Surface Organometallic Chemistry on Oxides: Reaction of Trimethylphosphine with Bis(allyl)rhodium Grafted onto Silica

The reaction of Rh(eta(3)-C(3)H(5))(3) with the surface hydroxyl groups of partially dehydroxylated silica leads to the formation of the surface organometallic complex (&tbd1;SiO)(&tbd1;SiOX)Rh(eta(3)-C(3)H(5))(2), 1 (where X is H or Si&tbd1;), with evolution of propene. The reaction of 1 with PMe(3) was examined, and two major pathways were discovered. Reductive elimination of two allyl ligands as 1,5-hexadiene and coordination of PMe(3) give the surface product (&tbd1;SiO)Rh(PMe(3))(3), 2, which was characterized by elemental analysis, IR and (31)P MAS NMR spectroscopy. We also prepared 2 independently from CH(3)Rh(PMe(3))(3) and partially dehydroxylated silica. The second major reaction pathway is the elimination of propene to give (&tbd1;SiO)(2)Rh(eta(1)-C(3)H(5))(PMe(3))(3), 3. The presence of the sigma-bound allyl ligand was inferred from its characteristic IR spectrum. The reactivity of 3 toward CO was examined: insertion of CO into the Rh-C bond followed by reductive elimination of the silyl ester &tbd1;SiOC(O)C(3)H(5) produces (&tbd1;SiO)Rh(CO)(PMe(3))(2), 4. In static vacuum, 3 decomposes to give allyl alcohol, which is slowly decarbonylated by 2.     

Catalytic Hydrogenolysis at Low Temperature and Pressure of Polyethylene and Polypropylene to Diesels or Lower Alkanes by a Zirconium Hydride Supported on Silica-Alumina: A Step Toward Polyolefin Degradation by the Microscopic Reverse of Ziegler–Natta Polymerization

Cleavage and polymerization with the same catalyst: The catalyst system named in the title, which cleaves polyethylene and polypropylene under a hydrogen atmosphere, is also capable of polymerizing ethylene or propylene. This shows the close relationship between olefin insertion and β-alkyl elimination [Eq. (a), (P)=polymer chain(P)].     

Selective Catalytic Transfer Dehydrogenation of Alkanes and Heterocycles by an Iridium Pincer Complex

Catalytic alkane dehydrogenation is a reaction with tremendous potential for application. We describe a highly active PSCOP‐pincer iridium catalyst for transfer dehydrogenation of cyclic and linear alkanes. The dehydrogenation of linear alkanes occurs under relatively mild conditions with high regioselectivity for α‐olefin formation. In addition, the catalyst system is very effective in the dehydrogenation of heterocycles to form heteroarenes and olefinic products.     

介孔二氧化硅负载高分散钒催化剂的制备及乙烷选择氧化性能

以高比表面积的介孔二氧化硅为载体, 采用等体积浸渍法制备了一系列介孔二氧化硅负载钒催化剂, 并探究了其乙烷选择氧化反应性能. 利用X射线衍射(XRD)、 紫外-可见漫反射光谱(UV-Vis DRS)和氢气程序升温还原(H₂-TPR)等方法对催化剂的物化性质进行了表征, 研究了钒负载量对催化剂结构特征的影响. 结果表明,随着钒负载量的增加, 钒物种在催化剂表面的存在形式由高分散低聚的VO _x 转变为高聚的VO _x, 其中高分散钒物种有利于提高目标产物乙烯和乙醛的选择性.     

堇青石负载La-Mn-O复合氧化物催化剂的甲苯催化燃烧性能

以堇青石蜂窝陶瓷为载体,以La2O3,Mn(NO3)2为基本原料,掺杂一些稀土等非贵重金属元素,采用浸渍法制备了系列负载La-Mn-O复合氧化物催化剂.考察了焙烧温度等对甲苯催化燃烧性能的影响,并对催化剂进行了XRD,TPR表征.结果表明,800 ℃焙烧的LaMn/Cord催化剂具有较高的甲苯催化燃烧性能;Ce取代催化剂中部分La后能改善催化剂的氧化活性,当Ce∶La=1∶1(摩尔比)时催化性能最佳,在260 ℃的反应温度下甲苯转化率达到90%以上.     

Adsorption of Bilirubin-Albumin Complex on the Surface of Highly Dispersed Silica

The interaction of bilirubin with albumin in aqueous buffer solutions is studied and the stability constants of the formed complex are determined. The adsorption of bilirubin and albumin from their individual and mixed solutions on the surface of highly dispersed silica is studied as a function of pH and albumin concentration. It is shown that the character of the adsorption of bilirubin from solutions containing albumin changes significantly compared to the adsorption from an individual solution.     

二氧化硅负载磷钼钒酸铯选择性催化硝化苯酚为邻硝基苯酚

采用溶胶-凝胶法制备了二氧化硅负载磷钼钒酸铯催化剂,利用XRD、红外、SEM以及物理吸附等技术手段对催化剂进行了表征分析,并以稀硝酸（30%）为硝化剂,考察了该催化剂对苯酚硝化反应的催化性能,系统研究了反应时间、催化剂用量、硝酸与苯酚用量以及催化剂重复利用等对催化反应的影响。 结果表明,制备的负载磷钼钒酸铯催化剂具有典型的Keggin结构,在温和的苯酚硝化反应条件下,表现出优良的催化活性和高的邻硝基苯酚选择性,在实验优化条件下,邻硝基苯酚收率达到88%,催化剂回收方便可多次重复使用。 负载磷钼钒酸铯催化苯酚硝化反应结合水蒸汽蒸馏提供了一种简单可行的制备邻硝基苯酚的方法。     

Molecular Organometallic Chemistry on Surfaces: Reactivity of Metal Carbonyls on Metal Oxides

Metal carbonyls react on metal oxide surfaces to give a wide range of structures analogous to those of known compounds. The reactions leading to formation of surface-bound metal carbonyls are explained by known molecular organometallic chemistry and the functional group chemistry of the surfaces. The reaction classes include formation of acid-base adducts as the oxygen of a carbonyl group donates an electron pair to a Lewis acidic center; nucleophilic attack at CO ligands by basic surface hydroxyl groups or O^2? ions; ion-pair formation by deprotonation of hydrido carbonyls to give carbonylate ions; interaction of bifunctional complexes with surface acid-base pair sites such as [Mg^2⊕O^2?]; and oxidative addition of surface hydroxyl groups to metal clusters. The reactions of surface-bound organometallic species include redox condensation and cluster formation on basic surfaces (paralleling the reactions in basic solution) as well as oxidation of mononuclear metal complexes and oxidative fragmentation of metal clusters by reaction with surface hydroxyl groups. Most supported metal carbonyls are unstable at high temperatures, but some, including osmium carbonyl cluster anions on the basic MgO surface, are strongly stabilized in the presence of CO and are precursors of catalysts for CO hydrogenation at 550 K.     

基于表面金属有机化学方法的硅胶表面氧化钛的制备及表征

以普通硅胶为载体, 采用表面金属有机化学合成技术, 通过“一锅”反应制备了硅胶表面金属有机钛化合物, 然后经高温煅烧获得了硅胶表面氧化钛. 采用傅里叶变换红外光谱(FTIR)、 X射线光电子能谱(XPS)、 热重分析(TG-DTA)及原子力显微镜(AFM)对硅胶表面金属有机钛化合物和表面氧化钛进行了结构表征. 结果表明, 高温煅烧过程中, 硅胶表面金属有机钛化合物不仅脱除了有机配体, 并且通氧使其表面“再生”羟基, 确保了钛的四配位形式不变; 氧化钛通过Si—O—Ti键锚定在硅胶表面, 呈分散、 孤立状态分布. 高温煅烧后, 硅胶的骨架结构保持完好.     

表面富锡MCM-41分子筛的表面金属有机化学制备及其对苯酚羟基化催化反应性能研究

采用SnBu₄在MCM-41表面的接枝反应和后续处理制备出了一种只在表面含锡的MCM-41型介孔分子筛。通过与采用纳米SnO₂和MCM-41机械混合法、SnCl₄浸渍法、水热合成法等制备的具有相当硅锡比(Si/Sn≈100)的SnMCM-41分子筛进行结构和对苯酚羟基化反应催化性能的比较发现， 由该法所得分子筛的水热稳定性明显提高，并在苯酚羟基化反应中表现出优良的催化活性、选择性和过氧化氢利用率。本文还详细考察了该催化剂对苯酚羟基化反应的最佳反应条件。     

介孔二氧化硅负载磷钨杂多酸催化合成聚四氢呋喃

采用浸渍法制备了介孔二氧化硅(SiO2)负载的磷钨杂多酸(PW12)催化剂(PW12/SiO2),其物化性质和表面酸强度经BET,IR,TG-DTG和Hammett指示剂法表征.以PW12/SiO2催化四氢呋喃开环聚合合成聚四氢呋喃(PTHF),考察了PW12的负载量[w(PW12)]和焙烧温度对催化剂活性的影响.实验结果表明,在w(PW12)为35.0%,于230 ℃焙烧活化3 h的条件下制备的催化剂(35Cat)活性最高.以35Cat为催化剂,用量占反应物总质量的15.0%时,PTHF收率达60.2%.     

表面金属有机化学:SnMe4在HY沸石超笼表面的接枝反应

研究了高真空条件下SnMe4在HY沸石超笼的接枝反应,并用元素分析,ICP, GC, XRD, FTIR, DTG, DTA, UV-vis, DRS, N2吸附等方法对产物的组成、结构和性质进行了详细表征.研究结果表明,两者可以定量地、有选择性地进行化学反应,将确定数目的三甲基锡基团接枝在沸石的超笼中.反应可以在非常低的温度下快速进行,表观活化能为10.4 kJ·mol-1.经SnMe4改性后的HY沸石分子筛BET比表面积降低,孔体积变小,对不同尺寸的烃分子表现出明显的吸附择形性.     

等离激元共振光转热增强负载纳米金对丁二烯选择性加氢的催化性能

采用阳离子吸附法制备了氧化石墨烯负载纳米金(Au)催化剂(Au/GO), 通过调变Au的负载量(质量分数0.2%~2%), 实现了Au在10~21 nm粒径的可控制备. 室温下热红外测试显示0.2 W/cm²光照条件下, 随着金属负载量和粒径的增加, Au/GO光热温度可升高至110 ℃, 且光热转换效率高达88%. 研究发现, 以丁二烯的选择性催化加氢作为探针反应, 在0.2 W/cm²光照条件下, 丁二烯的转化率随Au负载量的增加先升高后降低, 丁烯选择性在90%以上; 当金负载量为0.5%(颗粒尺寸约15 nm), 光热转换温度为100 ℃时, 样品表现出较高的丁二烯转化率(99%)和丁烯选择性(90%), 且催化剂经过144 h稳定性测试无失活趋势. 与同等条件下的热催化反应相比, 光-热驱动的Au/GO的催化活性提高了5倍. 原位X射线光电子能谱测试分析表明, Au/GO催化性能的提升主要来源于等离子体光转热过程中激发纳米金表面产生了大量的Au ^δ+活性位点.     

KF负载氧化物高效催化缺电子烯与胺类的共轭加成反应

提供了一种新型高效的催化缺电子烯与胺类的共扼加成的反应体系。首先合成了一系列负载型氟化钾固体碱,并用于催化上述反应。通过对不同载体选择考察,筛选出氟化钾负载氧化镁固体碱为最佳催化剂。在进一步的催化反应过程中发现,该催化剂对反应具有很高的催化活性,能催化该反应在短短数分钟内完成。操作简单方便,不需要任何溶剂,催化剂价格低廉,反应收率高,可重复使用,具有化学选择性,适用范围广泛等均为该催化体系的主要特征。     

XPS Study of the Surface Composition of a Catalytic System: Iron Promoted by Potassium and Aluminum Oxides

The surface composition of a model catalyst for ammonia synthesis based on iron promoted with aluminum and potassium oxides was investigated by X-ray photoelectron spectroscopy. The surface was studied in oxidized, passivated, and reduced states. The redistribution of components on the surface is studied in the course of reduction in hydrogen and overheating at 700°C. It is shown that a 4–6-mn thick surface layer is enriched with promoters (K and Al) and impurities (Si), while the concentration of iron is low. Promotion by potassium and aluminum oxides makes the catalyst more resistant to overheating.     

Highly Selective Removal of Perfluorinated Contaminants by Adsorption on All‐Silica Zeolite Beta

Perfluorinated alkylated substances (PFASs) are widely used in industrial and commercial applications, leading to a widespread occurrence of these persistent and harmful contaminants in our environment. Removal of these compounds from surface and waste waters is being mandated by European and U.S. governments. Currently, there are no treatment techniques available that lower the concentrations of these compounds for large water bodies in a cost‐ and energy‐efficient way. We hereby propose a hydrophobic, all‐silica zeolite Beta material that is a highly selective and high‐capacity adsorbent for PFASs, even in the presence of organic competitors. Advanced characterization data demonstrate that the adsorption process is driven by a very negative adsorption enthalpy and favorable steric factors.