LiTi2(PO4)3的Na/Li离子交换特征

锂离子传导材料LiTi₂(PO₄)₃能在LiCl水溶液中高选择性地与Na⁺进行离子交换. 研究了NaCl 溶液中LiTi₂(PO₄)₃上的Na/Li离子交换反应, 实验结果表明, 升高温度能显著提高LiTi₂(PO₄)₃上的Na/Li交换反应速率, 其离子交换动力学规律可近似由JMAK(Johnson-Mehl-Aurami-Kalmogorav)方程描述. 对LiTi₂(PO₄)₃在水和NaCl溶液中的溶解行为的研究结果表明, 升高温度能加快其在水中的溶解速率, pH值过大或过小及离子交换都会加剧LiTi₂(PO₄)₃的溶解.     

钾掺杂g-C3N4薄膜光阳极的制备及光电催化氧化降解水中双氯芬酸钠性能

兼具高光学质量和电化学性能的薄膜光电极难以制备, 限制了光电催化氧化技术在水处理中的的应用. 本文采用原位煅烧法制备了负载在氧化铟锡(ITO)玻璃上的石墨相氮化碳(g-C₃N₄)薄膜电极, 并通过掺杂K⁺提高其光电催化氧化性能; 对电极进行了表征, 研究了其光电催化氧化降解水中双氯芬酸钠(DCF)的效率及降解路径. 结果表明, 原位煅烧法能制备出高质量的K⁺/g-C₃N₄薄膜光电极, K⁺的掺杂并未明显改变电极上g-C₃N₄的晶型、 价态和多孔形貌, 但可以提高ITO玻璃上g-C₃N₄的负载量, 增强电极对可见光的响应; K⁺的最佳掺杂浓度为0.002 mol/L, K⁺/g-C₃N₄薄膜电极光电催化氧化降解DCF的速率常数是纯g-C₃N₄薄膜电极的1.86倍; 当初始pH值为4, 电压为1 V, 光源强度为0.96 W/cm², 反应2 h后水中DCF降解率达到70%. K⁺/g-C₃N₄薄膜电极光电催化氧化过程中, 光催化氧化和电化学氧化之间存在协同作用, 两者相互增强, 并提高了反应过程中光生 空穴(h⁺)和羟基自由基(·OH)浓度, 在这两种活性物质作用下, 水中DCF分别被h⁺氧化生成咔唑衍生物、 与·OH发生加成反应生成多羟基芳香化合物, 最后开环生成小分子物质.     

LiZr4(PO4)3的Na/Li及Ag/Li离子交换

研究了LiZr2(PO4)3在水溶液中的Na/Li和Ag/Li离子交换行为.结果表明,LiZr2(PO4)3对Na+和Ag+离子均具有很高的选择性,且对Ag+的选择性高于Na+.LiZr2(PO4)3与Ag+的离子交换反应是通过形成固溶体的形式进行的,而与Na+的离子交换反应则是通过置换进行的.温度升高有利于提高LiZr2(PO4)3上Na/Li和Ag/Li的离子交换反应速度.     

介孔Ag_2S固载锰卟啉催化氧化环己烷性能研究

为了充分发挥5,10,15,20-四(4-吡啶基)锰卟啉(Mn TPyP)的催化活性和效率,用介孔硫化银对Mn TPyP进行轴向配位,形成了介孔硫化银固载5,10,15,20-四(4-吡啶基)锰卟啉(Mn TPyP/mp-Ag_2S)纳米孔仿生催化材料,用多种光谱技术对其进行表征.催化材料中S~(2-)与阳离子Mn~(3+)之间有很强的轴向配位作用,这使得催化材料催化氧化环己烷的活性大幅提高,环己烷转化率和醇酮产率分别提高了46.9%和29.6%.催化材料使用了5次后,其催化性能几乎没有下降,这归因于催化材料中强的轴向配位作用和纳米空腔结构功能作用的结果.     

Li1.3Ti1.7Al0.3(PO4)3与Na+的离子交换

锂离子传导材料Li_1.3Ti_1.7Al_0.3(PO₄)₃是具有NASICON结构的功能材料, 与Na⁺进行离子交换具有选择性高的特性. 研究了在不同温度条件下NaCl和LiCl水溶液中Li_1.3Ti_1.7Al_0.3(PO₄)₃上的Na/Li离子交换行为. 实验结果表明, 升高温度能显著提高Li_1.3Ti_1.7Al_0.3(PO₄)₃的Na/Li交换反应速率, 提高LiCl中杂质Na的分离效果.     

疏水性Cosalen/SBA-15的制备及在甲苯选择性氧化中的应用

以介孔分子筛SBA-15为载体, 先采用γ-氨丙基三乙氧基硅烷(APTES)进行氨基硅烷化修饰, 然后经甲基三乙氧基硅烷(MTES)疏水修饰后固载双水杨醛缩乙二胺合钴配合物(Cosalen). 采用傅里叶变换红外光谱、 紫外-可见漫反射光谱、 X射线光电子能谱、 元素分析、 等离子体发射光谱、 X射线衍射和氮气物理吸附等手段对制备的固载型催化剂Cosalen/SBA-15进行了物相结构和修饰程度的表征, 并考察了样品对甲苯、 苯甲醛和苯甲醇的吸附性能及在甲苯液相氧化反应中的催化性能. 结果表明, 固载型催化剂Cosalen/SBA-15的介孔结构和孔道有序性保持良好, Cosalen通过与氨基配位固载在修饰后的载体SBA-15上, 且高度分散, 氨基硅烷化和甲基修饰明显增强了其表面疏水性能, 对苯甲醛和苯甲醇的吸附量降低. 疏水性Cosalen/SBA-15协同N-羟基邻苯二甲酰亚胺(NHPI)催化甲苯液相分子氧氧化反应, 无溶剂体系在130 ℃下反应2 h, 甲苯转化率达到16.0%, 产物中苯甲醛和苯甲醇的总选择性为32.0%, 在一定程度上抑制了极性产物深度氧化为苯甲酸. 高温不利于苯甲醛和苯甲醇选择性的提高, 降低温度至110 ℃, 甲苯转化率达到12.9%时, 苯甲醛和苯甲醇的总选择性提高到43.9%.     

Potassium N‐Iodo p‐Toluenesulfonamide (TsNIK,Iodamine‐T): A New Reagent for the Oxidation of Hydrazones to Diazo Compounds

A new reagent for the oxidation of hydrazones to diazo compounds is described. N‐Iodo p‐toluenesulfonamide (TsNIK, iodamine‐T) allows the preparation of α‐diazoesters, α‐diazoamides, α‐diazoketones and α‐diazophosphonates in good yield and in high purity after a simple extractive work‐up. α‐Diazoesters were also obtained in high yield from the corresponding ketones through a one‐pot process of hydrazone formation/oxidation.     

硫酸溶液中Ce^3＋离子在PbO2电极上阳极氧化过程动力学

用“分解极化曲线”法研究ＰｂＯ２电极上Ｃｅ＾４＋阳极形成的动力学。测得电位在１．７￣１．９Ｖ（ｖｓ．ＳＣＥ）区域和高于１．９Ｖ区域的Ｏ２和Ｃｅ＾４＋的极化曲线的Ｔａｆｅｌ斜率和两者的动力学方程。推测了ＰｂＯ２电极上Ｃｅ＾４＋形成和Ｏ２析出的机理及两区域内反应机理的差别。所推得的动力学方程均与实验相符。     

Identification of the Active Sites for Low Temperature CO Oxidation over Nanocrystalline Co3O4 Catalysts

The microstructural properties of dry‐grinding derived Co₃O₄ catalysts pretreated under different atmospheres, in relation to the activities on CO oxidation were investigated. The Co₃O₄ synthesized by soft reactive grinding and pretreated with O₂ resulted in the best activity, with 100% conversion of CO at ?52 °C, superior to that of Co₃O₄ pretreated with He. To find out the active sites on Co₃O₄ for low temperature CO oxidation, the characterizations of the cobalt oxides had been investigated by means of N₂ physisorption, XRD, TEM, H₂‐TPR, CO‐titration, XPS and O₂‐TPD technologies. XPS of Co2p results show that it is difficult to ascribe the difference in catalytic performance to the surface concentration of active Co³⁺ sites. A correlation between the activity and the CO‐titration and O₂‐TPD results for Co₃O₄ reveals that a high abundance of readily accessible superficial electrophilic oxygen (O^?) species is important for achieving a high activity. Therefore, CO oxidation takes place on the surface active oxygen sites in Co₃O₄ crystallites via the suprafacial mechanism.     

Comments on “The use of MoO3 and NiO (pure or mixed) oxide catalysts in the decomposition of KMnO4” by S.A. Halawy and M.A. Mohamed

The recent paper by Halawy and Mohamed [S.A. Halawy, M.A. Mohamed, Thermochim. Acta 345 (2000) 157] has raised several problems which need to be resolved. Our comments are given under the headings of the sections of the original paper.     

The Influence of Ketones on the Formation of Symmetrical Secondary Amine: A New Method for Preparation of N, N-Bis-(dimethoxyphenylethyl)amine

InthecourseofhydrogenationofiminetoprepareDDPH,whichisanadrenoreceptorant.agonistandundergoesclinicstudyinChinanow',oneforeignmaterialN,N-Bis(dimethoxyphenylethyl)amineIwasformed(Schemel)'.IisanimportantintermediateforthepreparationofarrhythmicagentYS0353'4.Herewewouldliketoexplainitsformationandtheinfluenceofketoneonitsyield.Inschemel,whenweusedRaneyNiW,ascatalystunder40atm.H,pressure,40*nd5%Iwereobtained.Forimprovingtheyieldof2,weareattemptingtoreplaceRaneyNiW,bybasicRaneynickelto…     

Salicylaldehyde Isonicotinoylhydrazone (SAIH) as a Specific Analytical Reagent for the Selective Extractive Spectrophotometric Determination of Molybdenum (VI) in Presence of Several Cations

Abstract

An extraction study of 36 cations with SAIH into isoamyl alcohol in the presence of EDTA, ascorbic acid and IN HC10₄ showed that only Mo(VI) gave a stable yellow colored complex extractable into the organic phase. This effect was used for the selective extractive spectrophotometric determination of Mo(VI) in the presence of other tested cations.     

Vilsmeier Reagent: An Efficient Reagent for the Transformation of 2-Aminobenzamides into Quinazolin-4(3H)-one Derivatives

Clean and easy preparation of quinazolin-4(3H)-one derivatives using 2-aminobenzamides and Vilsmeier reagent is described. 2-Aminobenzamides were converted into the corresponding quinazolinones under mild and efficient conditions, in good yields without undesirable by-products.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

抗烧结Rh-Sm_2O_3/SiO_2催化剂的制备和表征及其甲烷部分氧化制合成气性能

以乙酰丙酮铑(Rh(acac)_3)和乙酰丙酮钐(Sm(acac)_3)为前驱体,用浸渍法制备了Rh/SiO_2和Rh-Sm_2O_3/SiO_2催化剂。采用原位红外光谱、热重分析、低温N_2吸附、X射线粉末衍射、高分辨透射电子显微镜、H_2-程序升温还原和X射线光电子能谱等实验技术对催化剂的制备过程,比表面积和物相以及Rh与Sm_2O_3间的相互作用进行了表征,并以甲烷部分氧化制合成气为目标反应对催化剂的稳定性进行了考察。研究表明:以Rh(acac)_3和Sm(acac)_3为前驱体采用简单的浸渍法即可制备出Rh平均粒径为2.3 nm且具有良好抗烧结性能的Rh-Sm_2O_3/SiO_2催化剂。在浸渍过程中乙酰丙酮化合物通过与SiO_2表面羟基形成氢键而负载于载体表面。Sm(acac)_3在SiO_2表面的单层负载量(质量分数)约为31%,对应于Sm_2O_3的质量分数约为15%,只要Sm(acac)_3的质量分数低于这一阈值,均可保证分解后生成的Sm_2O_3以高分散形式负载于SiO_2上,且不会因高温(800°C)焙烧而团聚。高分散于SiO_2表面的Sm_2O_3与Rh之间存在强的相互作用,可显著提高Rh的分散度,防止其在高温反应条件下烧结,进而使低Rh负载量的催化剂表现出良好的甲烷部分氧化制合成气反应活性和稳定性。     

CeO2对催化剂银物种及CO氧化性能的影响

采用共浸渍、不同分步浸渍的方法制备了8 wt% Ag/CeO2-SiO2催化剂,运用XRD、UV-Vis、BET等多种手段对催化剂的结构进行表征,考察了其对CO氧化的活性,并初步探讨了助剂CeO2对催化剂结构及活性物种的影响。实验结果表明,添加1 wt% CeO2的8 wt% Ag/SiO2催化剂表现出较好的低温CO催化活性,随后氢气预处理明显提高了催化剂的反应活性。XRD和UV-Vis谱图表明少量的CeO2（1 wt%）有利于金属银物种的形成,并且能够提高Ag粒子的稳定性,高温处理不易聚集。高CeO2负载量下的催化剂中银物种主要以银簇（ ）形式存在。     

Efficient Oxidation of Hantzsch 1,4-Dihydropyridines with Tetrabutylammonium Peroxomonosulfate Catalyzed by Manganese(III) Schiff Base Complexes: The Effect of Schiff Base Complex on the Product Selectivity

Efficient and rapid oxidation of Hantzsch 1,4-dihydropyridine with tetrabutylammonium peroxomonosulfate (TBAO) is reported. The Mn(salophen)/monopersulfate catalytic system efficiently converts 1,4-dihydropyridines (DHPs) to their corresponding pyridine derivatives under mechanical stirring and microwave irradiation in CH₂Cl₂. The ability of various Schiff base complexes to oxidize DHPs was also investigated. The results showed that in the presence of manganese Schiff complex, no by-product was obtained.     

Synthesis of Isothiocyanates Using DMT/NMM/TsO− as a New Desulfurization Reagent

Thirty-three alkyl and aryl isothiocyanates, as well as isothiocyanate derivatives from esters of coded amino acids and from esters of unnatural amino acids (6-aminocaproic, 4-(aminomethyl)benzoic, and tranexamic acids), were synthesized with satisfactory or very good yields (25–97%). Synthesis was performed in a “one-pot”, two-step procedure, in the presence of organic base (Et₃N, DBU or NMM), and carbon disulfide via dithiocarbamates, with 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium toluene-4-sulfonate (DMT/NMM/TsO⁻) as a desulfurization reagent. For the synthesis of aliphatic and aromatic isothiocyanates, reactions were carried out in a microwave reactor, and selected alkyl isothiocyanates were also synthesized in aqueous medium with high yields (72–96%). Isothiocyanate derivatives of L- and D-amino acid methyl esters were synthesized, under conditions without microwave radiation assistance, with low racemization (er 99 > 1), and their absolute configuration was confirmed by circular dichroism. Isothiocyanate derivatives of natural and unnatural amino acids were evaluated for antibacterial activity on E. coli and S. aureus bacterial strains, where the most active was ITC 9e.     

The Structure of Mn(acac)3—Experimental Evidence of a Static Jahn–Teller Effect in the Gas Phase

The structure of free manganese(III) tris(acetylacetonate) [Mn(acac)₃] was determined by mass‐spectrometrically controlled gas‐phase electron diffraction. The vapor of Mn(acac)₃ at 125(5) °C is composed of a single conformer of Mn(acac)₃ in C₂ symmetry with the central structural motif of a tetragonal elongated MnO₆ octahedron and 47(2) mol % of acetylacetone (Hacac) formed by partial thermal decomposition of Mn(acac)₃. Three types of Mn−O separations have been refined (r_h1=2.157(16), 1.946(5), and 1.932(5) Å. We have found no indication for a significant deviation of the ‐C−C−C−O−Mn−O‐ six‐membered rings from planarity, which is observed in the solid state.