铜催化异噁唑还原环清洁高效合成1-氨基-2-乙酰基蒽醌简

以水为反应介质,水合肼为还原剂,研究了痕量铜催化3-甲基蒽醌-[1,2-c]-异噁唑还原开环反应以清洁高效合成1-氨基-2-乙酰基蒽醌,考察了不同种类过渡金属硝酸盐的催化性能,发现Cu（NO₃）₂性能最好. 加入 2.6% 的催化剂和1.3倍的水合肼,在室温反应 2 h,底物转化率和目标产物选择性分别可达到 97.2%和 95%,TON达到38. 产品结构经氢核磁谱和质谱得以确证,主要副产为羟基取代的1-氨基-2-乙酰基蒽醌. 此外,提出了铜催化 3-甲基蒽醌-[1,2-c]-异噁唑还原开环反应合成 1-氨基-2-乙酰基蒽醌的可能反应机理.     

STUDIES ON CHROMONES AND XANTHONE DERIVATIVES

Abstract

2-Methyl-6-phenyl chromone la and a variety of its derivatives were synthesized. The reactivity of In and other chromones with aromatic aldehydes, hydrazine hydrate, hydrazine derivatives. Hydroxylamine hydrochloride, different primary amines and Grignard reagents was investigated. The I.R. and H¹NMR spectra of the products are discussed.     

Synthesis and Some Reactions of Quinoxalinecarboazides

Chlorination of ethyl(quinoxalin‐2(1H)one)‐3‐carboxylate 1 gave ethyl (2‐chloroquinoxaline)‐3‐carboxylate 2 ;thionation of 1 by P₂S₅ or 2 by thiourea yielded the same product 3 . Reaction of chloro compound 2 or thiocompound 3 with hydrazine hydrate gave pyrazolylquinoxaline 4 . The reaction of ester 1 with thiourea or hydrazine hydrate afforded pyrimido quinoxaline 5 or carbohydrazide 6 ; the reaction of 6 with carbon disulfide in basic medium followed by alkylation afforded oxadiazoloquinoxaline derivatives 7, 8a,b . Carboazide 9 was produced by reaction of 5 with nitrous acid. Compound 9 on heating in an inert solvent, with or without amines, in alcohols or hydrolysis in H₂O undergoes Curtius rearrangments to yield 10‐13 . Reaction of 13 with thiosemicarbazide gave triazoloquinoxaline 14 which on reaction with alkylhalides or hydrazine hydrate yielded 15a‐c while hydrolysis of 13 gave 3‐aminoquinoxalinone 16 which was used as an intermediate to produce 17‐20 .     

Cu/活性炭催化剂：水合肼还原制备及催化甲醇氧化羰基化

以活性炭为载体,水合肼为还原剂制备了负载型Cu/活性炭催化剂,考察了水合肼/硝酸铜物质的量的比对催化甲醇气相氧化羰基化性能的影响,并采用XRD、XPS、H2-TPR和SEM等手段对催化剂进行了表征。结果表明,不加入还原剂水合肼时,催化剂中仅有CuO;随着水合肼/硝酸铜物质的量的比的增加,二价铜逐步被还原为Cu2O和/或单质Cu0,未被还原的Cu(OH)2在催化剂干燥过程中分解形成分散态CuO存在于催化剂表面。当水合肼/硝酸铜物质的量的比为0.75时,催化剂的催化性能最好,碳酸二甲酯的时空收率为120.62 mg.(g.h)-1,选择性为74.51%,甲醇转化率达到3.88%。在93 h反应时间内,催化剂都保持了较高的反应活性和选择性。此时铜物种以Cu2O和分散态CuO为主,Cu2O是主要的活性物种。     

Synthesis of well‐defined pH‐responsive PPEGMEA‐g‐P2VP double hydrophilic graft copolymer via sequential SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA) backbone and poly(2‐vinylpyridine) (P2VP) side chains were synthesized by successive single electron transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate (PEGMEA) macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained homopolymer then reacted with lithium diisopropylamide and 2‐chloropropionyl chloride at ?78 °C to afford PPEGMEA‐Cl macroinitiator. poly(poly(ethylene glycol) methyl ether acrylate)‐g‐poly(2‐vinylpyridine) double hydrophilic graft copolymers were finally synthesized by. ATRP of 2‐vinylpyridine initiated by PPEGMEA‐Cl macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as catalytic system via the grafting‐ from strategy. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.40). pH‐Responsive micellization behavior was investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy and this kind of double hydrophilic graft copolymer aggregated to form micelles with P2VP‐core while pH of the aqueous solution was above 5.0. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of novel β-amino acid derivatives

In the work discussed in this paper, novel β-amino acid derivatives were prepared by Michael addition between 3-substituted-2-propenic acid and hydrazine hydrate. The optimum reaction conditions were determined by analyzing the effects of the ratio of the starting materials, temperature, and reaction time. The conclusions were: reaction temperature 80 °C, reaction time 8 h, n (3-substituted-2-propenic acid)/n (hydrazine hydrate) = 1:15. Products were characterized by measurement of melting point, elemental analysis, and IR and ¹H NMR spectroscopy.     

Thermo-responsive microfibrillar graft copolymer based on carboxymethylagarose and N-isopropylacrylamide

Carboxymethylation of agarose with ClCH₂COOH in 2-propanol, formamide or dimethyl sulfoxide were evaluated in order to obtain water soluble derivatives. Higher yield (86%) and degree of substitution of carboxymethylation in primary alcoholic groups (0.70) were obtained using dimethyl sulfoxide. Carboxymethylagarose-g-PNIPAAm copolymers were synthesized by free radical graft copolymerization using Ce⁴⁺ and S₂O₈²⁻/TEMED as initiators via conventional or microwave-assisted methods. Carboxymethyl derivatives and graft copolymers were characterized by FT-IR and NMR spectroscopies, elemental analysis, TGA and DSC and morphology analysis by SEM and AFM. High nitrogen content (9.7%) was found with Ce⁴⁺ by conventional method and the obtained analysis allowed to confirm the NIPAAm grafting on the carboxymethylagarose chain. Thermoresponsive materials have a low critical solution temperature between 32 and 34 °C. Thermal stability increased ca. 60% with PNIPAAm grafting. Surface analysis of copolymers reveals a microfibrillar type morphology with diameter of 4–6 μm. Synthesized glycoconjugates could find applications in bioactive compounds transport in biological systems.     

Synthetic approaches to fused heteroaromatic compounds by the condensation reactions of functional pyrroles

Condensation reactions ol the “functionalized” pyrroles which were obtained by one pot synthesis of aziridines and acetylenic dipolarophiles were discussed. On treatments of 3,4-di- and 2,3,4-tribenzoylpyrroles with hydrazine hydrate and phosphorus pentasulfide, the several pyrrolo-pyridazine derivatives and fused thiophenes, respectively, were prepared. The structure proofs for the products of the reaction of the 2,3,4-tribenzoylpyrrole ( 9a ) with hydrazine hydrate were based on the ¹³C FT-nmr spectrum of the corresponding ¹³C-enriched compounds.     

Synthesis and characterization of cellulose-g-polyoxyethylene (2) hexadecyl ether solid–solid phase change materials

A series of novel solid–solid phase change materials, namely, cellulose-g-polyoxyethylene (2) hexadecyl ether (Cellulose-g-E₂C₁₆) copolymers, were synthesized using toluene 2,4-diisocyanate (TDI) as a coupling reagent in the ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl). The optimum prepolymerization conditions were determined to be 25 °C and 75 min without catalyst, and the optimum reaction conditions of the grafting step were 90 °C, 6 h and 0.1 wt% dibutyltin dilaurate (DBTDL, weight percent of TDI). The successful grafting was confirmed by FTIR and ¹H-NMR. The properties of the Cellulose-g-E₂C₁₆ copolymers were investigated by DSC, TG and XRD. It is shown that the heat storage ability and phase change temperature of Cellulose-g-E₂C₁₆ copolymers depended on the degree of substitution. The crystalline type of the grafted E₂C₁₆ was not affected by the cellulosic backbone. Compared with E₂C₁₆, Cellulose-g-E₂C₁₆ copolymers showed better thermal stability. They are expected to be widely applied in the area of thermal energy storage.     

A novel and efficient synthesis of pyrazolo[3,4-d]pyrimidine derivatives and the study of their anti-bacterial activity

In this work 4-amino-6-aryl-2-phenyl pyrimidine-5-carbonitrile derivatives were synthesized through a one-pot,three-component reaction of an aldehyde,malononitrile and benzamidine hydrochloride,in the presence of magnetic nano Fe₃O₄ particles as a catalyst under solvent-free conditions.3-Amino-6-aryl- 2-phenylpyrazolo[3,4-d]pyrimidine derivatives were prepared through an efficient and environmentally friendly reaction between 4-amino-6-aryl-2-phenylpyrimidine-5-carbonitrile derivatives and hydrazine hydrate and their antibacterial activity has been evaluated.     

Synthesis and antimicrobial activity of some new coumarin and dicoumarol derivatives

PTC reaction of coumarin derivative 1 with alkyl halides afforded C₄ oxygen alkylation products 2a-d in appreciative yield, whereas with phenyl isothiocyanate gives the C₃ addition product 4 ; also, one-pot three-component PTC reaction was investigated. Treatment of coumarin 1 with aromatic aldehydes in different molar ratios gives 3-arylidene derivatives 7a,b and the dicoumarol derivatives 8a,b . Pyrano chromene 9 and pyrano pyridine 10 were obtained by reaction of arylidene 7a with ethyl acetoacetate through Michael cycloaddition reaction. The stability of pyrone ring in 3-arylidene 7 and dicoumarol 8 towards different nucleophilic reagents under reflux and/or fusion conditions has been studied by the action of hydrazine hydrate, ammonium acetate, methyl amine, and p-toluidine afforded compounds 11 and 13a-c . The antimicrobial activity of some synthesized compounds has been investigated.     

Synthesis and Transformations of 4-Phosphorylated 2-Alkyl(aryl)-5-hydrazinooxazoles

Treatment of 1-phosphorylated 2,2-dichloroethenylcarboxamides with excess hydrazine hydrate gives in high yields phosphorylated derivatives of 2-alkyl(aryl)-5-hydrazinooxazoles containing the P(O)(OCH₃)₂, P(O)(OC₂H₅)₂, and P⁺(C₆H₅)₃ClO₄ ^- groups in the 4-position of the ring. The presence of the hydrazine group in these oxazole derivatives was confirmed not only by the spectral data, but also by the reactions with p-toluic aldehyde, p-toluic chloride, and phenyl isothiocyanate.     

End‐grafting copolymers of styrene and 4‐vinylpyridine on an interacting solid surface

Copolymers of styrene and 4‐vinylpyridine with a styrene fraction f varying from 1 to 0 were grafted onto a silicon substrate in the melt. The grafting reaction and the stability of the grafted chains were investigated by Fourier transform infrared and X‐ray photoelectron spectroscopy. The thickness and surface morphology of the grafted copolymer layers were characterized with ellipsometry and atomic force microscopy (AFM). The copolymer chains were successfully grafted to the surface of the silicon substrate by a reaction between the hydroxyl groups of the nitroxide moiety at the end of the copolymers and the silanol groups on the surface of the silicon wafer. A measurement of the thickness of the grafted copolymer layers showed that the ratio of grafted‐layer thickness to the unperturbed chain radius of gyration decreased with the increasing fraction of 4‐vinylpyridine in the copolymer; this indicated that the grafted layer was strongly attracted to the substrate. In addition, an accelerated grafting process was observed at grafting times ranging from 48 to 72 h for pure poly(4‐vinylpyridine) and copolymers with f values of 0.3 and 0.5. AFM observation revealed that the grafted layers densely and homogeneously covered the silicon substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1332‐1343, 2005     

Simple Transformation of Hierarchical Hollow Structures by Reduction of Metal–Organic Frameworks and Their Catalytic Activity in the Oxidation of Benzyl Alcohol

Metal–organic framework (MOF)-based derivatives have been found to be promising heterogeneous catalysts for organic transformations. Herein, hollow-structure Cu-MOFs derived by reduction of Cu₃(BTC)₂ (BTC=1,3,5-benzenetricarboxylate; denoted as RCB) were prepared by using hydrazine hydrate as a reducing agent under various conditions. The influence of hydrazine hydrate induced the structure of Cu₃(BTC)₂ and led to dynamic variation in the interior and exterior as well as oxidation states of the Cu ion. The synthesized materials were characterized by SEM, TEM, N₂ sorption isotherms, XRD, and XPS. The product of the catalytic reaction was observed by GC-MS. In addition, the prepared RCBs were found to have excellent catalytic activity and selectivity for benzyl alcohol oxidation when assisted by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO).     

Chemistry of heteroanalogs of isoflavones

Thiazole analogs of isomeric isoflavones were synthesized from -(2,4-dimethyl-5-thiazolyl)-2-hydroxyacetophenones, and their reaction with hydrazine hydrate and alkylating and acylating agents was studied. The reaction of thiazole derivatives of 7-hydroxychromone with hydrazine hydrate proceeds with opening of the pyrone ring and subsequent cyclization of the intermediate to o-hydroxyphenylpyrazole derivatives. The reaction of hydrazine hydrate with thiazole derivatives of 5-hydroxychromone, which proceeds with retention of the pyrone ring, leads to hydrazones. The structures of the new compounds were confirmed by the PMR spectra.See [1] for communication 6.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 25–28, January, 1979.     

Synthesis of heterocyclic compounds from 2-phenyl-1,2,3-triazole-4-formylhydrazine

2-Phenyl-1, 2, 3-triazole-4-formylhydrazine (2) was prepared by hydrazinolysis of the corresponding ester 1. Reaction of 2 with CS₂/KOH gave the oxadiazole derivatives (3) which via Mannich reaction with different dialkyl amines furnished 3-N, N-dialkyl derivatives (4a–c). Also, condensation of 2 with appropriate aromatic acid in POCI₃ yielded oxadiazole derivatives (5a–c), or with aldehydes and ketones afforded hydrazones (6a–c). Cyclization of (6a–c) with acetic anhydride gave the desired dihydroxadiazole derivatives (7a–c). On the other hand, reaction of dithiocarbazate (8) with hydrazine hydrate gave the corresponding triazole derivative (9) which on treatment with carboxylic acids in refluxing POCI₃ yielded s-triazole [3, 4–b]-1, 3, 4-thiadiazole derivatives (10a–b). The structures of all the above compounds were confirmed by means of IR, ¹H NMR, MS and elemental analysis.     

Grafting of living poly(ethylene oxide) onto polystyrene via aromatic nucleophilic displacement of activated nitro groups

Polystyrene of M?_ω = 2.2 × 10⁴ was alkylated with 4-nitrophthalimidomethyl groups as grafting sites. Several backbone polymers with various degrees of grafting sites (G = 2–100%) were prepared and characterized by elemental analysis, IR, ¹H- and ¹³C-NMR, and viscosity measurements. “Living” poly(ethylene oxide) with narrow molecular-weight distribution was prepared in the presence of 15-crown-5, and grafted onto the 4-nitrophthalimidomethylated polystyrene. The nitro displacement reaction was fast and the grafting yield was quantitative (100%). The graft copolymers are highly soluble in water and in organic solvents. The intrinsic viscosities of the graft copolymers are higher than those of the backbone polymers. The intrinsic viscosities show an initial increase followed by a decrease as the degree of grafting increase.     

5-(4,6-Diphenyl-2-pyrimidinyl)-1,3,4-oxadiazole-2-thione with Some C-Electrophiles and N-Nucleophiles

5-(4,6-Diphenyl-2-pyrimidinyl)-1,3,4-oxadiazole-2-thione reacted with haloalkanes or their derivatives containing side chain oxo group to give S-alkylated compounds. Aminomethylation and acylation of the thione yielded N₍₃₎-derivatives. Treatment of the title compound with hydrazine hydrate in butanol resulted in 4-amino-5-(4,6-diphenyl-2-pyrimidinyl)-1,2,4-triazole-3-thione via a recyclization reaction. Reaction of the title compound with hydrazine hydrate or phenylhydrazine in dioxane led to formation of the corresponding thiocarbohydrazides. The latter in the presence of a base were cyclized to 4-amino-1,2,4-triazole-3-thiones.     

Synthesis of some new 4-oxo-thiazolidines,tetrazole and triazole derived from 2-SH-benzothiazole and antimicrobial screening of some synthesized

A new heterocyclic derivative of 2-mercaptobenzothiazole (MBT) comprising 4-oxothiazolidines, tetrazole and triazole, through the reaction of (MBT) with hydrazine hydrate obtained 2-hydrazobenothiazol (1), which was condensed with various aromatic aldehydes. Azomethine derivatives (2a–c) are converted into a number of 4-oxothiazolidines (3a–c) and tetrazole derivatives (4a–c), through the reaction of azomethine derivatives (2a–c) with mercaptoacetic acid and sodium azide, respectively. Also the reaction of compound (1) with triethylorthoformate and nitrous acid to produce the corresponding (triazole and tetrazole) benzothiazole (5,6) was reported.Triazole moieties reported condensation (MBT) with ethylbromo acetate and potassium hydroxide by the fusion method and resulted in ester-2-mercaptobenzothiazole (7), which was treated with hydrazine hydrate to give a hydrazine derivative (8), then converting these compounds (8) to phenyl semicarbazide (9) and phenyl thiosemicarbazide (10) derivatives. Cyclization compounds (9,10) in alkaline media (4 N·NaOH) gave triazoles compounds (11,12). Furthermore the compound (8) was converted to the dithiocarbazate salt (13) which was then cyclized with hydrazine hydrate to give substituted triazole (14). The prepared compounds were identified by spectral methods (FTIR, ¹H NMR, ¹³C NMR) and some of its physical properties were measured and furthermore the effects of the preparing compounds on some strains of bacteria were studied.     

Synthesis and characterization of model 3‐miktoarm star copolymers of poly(dimethylsiloxane) and poly(2‐vinylpyridine)

3‐Miktoarm star copolymers, 3μ‐D₂V, with two poly(dimethylsiloxane) (PDMS) and one poly(2‐vinylpyridine) (P2VP) arm, were synthesized by using anionic polymerization–high vacuum techniques and (chloromethylphenylethyl)methyl dichlorosilane, heterofunctional linking agent, with two SiCl groups and one CH₂Cl group. The synthetic strategy involves the selective reaction of the two ? SiCl groups with PDMSOLi living chains, followed by reaction of the remaining chloromethyl group with P2VPLi. Combined molecular characterization results (size exclusion chromatography, membrane osmometry, and ¹H NMR spectroscopy) revealed a high degree of structural and compositional homogeneity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 614–619, 2006