热致液晶（LC70）／PET共混物的结构与性能

采用ＷＡＸＤ、ＤＳＣ、ＰＯＭ、ＳＥＭ和力学测试方法研究了ＬＣ７０／ＰＥＴ原位复合材料的结构与性能。结果表明,当ＬＣ７０／ＰＥＴ＜２０％时,ＬＣ７０对ＰＥＴ的结晶生长具有一定促进作用;当ＬＣ７０／ＰＥＴ＞３０％时,共混物结晶能力迅速下降,结晶放热和熔融焓明显降低。     

Preparation and characterization of heat-resistant PET/bio-based polyester blends for hot-filled bottles

To improve the glass transition temperature (T_g) and heat resistance of polyethylene terephthalate (PET) bottle, poly (ethylene glycol 1,4-cyclohexane dimethylene isosorbide terephthalate) (PEICT) with a unique cyclic structure was introduced into PET. The miscibility of the PET/PEICT blends and their feasibility as a heat resistant bottle were investigated. The introduction of PEICT into PET increases the T_g and the PET/PEICT blends exhibit a single T_g, indicating good miscibility between PEICT and PET. Furthermore, the T_g and crystallinity of the PET/PEICT blends can be adjusted by controlling the amount of PEICT added. The PET/PEICT blends were transparent in the visible light range (no significant change in transparency) because the blends were truly miscible as confirmed by Fox equation. As expected, the introduction of PEICT into PET bottle allows for improved heat resistance and shape stability due to the rigid molecular structure and chirality of the two tetrahydrofuran rings in the isosorbide group of PEICT. Based on our results, the as-prepared PET/PEICT blends with controllable high heat resistance can be used as a cost-effective alternative material for various hot-filling conditions in the beverage industry by adjusting the optimal ratio of PEICT to PET for each product (e.g. fruit juice, tea).     

聚苯基膦酸二苯砜酯对PET凝聚相阻燃作用的研究

采用热重分析、Ｘ－射线光电子能谱和红外光谱分析等手段，研究了含聚苯基膦酸二苯砜酯（ＰＳＰＰＰ）的聚对苯二甲酸乙二酯（ＰＥＴ）阻燃体系的热化学，探讨了ＰＳＰＰＰ对ＰＥＴ的阻燃机理．ＰＳＰＰＰ的加入，明显改变了ＰＥＴ的热分解行为：ＰＳＰＰＰ拓宽了ＰＥＴ的分解温度范围，降低了ＰＥＴ在可燃温度范围内的分解产物的量；在ＰＥＴ的点燃温度以下，ＰＳＰＰＰ对ＰＥＴ的降解起到一定的促进作用，而在点燃温度以上，产生的降解产物有利于促进炭化．４００℃以上，ＰＥＴ和ＰＳＰＰＰ的结构发生了明显的变化，所产生的结构有利于ＰＥＴ的降解，使ＰＥＴ的分子量急剧减小，粘度下降，易于形成熔滴，有利于促使着火部分离开火源，增加燃烧的ＰＥＴ表面的物质损耗和热损耗，起到阻燃作用．     

PET-SWNT nanocomposites through ultrasound assisted dissolution-evaporation

Poly(ethylene terephthalate) (PET) based nanocomposites have been prepared with single walled carbon nanotubes (SWNTs) through an ultrasound assisted dissolution-evaporation method. Differential scanning calorimetry studies showed that SWNTs nucleate crystallization in PET at weight fractions as low as 0.3%, as the nanocomposite melt crystallized during cooling at temperature 24 °C higher than neat PET of identical molecular weight. Isothermal crystallization studies also revealed that SWNTs significantly accelerate the crystallization process. Mechanical properties of the PET-SWNT nanocomposites improved as compared to neat PET indicating the effective reinforcement provided by nanotubes in the polymer matrix. Electrical conductivity measurements on the nanocomposite films showed that SWNTs at concentrations exceeding 1 wt% in the PET matrix result in electrical percolation. Comparison of crystallization, conductivity and transmission electron microscopy studies revealed that ultrasound assisted dissolution-evaporation method enables more effective dispersion of SWNTs in the PET matrix as compared to the melt compounding method.     

New fluorescence method for the determination of the critical micelle concentration by photosensitive monoazacryptand derivatives

A novel fluorescence method for the determination of the critical micelle concentration (cmc) is reported. The cmc values of nonionic and anionic surfactants were evaluated utilizing a photosensitive monoazacryptand-Ba2+ complex, whose fluorescence intensity is sensitively changed by environmental conditions based on the photoinduced electron transfer (PET) mechanism as a fluorescent probe (PET method). Based on a comparison of the cmc values obtained by the PET method versus those obtained by conventional fluorescence-based methods as well as the values reported in the literature, one can conclude that the PET method is useful for the cmc determination. In particular, the PET method was more effective for the cmc determination of nonionic surfactants with very low cmc values (< 10(-5) M) than any other fluorescence-based method. In the cases of anionic surfactants, the PET method revealed the formation of the premicellar aggregates comprised of surfactant molecules and fluorescent probes below the cmc. Moreover, the hydrophobicity around the monoazacryptand-Ba2+ complex incorporated into various nonionic surfactant micelles was evaluated by this PET method.     

磷酸三苯酯对PBT／PET共混体系结晶行为的影响

用广角Ｘ－角线衍射法和差法扫描量热法研究了磷酸三苯酯对ＰＢＴ／ＰＥＴ共混体系结晶行为影响，结果表明：ＴＰＰＷ作为该共混体系的稳定剂，只能延长在熔融状态下酯交换反应发生的时间，ＴＰＰ含量一定时，熔融时间增加，ＰＢＴ，ＰＥＴ之间的酯交换反应同样会发生，不同熔融时间，就要求ＴＰＰ的用量也不相同。ＴＰＰ在ＰＢＴ／ＰＥＴ共混体系中没有结晶成核剂的作用，它也不改变ＰＢＴ，ＰＥＴ的结晶结构。     

Multimodality Imaging Agents with PET as the Fundamental Pillar

Positron emission tomography (PET) provides quantitative information in vivo with ultra‐high sensitivity but is limited by its relatively low spatial resolution. Therefore, PET has been combined with other imaging modalities, and commercial systems such as PET/computed tomography (CT) and PET/magnetic resonance (MR) have become available. Inspired by the emerging field of nanomedicine, many PET‐based multimodality nanoparticle imaging agents have been developed in recent years. This Minireview highlights recent progress in the design of PET‐based multimodality imaging nanoprobes with an aim to overview the major advances and key challenges in this field and substantially improve our knowledge of this fertile research area.     

Preparation of conductive,flexible and transparent films by in situ deposition of polypyrrole nanoparticles on polyethylene terephthalate

In this study polypyrrole (PPy) nanoparticles were deposited as a thin film on the modified surface of polyethyleneterephthalate (PET) by in situ chemical polymerization in the presence of sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (DBSNa) and mixture of them as the surfactant. The surface of PET was modified by KOH before deposition and was investigated for conductivity and adhesion of PPy nanoparticles to PET. Resulting conductive flexible films were characterized by UV–Vis spectroscopy, fieldemission scanning electron microscopy, contact angle measurements and four-point-probe technique for conductivity. Direct morphological observation (FESEM) and electrical measurements indicated that the morphology, conductivity and the nature of deposited PPy films depend on surfactant, surface modification of PET and monomer concentration. In optimized process condition, uniform conductive films of PPy were obtained with good adhesion to PET.     

Synthesis and morphology control of raspberry-like poly(ethylene terephthalate)/polyacrylonitrile microspheres

The fabrication of raspberry-like poly(ethylene terephthalate)/polyacrylonitrile (PET/PAN) microspheres by γ-ray radiation-induced polymerization of acrylonitrile on micron-sized PET microspheres were first reported in this work. A PET emulsion was firstly prepared by dispersing a PET solution with 1,1,2,2-tetrachloroethane/phenol mixture as the solvent into an aqueous solution of sodium dodecyl sulfate. Then, PET microspheres were formed by precipitating the PET emulsion droplets from ethanol. The influence of the PET solvent and the weight ratio of ethanol to PET emulsion on the morphology of the PET microspheres had been investigated. After the surface of the prepared PET microspheres was grafted with poly(acrylic acid), the grafting polymerization of AN also had been successfully initiated by γ-ray radiation to form PAN microspheres with a size of about 100 nm on the PET microspheres. This work provides a new method to fabricate micron-sized PET microspheres, and further expands the functionalization of PET and its application fields.     

Headgroup effect on silane structures at buried polymer/silane and polymer/polymer interfaces and their relations to adhesion

Sum frequency generation (SFG) vibrational spectroscopy was used to study the effect of silane headgroups on the molecular interactions that occur between poly(ethylene terephthalate) (PET) and various epoxy silanes at the PET/silane and PET/silicone interfaces. Three different silanes were investigated: (3-glycidoxypropyl) trimethoxysilane (γ-GPS), (3-glycidoxypropyl) methyl-dimethoxysilane (γ-GPMS), and (3-glycidoxypropyl) dimethyl-methoxysilane (γ-GPDMS). These silanes share the same backbone and epoxy end group but have different headgroups. SFG was used to examine the interfaces between PET and each of these silanes, as well as silanes mixed with methylvinylsiloxanol (MVS). We also examined the interfaces between PET and uncured or cured silicone with silanes or silane-MVS mixtures. Silanes with different headgroups were found to exhibit a variety of methoxy group interfacial segregation and ordering behaviors at various interfaces. The effect of MVS was also dependent upon silane headgroup choice, and the interfacial molecular structures of silane methoxy headgroups were found to differ at PET/silane and PET/silicone interfaces. Epoxy silanes have been widely used as adhesion promoters for polymer adhesives; therefore, the molecular structures probed using SFG were correlated to adhesion testing results to understand the molecular mechanisms of silicone-polymer adhesion. Our results demonstrated that silane methoxy headgroups play important roles in adhesion at the PET/silicone interfaces. The presence of MVS can change interfacial methoxy segregation and ordering, leading to different adhesion strengths.     

光诱导电子转移反应在有机合成中的应用

对近十年来报道的在有机合成中有重要意义的光诱导电子转移反应做了简要的总结. 包括六个部分: (1)光诱导电子转移(PET)反应的基本原理, (2) PET诱导的自由基离子裂解和去保护基反应, (3) PET诱导的加成和环加成反应, (4) PET诱导的环化反应和串联环化反应, (5)不对称PET反应, (6)微反应器中的PET反应.     

A New Nano‐Structured Flame‐Retardant Poly(ethylene terephthalate)

A modified nano‐hydrotalcite was used as inorganic flame‐retardant fillers for poly(ethylene terephthalate) (PET) polymers. A flame‐retardant compound was obtained from layered hydrotalcite (LDH) dispersed in brominated polystyrene (PBS) solution and then solvent evaporation from the dissolved PBS samples. The compound of PBS/LDH was characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) and was found to have high aspect ratio LDH dispersed in the PBS matrix. Flame‐retardant PET composite was prepared by melt‐compounding the flame‐retardant compound of PBS/LDH and PET. Improvement in the fire retardancy of the nano‐flame‐retardant PET composite obtained was found by measuring the oxygen index. The nanostructure of flame‐retardant PET composite was chirecterized by scanning electron microscopy (SEM) of flame‐retardant PET composite. The mechanical properties of the flame‐retardant PET nano‐composite were also characterized.     

Reorganization of poly(ethylene terephthalate) structures and conformations to alter properties

The solid‐state morphologies, structures, and chain conformations of poly (ethylene terephthalate) (PET) have been reorganized/altered from those normally produced by solution and melt processing. This has been achieved by two distinct methods: (1) formation of a crystalline inclusion compound (IC) between guest PET and host γ‐cylodextrin (γ‐CD), followed by removal of the host γ‐CD and coalescence of the guest PET (c‐PET) and (2) rapid precipitation of PET from a warm trifluoracetic acid solution into a large excess of rapidly stirred acetone (p‐PET). Our prior observations (FTIR, NMR, DSC, X‐ray) demonstrated that c‐PET processed in this manner has a morphology, structure, and non‐crystalline chain conformations that are quite distinct from those of as‐received PET (asr‐PET). Where possible to compare, here we find that c‐ and p‐PETs behave very similarly, but very distinctly from asr‐PET. The reorganized c‐ and p‐PETs were found to be repeatedly rapidly crystallizable from the melt with a high level of crystallinity, and in their non‐crystalline regions to have tightly packed chains predominantly adopting highly extended kink conformations, which evidence no glass‐transition behavior. What is most unusual and somewhat puzzling is that their contrasting structures, morphologies, conformations, and thermal responses were observed to be independent of melt annealing, and persisted even after holding both samples above T_m for extended periods (hours). p‐PET, which can be produced in larger quantities than c‐PET, was utilized to measure additional macroscopic properties, such as melt viscosities, densities, and the stress‐strain and thermal shrinkage of melt‐pressed films, for comparison to those of asr‐PET. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 735–746, 2007     

聚苯乙烯-b-聚2(5)-乙烯基对(间)苯二甲酸二钠嵌段共聚物的合成及其对PET结晶行为的影响

通过原子转移自由基聚合合成了线形及三臂聚苯乙烯-b-聚2(5)-乙烯基对(间)苯二甲酸二钠嵌段共聚物,通过凝胶渗透色谱、核磁共振和热失重表征证实得到了结构明确、分散度较窄的嵌段共聚物成核剂.采用熔融共混的方法制得聚对苯二甲酸乙二酯(PET)与成核剂共混样品.采用差示扫描量热仪与一维X射线衍射仪研究了PET及添加成核剂后...     

Heparin coating of poly(ethylene terephthalate) decreases hydrophobicity, monocyte/leukocyte interaction and tissue interaction

Woven poly(ethylene terephthalate) (PET) is widely used in implantable medical devices. Upon implantation, fibrinogen interacts with the PET and changes conformation, such that the fibrinogen P2 epitope may become exposed. This allows inflammatory cells to interact with the material. In this study we have coated PET with heparin and show that this decreases PET hydrophobicity and the presence of the fibrinogen P2 epitope on the material surface. In addition, we show that heparin-induced reduction of PET hydrophobicity correlates with decreased exposure of the fibrinogen P2 epitope and reduced adhesion of monocytes. Reduction of PET hydrophobicity was furthermore associated with reduced PMN elastase production and decreased interaction between PET and embryonic chicken tissue. We conclude that the heparin coating-induced decrease in PET hydrophobicity is associated with decreased interaction between PET and inflammatory cells. Independent of this interaction, the hydrophobic nature of the heparin coating is related to tissue interaction as demonstrated by a reduction in adhesion, growth and spreading of tissue on PET. The combination of these properties makes heparin coating a candidate for improving biocompatibility of PET.     

Thermal degradation investigation of poly(ethylene terephthalate)/fibrous silicate nanocomposites

Based on the fibrous silicates (palygorskite, PT) organically modified by water-soluble polyvinylpyrrolidone (PVP), poly(ethylene terephthalate) (PET) nanocomposite with good dispersion of the PT nano-particles was prepared via in situ polycondensation. The thermal degradation behavior of PET and PET/PT nanocomposite was investigated by thermogravimetric analysis (TGA) under non-isothermal conditions at various heating rates in air and nitrogen, respectively. The apparent activation energies of the samples were evaluated by Kissinger and Flynn-Wall-Ozawa method. It is suggested that, during thermal decomposition in nitrogen, the clay as a mass-transport protective barrier can slow down degradation of polymer, but the catalytic effect of metal derivatives in clays may accelerate the decomposition behavior of PET. The combination of these two effects determines the final thermal stability of nanocomposite. However, in air atmosphere, the oxidative thermal stability of PET/PT nanocomposite was obviously superior to that of pure PET.     

Rapid crystallization and thermoreversible gelation of poly(ethylene terephthalate) in polymer/oligomer binary system

Poly(ethylene terephthalate) (PET) was rapidly crystallized through thermoreversible gelation in a liquid ethylene glycol oligomer or in epoxy resin. The solutions formed gel rapidly on cooling. Polarized light microscopy and small-angle light scattering showed that these gels contain large, regular PET spherulites. The gels may be formed by two consecutive processes: the phase separation and crystallization, and gelation by formation of a three-dimensional PET network in the oligomer solvents, where the nodes of the network are PET spherulites. The crystallinity of PET recovered from polymer/oligomer gels is near 72% measured by wide-angle X-ray diffraction method, which is about 20% higher than PET samples crystallized by solution crystallization in small molecule solvent, high temperature annealing, and stretching techniques. It takes only a few minutes to form the highly crystalline phase PET in the PET/oligomer system, and the crystallinity of the dried gel is independent of the concentration of the original solution. Excimer-fluoresence and Raman spectroscopic studies indicated that PET recovered from the gels are in an ordered state with few chain entanglements. The entanglement density of the recovered PET recovered from a 20 wt % solution in ethylene glycol oligomer is as low as that of freeze-extracted PET from a 0.5 wt % solution in phenol. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1219–1225, 1998     

sPS/PET/SsPS-H共混体系的研究

以自制间规聚苯乙烯(sPS)功能化合成的磺化间规聚苯乙烯（SsPS-H)作相容剂,研究其对sPS/PET共混物微相结构与性能的影响,发现SsPS-H能够有效地改善二者的相容性,当sPS/PET/SsPS-H为85／15／2（重量比）时,冲击强度达到11．4kJ/m^2,为纯sPS的3倍,此时材料的弯曲强度为39．1MPa,下降约8％;DMA结果表明,随SsPS-H用量的增加,共混物的Tg逐渐提高;DSC分析结果表明,共混体系中sPS的熔点不受SsPS-H含量的影响,而PET的熔点在加入6份SpPS-H时明显降低。sPS在达到最大结晶速率的温度均随SsPS-H用量的增加先提而后下降。SEM观察到加入SsPS-H后,PET分散相的尺寸减小,且均匀程度增加,共混物室温下冲击断裂显著地由脆性转变为韧性,当加入6份SsPS-H后,冲击断裂又出现脆性。     

Industrially produced PET nanocomposites with enhaced properties for food packaging applications

Gas permeation of polymers is one of the important factors to be considered in the selection of materials for many packaging applications, such as modified atmosphere packaging (MAP) for foods. Poly (ethylene therephthalate) (PET) is known to exhibit very low gas permeation compared with most polymers such as polystyrene, polyethylene and polypropylene. However, MAP applications require better barrier performance than that of PET. In the present work PET trays reinforced with organically modified sepiolite, fibrillar nanoclay, have been produced at industrial processes. Permeability to water vapour, oxygen and carbon dioxide has been studied in PET nanocomposites as well as their microstructure through transmission electron and scanning electronic microscopy (TEM and SEM), and their mechanical properties. Results show a better performance in barrier properties as well as an increase in tensile strength, and impact resistance when the sepiolite content is lower than 2.5%.     

The effect of metal catalyst on the discoloration of poly(ethylene terephthalate) in thermo-oxidative degradation

Titanium-based catalyst and ethylene glycol antimony were used as catalysts to prepare poly(ethylene terephthalate) (PET), and the effect of the catalysts on the discoloration of PET in thermo-oxidative degradation was studied by UV-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR) and fluorescence spectroscopy. Hydroxylation was found during thermo-oxidative degradation of both the titanium- and antinomy-containing PETs. However, more hydroxylated products were further changed into quinonoid species in the presence of titanium catalyst, which directly results in obviously enhanced coloration of the PET. It indicates that the PET synthesized with titanium-based catalysts is more susceptible to formation of quinonoid groups and discoloration than the PET prepared with ethylene glycol antimony.