High performance microcolumn exclusion chromatography of proteins and peptides

A new method for the determination of the molecular weight of proteins and peptides has been developed. It is based on microcolumn exclusion chromatography in trifluoroacetic acid on silica gel sorbents of different porosities with a linear molecular-weight calibration dependence in the range of 5 × 10² - 7 × 10⁴ Da. It was shown that in this eluent proteins and peptides adopt the random-coil conformation and do not undergo hydrolysis for 2–3 days at room temperature.     

Characterization of polymers by size exclusion chromatography using multiple detection. Determination of the Mark-Houwink constants for Pullulan 100

Summary A size exclusion chromatography system is outlined using multiple detection by a low angle laser light scattering detector (LALLS) and a concentration detector (RI) in conjunction with a differential viscosimeter. The combination of these three detectors parmits the easy and rapid determination of Mw, Mn, Mn and of the Mark-Houwink constants k and α. This system is based on commercially available components and we describe its use with an aqeous solvent system. A similar configuration described in the literature employs a homemade differential viscosimeter constructed by the authors and uses an organic solvent for the SEC. Working with aqeous solvents requires high performance of all equipment components. We will demonstrate the capability of this system with Pullalan as an example.     

Analysis of sodium polycarboxylates in detergents by size exclusion chromatography

Summary This paper describes the quantitative analysis and preparative isolation of sodium polycarboxylates in detergents by means of gel permeation chromatography. An analytical monitoring method separates the polymers from other low molecular detergent ingredients within 10 minutes. There is no separation of the various molecular weight polycarboxylate macromolecules themselves. They elute from the column as a single narrow peak at the exclusion volume. A second preparative gel filtration method allows isolation of polycarboxylates in amounts necessary for further characterization. Appropriate sample pretreatments and possible interferences are discussed.     

Error introduced into determination of pore size distribution by size exclusion chromatography

Simultaneous use of large standard molecules and small particles of the product examined gives rise to errors in pore size determination by size exclusion chromatography. This error is calculated for packings of spherical particles, thus making corrections possible.     

Indirect conductimetric detection of nonelectrolytes in microcolumn liquid chromatography

Summary Indirect conductimetric detection of nonelectrolytes was investigated in microcolumn liquid chromatography. The mobile phase contained an electrolytic substance which maintained a high background and analytes were indirectly detected owing to a depression of the background signal. The dynamic reserve, defined as the ratio of the background to its noise level, was 9.3×10⁴, and the detection limits at S/N=3 were 10–32 ng for alcohols examined.     

Interlaced size exclusion liquid chromatography of monoclonal antibodies

Size exclusion chromatography is a widely performed analysis of monoclonal antibodies, primarily used to monitor the levels of higher weight molecular species such as aggregates. Owing to the subtleties of these separation mechanisms and frequently observed partial resolutions of components in these separations, many common methods for increasing the method throughput are not practical as they trade off resolution for speed. Short columns, high flow rates and smaller particles are examples of these approaches. In this paper a practical method is demonstrated for injecting samples onto the column in rapid succession and gating the detection window to monitor the elution of each sample individually. At any given instant approximately two samples are eluting through the column. By co-ordinating the injection and detection time windows the samples can be kept discrete and significant throughput enhancements achieved, up to nearly 2-fold improvements are demonstrated. A rudimentary theory is development to show that the throughput improvements can be predicted to approximation by simple column characteristics. Experimental results for a series of monoclonal antibodies demonstrate the equivalency of the method to a conventional injection approach, the throughput increase, and the robustness of the method.     

Composition determination of binary polymer mixtures by size exclusion chromatography with light scattering detection

<正>Base on the principle of absolute quantification of size exclusion chromatography(SEC),a light scattering(LS) detector coupled with a concentration detector(refractive index detector) is utilized to determine the compositions of complicated binary mixtures.A theoretical analysis predicts that the response factors for both LS and RI detectors are linear functions with the composition of any specified polymer mixtures in the binary polymer mixtures.Two pairs of complicated binary mixtures were used to test the theory mentioned in the present paper,and the experimental results show an excellent accordance with the theory.     

Packed microcolumn SFC coupled with photodiode array UV detector and inductively coupled plasma detector (SFC-photodiode array UV-ICP)

Hyphenation of packed microcolumn SFC, a photodiode array UV detector, and an inductively coupled plasma spectrometer has been developed in order to evaluate the stability of acetylacetone complexes under supercritical conditions.     

The potential of on-line flame photometric detection in microcolumn liquid chromatography

The potential of an interface for the on-line coupling of microcolumn liquid chromatography (LC)and a flame photometric detector (FPD) has been further investigated. With the micro-LC/FPD system, relatively high-molecular-weight polar compounds such as cyclic adenosine monophosphate, guanosine monophos- phate, glucose monophosphate, fructose monophosphate, and phytic acid were separated and selectively detected. In order to increase the sensitivity, on-line preconcentration with a microprecolumn inserted in the rotorof a Valcovalve has been applied. Preliminary results have shown that an injection volume of at least 500 1-11 water containing organophosphorus acids at a 5–50 ng/rnl concentration level is possible.     

Characterisation of polymers by size exclusion chromatography using multiple detection. Investigations on the determination of structural differences of hydroxyethyl starches

Summary An aqueous size exclusion chromatography system is outlined using dual detection by a multi-angel laser light scattering photometer (MALLS) and a concentration detector (RI). This system makes possible the determination of the molecular weight distribution of water soluble polymers in conjunction with the radius of gyration. The differences in the radii of gyration at the same molecular weights of two hydroxyethyl starches with different molecular structure are presented qualitatively. The determination of the Mark-Houwink relation for these polymers leads to a qualitatively similar result.     

Indirect photometric detection of monovalent cations via postsuppressor ion replacement in microcolumn ion chromatography

Summary Monovalent cations were indirectly detected via postcolumn suppressor ion replacement in microcolumn ion chromatography. The ion-repalcement column loaded by chromophoric ions was connected to the suppressor column. The eluent, nitric acid, was converted to water through the suppressor and anion-replacement columns, while the analyte cations were coeluted with the chromophoric anions. The analyte cations were indirectly detected by measuring UV absorptions of the chromophoric anions.     

Interactions between sodium dodecyl sulphate and non-ionic cellulose derivatives studied by size exclusion chromatography with online multi-angle light scattering and refractometric detection

The novel approach described allows to characterise the surfactant-polymer interaction under several sodium dodecyl sulphate (SDS) concentrations (0-20 mM) using size exclusion chromatography (SEC) with online multi-angle light scattering (MALS) and refractometric (RI) detection. Three different cellulose derivatives, hydroxypropyl cellulose (HPC), hydroxypropyl methyl cellulose (HPMC) and hydroxyethyl cellulose (HEC), have been studied in solution containing 10 mM NaCl and various concentrations of sodium dodecyl sulphate. It is shown that this approach is well suited for successful application of both Hummel-Dreyer and multi-component light scattering principles and yields reliable molecular masses of both the polymer complex and the polymer itself within the complex, the amount of surfactant bound into the complex as well as appropriate values of the refractive index increment (dn/dc)micro, of both the complex and the polymer in question. The more hydrophobic derivatives HPC and HPMC adsorbed significantly more SDS than HEC. The inter-chain interactions close to critical aggregation concentration (cac) were clearly seen for HPC and HPMC as an almost two-fold average increase in polymer molecular mass contained in the complex.     

分子排阻色谱硅质填料的制备及其对蛋白质的分离机理

利用自制的四种不同粒径的硅溶胶,通过堆积法来制备分子排阻色谱多孔硅质填料,该填料在进行化学键合改性后,形成二醇固定相。利用二醇固定相对蛋白质进行分离分析方面的研究。此填料粒径小,有利于蛋白质生物大分子的高效快速分离分析。     

Elution behavior of shortened multiwalled carbon nanotubes in size exclusion chromatography

We present a rigorous investigation on elution behaviors of ultrasonically shortened multiwalled carbon nanotubes in size‐exclusion chromatography. The size separation of five carbon nanotube samples that underwent ultrasonic shortening for varying lengths of time revealed the existence of three kinds of carbon species: large nanotubes, small nanotubes, and amorphous carbon species. Separation of the three different carbon species was confirmed by SEM analyses on the fractionated eluates and also by light scattering/UV absorbance double detection. The chromatographic peak intensity ratio between the large and small nanotubes suggested an increased amount of small carbon nanotubes upon longer mechanical treatment time. The effect of the concentration of carbon nanotube dispersion on elution behavior was examined, and the elution volume of the shortened nanotubes was found to decrease upon dilution while that of the large nanotubes showed the opposite tendency. Unusual elution behaviors of the multiwalled carbon nanotubes were also observed by altering the flow rate, and these behaviors could be explained by the longer equilibration time taken for large nanotubes to access the pores of the packing materials and a possible morphology change of small carbon nanotubes.     

Automated sample cleanup using on-line coupling of size exclusion chromatography to high resolution gas chromatography

A fully automated on-line sample cleanup system based on the coupling of size exclusion chromatography to high resolution gas chromatography is described. The transfer technique employed is based on fully concurrent solvent evaporation using a loop-type interface, early vapor exit and co-solvent trapping. Optimization of the LC-GC transfer was done visually via an all-glass oven door. To circumvent the problem of mixing within the injection loop, an adaptation was made to the standard loop-type interface. The determination of a series of additives in a polymer matrix is presented as one example of the vast range of applications opened up by this technique.     

Exploration of cardanol-based phenolated and epoxidized resins by size exclusion chromatography and MALDI mass spectrometry

Cardanol and cardanol derivatives are among the most important biobased materials currently investigated in green chemistry, as renewable and promising building blocks in lieu of traditional raw materials from non renewable resources, in particular owing to the olefinic linkages on the C15 alkyl side-chain. Despite the increasing interest they arouse, analytical chemistry dedicated to cardanol and associated resins has been rarely reported in the literature, found even poorer when dealing with chromatography and mass spectrometry. In this work, a thorough molecular characterization was conducted using matrix assisted laser desorption ionization (MALDI) mass spectrometry, size exclusion chromatography (SEC), and SEC–MALDI coupling to gain insights into the composition of phenolated, epoxidized, and epoxidized phenolated cardanol. A nomenclature was proposed to properly describe the numerous species found in these materials, while simulations of the unsaturation patterns and their comparison with the detected patterns in MALDI-MS gave useful details about the phenolation treatment expected to occur on the polyunsaturated C15 side chain. Finally, the SEC–MALDI off-line coupling allowed SEC peaks to be deconvoluted by mass spectrometry and MALDI artefacts related to matrix adduction to be pointed out.     

Effect of method of solution on observed molecular weight distribution of barley starch and starch derivatives in size exclusion chromatography

Summary Samples of native barley starch and six starch derivatives were suspended (0.1% sample concentration) in four different solvents: the eluent (pH 11 buffer), dimethylsulfoxide, 0.1 M NaOH or 0.5 M NaOH and kept in a boilling water bath for 5 to 60 minutes or shaken for 60 minutes. The average molecular weight values , and the polydispersity value were determined with a TSK PW-type column using narrow standard calibration. Only a small part of the samples dissolved in the eluent. The dissolution of sample in dimethylsulfoxide was dependent on sample type. Of the NaOH solutions, 0.5 M NaOH was the only one that dissolved all the samples. Therefore, 0.5 M NaOH appears to be the solvent of choice for starch molecules.     

High temperature (70°C) size exclusion chromatography of petroleum waxes with RI and FID detection

Molecular weight distribution of solid petroleum waxes is a key parameter for the general characterization of these materials. Particular interest concerns extremely large components, typically present in oil distillation residua, and solid deposits found in oil production facilities. Molecular weight distributions of oil waxes were determined in this work by high temperature size exclusion chromatography. Separations were carried out with two different eluents, namely toluene and ortho-dichlorobenzene and two detection systems, these being a differential refractive index and a flame ionization detector. Toluene proved to be the best choice when combined with flame ionization detection. Better uniformity of response was the greatest advantage achieved by this approach. The experimental set up permitted analysis of samples containing molecules with up to 138 carbon atoms. Burning properties of very large molecules, isomerism affecting calibration, and signal asymmetry when flame ionization detection was adopted were three issues still requiring additional efforts to understand and to improve analysis accuracy.     

Contribution of size exclusion chromatography and thermal analysis methods in the study of the radiochemical behavior of plastic materials

Sterilization by irradiation techniques is considered to be an improved method to treat polluted products of human consumption. Secondary effects, that may be generated in the components of packaging materials, could induce organoleptic damage and some physico-chemical modifications, observed especially in plastic materials. In order to demonstrate any such secondary changes, we have investigated the effects of beta-irradiation (a treatment which could induce either a reticulation or a cleavage in a polymeric sequence) on three polymers; namely, low density polyethylene, polystyrene and polyvinyl chloride. The techniques used to identify irradiation-induced modifications of these polymers were size exclusion chromatography and thermal analysis. Thermal analysis showed a decrease in the percentage of crystallinity of polyethylene after its radiosterilization. Exclusion chromatography highlighted a reticulation for irradiated polyvinyl chloride and polystyrene.