination. The detection limit of the method is 7 gml^–1 (1.5 × 10^–5 moll^–1) of cefazolin in urine, and the relative standard deviation of 9 measurements was found to be 2.8% at 23 gml^–1 of cefazolin in urine. Similar values were found for other three compounds as well. These values are comparable or even better than those obtained by high performance liquid Chromatographic methods and approve the suitability of the proposed method for urine level monitoring in clinical practice and pharmacological studies.     

Aquation of α-cis-chloroaquoethylenediamine-N,N'-diacetatocobalt(III) in aqueous and in mixed solvents: A mechanistic study

Summary The displacement of chloride ligands from -cis-chloro-aquoethylenediamine-N,N-diacetatocobalt(III) in nonacidic aqueous solutions was followed conductimetrically at 30–45° and the products of aquation were characterised by conductance, spectral and ion-exchange techniques. The rate constants for aquation in aqueous media and in 1 : 4 v : v mixed solvents at 25° are: 4.0 × 10^–5 s^–1 in H₂O, 2.71 × 10^–5 s^–1 in MeOH : H₂O, 2.74 × 10^–5 s^–1 in EtOH: H₂,O and 2.58 × 10^–5 s^–1 n in Me₂CO : H₂O. The corresponding H&#x002A; and S&#x002A; values have also been evaluated. Solvent polarity has a marked influence on the rate of chloride ion release. The aquation rate constants and the activation parameters have been correlated with solvent parameters,e.g. D, Y-values, Dimroth's E_T and Kosower's Z-values and, based on these correlations, a dissociative interchange (I_d) mechanism is proposed rather than dissociative as observed for some other cobalt(III) complexes.Senior author.     

Reactions of superoxide anion radical with antioxidants and their use in voltammetry

Kinetic parameters were calculated for the electrochemical reduction of oxygen at a glassy-carbon electrode with the generation of superoxide radical anions in a 0.05 M solution of (C₂H₅)₄NI in dimethylformamide in the presence of fat-soluble antioxidants, retinol and -tocopherol. A procedure based on the protonation of the radical anion with antioxidant molecules is proposed for the voltammetric determination of antioxidants to determine milligram amounts of retinol and -tocopherol in model solutions (RSD = 1–2%). The calibration graphs for retinol and -tocopherol are linear in the concentration ranges 9.7 × 10^–5–2.3 × 10^–3 and 6.2 × 10^–4–3.1 × 10^–3 M, respectively. The detection limits for retinol and -tocopherol are 4.8 × 10^–5 and 4.1 × 10 ^–4 M, respectively. The procedure was applied to the determination of the active component (retinol and -tocopherol) in pharmaceuticals.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 1, 2005, pp. 56–59.Original Russian Text Copyright © 2005 by Ziyatdinova, Gilmetdinova, Budnikov.     

Indikation der Sulfat-F?llungstitration mit adsorptionspolarisierten Elektroden

Summary The indication of the sulphate precipitation-titration using adsorption-polarized electrodes (APE) has been maximized. Large differences in quality of the two electrode surfaces produce broad signals. Suitable preparation of the electrode leads to less defective surfaces. Sharp signals result when the platinum black is electrodeposited at 1.4 V followed by oxidation under the same conditions. Addition of lead-, copper- and mercury-salts to the plating solution increases the surface of the deposits, whereas deposits containing Fe are smoother and lead to sharp peaks.Adsorption as well as coprecipitation of oxoanions cause interference. SeO ₄ ^2– and VO ₃ ^– does not interfere with the determination up to a molar ratio of sulphate to oxoanion of 7.51 and 51 resp., whereas a molar ratio up to 25:1 of CrO ₄ ^2– , MoO ₄ ^2– , WO ₄ ^2– and AsO ₃ sulphate can be tolerated. The influence of IOO ₄ ^2– is negligible. Furthermore, the determination of MoO ₄ ^2– and WO ₄ ^2– was found to be possible by titration using APE-indication.     

Kinetics and mechanism of the acid-catalyzed hydrolysis of [carbonatoethylenediamine(L)2cobalt(III)]+ ions

The kinetics of acid-catalyzed hydrolysis of the [Co(en)(L)₂(O₂CO)]⁺ ion (L = imidazole, 1-methylimidazole, 2-methylimidazole) follows the rate law –d[complex]/dt = {k ₁ K[H⁺]/(1 + K[H⁺])}[complex] (15–30 or 25–40 °C, [H⁺] = 0.1–1.0 M and I = 1.0 M (NaClO₄)). The reaction course consists of a rapid pre-equilibrium protonation, followed by a rate determining chelate ring opening process and subsequent fast release of the one-end bound carbonato ligand. Kinetic parameters, k ₁ and K, at 25 °C are 5.5 × 10^–2 s^–1, 0.44 M^–1 (ImH), 5.1 × 10^–2 s^–1, 0.54 M^–1 (1-Meim) and 3.8 × 10^–3 s^–1, 0.74 M^–1 (2-MeimH) respectively, and activation parameters for k ₁ are H₁ = 43.7 ± 8.9 kJ mol^–1, S₁ = –123 ± 30 J mol^–1 deg^–1 (ImH), H₁ = 43.1 ± 0.3 kJ mol^–1, S₁ = –125 ± 1 J mol^–1 deg^–1 (1-Meim) and H₁ = 64.2 ± 4.3 kJ mol^–1, S₁ = –77 ± 14 J mol^–1 deg^–1 (2-MeimH). The results are compared with those for similar cobalt(III) complexes.     

Microdialysis sampling and high-performance liquid chromatography with chemiluminescence detection for in-vivo on-line determination and study of the pharmacokinetics of levodopa in blood

A simple, reliable, and reproducible method for in-vivo on-line separation and determination of levodopa has been based on microdialysis then high-performance liquid chromatography with chemiluminescence detection. The perfusate is perfused at a flow rate of 5 L min^–1. The concentration of levodopa in the dialysate is determined on line with a chemiluminescence system. The dialysate sample volume is approximately 20 L. The response of the system is linearly related to the concentration of levodopa in the range 1×10^–8 to 1×10^–6 g mL^–1 (r²=0.9995) with a detection limit (3) of 3×10^–9 g mL^–1 and sample throughput of 12 h^–1; RSD is 2.8% (n=11). The method has been successfully used to study the pharmacokinetics of levodopa in vivo; the values of the pharmacokinetics parameters C_max, AUC_0–t and T_max were 16.60, 20.92 ng mL^–1, and 90 min, respectively.     

Electrical properties of poly(bis(β-phenoxyethoxy)phosphazene) and its complexes

Electrical and dielectrical properties of poly(bis(-phenoxyethoxy)phosphazene) (I) and its complexes with various content ratios of AgSO₃CF₃ to monomeric unit (0.25/1 (II) and 0.5/1 (III) in molar ratio) were investigated.Dc conductivity of respective samples at 18 °C were 6.1×10^–12, 4.4×10^–9, and 7.1×10^–8 S/m.Dc conduction was considered to be due to ion hopping. Charge mobility ranged from 3×10^–12 to 6× 10^–11 m²/Vs depending on the applied field in sample II. In sample I, a tan peak was found which can be ascribed to molecular relaxation of main chains. The peak vanished upon introducing AgSO₃ CF₃. Temperature dependence of total conductivity ( _T ) measured byac method in the temperature range between –150 °C and 50 °C showed several peaks at the temperatures corresponding to the peak temperatures of tan. Total conductivities of respective samples at 100 kHz were 4.9×10^–7 (69 °C), 1.7×10^–4 (45 °C), and 1.5×10^–4(40°C)S/m.     

Preparation and electrical conductivity of organoheterobimetallic-maleonitriledithiolates

The new complexes [PhHg]₂[M(mnt)₂] [M = Ni^II, Cu^II, Zn^II or Pd^II; mnt^2– = 1,2-dicyano-1,2-ethylenedithiolate (maleonitriledithiolate)] have been characterized spectroscopically and magnetically and their solid phase conductivity measured. All compounds exhibit solid phase _rt in the 1.29 × 10^–12–5.68 × 10^–10 S cm^–1 range and semiconduct in the 313–383 K range.     

Alternative spectrophotometric determination of niobium and tantalum with o-hydroxyhydroquinonephthalein in cationic surfactant micellar media

Summary The alternative and simultaneous spectrophotometric determination of niobium and tantalum was examined by using the colour development between o-hydroxyhydroquinonephthalein (Qnph) and niobium or tantalum in the presence of hexadecyltrimethylammonium chloride (HTAC) in strong acidic media. Beer's law was obeyed up to 10.0 g of niobium and up to 18.0 g of tantalum in a final volume of 10.0 ml. The apparent molar absorption coefficients for niobium and tantalum were 2.18×10⁵ and 2.09×10⁵ l mol^–1 cm^–1 with Sandell's sensitivities of 0.00042 g/cm² niobium at 520 nm and 0.00085 g/cm² tantalum at 510 nm, respectively. The alternative assay of niobium and tantalum was possible by using two methods: Method A — masking method with oxalic acid, Method B — acid adjusting-method using 50% sulfuric acid. These methods were 2–6-times more sensitive than other methods.Application of xanthene derivatives in analytical chemistry. Part XC. Part LXXXIX see ref [1]     

Method for Screening and Quantification of Seven Phenothiazines in Whole Blood Samples by Non-Aqueous Capillary Electrophoresis

Seven phenothiazine derivatives (PHE) group were studied using non-aqueous capillary electrophoresis (NACE). The screening and quantification method for these drugs in blood was presented. Then the optimal medium for dissolution of the examined blood extracts was tested for. The precision of identification and quantification parameters comprised the ranges from 0.29 to 1.38 and from 1.21 to 9.15 % RSD, correspondingly. The detection limits were 0.08 for promazine and 0.15 g mL^–1 for the rest of drugs tested. The correlation coefficient of the method linearity was studied over the concentration range of 0.25–4.00 g mL^–1 and was higher than 0.996. Finally the proposed method was applied to two forensic blood samples and concentrations of the examined phenothiazines determined by HPLC and NACE methods were found to be comparable.     

Spectrophotometric determination of ciprofloxacin in pure form and in tablets through charge-transfer complexation reactions

Three simple, quick and sensitive spectrophotometric methods are described for the determination of ciprofloxacin. The methods are based on the reaction of this drug as ann-electron donor with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), 7,7,8,8,-tetracyanoquinodimethane (TCNQ) andp-chloranil (CL) as -acceptors to give highly coloured complex species. The coloured products are quantitated spectrophotometrically at 460, 843 and 550 nm for DDQ, TCNQ and CL, respectively. Optimization of the different experimental conditions is described. Beer's law is obeyed in the concentration ranges 5–50, 1.5–15 and 20–200 g ml^–1 ciprofloxacin, but the concentration ranges for best accuracy are 10–48, 2.5–15 and 35– 195 g ml^–1 of drug for DDQ, TCNQ and CL, respectively. The relative standard deviations are less than 1.5%. Applications of the suggested methods to ciprofloxacin tablets are presented and compared with the USP method. The stability constants of the 11 DDQ and CL complexes were 1.086 × 10⁴ and 2.581 × 10⁴ lmol^–1, respectively, whereas for the 12 TCNQ complex it was 3.62 × 10⁸1. mol^–1.     

Taylor dispersion measurements at low electrolyte concentrations. I. Tetraalkylammonium perchlorate aqueous solutions

An equipment for the determination of mutual diffusion coefficients using the Taylor's dispersion technique is described. The radius of the capillary was determined with the help of various calibration methods. Diffusion coefficients of aqueous tetraalkylammonium perchlorates, Me₄NClO₄, and Et₄NClO₄, were measured at 25°C in the concentration range 10^–3 to 5×10^–2 mol-dm^–3, and the slightly soluble Pr₄NClO₄ up to 1×10^–2 mol-dm^–3. The slope of linear plots ofD vs. is in agreement with theory, in contrast to the limiting valuesD ₀, which all deviate by about –5% from the Nernst-Hartley values.     

Adsorptive stripping voltammetric determination of 1-(4′-bromophenyl)-3,3-dimethyltriazene

The optimum conditions were established for the determination of the genotoxic substance 1-(4-bromophenyl)-3,3-dimethyltriazene by differential-pulse voltammetry at a hanging mercury drop electrode in the concentration range 1 × 10^–4 to 1 × 10^–7 mol dm^–3. The sensitivity of the determination can be improved through adsorptive accumulation of the investigated substance on the surface of the hanging mercury drop electrode: differential pulse adsorptive stripping voltammetry can be used in the concentration range 1 × 10^–7 to 2 × 10^–10 mol dm^–3. The relative standard deviation (for ten determinations at 2 × 10^–10 mol dm^–3) was 7.5%.     

Application of promethazine hydrochloride as a chromogenic reagent for the spectrophotometric determination of certain sulphonamide drugs

Summary The oxidative coupling reaction of promethazine · HCl with primary aromatic amines was applied to the determination of seven pharmaceutical sulphonamides. A mixture of an acidic solution (3.5% acetic acid) of the sulphonamide and the chromogenic reagent was treated with hypochloriteion. The wavelength of maximum absorption is 610 nm, the molar absorptivities range from 1.57×10⁴ to 1.89×10⁴ l mole^–1 cm^–1 and Sandell sensitivities range from 0.00972 to 0.0136 g cm^–2. A linear correlation was found between absorbance at max and concentration. The procedures developed for bulk sulpha drugs and some of their pharmaceutical preparations are rapid, accurate, precise and comparable to the Bratton-Marshall procedure.     

On the mechanism of racemisation of dichlorobis(ethylenediamine)-metal chlorides [metal = cobalt(III) or chromium(III)] in the solid state

Summary In the solid state l-cis-[M(en)₂Cl₂]Cl [M=cobalt(III) or chromium(III)] undergoes thermal racemisation smoothly at 158 °C without anycis-trans interconversion. The values of k_rac, H and S are 6 × 10^–6s^–1, 218 kJM^–1 and 156.1 JK^–1M^–1 for the cobalt(III) complex and 3.5 × 10^–5s^–1, 229.7 kJM^–1 and 197.9 JK^–1M^–1 for the chromium(III) complex, respectively. The results are only in accord with a rhombic twist mechanism of the type originally proposed by Ray and Dutt for [M(AA)₃] complexes.     

A di-μ-oxomolybdenum(V) complex of 6-acetonylisoxanthopterin,undergoing oxygen atom transfer with dimethyl sulphoxide

The new compound, Na[(Mo₂ ^VO₄)(pte)(OMe)(MeOH)₂] (pte = anion of 6-acetonylisoxanthopterin), has been prepared using the redox non-innocent title ligand in MeOH–H₂O, and characterized by elemental analysis and physico-chemical methods including e.s.m.s., i.r., u.v.–vis. and ¹H-n.m.r. spectra. Rate constants data (1.4 × 10^–3 s^–1 at 300 K) for its oxygen atom transfer with dimethyl sulphoxide tally with those of synthetic analogue systems reported earlier by different authors. The negative activation entropy (–206.3 J mol^–1 deg^–1) is consistent with an associative mechanism for this reaction.     

Kinetics and mechanism of the copper(II) promoted hydrolysis of the methyl ester of ethylenediaminemonoacetate

Summary Base hydrolysis of methyl ethylenediaminemonoacetate has been studied at I=0.1 mol dm^–3 (NaClO₄) over the pH range 7.4–8.8 at 25 °C. The proton equilibria of the ligand can be represented by the equations, where E is the free unprotonated ester species. Values of pK₁ and pK₂ are 4.69 andca. 7.5 at 25° (I=0.1 mol dm^–3). For base hydrolysis of EH⁺, k_OH=1.1×10³ dm³ mol^–1 s^–1 at 25 °C. The species E is shown to undergo lactamisation to give 2-oxopiperazine (k_lact ca. 1×10^–3 s^–1) at 25 °C. Formation of the lactam is indicated both by u.v. measurements and by isolation and characterisation of the compound.Base hydrolysis of the ester ligand in the complex [CuE]²⁺ has been studied over a range of pH and temperature, k _OH ²⁵ =9.3×10⁴ dm³ mol^–1 s^–1 with H=107 kJ mol^–1 and S ₂₉₈ =209 JK^–1 mol^–1. Base hydrolysis of [CuE]²⁺ is estimated to be some 10⁵5 fold faster than that of the free ester ligand. The results suggest that base hydrolysis occursvia a chelate ester species in which the methoxycarbonyl group of the ligand is bonded to copper(II).     

Synthesis,Structure, and Conduction of Trisubstituted Cesium and Rubidium Salts of Trimesic Acid

Salts of trimesic (1,3,5-benzenetricarboxylic) acid generally formulated as ₃[C₆H₃(COO)₃] · 5H₂O, where Me = Rb and Cs, are synthesized and their structure and conductivity are examined. Both salts are ionic conductors with conductivities of 4.6 × 10^–7 and 2.2 × 10^{–9 –1} cm^–1 at 298 K and activation energies of conduction equal to (1.09 ± 0.02) and (1.07 ± 0.01) eV, respectively.