Capillary electrophoresis of amphipathic alpha-helical peptide diastereomers

We have made a rigorous assessment of the ability of capillary electrophoresis to resolve peptide diastereomers through its application to the separation of a series of synthetic 18-residue, amphipathic alpha-helical monomeric peptide analogues, where a single site in the centre of the hydrophobic face of the alpha-helix is substituted by 19 L- or D-amino acids. Such L- and D-peptide pairs have the same mass-to-charge ratio, amino acid sequence and intrinsic hydrophobicity, varying only in the stereochemistry of one residue. CE approaches assessed in their ability to separate diastereomeric peptide pairs included capillary zone electrophoresis (uncoated capillary), micellar electrokinetic chromatography (uncoated capillary in the presence of 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate, CHAPS), open-tubular capillary electrochromatography (C(8)-coated capillary in the presence of 25% 2,2,2-trifluoroethanol (TFE) or 25% ethanol). Overall, the OT-CEC methods were the most effective at separating the most peptide pairs, particularly for those containing hydrophilic side chains. However, the MEKC approach proved most effective for separation of peptide pairs containing hydrophobic or aromatic side chains.     

Capillary zone electrophoresis for polymide composition analysis

Capillary zone electrophoresis (CZE) was employed in polyimide composition analysis. Polymide was decomposed to its corresponding aromatic diamine and aromatic acid monomers by an alkali fusion reaction. Sample treatment is much simpler than published methods, and electropherograms show a good separation of decomposed products under the proper conditions.     

Capillary electrophoresis: An integrated system with a unique split-flow sample introduction mechanism

The performance of an integrated capillary electrophoresis system with a novel split-flow sample injection mechanism and special high sensitivity UV absorbance detector is described. Sample introduction into the capillary is accomplished with a standard HPLC-type microliter syringe. The injected sample is divided proportionally between the separation capillary and an adjustable splitvent. The volume of sample introduced into the capillary can be manipulated by varying the length or the i.d. of the splitvent tubing; or the volume of sample injected. Data are presented showing reproducibility of retention time, peak height, and peak area; minimum detectability; and operation at short UV wavelengths.     

Capillary electrophoresis speciation analysis of various arsenical compounds

Separation of seven organic and inorganic arsenical species, i.e., inorganic arsenite (As III) and arsenate (As V), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsBet), arsenocholine (AsCh) and p-arsanilic acid (pAs) was carried out by capillary electrophoresis (CE) equipped with one of two different optical path cells, i.e., either the standard detection interface (SDI) or the high sensitive detection cell (HSDC). Separation, identification and quantification of the As species were performed by means of a capillary silica column with an alkaline borate buffer at pH 9.3 and direct UV detection at 192 nm. This methodological approach was tested with the abovementioned types of cells, and the results of the two modes were compared. In both cases, good separation was obtained, and also, repeatability in terms of migration times and peak areas was rather satisfactory. With regard to sensitivity, the HSDC allowed peak areas to be obtained, which were ca. 50 times greater than those afforded by the former cell. This also led to a substantial improvement in the limits of detection (LoDs); by a factor of 9 in the case of AsCh.     

Capillary electrophoresis of quantum dots: Minireview

It has been already three decades, since the fluorescent nanocrystals called quantum dots (QDs) appeared and attracted attention of a broad scientific community. Their excellent not only optical but also electronic properties predetermined QDs for utilization in a variety of areas. Besides lasers, solar cells, and/or computers, QDs have established themselves in the field of (bio)chemical labeling as well as medical imaging. However, due to the numerous application possibilities of QDs, there are high demands on their properties that need to be precisely controlled and characterized. CE with its versatile modes and possibilities of detection was found to be an effective tool not only for characterization of QDs size and/or surface properties but also for monitoring of their interactions with other molecules of interest. In this minireview, we are giving short insight in analysis of QDs by CE, and summarizing the advantages of this method for QDs characterization.     

Capillary electrophoresis inductively coupled plasma mass spectrometry

Chemical speciation (extraction of elemental information and identification of molecular environment for an analyte in a complex sample) has been a long sought after goal for analytical chemists. Recently, because of successful developments in more sensitive element-specific detectors and gentle separation schemes, which preserve the true chemical information in a real sample, routine speciation experiments are becoming a common occurrence in the scientific literature. For many reasons, the combination of capillary electrophoresis (for separation of different chemical species) with inductively coupled plasma mass spectrometry (for element and isotope specific detection) has emerged as the method of choice for these analyses. In this article the basic principles of capillary electrophoresis inductively coupled plasma mass spectrometry are discussed. Design consideration for instrument interface, anticipated difficulties with speciation experiments and applications for specific matrices and analytes are also presented in this article.     

Capillary electrophoresis of synthetic peptide standards varying in charge and hydrophobicity

A mixture of eight structurally closely related synthetic peptides as capillary electrophoretic (CE) standards is introduced. The almost identical mass-to-charge ratio of the standards, coupled with their random-coil (i.e., no secondary structure) nature, offer a potent analytical test for CE to separate peptides varying only subtly in hydrophobicity. Parameters varied to effect a separation included background electrolyte concentration, temperature, applied voltage in capillary zone electrophoresis (CZE in uncoated capillaries), as well as the introduction of hydrophobic mechanisms to the separation either through the use of micelles or C8-coated capillaries. Our step-by-step approach culminated in an optimized combination of a CZE mechanism for separation of differently charged peptide groups (based on common mass-to-charge ratio) and an ion-pairing mechanism (effecting a separation within each group of identically charged peptides), which we have termed ion-interaction CZE or II-CZE. The study clearly shows how the peptide standards allow an excellent assessment of the resolving power of CE.     

Capillary electrophoresis of microbial aggregates

Uncontrolled aggregation of bacterial cells is a significant disadvantage of electrophoretic separations. Various aspects of the electrophoretic behavior of different strains of Gram‐positive Bacillus cereus, Bacillus subtilis, Sarcina lutea, Staphylococcus aureus(1), and Micrococcus luteus bacteria and Gram‐negative Escherichia coli bacteria were investigated in this study. Our findings indicate that bacteria can be rapidly analyzed by CZE with surface charge modification by calcium ions (Ca²⁺). Bound Ca²⁺ ions increase zeta potential to more than 2.0 mV and significantly reduce repulsive forces. Under the above conditions, bacterial cells create compact aggregates, and fewer high‐intensity signals are observed in electropherograms. The above can be attributed to the bridging effect of Ca²⁺ between bacterial cells. CE was performed to analyze bacterial aggregates in an isotachophoretic mode. A single peak was observed in the electropherogram.     

Capillary electrophoresis of DNA for molecular diagnostics

A number of applications of capillary zone electrophoresis (CZE) in sieving liquid polymers (notably linear polyacrylamides and cellulose) for the analysis of polymerase chain reaction (PCR) products of clinically relevant, diagnostic DNA, are reviewed. The fields covered are: human genetics, quantitative gene dosage, microbiology and virology, forensic medicine and therapeutic DNA (notably, antisense nucleotides). Some unique, novel developments are highlighted, such as: (i) nonisocratic CZE, i.e., temperature-programmed CZE for detection of DNA point mutations; (ii) the synthesis of novel N-substituted acrylamides, offering extreme resistance to alkaline hydrolysis coupled to high hydrophilicity. In the field of denaturing gradient gel electrophoresis (DGGE), as routinely performed in gel slabs, a novel methodology is described in CZE: double-gradient DGGE. In this technique, two gradients are simultaneously applied along the migration direction: a chemical (or thermal) denaturing gradient, for partially unwinding homo- and hetero-duplexes of DNA, and a porosity gradient, for recompacting diffuse bands melting over a broader range of denaturing conditions. It is thus demonstrated that chemical gradients, in addition to temperature gradients, can be easily implemented even in a capillary format.     

Capillary electrophoresis for forensic drug analysis: A review

This paper reviews recent applications of capillary electrophoresis to forensic drug analysis and covers the literature since 2001. A brief overview of capillary electrophoresis is followed by a discussion of analytical applications which have been categorized into two sections: (i) drug seizures and non-biological samples, and (ii) forensic toxicology and biological samples.     

Capillary zone electrophoresis study of cyclodextrin--lipoic acid host-guest interaction

Lipoic acid is a naturally occurring compound which is being widely investigated for its therapeutic effects in the treatment or prevention of a variety of diseases associated with oxidative injury, particularly diabetes. The diversity of therapeutic applications of lipoic acid requires an appropriate formulation to control its bioavailability, site-targeting delivery and to overcome its inherent chemical instability. In this regard, cyclodextrins (CDs) are ideally suitable due to their well-documented ability to include in their cavity proper guest molecules and protect them from physical or chemical damages. Lipoic acid forms 1:1 inclusion complexes with betaCD as shown in a previous report of an extended investigation that also indicated the suitability of capillary zone electrophoresis (CZE) for the study of such host-guest interactions. In view of these possible applications, we extended the CZE analysis to determine the strength of binding, in a pH 9 phosphate buffer, of lipoic acid with other CD derivatives such as alphaCD, gammaCD and the alkylated derivatives of betaCD, namely (2-hydroxypropyl)-beta-CD (HPbetaCD), and heptakis(2,3,6-tri-O-methyl)-beta-CD (TMbetaCD). Once established that the easily available betaCD is the most suitable receptor for lipoic acid, we set up and here describe a simple and reliable procedure for the quantitative determination of lipoic acid in commercial dietary supplement tablets containing also other active substances and excipients.     

Capillary electrophoresis separation of heterocyclic nitrosoamino acid-conformers at sub-ambient temperatures

The separation of a selected group of naturally occurring, heterocyclic nitrosoamino acids was achieved by capillary zone electrophoresis and the resolution of the syn and anti conformers improved as the temperature was lowered to 5 °C. The double peaks observed for each nitrosoamino acid are probably caused by the slow kinetics of conformational isomerism. The experimental setup consisted of a P/ACE 5510 electrophoresis system, a 57 cm polyacrylamidecoated capillary, and a 10 mM phosphate buffer, pH 7.2, containing 2 mM of 3-(N-N-dimethylmyristylammonio)propanesulfonate (DMMAPS) and 0.1% Tween 20. Our study shows that (a) the lower the temperature, the greater the resolution and the longer the migration times; and (b) different nitrosoamino acid conformers were resolved at different temperatures because of differences in the rate of isomerization. For example, the conformers of N-nitrosothiazolidine-4-carboxylic acid were partially resolved at 30 °C while those of N-nitrosoproline were well resolved at the same temperature.     

Capillary electrophoresis of complex natural polysaccharides

Complex natural polysaccharides, glycosaminoglycans (GAGs), are a class of ubiquitous macromolecules that exhibit a wide range of biological functions and participate and regulate multiple cellular events and (patho)physiological processes. They are generally present either as free chains (hyaluronic acid and bacterial acidic polysaccharides) or as side chains of proteoglycans (PGs; chondroitin/dermatan sulfate, heparin/heparan sulfate, and keratan sulfate) and are most often found in cell membranes and in the extracellular matrix. The recent emergence of modern analytical tools for their study has produced a virtual explosion in the field of glycomics. CE, due to its high resolving power and sensitivity, has been useful in the analysis of intact GAGs and GAG-derived oligosaccharides and disaccharides affording concentration and structural characterization data essential for understanding the biological functions of GAGs. In this review, novel off-line and on-line CE-MS and MS/MS methods for screening of GAG-derived oligosaccharides and disaccharides will be discussed.     

Capillary zone electrophoresis with field enhanced sample stacking as a tool for targeted metabolome analysis of adenine nucleotides and coenzymes in Paracoccus denitrificans

The main aim of this work was to demonstrate the applicability of capillary zone electrophoresis in combination with field enhanced sample stacking in targeted metabolome analyses of adenine nucleotides – AMP, ADP, ATP, coenzymes NAD⁺, NADP⁺ and their reduced forms in Paracoccus denitrificans. Sodium carbonate/hydrogencarbonate buffer (100 mM, pH 9.6) with the addition of β‐CD at a concentration of 10 mM was found to be an effective BGE for their separation within 20 min. Besides this, special attention was paid to the development of the procedure for the extraction of specific metabolites from the bacterium P. denitrificans. This procedure was not only optimised to achieve the highest metabolite yields but also to obtain a sample that was fully compatible with the online preconcetration strategy used. The developed methodology was finally applied in a study of the bacterium P. denitrificans at various stages of the active respiratory chain.     

Capillary electrophoresis analysis of glucooligosaccharide regioisomers

Complex gluco-oligosaccharide mixtures of two regioisomer series were successfully separated by CE. The gluco-oligosaccharide series were synthesized, employing a dextransucrase from Leuconostoc mesenteroides NRRL B-512F, by successive glucopyranosyl transfers from sucrose to the acceptor glucose or maltose. The glucosyl transfer to both acceptors, occurring through the formation of alpha1-->6 linkages, differed for the two series only in the glucosidic bond to the reducing end namely alpha1-->6 or alpha1-->4 bond for glucose or maltose acceptor, respectively. Thus, the combination of the two series results in mixed pairs of gluco-oligosaccharide regioisomers with different degrees of polymerization (DP). These regioisomer series were first derivatized by reductive amination with 9-aminopyrene-1,4,6-trisulfonate (APTS). Under acidic conditions using triethyl ammonium acetate as electrolyte, the APTS-gluco-oligosaccharides of each series were separated enabling unambiguous size determination by coupling CE to electrospray-mass spectrometry. However, neither these acidic conditions nor alkaline buffer systems could be adapted for the separation of the gluco-oligosaccharide regioisomers arising from the two combined series. By contrast, increased resolution was observed in an alkaline borate buffer, using differential complexation of the regioisomers with the borate anions. Such conditions were also successfully applied to the separation of glucodisaccharide regioisomers composed of alpha1-->2, alpha1-->3, alpha1-->4, and alpha1-->6 linkages commonly synthesized by glucansucrase enzymes.     

Capillary electrophoresis method for determination of related substances in glutathione reduced drug substance

Summary A sensitive capillary electrophoretic method using low pH with direct UV detection has been developed to evaluate the impurity profile of reduced glutathione obtained from its production and purification. The method is characterized by high detection sensitivity and selectivity. Validation has been performed with model mixtures consisting of the main known related substances—oxidized glutathione, glutamylcystein, cysteinylglycine and cysteine. The results from this study show that with respect to quantification criteria the method is acceptable for routine control of reduced glutathione for pharmaceutical application.     

Capillary electrophoresis in the diagnosis of surgical site infections

A surgical site infection (SSI) is an infection that occurs after surgery in the part of the body where the surgery took place. An SSI may range from a spontaneously limited wound discharge within 7–10 days of an operation to a life‐threatening postoperative complication, such as a sternal infection after open heart surgery. Most SSIs are caused by contamination of an incision with microorganisms from the patient's own body during surgery. From the analytical point of view, the complex nature of these samples as well as the low concentrations of analytes require a system with high sensitivity and efficiency. Such situation requires a technique such as CE, which is a powerful and versatile separation technique that promises to rival HPLC when applied to the separation of both charged and neutral species. During the study, it has been demonstrated that CZE identifies characteristics of such groups of pathogens such as bacteria Gram (+) and different species of bacteria Gram (?), and also develops weekly individual profiles for patients after application of antibiotics. This was done in order to show the impact of antibiotic therapy in change “numbers” of bacteria present in the wound after surgery. The method proved to be the ideal straight specificity in the case of Escherichia coli (100%). Finally, analysis of the spectra and the second derivatives of the UV‐Vis spectra confirmed the similarity in the profiles and showed that the CZE is a great method for fast screening test in bacterial infection.     

Capillary electrophoresis of liposomes functionalized for protein binding

CE enabled assessing the attachment of hexa-histidine-tagged proteins to functionalized phospholipid liposomes. The liposomes were made of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, phosphatidyl-ethanolamine, cholesterol and distearoyl-glycero-3-phosphoethanolamine-N-methoxy(polyethylene glycol) in a molar ratio of 29:26:40:5. The unilamellar vesicles, which had an average diameter of 170 nm, were labelled by inclusion of FITC-dextran for fluorescence detection. CE was carried out in poly(vinyl alcohol) (PVA)-coated capillaries at 25 degrees C with a BGE consisting of Tris-HCl (50 mM, pH 8.0). For conjugation of the liposomes with the proteins (soluble synthetic receptor fragments with molecular mass of 60 and 70 kDa, respectively), Ni(2+) was implanted into the vesicle surface by an anchor lipid containing a nitrilotriacetate acid (NTA) group as complexation agent for the metal ions. The difference in surface charge enabled the separation of the different species of interest by CE: plain vesicles, vesicles functionalised with Ni-NTA, vesicle-protein complexes and the species formed upon removal of the Ni-ions by complexation with EDTA. Loss of the Ni-ions resulted in the release of the proteins and the reappearance of the plain Ni-free NTA-liposome species in the electropherograms.