Thermal decomposition of copolymers from ethylene with some vinyl derivatives

The thermal degradation of ethylene-vinyl acetate (EVA), ethylene-vinyl-3,5-dinitrobenzoate (EVDNB) and ethylene-vinyl alcohol (EVAL) copolymers have been studied using differential thermal analysis (DTA) and thermogravimetry (TG) under isothermal and dynamic conditions in nitrogen. Thermal analysis indicates that EVA copolymers are thermally more stable than EVDNB samples. The degradation of the copolymers considered occurs as an additive degradation of each component polyethylene (PE) and poly(vinyl acetate) (PVA), poly(vinyl-3,5-dinitrobenzoate) (PVDNB) or poly(vinyl alcohol) (PVAL). The apparent activation energy of the decomposition was determined by the Kissinger and Flynn-Wall methods which agree well.     

Equation-of-state properties and surface tension of ethylene-vinyl alcohol random copolymers

Pressure-volume-temperature (PVT) data were studied for ethylene-vinyl alcohol random copolymers (EVOH) and served to determine bulk reduction parameters for the equation-of-state by Flory-Orwoll-Vrij. The compressibility factor as a function of copolymer composition displays positive deviation from additivity. Sessile drop method yielded surface tensions of EVOH melts at different temperatures. To a good approximation linear variation of surface tension with respect to copolymer composition was observed. It indicates that conformational restrictions prevent surface excess of the low-energy units. Results on surface tensions are discussed in terms of different theoretical approaches. It turns out that the parachor approach is in excellent agreement with experimental data. The corresponding state approximation revealed decreasing surface energy with ascending ethylene content whereas the surface entropy remains approximately constant as long as vinyl alcohol units are in excess.     

15个乙烯—乙烯基化合物共聚物的取代基参数

本文应用取代基参数（ＳＣＳ）方法处理了１５个ＥＶ共聚物的＾１３ＣＮＭＲ谱，它们是：（１）乙烯α－烯烃共聚物，即乙烯－丙烯共聚物，乙烯－丁烯－１共聚物，乙烯４－甲基－１－戊烯共聚物，乙烯－己烯－１共聚物和乙烯－辛烯－１共聚物；（２）乙烯－含氧乙烯共聚物，即乙烯－甲基丙烯酸Ｎ，Ｎ－二甲基胺乙酯共聚物，乙烯－丙烯酸甲酯共聚物，乙烯－丙烯酸共聚物，乙烯－乙酸乙烯酯，乙烯－乙烯醇，乙烯－一氧化碳共聚物（ＥＣ     

Blends of synthetic and natural polymers as special performance materials

The interest for blends of synthetic and natural polymers is growing and several applications in many different fields are now becoming evident. The biological-synthetic polymers interactions play a relevant role in controlling the mechanism that constitutes the basis of biocompatibility of materials used in medicine. This work concerns with the preparation and chemico-physical and mechanical characterization of blends in which the biological component is hyaluronic acid or its benzyl ester derivatives, and the synthetic component is poly(vinyl alcohol) or ethylene-vinyl alcohol copolymers.     

Versatile multilayer thin film preparation using hydrophobic interactions, crystallization, and chemical modification of poly(vinyl alcohol)

Multilayer thin film coatings were prepared on silicon substrates. Poly(vinyl alcohol) was adsorbed from aqueous solution to propyldimethylsilyl-modified silicon wafers. This thin semicrystalline coating was chemically modified using acid chlorides to form thicker, hydrophobic coatings. The products of the modification reactions allowed adsorption of a subsequent layer of poly(vinyl alcohol) that could subsequently be hydrophobized. This two-step process (adsorption/chemical modification) allows layer-by-layer deposition to prepare coatings with thickness, chemical structure, and wettability control.     

Glycopolymers resultant from ethylene-vinyl alcohol copolymers: Degradation and rheological behavior in bulk

The physical properties of glycopolymers based on d-(+)-glucosamine, d-(+)-galactosamine and d-(+)-mannosamine derivatives and obtained from two ethylene-vinyl alcohol, EVOH, copolymers with different vinyl alcohol compositions have been analyzed. The thermal degradation of these glycopolymers is almost independent of the type and amount of saccharide incorporated but slightly dependent on the initial EVOH copolymer composition. The glycopolymers derivate from the EVOH copolymer with lower ethylene content present two relaxation processes, while those derivatives from the EVOH copolymer with lower vinyl alcohol composition essentially show three relaxations processes. In both sets of glycopolymers, the relaxation process associated with the cooperative motions that take place at the glass transition is located at analogous temperatures to those previously determined by differential scanning calorimetry, both results being rather consistent.     

Adsorption of poly(vinyl alcohol) from water to a hydrophobic surface: effects of molecular weight, degree of hydrolysis, salt, and temperature

The adsorption of poly(vinyl alcohol) (PVOH) from aqueous solutions to a silicon-supported fluoroalkyl monolayer is described. Thickness, wettability, and roughness of adsorbed films are studied as a function of polymer molecular weight, degree of hydrolysis (from the precursor, poly(vinyl acetate)), polymer concentration, salt type and concentration, and temperature. The data suggest a two-stage process for adsorption of the polymer: physisorption due to a hydrophobic effect (decrease in interfacial free energy) and subsequent stabilization of the adsorbed layer due to crystallization of the polymer. Adsorption of lower-molecular-weight polymers results in thicker films than those prepared with a higher molecular weight; this is ascribed to better crystallization of more mobile short chains. Higher contents of unhydrolyzed acetate groups on the poly(vinyl alcohol) chain lead to thicker adsorbed films. Residual acetate groups partition to the outermost surface of the films and determine wettability. Salts, including sodium chloride and sodium sulfate, promote adsorption, which results in thicker films; at the same time, their presence over a wide concentration range leads to formation of rough coatings. Sodium thiocyanate has little effect on PVOH adsorption, only slightly reducing the thickness in a 2 M salt solution. Increased temperature promotes adsorption in the presence of salt, but has little effect on salt-free solutions. Evidently, higher temperatures favor adsorption but cause crystallization to be less thermodynamically favorable. These competing effects result in the smoothest coatings being formed in an intermediate temperature range.     

Thermal analysis and FT‐IR studies of adsorbed poly(ethylene‐stat‐vinyl acetate) on silica

Adsorbed poly(ethylene‐stat‐vinyl acetate) (PEVAc) on fumed silica was studied using temperature‐modulated differential scanning calorimetry (TMDSC) and FT‐IR spectroscopy. The properties of the copolymers were compared with poly(vinyl acetate) (PVAc) and low density polyethylene (LDPE) as references. TMDSC analysis of the copolymer‐silica samples in the glass transition region was complicated for the copolymers because of the ethylene crystallinity. Nevertheless, examination of the glass transition region for small adsorbed amounts of these copolymers indicated the presence of tightly‐ and loosely‐bound polymer segments, similar to other polymers which have an attraction to silica. Compared with bulk polymers with the same composition, the tightly‐bound polymers showed an increased glass transition temperature (T_g) and a loosely‐bound fraction with a lower T_g than bulk. FT‐IR spectra of the surface copolymers indicated that the fraction of bound carbonyls (p) increased as the fraction of vinyl acetate in the copolymers decreased, consistent with the notion that the carbonyls from vinyl acetate preferentially find their way to the silica surface. Spectra from samples with different adsorbed amounts of polymer were used to obtain the amount of bound polymer (M_b) and the ratio of molar absorption coefficients of bound carbonyls to free carbonyls (X). The copolymers had very large p values (up to 0.8) at small adsorbed amounts and dependent on the composition of the polymer. However, an analysis of the bound fractions, based on only the vinyl acetate groups, superimposed the data, suggesting that the ethylene units simply dilute the vinyl acetate groups in the surface polymer. The sample with the smallest fraction of vinyl acetate did not show this behavior and may be considered to be “carbonyl poor.” © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 727–736     

Crosslinking of ethylene-vinyl alcohol copolymers via polymeranalogous reactions

A practical model for polymeranalogous reactions is ethylene-vinyl alcohol copolymer with a controllable amount of hydroxylic groups. The reaction of the hydroxyl groups with various compounds leads to further functionalized polymers. The functional groups introduced are useful for modification or crosslinking reactions. The modification of ethylene-vinyl alcohol copolymers with carboxylic anhydrides and hydroxy carboxylic acids is the main subject of this investigation. The crosslinking reaction of these products with bifunctional epoxies was followed by means of viscosimetric measurements. The dependence of the reaction behaviour on the structure of the functionalized polymers used is discussed.     

Sequence distribution of partially hydrolyzed poly(vinyl acetate)

Copolymers of vinyl acetate and vinyl alcohol were studied by differential thermal analysis. The melting points of the copolymers are not a simple function of the composition, but depend on the method of preparation of the copolymers. Partial saponification of poly(vinyl acetate) with sodium hydroxide leads to high melting, ordered copolymers, while reacetylation of poly(vinyl alcohol) leads to low melting, random copolymers. Catalytic alcoholysis of PVAc yields copolymers intermediate in melting point and order. The results are treated by assuming that equal melting points indicate similar sequence length distributions of crystallizable units.     

Dynamic modification of poly(methyl methacrylate) chips using poly(vinyl alcohol) for glycosaminoglycan disaccharide isomer separation

We describe a microchip electrophoresis (MCE) method for the assay of unsaturated disaccharides of chondroitin sulfates, dermatan sulfates, and hyaluronic acid (HA). Poly(vinyl alcohol) (PVA) could be irreversibly adsorbed onto poly(methyl methacrylate) (PMMA) substrates and this approach was applicable for dynamic coating. The characteristics of the PMMA surface with PVA coating were evaluated in terms of the wettability, EOF, and adsorption of 2-aminoacridone (AMAC)-labeled disaccharide. The water contact angle decreased from 73 degrees on a pristine PMMA surface to 37.5 degrees on a PVA-coated surface, indicating that the PVA coating increased hydrophilicity. EOF was reduced approximately twofold and was relatively stable. Scanning electron microscopy and fluorescence microscopy images showed that adsorption of AMAC-labeled disaccharides was dramatically suppressed. Using the PVA coating, baseline separation of two pairs of glycosaminoglycan (GAG) disaccharide isomers, DeltaDi-diS(B)/DeltaDi-diS(D) and DeltaDi-0S/DeltaDi-HA, was achieved in Tris-borate buffer within 130 s by MCE.     

Thermoxidative degradation of vinyl alcohol/vinyl acetate copolymers. IV. Statistical copolymers

The thermoxidative degradation of vinyl acetate/vinyl alcohol statistical copolymers was studied under dynamic thermal conditions and compared with that of block copolymers. The dependence of thermal characteristics or kinetic parameters on the content of ? OH groups of copolymers was established.     

Thermal degradation of copolymers from vinyl acetate and vinyl alcohol

The thermal degradation of poly(vinyl acetate) (PVA), poly(vinyl alcohol) (PVAL), vinyl acetate-vinyl alcohol (VAVAL), vinyl acetate-vinyl-3,5-dinitrobenzoate (VAVDNB) and vinyl alcohol-3,5-dinitrobenzoate (VALVDNB) copolymers have been studied using differential thermal analysis (DTA) and thermogravimetry (TG) under isothermal and dynamic conditions in nitrogen. Thermal analysis indicates that PVA and PVAL are thermally more stable than VAVAL copolymers, being PVAL the most stable polymer. The presence of small amounts of vinyl-3,5-dinitrobenzoate (VDNB) in PVA or PVAL produces a marked decrease in the thermal stability of both homopolymers, being VALVDNB copolymers the less stable materials. The apparent activation energy of the degradative process was determined by the Kissinger and Flynn-Wall methods which agree well.     

Gas sorption and diffusion in hydrogen-bonded polymers. I. Vinyl alcohol/vinyl butyral copolymers

A series of vinyl alcohol/vinyl butyral copolymers was examined to assess the effect of internal hydrogen bonding on gas sorption and diffusion. Sorption and permeation measurements for carbon dioxide and methane were performed on four vinyl alcohol/vinyl butyral copolymers. Upon comparing the various data, it was found that hydrogen-bonded copolymers exhibit a much wider variation in diffusion coefficient than non-hydrogen-bonded copolymers. The fractional free volumes of the studied copolymers were considerably lower than expected based on values of the diffusion coefficient. This may be due to the fact that predicted occupied volumes are too large and that the effect of internal hydrogen bonding is not accounted for properly. Using a relationship between infrared spectral shift and hydrogen-bond length, fractional free volumes in the hydrogen bonded copolymers were correlated with the interatomic spacing associated with the hydrogen bond. This implies that the average length of a hydrogen bond can be used as a measure of chain packing in hydrogen-bonded polymers. © 1993 John Wiley & Sons, Inc.     

Adsorption equilibriums in a silica-poly(vinyl alcohol)-gelatin system

The interaction of gelatin with nonporous nanosized amorphous silica containing poly(vinyl alcohol) (PVA) preliminarily adsorbed on its surface is studied. It is established that the modification of the nanosilica via PVA adsorption does not influence its ability to adsorb the protein. It is shown that, during adsorption, gelatin partly displaces PVA molecules from the silica surface. It is assumed that hydroxyl groups of strongly retained PVA macromolecules may play the role of active sites of protein adsorption along with free silanol groups.     

Copolymers of vinyl fluoride

Vinyl fluoride was polymerized by photochemical initiation in a continuous-flow cylindrical reactor at room temperature and at pressures of up to 30 atm. Copolymers with vinyl acetate were prepared in order to improve the solubility and processability of poly(vinyl fluoride) (PVF). The copolymers were hydrolyzed to the corresponding vinyl alcohol copolymers and yielded hydrophilic films that are strong and flexible only when swollen by water. It was found that on hydrolysis the T_g, T_m, and heat of fusion as well as degree of crystallinity increased. It was suggested that PVF and the copolymers with vinyl alcohol are isomorphous.     

Nuclear magnetic resonance studies on microstructure of ethylene copolymers. VII. Proton resonance spectra of hydrolyzed ethylene–vinyl acetate copolymers1

Complete and partial alcoholyses of ethylene–vinyl acetate (E–VA) copolymers yield ethylene–vinyl alcohol (E–VOH) copolymers and ethylene–vinyl acetate–vinyl alcohol (E–VA–VOH) terpolymers, respectively. From the 220-MHz proton NMR spectra of E–VOH copolymers the stereoregular and chemical sequence distributions of the comonomers can be readily determined. Partially hydrolyzed E–VA polymers were acetylated with perdeuterated acetic anhydride. The monomer distributions in the terpolymers were then quantitatively determined by examining the proton spectra of the derived products. It was found that alcoholysis of E–VA polymers occurs preferentially at VA units which have neighboring VA groups.     

Synthesis of poly(vinyl acetate)‐b‐polystyrene and poly(vinyl alcohol)‐b‐polystyrene copolymers by cobalt‐mediated radical polymerization

Well‐defined poly(vinyl acetate) macroinitiators, with the chains thus end‐capped by a cobalt complex, were synthesized by cobalt‐mediated radical polymerization and used to initiate styrene polymerization at 30 °C. Although the polymerization of the second block was not controlled, poly(vinyl acetate)‐b‐polystyrene copolymers were successfully prepared and converted into amphiphilic poly(vinyl alcohol)‐b‐polystyrene copolymers by the methanolysis of the ester functions of the poly(vinyl acetate) block. These poly(vinyl alcohol)‐b‐polystyrene copolymers self‐associated in water with the formation of nanocups, at least when the poly(vinyl alcohol) content was low enough. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 81–89, 2007     

Highly protein-resistant coatings from well-defined diblock copolymers containing sulfobetaines

Three well-defined diblock copolymers of poly(sulfobetaine methacrylate) [poly(SBMA)] and poly(propylene oxide) (PPO) were synthesized by the sequential addition of SBMA monomer to fixed amounts of PPO using an atom transfer radical polymerization method and varying poly(SBMA) lengths. These copolymers were characterized by 1H NMR and aqueous gel permeation chromatography. These copolymers were physically adsorbed onto a surface plasmon resonance (SPR) sensor surface covered by methyl-terminated self-assembled monolayers, followed by the in situ evaluation of protein adsorption on the adsorbed copolymers. It is found that the behavior of the protein adsorption depends on the molecular weight of the copolymers. Results show that the diblock copolymers containing poly(SBMA) can be highly protein resistant when surface SBMA densities are well controlled. Thus, copolymers containing zwitterionic groups are ideal for resisting protein adsorption when the surface density of zwitterionic groups is controlled.     

Molecular architecture and physicochemical properties of some vinyl alcohol-vinyl acetate copolymers

Two series of vinyl alcohol-vinyl acetate copolymers were prepared by homogeneous and heterogeneous acetylation of the same precursor poly(vinyl alcohol). Their intramolecular monomer distributions were analyzed by IR spectrometry, calorimetry, and differential thermal analysis. The results show a more blocky distribution for the heterogeneously prepared copolymers. The properties of these (co)polymers in dilute aqueous solution were determined by means of viscometry. Whereas the copolymer-solvent interaction parameter of the homogeneously acetylated, random copolymers hardly varied with acetate content, a definite minimum was found for the blocky copolymers at about 7 mole% vinyl acetate. These findings were attributed to the incompatibility of dissimilar sequences, which sharply decreases with decreasing vinyl acetate sequence length. Up to about 17 mole% vinyl acetate content, the solvent quality for the copolymers is at least as good as for poly(vinyl alcohol). In addition, the dilute solution properties of the samples were established in water saturated with 1-butanol. For copolymers with up to about 17 mole% vinyl acetate, at 25°C this mixture is a better solvent than water. The highest increase in solvent quality was found for the homopolymer, whereas the increase diminished with acetate content, irrespective of the intramolecular vinyl acetate distribution. These findings are explained in terms of preferential adsorption of 1-butanol onto the (co)polymer backbone due to hydrophobic interactions and prevention of this process by the bulky acetate groups.