Synthetic analogue of the [Fe(2)(mu-OH)(2)(mu-O(2)CR)](3+) core of soluble methane monooxygenase hydroxylase via synthesis and dioxygen reactivity of carboxylate-bridged diiron(II) complexes

We describe the synthesis and dioxygen reactivity of diiron(II) tetracarboxylate complexes [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(N,N-Me(2)en)(2)] (2) and [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(N,N-Bn(2)en)(2)] (6), where Ar(Tol)CO(2)(-) = 2,6-di(p-tolyl)benzoate. These complexes were prepared as models for the diiron(II) center in the hydroxylase component of soluble methane monooxygenase (MMOH). Compound 6 reacts with dioxygen to afford PhCHO in approximately 60(5)% yield, following oxidative N-dealkylation of the pendant benzyl group on the diamine ligand. The diiron(III) complex [Fe(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(O(2)CAr(Tol))(3)(N-Bnen)(N,N-Bn(2)en)] (8) was isolated from the reaction mixture. The 4.2 K M?ssbauer spectrum of 8 displays a single quadrupole doublet with parameters delta = 0.48(2) mm s(-1) and Delta E(Q) = 0.61(2) mm s(-1). The [Fe(2)(mu-OH)(2)(mu-O(2)CR)](3+) core structure in 8 matches that of the fully oxidized form of MMOH. The conversion of 6 to 8 closely parallels the chemistry of MMOH in which an O(2)-derived oxygen atom is inserted into the C-H bond of methane. Several reaction pathways are considered to account for this novel chemical transformation, and these are compared with mechanistic frameworks previously developed for related cytochrome P450 and copper(I) dioxygen chemistry.     

Dioxygen-initiated oxidation of heteroatomic substrates incorporated into ancillary pyridine ligands of carboxylate-rich diiron(II) complexes

Progress toward the development of functional models of the carboxylate-bridged diiron active site in soluble methane monooxygenase is described in which potential substrates are introduced as substituents on bound pyridine ligands. Pyridine ligands incorporating a thiol, sulfide, sulfoxide, or phosphine moiety were allowed to react with the preassembled diiron(II) complex [Fe(2)(mu-O(2)CAr(R))(2)(O(2)CAr(R))(2)(THF)(2)], where (-)O(2)CAr(R) is a sterically hindered 2,6-di(p-tolyl)- or 2,6-di(p-fluorophenyl)benzoate (R = Tol or 4-FPh). The resulting diiron(II) complexes were characterized crystallographically. Triply and doubly bridged compounds [Fe(2)(mu-O(2)CAr(Tol))(3)(O(2)CAr(Tol))(2-MeSpy)] (4) and [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-MeS(O)py)(2)] (5) resulted when 2-methylthiopyridine (2-MeSpy) and 2-pyridylmethylsulfoxide (2-MeS(O)py), respectively, were employed. Another triply bridged diiron(II) complex, [Fe(2)(mu-O(2)CAr(4)(-)(FPh))(3)-(O(2)CAr(4)(-)(FPh))(2-Ph(2)Ppy)] (3), was obtained containing 2-diphenylphosphinopyridine (2-Ph(2)Ppy). The use of 2-mercaptopyridine (2-HSpy) produced the mononuclear complex [Fe(O(2)CAr(Tol))(2)(2-HSpy)(2)] (6a). Together with that of previously reported [Fe(2)(mu-O(2)CAr(Tol))(3)(O(2)CAr(Tol))(2-PhSpy)] (2) and [Fe(2)(mu-O(2)CAr(Tol))(3)(O(2)CAr(Tol))(2-Ph(2)Ppy)] (1), the dioxygen reactivity of these iron(II) complexes was investigated. A dioxygen-dependent intermediate (6b) formed upon exposure of 6a to O(2), the electronic structure of which was probed by various spectroscopic methods. Exposure of 4 and 5 to dioxygen revealed both sulfide and sulfoxide oxidation. Oxidation of 3 in CH(2)Cl(2) yields [Fe(2)(mu-OH)(2)(mu-O(2)CAr(4)(-)(FPh))(O(2)CAr(4)(-FPh))(3)(OH(2))(2-Ph(2)P(O)py)] (8), which contains the biologically relevant {Fe(2)(mu-OH)(2)(mu-O(2)CR)}(3+) core. This reaction is sensitive to the choice of carboxylate ligands, however, since the p-tolyl analogue 1 yielded a hexanuclear species, 7, upon oxidation.     

Modeling dioxygen-activating centers in non-heme diiron enzymes: carboxylate shifts in diiron(II) complexes supported by sterically hindered carboxylate ligands

General synthetic routes are described for a series of diiron(II) complexes supported by sterically demanding carboxylate ligands 2,6-di(p-tolyl)benzoate (Ar(Tol)CO(2)(-)) and 2,6-di(4-fluorophenyl)benzoate (Ar(4-FPh)CO(2)(-)). The interlocking nature of the m-terphenyl units in self-assembled [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (L = C(5)H(5)N (4); 1-MeIm (5)) promotes the formation of coordination geometries analogous to those of the non-heme diiron cores in the enzymes RNR-R2 and Delta 9D. Magnetic susceptibility and M?ssbauer studies of 4 and 5 revealed properties consistent with weak antiferromagnetic coupling between the high-spin iron(II) centers. Structural studies of several derivatives obtained by ligand substitution reactions demonstrated that the [Fe(2)(O(2)CAr')(4)L(2)] (Ar' = Ar(Tol); Ar(4-FPh)) module is geometrically flexible. Details of ligand migration within the tetracarboxylate diiron core, facilitated by carboxylate shifts, were probed by solution variable-temperature (19)F NMR spectroscopic studies of [Fe(2)(mu-O(2)CAr(4-FPh))(2)-(O(2)CAr(4-FPh))(2)(THF)(2)] (8) and [Fe(2)(mu-O(2)CAr(4-FPh))(4)(4-(t)BuC(5)H(4)N)(2)] (12). Dynamic motion in the primary coordination sphere controls the positioning of open sites and regulates the access of exogenous ligands, processes that also occur in non-heme diiron enzymes during catalysis.     

Synthesis, characterization, and preliminary oxygenation studies of benzyl- and ethyl-substituted pyridine ligands of carboxylate-rich diiron(II) complexes

In this study benzyl and ethyl groups were appended to pyridine and aniline ancillary ligands in diiron(II) complexes of the type [Fe(2)(mu-O(2)CAr(R))(2)(O(2)CAr(R))(2)(L)(2)], where (-)O(2)CAr(R) is a sterically hindered terphenyl carboxylate, 2,6-di(p-tolyl)- or 2,6-di(p-fluorophenyl)benzoate (R = Tol or 4-FPh, respectively). These crystallographically characterized compounds were prepared as analogues of the diiron(II) center in the hydroxylase component of soluble methane monooxygenase (MMOH). The use of 2-benzylpyridine (2-Bnpy) yielded doubly bridged [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-Bnpy)(2)] (1) and [Fe(2)(mu-O(2)CAr(4)(-)(FPh))(2)(O(2)CAr(4)(-)(FPh))(2)(2-Bnpy)(2)] (4), whereas tetra-bridged [Fe(2)(mu-O(2)CAr(Tol))(4)(4-Bnpy)(2)] (3) resulted when 4-benzylpyridine (4-Bnpy) was employed. Similarly, 2-(4-chlorobenzyl)pyridine (2-(4-ClBn)py) and 2-benzylaniline (2-Bnan) were employed as N-donor ligands to prepare [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-(4-ClBn)py)(2)] (2) and [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-Bnan)(2)] (5). The placement of the substituent on the pyridine ring had no effect on the geometry of the diiron(II) compounds isolated when 2-, 3-, or 4-ethylpyridine (2-, 3-, or 4-Etpy) was introduced as the ancillary nitrogen ligand. The isolated [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-Etpy)] (6), [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(3-Etpy)] (7), [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(4-Etpy)] (8), and [Fe(2)(mu-O(2)CAr(4)(-FPh))(2)(O(2)CAr(4)(-)(FPh))(2)(2-Etpy)(2)] (9) complexes all contain doubly bridged metal centers. The oxygenation of compounds 1-9 was studied by GC-MS and NMR analysis of the organic fragments following decomposition of the product complexes. Hydrocarbon fragment oxidation occurred for compounds in which the substrate moiety was in close proximity to the diiron center. The extent of oxidation depended upon the exact makeup of the ligand set.     

Water-dependent reactions of diiron(II) carboxylate complexes

Carboxylate-rich diiron(II) compounds with varying numbers of water ligands have been characterized, including the first complex with a {Fe2(mu-OH2)2(mu-O2CArTol)}3+ unit. The isolation of these complexes reveals how water can alter the structural properties of carboxylate-bridged diiron(II) core similar to those that occur in a variety of dioxygen-activating metalloenzyme cores. M?ssbauer and variable temperature, variable field magnetic susceptibility experiments indicate that the compound [Fe2(mu-OH2)2(mu-O2CAr4F-Ph)(O2CAr4F-Ph)3(THF)2(OH2)] has a high-spin diiron(II) core with little significant magnetic exchange coupling.     

Sterically hindered carboxylate ligands support water-bridged dimetallic centers that model features of metallohydrolase active sites

The synthesis and characterization of carboxylate-bridged dimetallic complexes are described. By using m-terphenyl-derived carboxylate ligands, a series of dicobalt(II), dicobalt(III), dinickel(II), and dizinc(II) complexes were synthesized. The compounds are [Co(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (1), [Co(2)(mu-OH(2))(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (2a-c), [Co(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (3), [Ni(2)(mu-O(2)CAr(Tol))(4)L(2)] (4), [Ni(2)(mu-HO...H)(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (5), and [Zn(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (6), where Ar(Tol)CO(2)H = 2,6-di(p-tolyl)benzoic acid and L = pyridine, THF, or N,N-dibenzylethylenediamine. Structural analysis of these complexes revealed that additional bridging ligands can be readily accommodated within the [M(2)(mu-O(2)CAr(Tol))(2)](2+) core, allowing a wide distribution of M...M distances from 2.5745(6) to 4.0169(9) A. Unprecedented bridging units [M(2)(mu-OH(2))(2)(mu-O(2)CR)(2)](n+) and [M(2)(mu-HO...H)(2)(mu-O(2)CR)(2)](n+) were identified in 2a-c and 5, respectively, in which strong hydrogen bonding accommodates shifts of protons from bridging water molecules toward the dangling oxygen atoms of terminal monodentate carboxylate groups. Such a proton shift along the O...H...O coordinate attenuates the donor ability of the anionic carboxylate ligand, which can translate into increased Lewis acidity at the metal centers. Such double activation of bridging water molecules by a Lewis acidic metal center and a metal-bound general base may facilitate the reactivity of metallohydrolases such as methionine aminopeptidase (MAP).     

Functional mimic of dioxygen-activating centers in non-heme diiron enzymes: mechanistic implications of paramagnetic intermediates in the reactions between diiron(II) complexes and dioxygen

Two tetracarboxylate diiron(II) complexes, [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(C(5)H(5)N)(2)] (1a) and [Fe(2)(mu-O(2)CAr(Tol))(4)(4-(t)BuC(5)H(4)N)(2)] (2a), where Ar(Tol)CO(2)(-) = 2,6-di(p-tolyl)benzoate, react with O(2) in CH(2)Cl(2) at -78 degrees C to afford dark green intermediates 1b (lambda(max) congruent with 660 nm; epsilon = 1600 M(-1) cm(-1)) and 2b (lambda(max) congruent with 670 nm; epsilon = 1700 M(-1) cm(-1)), respectively. Upon warming to room temperature, the solutions turn yellow, ultimately converting to isolable diiron(III) compounds [Fe(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (L = C(5)H(5)N (1c), 4-(t)BuC(5)H(4)N (2c)). EPR and M?ssbauer spectroscopic studies revealed the presence of equimolar amounts of valence-delocalized Fe(II)Fe(III) and valence-trapped Fe(III)Fe(IV) species as major components of solution 2b. The spectroscopic and reactivity properties of the Fe(III)Fe(IV) species are similar to those of the intermediate X in the RNR-R2 catalytic cycle. EPR kinetic studies revealed that the processes leading to the formation of these two distinctive paramagnetic components are coupled to one another. A mechanism for this reaction is proposed and compared with those of other synthetic and biological systems, in which electron transfer occurs from a low-valent starting material to putative high-valent dioxygen adduct(s).     

Water affects the stereochemistry and dioxygen reactivity of carboxylate-rich diiron(II) models for the diiron centers in dioxygen-dependent non-heme enzymes

Carboxylate-bridged high-spin diiron(II) complexes with distinctive electronic transitions were prepared by using 4-cyanopyridine (4-NCC(5)H(4)N) ligands to shift the charge-transfer bands to the visible region of the absorption spectrum. This property facilitated quantitation of water-dependent equilibria in the carboxylate-rich diiron(II) complex, [Fe(2)(mu-O(2)CAr(Tol))(4)(4-NCC(5)H(4)N)(2)] (1), where (-)O(2)CAr(Tol) is 2,6-di-(p-tolyl)benzoate. Addition of water to 1 reversibly shifts two of the bridging carboxylate ligands to chelating terminal coordination positions, converting the structure from a paddlewheel to a windmill geometry and generating [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(4-NCC(5)H(4)N)(2)(H(2)O)(2)] (3). This process is temperature dependent in solution, rendering the system thermochromic. Quantitative treatment of the temperature-dependent spectroscopic changes over the temperature range from 188 to 298 K in CH(2)Cl(2) afforded thermodynamic parameters for the interconversion of 1 and 3. Stopped flow kinetic studies revealed that water reacts with the diiron(II) center ca. 1000 time faster than dioxygen and that the water-containing diiron(II) complex reacts with dioxygen ca. 10 times faster than anhydrous analogue 1. Addition of {H(OEt(2))(2)}{B}, where B(-) is tetrakis(3,5-di(trifluoromethyl)phenyl)borate, to 1 converts it to [Fe(2)(mu-O(2)CAr(Tol))(3)(4-NCC(5)H(4)N)(2)](B) (5), which was also structurally characterized. Mossbauer spectroscopic investigations of solid samples of 1, 3, and 5, in conjunction with several literature values for high-spin iron(II) complexes in an oxygen-rich coordination environment, establish a correlation between isomer shift, coordination number, and N/O composition. The products of oxygenating 1 in CH(2)Cl(2) were identified crystallographically to be [Fe(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(4-NCC(5)H(4)N)(2)].2(HO(2)CAr(Tol)) (6) and [Fe(6)(mu-O)(2)(mu-OH)(4)(mu-O(2)CAr(Tol))(6)(4-NCC(5)H(4)N)(4)Cl(2)] (7).     

Modeling features of the non-heme diiron cores in O2-activating enzymes through the synthesis, characterization, and oxidation of 1,8-naphthyridine-based complexes

Multidentate naphthyridine-based ligands were used to prepare a series of diiron(II) complexes. The compound [Fe(2)(BPMAN)(mu-O(2)CPh)(2)](OTf)(2) (1), where BPMAN = 2,7-bis[bis(2-pyridylmethyl)aminomethyl]-1,8-naphthyridine, exhibits two reversible oxidation waves with E(1/2) values at +310 and +733 mV vs Cp(2)Fe(+)/Cp(2)Fe, as revealed by cyclic voltammetry. Reaction with O(2) or H(2)O(2) affords a product with optical and M?ssbauer properties that are characteristic of a (mu-oxo)diiron(III) species. The complexes [Fe(2)(BPMAN)(mu-OH)(mu-O(2)CAr(Tol))](OTf)(2) (2) and [Fe(2)(BPMAN)(mu-OMe)(mu-O(2)CAr(Tol))](OTf)(2) (3) were synthesized, where Ar(Tol)CO(2)(-) is the sterically hindered ligand 2,6-di(p-tolyl)benzoate. Compound 2 has a reversible redox wave at +11 mV, and both 2 and 3 react with O(2), via a mixed-valent Fe(II)Fe(III) intermediate, to give final products that are also consistent with (mu-oxo)diiron(III) species. The paddle-wheel compound [Fe(2)(BBAN)(mu-O(2)CAr(Tol))(3)](OTf) (4), where BBAN = 2,7-bis(N,N-dibenzylaminomethyl)-1,8-naphthyridine, reacts with dioxygen to yield benzaldehyde via oxidative N-dealkylation of a benzyl group on BBAN, an internal substrate. In the presence of bis(4-methylbenzyl)amine, the reaction also produces p-tolualdehyde, revealing oxidation of an external substrate. A structurally related compound, [Fe(2)(BEAN)(mu-O(2)CAr(Tol))(3)](OTf) (5), where BEAN = 2,7-bis(N,N-diethylaminomethyl)-1,8-naphthyridine, does not undergo N-dealkylation, nor does it facilitate the oxidation of bis(4-methylbenzyl)amine. The contrast in reactivity of 4 and 5 is attributed to a difference in accessibility of the substrate to the diiron centers of the two compounds. The M?ssbauer spectroscopic properties of the diiron(II) complexes were also investigated.     

Mixed-valent [FeIV(mu-O)(mu-carboxylato)2FeIII]3+ core

The symmetrically ligated complexes 1, 2, and 3 with a (mu-oxo)bis(mu-acetato)diferric core can be one-electron oxidized electrochemically or chemically with aminyl radical cations [*NR3][SbCl6] in acetonitrile yielding complexes which contain the mixed-valent [(mu-oxo)bis(mu-acetato)iron(IV)iron(III)]3+ core: [([9]aneN3)(2FeIII2)(mu-O)(mu-CH3CO2)2](ClO4)2 (1(ClO4)2), [(Me3[9]aneN3)(2FeIII2)(mu-O)(mu-CH3CO2)2](PF6)2 (2(PF6)(2)), and [(tpb)(2FeIII2)(mu-O)(mu-CH3CO2)2] (3) where ([9]aneN3) is the neutral triamine 1,4,7-triazacyclononane and (Me3[9]aneN3) is its tris-N-methylated derivative, and (tpb)(-) is the monoanion trispyrazolylborate. The asymmetrically ligated complex [(Me3[9]aneN3)FeIII(mu-O)(mu-CH3CO2)2FeIII(tpb)](PF6) (4(PF6)) and its one-electron oxidized form [4ox]2+ have also been prepared. Finally, the known heterodinuclear species [(Me3[9]aneN3)CrIII(mu-O)(mu-CH3CO2)2Fe([9]aneN3)](PF6)2 (5(PF6)(2)) can also be one-electron oxidized yielding [5ox]3+ containing an iron(IV) ion. The structure of 4(PF6).0.5CH3CN.0.25(C2H5)2O has been determined by X-ray crystallography and that of [5ox]2+ by Fe K-edge EXAFS-spectroscopy (Fe(IV)-O(oxo): 1.69(1) A; Fe(IV)-O(carboxylato) 1.93(3) A, Fe(IV)-N 2.00(2) A) contrasting the data for 5 (Fe(III)-O(oxo) 1.80 A; Fe(III)-O(carboxylato) 2.05 A, Fe-N 2.20 A). [5ox]2+ has an St = 1/2 ground state whereas all complexes containing the mixed-valent [FeIV(mu-O)(mu-CH3CO2)2FeIII]3+ core have an St = 3/2 ground state. M?ssbauer spectra of the oxidized forms of complexes clearly show the presence of low spin FeIV ions (isomer shift approximately 0.02 mm s(-1), quadrupole splitting approximately 1.4 mm s(-1) at 80 K), whereas the high spin FeIII ion exhibits delta approximately 0.46 mm s(-1) and DeltaE(Q) approximately 0.5 mm s(-1). M?ssbauer, EPR spectral and structural parameters have been calculated by density functional theoretical methods at the BP86 and B3LYP levels. The exchange coupling constant, J, for diiron complexes with the mixed-valent FeIV-FeIII core (H = -2J S1.S2; S(1) = 5/2; S2 = 1) has been calculated to be -88 cm(-1) (intramolecular antiferromagnetic coupling) and for the reduced diferric form of -75 cm(-1) in reasonable agreement with experiment (J = -120 cm(-1)).     

Nitric oxide reactivity of fluorophore coordinated carboxylate-bridged diiron(II) and dicobalt(II) complexes

The synthesis, structural characterization, and NO reactivity of carboxylate-bridged dimetallic complexes were investigated. The diiron(II) complex [Fe(2)(mu-O(2)CAr(Tol))(4)(Ds-pip)(2)] (1), where O(2)CAr(Tol) = 2,6-di(p-tolyl)benzoate and Ds-pip = dansyl-piperazine, was prepared and determined by X-ray crystallography to have a paddlewheel geometry. This complex reacts with NO within 1 min with a concomitant 4-fold increase in fluorescence emission intensity ascribed to displacement of Ds-pip. Although the diiron complex reacts with NO, as revealed by infrared spectroscopic studies, its sensitivity to dioxygen renders it unsuitable as an atmospheric NO sensor. The air-stable dicobalt(II) analogue was also synthesized and its reactivity investigated. In solution, the dicobalt(II) complex exists as an equilibrium between paddlewheel [Co(2)(mu-O(2)CAr(Tol))(4)(Ds-pip)(2)] (2) and windmill [Co(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(Ds-pip)(2)] (3) geometric isomers. Conditions for crystallizing pure samples of each of these isomers are described. Reaction of 2 with excess NO proceeds by reductive nitrosylation giving [Co(mu-O(2)CAr(Tol))(2)(NO)(4)] (5), which is accompanied by release of the Ds-pip fluorophore that is N-nitrosated in the process. This reaction affords an overall 9.6-fold increase in fluorescence emission intensity, further demonstrating the potential utility of ligand dissociation as a strategy for designing fluorescence-based sensors to detect nitric oxide in a variety of contexts.     

Mechanistic studies of the oxidative N-dealkylation of a substrate tethered to carboxylate-bridged diiron(II) complexes, [Fe2(mu-O2CAr(Tol))2(O2CAr(Tol))2(N,N-Bn2en)2

Carboxylate-bridged diiron(II) centers activate dioxygen for the selective oxidation of hydrocarbon substrates in bacterial multicomponent monooxygenases. Synthetic analogues of these systems exist in which substrate fragments tethered to the diiron(II) core through attachment to an N-donor ligand are oxidized by transient species that arise following the introduction of O2 into the system. The present study describes the results of experiments designed to probe mechanistic details of these oxidative N-dealkylation reactions. A series of diiron(II) complexes with ligands N,N-(4-R-Bn)Bnen, where en is ethylenediamine, Bn is benzyl, and R-Bn is benzyl with a para-directing group R = Cl, F, CH3, t-Bu, or OCH3, were prepared. A Hammett plot of the oxygenation product distributions of these complexes, determined by gas chromatographic analysis, reveals a small positive slope of rho = +0.48. Kinetic isotope effect (KIE(intra)) values for oxygenation of [Fe2(mu-O2CAr(Tol))2(O2CAr(Tol))2(N,N-(C6H5CDH)2en)2] and [Fe2(mu-O2CAr(Tol))2(O2CAr(Tol))2(N,N-(C6H5CD2)(C6H5CH2)en)2] are 1.3(1) and 2.2(2) at 23 degrees C, respectively. The positive slope rho and low KIE(intra) values are consistent with a mechanism involving one-electron transfer from the dangling nitrogen atom in N,N-Bn2en to a transient electrophilic diiron intermediate, followed by proton transfer and rearrangement to eliminate benzaldehyde.     

Influence of steric hindrance on the core geometry and sulfoxidation chemistry of carboxylate-rich diiron(II) complexes

The asymmetric terphenyl-2'-carboxylate ligand 3,5-dimethyl-1,1':3',1' '-terphenyl-2'-carboxylate, -O2CArPh,Xyl, was prepared in high yield. This ligand facilitates the assembly of the diiron(II) complexes [Fe2(micro-O2CArTol)2(O2CArPh,Xyl)2(THF)2] [2, -O2CArTol=2,6-di-p-tolylbenzoate], [Fe2(micro-O2CArTol)2(O2CArPh,Xyl)2(pyridine)2] (5), [Fe2(micro-O2CArPh,Xyl)2-(O2CArPh,Xyl)2(THF)2] (3), and [Fe2(micro-O2CArPh,Xyl)2(O2CArPh,Xyl)2(pyridine)2] (6), all of which have a windmill geometry. The iron-iron distance of 3.355[10] A in 6 is approximately 1 A shorter than that in the analogue [Fe2(micro-O2CArTol)2(O2CArTol)2(pyridine)2] (4) and similar to the approximately 3.3 A metal-metal separation at the active site of the reduced diiron(II) form of the soluble methane monooxygenase hydroxylase enzyme (MMOHred). A series of ortho-substituted picolyl-based ligands, 2-picSMe, 2-picSEt, 2-picStBu, 2-picSPh, 2-picSPh(Me3) (Ph(Me3)=mesityl), and 2-picSPh(iPr3) (Ph(iPr3)=2,4,6-triisopropylphenyl), were prepared and allowed to react with [Fe2(micro-O2CAr)2(O2CAr)2(THF)2] to produce [Fe2(micro-O2CAr)3(O2CAr)(picSR)] (7-13, Ar=ArTol or ArPh,Xyl) complexes in 45-87% yields. The substrates tethered to the pyridine N-donor ligands picSR, where R=Me, Et, tBu, or Ph, coordinate to one iron atom of the diiron(II) center by the nitrogen and sulfur atoms to form a five-membered chelate ring. The Fe-S distance be-comes elongated with increasing steric hindrance imparted by the R group. The most sterically hindered ligands, 2-picSPh(Me3) and 2-picSPh(iPr3), bind to the metal only through the pyridine nitrogen atom. The reactions of several of these complexes with dioxygen were investigated, and the oxygenated products were analyzed by 1H NMR spectroscopy and GC/MS measurements following decomposition on a Chelex resin. The amount of sulfoxidation product is correlated with the Fe...S distance. The ratio of oxidized to unoxidized thioether substrate varies from 3.5, obtained upon oxygenation of the weakly coordinated 2-picSPh ligand in 10, to 1.0, obtained for the bulky 2-picSPh(iPr3) ligand in 12, for which the iron-sulfur distance is >4 A. External thioether substrates were not oxidized when present in oxygenated solutions of paddlewheel and windmill diiron(II) complexes containing 1-methylimidazole or pyridine ligands, respectively.     

New synthetic route for organic polyoxometallic clusters: synthetic and structural investigations on the first dumb-bell shaped polyoxozirconium hydroxide with the [Zr9(mu5-O)2(mu3-O)4(mu-O)4(mu-OH)8] core structure

A new route for organic polyoxometallic clusters describes the first dumb-bell-like organic polyoxozirconium hydroxide [[(Cp*Zr)4(mu5-O)(mu3-O)2(mu-OH)4]2Zr(mu-O)4] x 2C7H8 (2; Cp* = C5Me5) involving the treatment of the Br?nsted acidic organozirconium hydroxide [(Cp*Zr)6(mu4-O)(mu-O)4(mu-OH)8] x 2C7H8 (1) with organozirconium compounds.     

Formal encapsulation of [Fe(H2O)6](3+) by {Fe2(hpdta)} units gives a system of S= 13/2 Fe(III)9 oxo clusters showing magnetic hysteresis

Under solvothermal conditions the unprecedented nonanuclear Fe(III) aggregate [Fe9(mu3-O)4(mu-OH)4(hpdta)4]5- is formed through the formal encapsulation of [Fe(H2O)6]3+ by four [Fe2(hpdta)(H2O)2]+ units: the aggregates have ground state spins of S= 13/2 while the observed hysteresis below 1.8 K results from inter-cluster antiferromagnetic coupling.     

Modeling the syn disposition of nitrogen donors at the active sites of carboxylate-bridged diiron enzymes. Enforcing dinuclearity and kinetic stability with a 1,2-diethynylbenzene-based ligand

The syn coordination of histidine residues at the active sites of several carboxylate-rich non-heme diiron enzymes has been difficult to reproduce with small molecule model compounds. In this study, ligands derived from 1,8-naphthyridine, phthalazine, and 1,2-diethynylbenzene were employed to mimic this geometric feature. The preassembled diiron(II) complex [Fe(2)(micro-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(THF)(2)] (1), where Ar(Tol)CO(2)(-) is the sterically hindered carboxylate 2,6-di(p-tolyl)benzoate, served as a convenient starting material for the preparation of iron(II) complexes, all of which were crystallographically characterized. Use of the ligand 2,7-dimethyl-1,8-naphthyridine (Me(2)-napy) afforded the mononuclear complex [Fe(O(2)CAr(Tol))(2)(Me(2)-napy)] (2), whereas dinuclear [Fe(2)(micro-DMP)(micro-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(THF)] (3) resulted when 1,4-dimethylphthalazine (DMP) was employed. The dinuclear core of compound 3 is kinetically labile, as evidenced by the formation of [Fe(O(2)CAr(Tol))(2)(vpy)(2)] (4) upon addition of 2-vinylpyridine (vpy). The diiron analogue of 4, [Fe(2)(micro-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(vpy)(2)] (5), was prepared directly from 1. When the sterically more demanding ligand 2,6-di(4-tert-butylphenyl)benzoate (Ar(4-tBuPh)CO(2)(-)) was used, mononuclear [Fe(O(2)CAr(4)(-)(tBuPh))(2)(THF)(2)] (6) and [Fe(O(2)CAr(4)(-)(tBuPh))(2)(DMP)(2)] (7) formed. The difficulty in stabilizing a dinuclear core with these simple (N)(2)-donor ligands was circumvented by preparing a family of 1,2-diethynylbenzene-based ligands, from which were readily assembled the complexes [Fe(2)(Et(2)BCQEB(Et))(micro-O(2)CAr(Tol))(3)](OTf) (15) and [Cu(2)(Et(2)BCQEB(Et))(micro-I)(2)] (16), where Et(2)BCQEB(Et) is 1,2-bis(3-ethynyl-8-carboxylatequinoline)benzene ethyl ester. The Et(2)BCQEB(Et) framework provides both structural flexibility and the desired syn nitrogen donor geometry, thus serving as a good first-generation ligand in this class.     

A mechanistic study of the reaction between a diiron(II) complex [FeII(2)(mu-OH)2(6-Me3-TPA)2](2+) and O2 to form a diiron(III) peroxo complex

A kinetic study of the reaction between a diiron(II) complex [Fe(II)(2)(mu-OH)(2)(6-Me(3)-TPA)(2)](2+) 1, where 6-Me(3)-TPA = tris(6-methyl-2-pyridylmethyl)amine, and dioxygen is presented. A diiron(III) peroxo complex [Fe(III)(2)(mu-O)(mu-O(2))(6-Me(3)-TPA)(2)](2+) 2 forms quantitatively in dichloromethane at temperatures from -80 to -40 degrees C. The reaction is first order in [Fe(II)(2)] and [O(2)], with the activation parameters DeltaH(double dagger) = 17 +/- 2 kJ mol(-1) and DeltaS(double dagger) = -175 +/- 20 J mol(-1) K(-1). The reaction rate is not significantly influenced by the addition of H(2)O or D(2)O. The reaction proceeds faster in more polar solvents (acetone and acetonitrile), but the yield of 2 is not quantitative in these solvents. Complex 1 reacts with NO at a rate about 10(3) faster than with O(2). The mechanistic analysis suggests an associative rate-limiting step for the oxygenation of 1, similar to that for stearoyl-ACP Delta(9)-desaturase, but distinct from the probable dissociative pathway of methane monoxygenase. An eta(1)-superoxo Fe(II)Fe(III) species is a likely steady-state intermediate during the oxygenation of complex 1.     

Group 13 organoderivatives supported on a metallic oxide model

The [{TiCp*(micro-O)}3(mu3-CH)] (1) metalloligand, (Cp* = eta5-C5Me5), coordinates in a 1:1 ratio to [AlMe3] or 9-BBN to give [{Me3Al}{(mu3-O)(mu-O)2(TiCp)2(TiCp)3(mu3-CH)}](2) or [{(C8H14)B}(mu-H) {(mu3-O)(mu-O)2(TiCp*)3(mu3-CH)}](4), respectively, partial hydrolysis of 2 leads to the new hydroxo-aluminium derivative [{MeAl} {(mu-OH)(mu3-O)}2{(mu-O)2(TiCp*)3-(mu3-CH)}2](3).     

A new class of oxo-bridged high-valent hexamanganese clusters supported by sterically hindered carboxylate ligands

A new class of oxo-bridged high-valent hexamanganese (Mn6) clusters containing a novel (Mn6O8)6+ core, [MnIV(4)MnIII2(mu-O)4(mu3-O)4(dmb)6(O2CR)2]4+ (where dmb=4,4'-dimethyl-2,2'-bipyridine, and RCO2=2,6-di(p-tolyl)benzoate (Ar(Tol)CO2-) (3) or 2,6-di(4-tert-butylphenyl)benzoate (Ar(4-tBuPh)CO2-) (4)), was synthesized using sterically hindered m-terphenyl-derived carboxylate ligands. These complexes can be synthesized by oxidizing the MnII mononuclear complexes, [Mn(dmb)2(OH2)(O2CR)]+ (where RCO2=Ar(Tol)CO2- (1) or Ar(4-tBuPh)CO2- (2)) with (n-Bu4N)MnO4, by direct Mn(II) + Mn(VII) in situ comproportionation reactions, or by ligand substitution on the dinuclear manganese (III,IV) or (IV,IV) complexes, [(Mn2(mu-O)2(dmb)4)](3+/4+). The compound [MnIV4MnIII2(mu-O)4(mu3-O)4(dmb)6(Ar(Tol)CO2)2](OTf)4 [3(OTf)4] crystallizes in the monoclinic space group P2(1)/n, with the cell parameters a=15.447(1) A, b=15.077(2) A, c=27.703(2) A, beta=91.68(2) degrees, V=6449.3(6) A3, and Z=2. The X-ray structure reveals that there are three different bridging modes for the oxo groups: mu, "pyramidal" mu3, and "T-shaped" mu3. Solid-state variable temperature magnetic susceptibility studies suggest that the Mn centers are net antiferromagnetically coupled to yield a diamagnetic ST=0 ground spin state with a large number of low-lying, thermally accessible states with ST>0. 1H NMR spectra were recorded for both Mn6 clusters and selected resonances assigned. The electronic and redox properties of these complexes along with the effect of the presence of the bulky carboxylate ligands are also described here.     

2:2 Fe(III):ligand and "adamantane core" 4:2 Fe(III):ligand (hydr)oxo complexes of an acyclic ditopic ligand

A bis-hydroxo-bridged diiron(III) complex and a bis-mu-oxo-bis-mu-hydroxo-bridged tetrairon(III) complex are isolated from the reaction of 2,6-bis((N,N'-bis-(2-picolyl)amino)methyl)-4-tert-butylphenol (Hbpbp) with iron perchlorate in acidic and neutral solutions respectively. The X-ray structure of the dinuclear complex [{(Hbpbp)Fe([mu-OH)}(2)](ClO(4))(4).2C(3)H(6)O (1.2C3H6O) shows that only one of the metal-binding cavities of each ligand is occupied by an iron(III) atom and two [Fe(Hbpbp)]3+ units are linked together by two hydroxo bridging groups to form a [Fe(III)-(mu-OH)](2) rhomb structure with Fe...Fe = 3.109(1)A. The non-coordinated tertiary amine of Hbpbp is protonated. Magnetic susceptibility measurements show a well-behaved weak antiferromagnetic coupling between the two Fe(III) atoms, J= -8 cm(-1). The tetranuclear complex [(bpbp)(2)Fe(4)(mu-O)(2)(mu-OH)(2)](ClO(4))(4)(2) was isolated as two different solvates .4CH(3)OH and .6H(2)O with markedly different crystal morphologies at pH ca. 6. Complex .4CH(3)OH forms red cubic crystals and .6H(2)O forms green crystalline platelets. The Fe(4)O(6) core of shows an adamantane-like structure: The six bridging oxygen atoms are provided by the two phenolato groups of the two bpbp(-) ligands, two bridging oxo groups and two bridging hydroxo groups. The hydroxo and oxo ligands could be distinguished on the basis of Fe-O bond lengths of the two different octahedral iron sites: Fe-mu-OH, 1.953(5), 2.013(5)A and Fe-mu-O, 1.803(5), 1.802(5)A. The difference in ligand environment is too small for allowing Mossbauer spectroscopy to distinguish between the two crystallographically independent Fe sites. The best fit to the magnetic susceptibility of .4CH(3)OH was achieved by using three coupling constants J(Fe-OPh-Fe)= 2.6 cm(-1), J(Fe-OH-Fe)=-0.9 cm(-1), J(Fe-O-Fe)=-101 cm(-1) and iron(III) single ion ZFS (|D|= 0.15 cm(-1)).