Multidimensional capillary gas chromatography of polychlorinated biphenyl marker compounds

Multidimensional chromatography was used to resolve the specific chlorobiphenyl (CB) congeners 28, 52, 101, 118, 138, 153, and 180 in technical aroclor standards. Single column analysis of polychlorinated biphenyls (PCBs) results in co-elution of key congeners with other components in the mixture; therefore using two columns of different selectivity was necessary to enhance the resolution achievable on just one column. The HT8 column (8% phenylpolycarborane-siloxane phase) has been reported to have specific selectivity characteristics for improved PCB separation. When coupled with a BPX5 column (5% phenylpolysiloxane-silphenylene phase), it has been shown here to provide unambiguous identification of 7 marker compounds which are used to monitor PCB occurrence and distribution. All seven marker CBs are present in aroclor 1254, and by adjusting the size of the heartcut window, it was possible to obtain resolution of the marker congeners from other congeners. Single column analysis is unable to achieve this result. This offers an alternative to GC-MS analysis.     

Comprehensive two-dimensional gas chromatography of the 209 polychlorinated biphenyls

Comprehensive two-dimensional gas chromatography (GC x GC) of the 209 polychlorinated biphenyls (CBs) was carried out using a longitudinally modulated cryogenic system (LMCS) and liquid carbon dioxide as cryogen. The effluent from a non-polar column was modulated and further separated on either a polar or a shape-selective second-dimension column. Five GC x GC column combinations were evaluated, with DB-XLB as the first column in each case. DB-XLB separates more congeners than any other GC column currently available. When combined with a biscyanopropyl siloxane (SP-2340 or BPX70) or smectic liquid crystal (LC-50) second-dimension column in a GC x GC system many additional CBs can be separated. In total, 176 and 181 of the 209 congeners were separated (Rs = 0.5) on the column combinations DB-XLB/SP-2340 and DB-XLB/LC-50, respectively. Of the 136 CBs present in any Aroclor mixture at concentrations greater than 0.05% (w/w), 126 were resolved using either of these two column combinations. The seven frequently measured CBs 28, 52, 101, 118, 138, 153, 180, and the WHO-PCBs 77, 81, 105, 114, 118, 123, 126, 156. 157, 167, 169 and 189 were all separated from Aroclor CBs on the DB-XLB/LC-50 column set, whereas CBs 118 and 131 coeluted on the DB-XLB/SP-2340 column set. In addition, three technical CB formulations (Aroclors 1232, 1248 and 1260) and a seal blubber sample (Halichoerus grypus) from the Baltic Sea were analyzed. Similar peak patterns were found for Aroclor 1260 and the CBs in the seal blubber, facilitating use of this technical CB formulation to identify the CBs in the blubber by GC x GC. Individual CBs in environmental samples, such as seal blubber, may be identified semi-automatically by matching the samples GC x GC profiles to a template generated using a standard containing all 209 CBs. Using such a template, 64 CBs were identified in the grey seal blubber sample.     

Enhanced comprehensive two-dimensional gas chromatographic resolution of polychlorinated biphenyls on a non-polar polysiloxane and an ionic liquid column series

A total of 196 out of 209 polychlorobiphenyl (PCB) congeners were resolved using GC×GC-TOFMS with a non-polar/ionic liquid column series consisting of poly(50%-n-octyl-50%-methyl)siloxane and (1,12-di(tripropylphosphonium)dodecane bis(trifluoromethansulfonyl)amide) in the first and second dimension, respectively. It has been found that 13 PCB congeners overlap in five doublets (CB12+CB13, CB62+CB75, CB70+CB76, CB97+CB125 and CB153+CB168) and one triplet (CB90+CB101+CB113). All toxic, "dioxin like" congeners were separated with no interferences from any PCB congener. The 109 PCBs present in Aroclor 1242 and the 82 PCBs present in Aroclor 1260 were resolved GC×GC-TOFMS analysis on this column set.     

Determination of atropisomeric and planar polychlorinated biphenyls, their enantiomeric fractions and tissue distribution in grey seals using comprehensive 2D gas chromatography

High prevalence of uterine occlusions and sterility is found among Baltic ringed and grey seal. Polychlorinated biphenyls (CBs) are suspected to be the main cause. The CB concentrations are higher in affected than in healthy animals, but the natural variation is considerable. Thus, it might be possible to assess the health status of seals by CB analysis. The ratios of chiral compounds (enantiomeric fractions (EFs)) such as atropisomeric CBs are of particularinterest, since these may reflect differences in metabolic rates. An analytical procedure was developed and used to determine the levels of atropisomeric CBs, planar-CBs (WHO-PCBs) and total CBs in seals of different health status. Comprehensive 2D gas chromatography (GC x GC) was used to separate the target analytes from other CBs and interferences and a micro electron-capture detector (microECD) was used for detection. EFs of the atropisomeric CBs were difficult to determine as the levels were low and the interferences many. Two column combinations bad to be used to avoid biased results-both had a chiral column as first-dimension column. The second-dimension column was coated with either a high-polarity cyanopropyl or a liquid crystal phase. EFs were determined for five atropisomeric CBs, i.e. CBs 91,95, 132, 149 and 174. The results were verified by GC x GC-time-of-flight mass spectrometry (TOF-MS). Some atropisomeric CBs had EFs that deviated strongly from the racemic-mixture value. The deviations were larger in liver than blubber, which indicates enantioselective metabolism. However, there was no selective passage of the studied atropisomeric CBs across placenta and no selective blood-brain barrier. Similarly, no correlation between EFs and health status was observed, although there was a correlation between the total CB levels and health status.     

Enantiomeric separation of chiral polychlorinated biphenyls on beta-cyclodextrin capillary columns by means of heart-cut multidimensional gas chromatography and comprehensive two-dimensional gas chromatography. Application to food samples

Three commercially available chiral capillary columns, Chirasil-Dex, BGB-176SE, and BGB-172, have been evaluated for the separation into enantiomers of the 19 chiral polychlorinated biphenyls (PCB) congeners stable at room temperature. The enantiomers of 15 chiral PCBs were, at least to some extent, separated using these beta-cyclodextrin based columns. Multidimensional techniques, such as heart-cut multi-dimensional gas chromatography (heart-cut MDGC) and comprehensive two-dimensional gas chromatography (GC x GC), were investigated for their ability to solve coelution problems with other PCBs present in commercial mixtures and real-life samples. Heart-cut MDGC improved the separation as compared to one-dimensional GC, and enantiomeric fractions of the investigated chiral PCBs could be determined free from interferences. However, limitations on the number of target compounds that can be transferred to the second column in a single run and, therefore, the time consumption, have led to the evaluation of GC x GC as an alternative for this type of analysis. With GC x GC, two column set-ups were tested, both having a chiral column as first-dimension column, and two different polar stationary phase columns in the second dimension. On using both column combinations, congeners 84, 91, 95, 132, 135, 136, 149, 174, and 176 could be determined free from coelutions with other PCBs. Results on the application of heart-cut MDGC to food samples such as milk and cheese are given, as well as the first results on the application of GC x GC to this type of samples.     

Study of a monolithic silica capillary column coated with poly(octadecyl methacrylate) for the reversed-phase liquid chromatographic separation of some polar and non-polar compounds

The performance of a monolithic silica capillary column coated with poly(octadecyl methacrylate) (ODM column) for the reversed-phase liquid chromatographic separation of some polar and non-polar compounds was studied, and the results were compared to those obtained by using a monolithic silica capillary column modified with octadecylsilyl-(N,N-diethylamino)silane (ODS column). Benzene and naphthalene derivatives, polycyclic aromatic hydrocarbons (PAHs), steroids, alkyl phthalates, and tocopherol homologues were used as test samples. In general, compounds with aromatic character, rigid and planar structures, and lower length-to-breadth ratios (more compacted structures) seem to have more preference for the polymer coated stationary phase (ODM). Compounds with acidic character have also a higher retention on ODM columns because of the presence of ester groups in the stationary phase. The polymer coated column allowed the separation of some PAHs, alkyl phthalates, steroids, and of beta- and gamma-tocopherol isomers which cannot be separated under the same conditions on ODS columns, while keeping similar column efficiency. These results allowed to suggest ODM columns as a good alternative to conventional ODS columns for reversed-phase liquid chromatography.     

Retention-index based vapor pressure estimation for polychlorobiphenyl (PCB) by gas chromatography

Summary Vapor pressures for 133 individual polychlorobiphenyl congeners as subcooled liquids were determined by two different approaches on the basis of gas-chromatographic retention indices obtained with two different non-polar stationary phases. The approach which is based on the retention indices obtained on a methyl-50% octyl polysiloxane phase (SB Octyl 50) and on reference vapor pressures of PCB congeners, and thus contains less approximations, should yield more accurate results than the method which uses retention indices obtained on a methyl polysiloxane phase (OV 101) and reference vapor pressure data taken from the n-alkanes of the retention index system. A systematic deviation is observed between the values obtained by the two different methods. The first method gives constantly slightly higher values for the vapor pressure. This will be caused by the different separation characteristics of the two non-polar stationary phases used, as well as by uncertainties in the reference data for the vapor pressure calculations.     

Determination of polychlorinated biphenyls in human blood plasma by on-line and off-line liquid chromatography–gas chromatography

A method for the determination of non-, mono- and di-ortho substituted polychlorinated biphenyls in human blood plasma is presented. The non-ortho CBs are isolated from the bulk of PCBs by HPLC on a dinitroanilino-propyl silica column and collected as a heart-cut fraction that is transferred on-line to GC-MS utilizing concurrent solvent evaporation technique. The on-line coupling serves to lower the limit of determination and to partly automate the sample clean-up. The di- and mono-ortho CBs are analyzed by off-line GC-ECD using two different columns. Sample pre-treatment is performed by extraction with organic solvents and fractionation on silica gel. A high reproducibility and an absolute over-all recovery of approximately 70 % is demonstrated. The method is applied to samples of blood from 5 individuals. All the samples demonstrated a similar relative concentration profile. It was also shown that three CB congeners (CB 126, CB 156 and CB 170) contributed to the major part of the toxic equivalent quantity of the PCB content in the blood.     

HPLC retention behaviors of poly-aromatic-hydrocarbones on Cu(II)-octabromotetrakis(4-carboxyphenyl)porphine derivatives-immobilized aminopropyl silica gels in polar and non-polar eluents

As one of approaches of developing novel HPLC stationary phases, we prepared Cu-octabromotetrakis(4-carboxyphenyl)porphine derivative-immobilized silica gels (Cu-OBTCPP(D)), and evaluated the availability of the resultant Cu-OBTCPP(D) as a stationary phase for separation of poly-aromatic-hydrocarbons (PAHs) and their related compounds. A Cu-OBTCPP(D) column was revealed to have an ability to separate simple PAHs and be useful as a stationary phase in both polar and non-polar eluents. The retention property of the Cu-OBTCPP(D) column was evaluated in various comparative experiments using commercially available columns. In comparison with 2-(1-pyrenyl)ethyl dimetylsilyl silica gel column (PYE column) regarding the retention behavior for PAHs etc., the Cu-OBTCPP(D) column showed stronger interactions involving pi electron in non-polar eluent than PYE column. In comparison with a pentabromobenzyloxy propylsilyl silica gel column (PBB column) regarding the influence of bromination, the Cu-OBTCPP(D) column was affected differently from the PBB column. In comparison with nitrophenylethyl silica gel column (NPE column) regarding the retention behavior for compounds having a dipole in a non-polar eluent, the Cu-OBTCPP(D) column showed electrostatic interactions such as dipole-dipole interaction equivalent to or larger than the NPE column.     

Trace analysis of polychlorinated dibenzo-p-dioxins, dibenzofurans and WHO polychlorinated biphenyls in food using comprehensive two-dimensional gas chromatography with electron-capture detection

Trace analysis of 2,3,7,8-polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and the 12 WHO-PCBs (four non-ortho and eight mono-ortho congeners that have been assigned toxic equivalence factors, TEFs, by the World Health Organisation) was conducted by comprehensive two-dimensional gas chromatography with a micro electron-capture detector (GC x GC-microECD). Four food matrices (fish oil from herring, spiked cows' milk, vegetable oil and an eel extract) were analysed by two GC x GC laboratories, and four GC-HRMS laboratories generated reference values. The two GC x GC laboratories used different column combinations for separating the target analytes. For the first dimension, non-polar DB-XLB and VF-1 columns were used, and for the second dimension, an LC-50 liquid crystalline column with unique selectivity for planar compounds. The congener-specific and total toxic equivalence (TEQ) data obtained using DB-XLB x LC-50 were in good agreement with results obtained by the GC-HRMS laboratories. The WHO-PCB data obtained with the VF-1 x LC-50 combination was also good, but the PCDD/F concentrations were sometimes overestimated due to matrix interferences. GC x GC-microECD using DB-XLB x LC-50 seems to fulfil the European Community requirements of a screening method for PCDD/F and WHO-PCB TEQ in food.     

Using the liquid nature of the stationary phase in counter-current chromatography V. The back-extrusion method

The main feature of counter-current chromatography (CCC) is that the stationary phase is a liquid as well as the mobile phase. The retention volumes of solutes are directly proportional to their distribution coefficients K(D) in the biphasic liquid system used in the CCC column. Solutes with high K(D) coefficients are highly retained in the column. The back-extrusion method (BECCC) uses the fact that the liquid stationary phase, that contains the retained solutes, can be easily moved. Switching the column inlet and outlet ports without changing the liquid phase used as the mobile phase causes the rapid collapse of the two immiscible liquid phases inside the column, the previously stationary phase being gathered at the new column outlet. Then this previously stationary liquid phase is extruded outside the CCC column carrying the retained solutes. The back-extrusion method is tested with a standard mixture of five compounds and compared with the recently described elution-extrusion method. It is shown that the chromatographic resolution obtained during the back-extrusion step is good because the solute band broadening is minimized as long as the solute is located inside the "stationary" phase. However, a major drawback of the BECCC method is that all solutes are split between the liquid phases according to their distribution ratios when the CCC column equilibrium is broken. The change of flowing direction should be done after a sufficient amount of mobile phase has flushed the column in the classical mode, eluting solutes with small and medium distribution ratios. Otherwise, a significant portion of the solutes will stay in the mobile phase inside the column and produce a broad peak showing after the stationary phase extrusion.     

Chiral comprehensive two-dimensional gas chromatography with electron-capture detection applied to the analysis of chiral polychlorinated biphenyls in food samples

The feasibility of comprehensive two-dimensional gas chromatography with electron-capture detection (GC x GC-ECD) for the enantioseparation of chiral PCBs from other possible interfering compounds has been evaluated. Three commercially available enantioselective beta-cyclodextrin-based capillary columns (Chirasil-Dex, BGB-172 and BGB-176SE) have been tested as first-dimension columns. Three non-enantioselective stationary phases (HT-8, BPX-50 and Supelcowax-10) were combined with the enantioselective columns to allow the unambiguous determination of the enantiomers of the target chiral PCBs. Each enantioselective first-dimension column tested was able to separate into enantiomers different PCB congeners, but in all cases, the use of Supelcowax-10 as second-dimension column provided the most satisfactory results. The Chirasil-Dex x Supelcowax-10 column combination allowed the determination of the enantiomeric fraction (EF) of PCBs 84, 91, 95, 132, 136, 149, 174 and 176 in the working standard solution, while that of congener 135 was hindered. The BGB-172 x Supelcowax-10 column set allowed a proper EF determination of congeners 45, 84, 131, 132, 135, 171, 174 and 183, while that of PCB 91 was interfered with co-elutants. The column combination BGB-176SE x Supelcowax-10 allowed the determination of all congeners that this enantioselective stationary phase was able to separate into enantiomers, i.e. PCBs 45, 91, 95, 136, 149 and 176. These column combinations have also been evaluated for the simultaneous determination of the 12 congeners with a toxic equivalency factor assigned by the WHO (PCBs 77, 81, 105, 114, 118, 123, 126, 156, 157, 167, 169, 189) and the seven indicator congeners (PCBs 28, 52, 101, 118, 138, 153 and 180), and evaluated for the analysis of food samples.     

Gas chromatographic separation of polychlorinated biphenyls on a new apolar capillary column

Eighty one polychlorinated biphenyls (PCBs) and nineteen chlorinated pesticide standards have been analyzed on a newly developed apolar high resolution gas chromatography (HRGC) column. Emphasis was placed on the determination of PCB indicator congeners which are part of national regulations, and of toxic coplanar PCB congeners. The new column enables almost unambiguous quantification of the PCB indicator congeners (PCB 138 can be separated from both PCB 163 and PCB 164; PCB 28 and PCB 31 were also separated and no coelution was observed for PCB 52, PCB 118, and PCB 180). The new column furnished better results than CP-Sil 8 for the analysis of PCB indicator congeners in a sample of seal blubber.     

Interlaboratory studies of the determination of selected chlorobiphenyl congeners with capillary gas chromatography using splitless- and on-column injection techniques

The Community Bureau of Reference has organized a collaborative interlaboratory project to improve the analytical protocol for some specific chlorobiphenyls (CBs) within the European Community (EC). A series of test procedures were prescribed to optimize the gas chromatographic conditions for splitless and on-column injection, which substantially improved the quality of data. Important parameters included the initial column and injector temperatures and the choice of the polarity of the stationary phase. In a study with cleaned eel-fat extracts, coefficients of variation for reproducibility CV(R) ranging from 11 to 24% at the 0.04–0.3 mg/kg level per CB congener were obtained. No significant difference could be found between splitless- and on-column injection.     

氮杂冠醚聚硅氧烷固定液的色谱保留机理

氨杂冠醚聚硅氧烷是一类呈中等极性的新颖气相色谱固定液．本文通过测定醇、酯、卤代烃和苯系列化合物的色谱保留值和相应势力学参数，研究它对上述不同化合物的保留机理及其分子识别的热力学性质     

Preparation and Characterization of Sol-Gel SE-30-Coated Silica Stationary Phase for Capillary Liquid Chromatography

A sol-gel chemistry-based polymer coating approach was developed for the preparation of a novel polysiloxane-coated silica stationary phase for capillary liquid chromatography. SE-30, a commercial polysiloxane stationary phase used in gas chromatography, was incorporated into the properly designed sol solution. Then the sol-gel mixture was introduced into a silica gel-packed capillary column by pressure. A thin film of sol-gel SE-30-coating is chemically bonded to the surface of silica gel particles by hydrolytic polycondensation under mild conditions without any free radical cross-linking procedures, therefore the sol-gel approach offers a simple and effective pathway to create a hybrid polymer-coated silica stationary phase. Various factors affecting column making were optimized and discussed in this report. The resulting stationary phase showed good permeability, mechanical robustness, high durability to alkaline mobile phase and satisfactory chromatographic performance in separations of polar and non-polar aromatic compounds. Linear solvation energy relationships (LSERs) studies indicate that the stationary phase has a reversed-phased character with SE-30 providing chromatographic functionality. The solute size and the solute hydrogen bond ability are major factors that principally govern the retention of test solutes.     

Covalently bonded polysaccharide-modified stationary phase for per aqueous liquid chromatography and hydrophilic interaction chromatography

The mixed sulfated/methacryloyl polysaccharide derivative was prepared and successfully immobilized onto the surface of porous silica particles by polymerization. Polysaccharide derivative was calculated as 10.33% in the stationary phase prepared. The new stationary phase (PMSP) showed both hydrophilic interaction (HILIC) and per aqueous liquid chromatography (PALC) characteristics. The effects of column temperature, the water content, pH and ion strength of mobile phase on the retention time of test compounds in highly aqueous eluents were investigated to evaluate the PALC features of PMSP. The column efficiency is about 31,000 plates/m for benzoic acid in water/ACN (97/3, v/v) mobile phase at a flow rate of 1.0 mL/min. Compared with C18 column, the PMSP had shorter retention time for weak polar and non-polar compounds, but also showed stronger retention for strong polar compounds. It indicated that PALC was a suitable mode of chromatography as replacement of HILIC and complementarity of reversed-phase liquid chromatography (RPLC).     

Retention mechanism of poly(ethylene oxide) in reversed-phase and normal-phase liquid chromatography

The retention behavior of low- and high-molecular-mass poly(ethylene oxide) (PEO) in reversed-phase (RP) and normal-phase (NP) liquid chromatography was investigated. In RPLC using a C18 bonded silica stationary phase and an acetonitrile-water mixture mobile phase, the sorption process of PEO to the stationary phase showed deltaH(o) > 0 and deltaS(o) > 0. Therefore, PEO retention in RPLC separation is an energetically unfavorable, entropy-driven process, which results in an increase of PEO retention as the temperature increases. In addition, at the enthalpy-entropy compensation point the elution volume of PEO was very different from the column void volume. These observations are quite different from the RPLC retention behavior of many organic polymers. The peculiar retention behavior of PEO in RPLC separation can be understood in terms of the hydrophobic interaction of this class of typical amphiphilic compounds with the non-polar stationary phase, on the one hand, and with the aqueous mobile phase, on the other. The entropy gain due to the release of the solvated water molecules from the PEO chain and the stationary phase is believed to be responsible for the entropy-driven separation process. On the other hand, in NPLC using an amino-bonded silica stationary phase and an acetonitrile-water mixture mobile phase, PEO showed normal enthalpy-driven retention behavior: deltaH(o) < 0 and deltaS(o) < 0, with the retention decreasing with increasing temperature and PEO eluting near the column void volume at the enthalpy-entropy compensation point. Therefore, high-resolution temperature gradient NPLC separation of high-molecular-mass PEO samples can be achieved with relative ease. The molecular mass distribution of high-molecular-mass PEO was found to be much narrower than that measured by size-exclusion chromatography.     

Comparison of different high-performance liquid chromatographic systems for the purification of adrenal and gonadal steroids prior to immunoassay

The high-performance liquid chromatography of nineteen hormonal steroids with special respect to its suitability for routine purification of these steroids from crude, organic extracts of biological fluids prior to final quantitation by immunoassay has been studied. In all systems the gradient elution technique was applied. Separation of steroids has been investigated using different stationary phases chemically coated with non-polar, hydroxyl, NO2 and CN groups. Reproducibility of retention times was studied on a stationary phase coated with hydroxyl groups (DIOL column) using different organic eluents. Coefficients of variation range from 0.76 to 8.16%. Reproducibility was shown to be unequivocally better in the gradient part than in the isocratic part of the chromatographic run. In contrast to the other steroids, 18-hydroxylated steroids were more or less unstable in certain systems studied. As to resolution and reproducibility, the DIOL column run with an n-hexane-dioxane gradient has been shown to be superior to the other systems studied.