DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Five-dimensional incommensurate structure of the melilite electrolyte [CaNd]2[Ga]2[Ga2O7]2

Melilite-type gallium oxides are potential intermediate temperature electrolytes for solid oxide fuel cells. Single crystals of [CaNd](2)[Ga](2)[Ga(2)O(7)](2) grown using an optical floating zone furnace have been investigated using transmission electron microscopy and powder and single-crystal X-ray diffraction. The anion array topologically conforms to a [(3.5.4.5)(2), 3.5.3.5] network that contains distorted pentagonal tunnels. The distortion is necessary to achieve space filling and accommodate structural misfit between the layers. Satisfactory bond lengths and angles are obtained through two-dimensional modulation in the tetragonal based plane, leading to five-dimensional symmetry in the superspace group P(4?)2(1)m(α,α,0)00s((a?)a,0)000, α = 0.2319(2), with modulation vectors q(1) = α(a* + b*) and q(2) = α(-a* + b*). Both displacive and occupational modulations are found. Through this mechanism, melilites are primed to accommodate mobile oxygen interstitials, suggesting a rational approach to crystallochemical tailoring that will enhance ionic diffusion and optimize electrolyte performance.     

Self-assembly of Novel Hetero[3]rotaxane,[2]Rotaxanes and [2]Catenane

One linear template 13 and one cyclophane template 15, both incorporating two electron rich 1,4-dialkoxybenzene units and one diamide unit, have been synthesized. By utilizing donor-acceptor interaction and/or intermolecular hydrogen bonding assembling principles, one novel hetero[3]rotaxane 22·4Cl, possessing one neutral and one tetracationic ring components, has been synthesized from 13, through neutral [2]rotaxane 21 as intermediate. With 15 as template, tetracationic [2]catenane 23·4PF6 was assembled by using donor-acceptor interaction, but no neutral [2]rotaxane could be obtained under the typical conditions of hydrogen bonding assembling principle. The interlocked supramolecular compounds have been characterized and their spectral properties are investigated.     

Cyclo[2]carbazole[2]pyrrole: a preorganized calix[4]pyrrole analogue

A cyclo[2]carbazole[2]pyrrole (2) consisting of two carbazoles and two pyrroles has been synthesized by directly linking the carbazole 1- and 8-carbon atoms to the pyrrole α-carbon atoms. Macrocycle 2 is an extensively conjugated 16-membered macrocyclic ring that is fixed in a pseudo-1,3-alternate conformation. This provides a preorganized anion binding site consisting of two pyrrole subunits. ¹H NMR spectroscopic analysis revealed that only the two diagonally opposed pyrrole NH protons, as opposed to the carbazole protons, take part in anion binding. Nevertheless, cyclo[2]carbazole[2]pyrrole 2 binds representative anions with higher affinity in CD₂Cl₂ than calix[4]pyrrole (1), a well-studied non-conjugated tetrapyrrole macrocycle that binds anions via four pyrrolic NH hydrogen bond interactions. On the basis of computational studies, the higher chloride anion affinity of receptor 2 relative to 1 is rationalized in terms of a larger binding energy and a lower host strain energy associated with anion complexation. In the presence of excess fluoride or bicarbonate anions, compound 2 loses two pyrrolic NH protons to produce a stable dianionic macrocycle [2–2H]²⁻ displaying a quenched fluorescence.

Less is more: two NH hydrogen bond donors in a preorganized receptor provide greater anion affinity than the four NH moieties present in the classic anion receptor, calix[4]pyrrole.     

Charge transfer chromophore-stopped [2]rotaxane through [2 + 2] cycloaddition

Three charge-transfer chromophore-terminated [2]rotaxanes were synthesized, using a high-yield [2 + 2]cycloaddition reaction in apolar solvent at room temperature. Two solvent-driving molecular shuttles were constructed, which exhibit distinct conformations in different solvent as a result of the shuttling movement of the macrocycle.     

Zur Kenntnis von Li2[CuO2] [1, 2]

On Li₂[CuO₂] At the first time single crystals of Li₂[CuO₂] are prepared by exchange reaction. The crystal structure (I mmm) with a = 365.4(0), b = 285.9(0), c = 937.4(0) pm, Z = 2, d_x = 3.73 g/cm³, d_pyk = 3.67 g/cm³ was refined (four-circle-diffractometer data PW 1100, 343 I_o(hkl), MoKα, R = 0.046, R_w = 0.041). The characteristic structure element is the planar chain \documentclass{article}\pagestyle{empty}\begin{document}$ {}_\infty ^1 \left[{{\rm CuO}_{4/2}} \right]^{2 -} $\end{document}. The Madelung Part of Lattice Energy, MAPLE, Effective Coordination Numbers, ECoN, these via Mean Fictive Ionic Radii, MEFIR, are calculated.     

Calix[2]bipyrrole[2]furan and calix[2]bipyrrole[2]thiophene: new pyrrolic receptors exhibiting a preference for carboxylate anions

Heterocycles other than pyrrole, specifically bipyrrole, furan, and thiophene, have been used to construct two new, calixpyrrole-like anion receptors; binding studies, carried out by ITC in CH3CN, reveal a selectivity for "Y-shaped" anions, such as benzoate, over spherical ones, such as chloride.     

Intramolecular ketenimine-ketenimine [2 + 2] and [4 + 2] cycloadditions

Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.     

Die Kristallstrukturen von [Et3PNAsPh3]2[Ag2Br4] und [Et3PNAsPh3]2[Pd2Br6]

Crystal Structures of [Et₃PNAsPh₃]₂[Ag₂Br₄] and [Et₃PNAsPh₃]₂[Pd₂Br₆] Colourless single crystals of [Et₃PNAsPh₃]₂[Ag₂Br₄]( 1 ) and red single crystals of [Et₃PNAsPh₃]₂[Pd₂Br₆]( 2 ) have been isolated from saturated solutions in acetonitrile of equivalent mixtures of [Et₃PNAsPh₃]Br with AgBr and PdBr₂, respectively. Both complexes were characterized by IR spectroscopy and by crystal structure determinations. 1 : Space group P1¯, Z = 1, lattice dimensions at ‐70°C: a = 985.0(2), b = 1042.2(5), c = 1345.8(5) pm, α = 102.88(2)°, β = 105.73(2)°, γ = 94.94(2)°, R₁ = 0.0577. 2 : Space group P2₁/c, Z = 2, lattice dimension at ‐70°C: a = 1003.0(1), b = 1371.8(2), c = 1974.0(1) pm, β = 93.30(1)°, R₁ = 0.0458. The dimeric anions of 1 and 2 form planar, centrosymmetric complex units.     

Efficient post-macrocyclization functionalizations of oxacalix[2]arene[2]pyrimidines

Diversely functionalized oxacalix[2]arene[2]pyrimidines have been synthesized starting from a bis(methylsulfanyl)-substituted oxacalix[4]arene by two efficient post-macrocyclization pathways. Functionalized aryl groups were introduced on the pyrimidine building block via Liebeskind-Srogl cross-coupling reactions, while a variety of O-, S-, N-, and C-nucleophiles were inserted on the calixarene skeleton by nucleophilic aromatic substitution reactions on the bis(methylsulfonyl)oxacalix[4]arene analogue.     

Construction of a hetero pseudo[2]rota[2]catenane

A novel ammonium template containing three ammonium sites was synthesized. Two ammoniums located on the linear component served as template for cucurbit[6]uril to form the CB-based pseudo[2]rotacane while another one located on the macrocyclic component played a role of template for clipping reaction. As a result of a ‘‘threading-followed-by-clipping' approach, a novel hetero pseudo[2]rota[2]catenane was successfully constructed.     

Self-assembly of heteroleptic [2 x 2] and [2 x 3] nanogrids

Using the HETPHEN concept a general and quantitative approach to the formation of heteroleptic nanogrids is illustrated.     

[2 + 2]-Cycloreversions

Four-membered rings can be cleaved thermally, Photochemically, or catalytically into two π bonded fragments. Theoretical calculations, kinetic studies, and investigations of stereo- and regioselectivity have been undertaken to clarify the question of whether the reaction involves one or two steps and to permit predictions on its course. [2 + 2]-Cycloreversions have been used to clarify the structure of four-membered rings, to prepare highly reactive π electron-systems and–in combination with a [2 + 2]-cycloaddition–to protect double bonds. The combination of a cycloaddition and-reversion can be used to convert a carbonyl group into an olefin. Starting with compounds containing annelated four-membered rings, compounds with two functional groups or large ring systems can be prepared. [2 + 2]-Cycloreversions have also been discussed in connection with storage of solar energy.