Unprecedented Trinuclear AgI Complex with 2,4,6‐Tris(2‐pyrimidyl)‐1,3,5‐triazine as an Efficient Catalyst for the Aziridination of Olefins

An unprecedented trinuclear heteroleptic Ag^I complex was isolated using a stable multidentate 2,4,6‐tris(2‐pyrimidyl)‐1,3,5‐triazine (TPymT) ligand. The obtained compound is an efficient catalyst for the direct aziridination of terminal olefins.     

Evaluation of different PAMAM dendrimers as molecular vehicle of 1,2,4-triazine N-oxide derivative with potential antitumor activity

The interaction between a 1,2,4-triazine N-oxide derivative, that holds potential antitumor activity under hypoxic conditions, and diverse polyamidoamine (PAMAM) dendrimers were investigated with the purpose of select the most appropriate macromolecule to act as potential molecular carrier of this active compound. The results shows that dendrimers with amine terminal groups (PAMAM-AT G = 3) and dendrimers with carboxylate terminal groups (PAMAM-CT G2.5 and G4.5) produces triazine derivative hydrolysis, even in buffered medium, and are not suitable as carriers. In contrast, dendrimers with neutral end groups (PAMAM-OHT) shows stable association with the active compound, making this dendrimer a possible medium for triazine carriage.     

[Sm(NO3)3(TPTZ)(H2O)]·2H2O [TPTZ is 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]

The title compound, aqua­tris­(nitrato)[2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]samarium dihydrate, [Sm(NO₃)₃­(C₁₈H₁₂N₆)­(H₂O)]·­2H₂O, was prepared from Sm(NO₃)₃·6H₂O and 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine. The metal atom is ten‐coordinate being bonded to the terdentate TPTZ ligand, three bidentate nitrates and a water mol­ecule.     

Synthesis and structural characterization of a highly substituted triazine ring comprising a sterically flexible methylene linker and coordinating substituents

The efficient multi-step, large-scale synthesis, spectroscopic characterization and solid-state molecular structure of a new type of three-fold functionalized, sterically demanding triazine is reported. The aromatic heterocycle 6,6′,6′'-((1,3,5-triazine-2,4,6-triyl)tris(methylene))tris(2,4-di-tert-butylphenol) possesses three 2,4-di-tert-butylphenol synthons bound to the 1,3,5-triazine ring via synthetically challenging methylene linkages in the 2,4,6 positions. The key to success was found in the generation of a highly reactive imidate hydrochloride salt, namely ethyl 2-(3,5-di-tert-butyl-2-methoxyphenyl)acetimidate hydrochloride, that readily undergoes cyclotrimerization. The reported preparation opens new perspectives in the design and synthesis of novel triazine molecules bearing flexible and sterically demanding functionalized groups for various applications.     

Synthetic Approach to 6-Benzoyl-2H-[1,2,4]triazine-3,5-dione and 6-Benzyl-5-thioxo-3,4-dihydro-2H-[1,2,4]triazin-3-one and Studies on Their Transformation to Fused[1,2,4]triazine Systems

Reaction of phenylpyruvic acid with semicarbazide afforded 6-benzyl-2H-[1,2,4]triazine-3,5-dione ( 1 ) which upon oxidation with potassium dichromate furnished 6-benzoyl-2H-[1,2,4]triazine-3,5-dione ( 2 ) in good yield. Constructing pyrazolo[3,4-e][1,2,4]triazine system ( 4 ) was achieved by reacting 2 with arylhydrazines in ethanolic solution. However treatment of 2 with the less reactive heteroarylhydrazines gave only the corresponding hydrazones ( 3 ). Attempt for constructing 1,2,4,5,10-pentaaza-dibenzo[a,d]cyclohept-3-one ( 7 ) from 2 was failed and (benzoimidazol-2-yl) [1,2,4] triazine derivative ( 6 ) was the only product. Reaction of 1 with phosphorus pentasulphide afforded compounds 8 and 9 . Compound 8 was transformed to the hydrazino compound 14 , which led to the construction of triazolo[4,3-d] [1,2,4]triazine system. Thus compounds 15 and 16 were obtained by reacting 14 with carbon disulfide or acetic anhydride respectively. Attempt to couple 8 with chloroacetic acid failed, while it's known isomer 10 led to the formation of thiazolo [2,3-c] [1,2,4]triazine derivative ( 13 ). Simple theoretical calculation using AM1 and PM3 semiempirical Hamitonian provided rational ways to correlate the reactivity with structure proposed.     

Linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit: Synthesis and optical properties

Some linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit were synthesized via Sonogashira or Suzuki reaction for the first time and characterized by IR, NMR, and GPC. Because of the introduction of 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit into π‐conjugated system, all polymers exhibited good thermal stability with high decomposition temperature. Their optical and electrochemical properties were investigated. Based on the 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit linked with different aromatic rings, the polymers showed the tunable fluorescence from blue to blue‐green emission with satisfied quantum yield. Cyclic voltammetry measurement indicated that the LUMO and HOMO levels of the polymers could be adjustable through the main‐chain structural modification. All polymers had low LUMO level (?2.86 to ?3.06 eV) due to the high‐electron affinity of triazine unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 702–712, 2008     

On the Structure and Chiral Aggregation of Liquid Crystalline Star-Shaped Triazines H-Bonded to Benzoic Acids

The ability of a star-shaped tris(triazolyl)triazine derivative to hierarchically build supramolecular chiral columnar organizations through the formation of H-bonded complexes with benzoic acids was studied from a theoretical and experimental point of view. The combined study has been done at three different levels including the study of the structure of the triazine core, the association with benzoic acids in stoichiometry 1:3, and the assembly of 1:3 complexes in helical aggregates. Although the star-shaped triazine core crystallizes in a non-C₃ conformation, the C₃-symmetric conformation is theoretically predicted to be more stable and gives rise to a favorable C₃ supramolecular 1:3 complex upon the interaction with three benzoic acids in their voids. In addition, calculations at different levels (DFT, PM7, and MM3) for the 1:3 host-guest complex predict the formation of large stable columnar helical aggregates stabilized by the compact packing of the interstitial acids by π–π and CH⋅⋅⋅π interactions. The acids restrict the movement of the the star-shaped triazine cores along the stacking axis causing a template effect in the self-assembly of the complex. Theoretical predictions correlate with experimental results, since the interaction with achiral or chiral 3,4,5-(4-alkoxybenzyloxy)benzoic acids gives rise to supramolecular complexes that organize in bulk hexagonal columnar mesophases stable at room temperature with intracolumnar order. The existence of supramolecular chirality in the mesophase was determined for complexes formed by acids derived from (S)-2-octanol. Chiral aggregation was also evidenced for complexes formed in dodecane.     

Supramolecular Columnar Liquid Crystals Formed by Hydrogen Bonding between a Clicked Star‐Shaped s‐Triazine and Benzoic Acids

A star‐shaped tris(triazolyl)triazine is shown to establish hydrogen‐bond interactions with polycatenar benzoic acids. The formation of hydrogen‐bonded triazine/acid complexes has been demonstrated both in solution and in bulk by different techniques. The complexes, mainly formed by nonmesogenic components, all show enantiotropic hexagonal columnar mesomorphism, which relies on the formation of hydrogen‐bond complexes in a triazine/acid ratio of 1:3. This approach combines the straightforward synthesis of a nonmesomorphic triazine core by click chemistry, and the preparation of a supramolecular complex, providing a much more convenient route than covalent synthesis to modify the periphery of triazine discotics and thus to modulate their functionality.     

An amphiphilic C60 derivative with a tris(2,2′-bipyridine)ruthenium(II) polar head group: synthesis and incorporation in Langmuir films

An amphiphilic C₆₀ derivative with a tris(2,2′-bipyridine)ruthenium(II) polar head group has been prepared. The Langmuir film of this compound has been characterized by its surface pressure versus molecular area (Π/A) isotherm and Brewster angle microscopy (BAM) observations.     

The Synthesis and Characterization of s‐Triazine‐Cored Tripodal Structure and Its Salen/Salophen‐Bridged Fe/Cr(III) Capped Complexes

A novel Schiff base compound was synthesized, and its complexation properties with Fe(III) and Cr(III) were investigated. Tripodal ligand was synthesized by the reaction of s‐triazine and 4‐hydroxybenzaldehyde. Then a Schiff base involving 8‐hydroxyquinoline was synthesized by the reaction of 5‐aminomethyl‐8‐hydroxyquinoline ( QN ) and 2,4,6‐tris(p‐formylphenoxy)‐1,3,5‐triazine ( TRIPOD ) in methanol/chloroform media. The obtained Schiff base ( QN-TRIPOD ) was then reacted with four trinuclear Fe(III) and Cr(III) complexes including tetradentate Schiff bases N ,N ′‐bis(salicylidene)ethylenediamine (salenH₂)/bis(salicylidene)‐o‐phenylenediamine (SalophenH₂). The synthesized ligand and complexes were characterized by means of elemental analysis carrying out ¹H NMR, FTIR spectroscopy, thermal analyses, and magnetic susceptibility measurements. Finally, metal ratios of the prepared complexes were determined by using atomic adsorption spectrometry.     

Solvatochromic Behavior of Chiral Mesoporous Metal–Organic Frameworks and Their Applications for Sensing Small Molecules and Separating Cationic Dyes

Two anionic metal–organic frameworks (MOFs) with 1D mesoporous tubes ( 1 ) and chiral mesoporous cages ( 2 ) have been rationally constructed by means of a predesigned size‐extended hexatopic ligand, namely, 5,5′,5′′‐(1,3,5‐triazine‐2,4,6‐triyl)tris‐ (azanediyl)triisophthalate (TATAT). Charge neutrality is achieved by protonated dimethylamine cations. Notably, the two MOFs can be used to separate large molecules based on ionic selectivity rather than the size‐exclusion effect so far reported in the literature. Owing to the imino triazine backbone and carboxyl groups of the hexatopic ligand, which provide important host–guest interactions, rare solvatochromic phenomena of 1 and 2 are observed on incorporating acetone and ethanol guests. Furthermore, guest‐dependent luminescence properties of compound 2 were investigated, and the results show that luminescence intensity is significantly enhanced in toluene and benzene, while quenching effects are observed in acetone and ethanol. Thus, compound 2 may be a potential material for luminescent probes.     

Tris(2‐cyanoethyl) isocyanurate

The title compound, 1,3,5‐tris(2‐cyano­ethyl)‐1,3,5‐triazine‐2,4,6(1H,3H,5H)‐trione, C₁₂H₁₂N₆O₃, forms a layered structure stabilized by C—H?O and C—H?N hydrogen bonds.     

Control of Silver(I)–Dialkyl Chalcogenide Coordination by a Synthetic Cavity

The discrete cavity of a self‐assembled palladium–tris(4‐pyridyl)triazine cage dictates the ratio of metal, ligand, and a non‐coordinative molecule in the formation of silver(I)–dialkyl chalcogenide (Et, nBu; S, Se) complexes and defines their coordination arrangement.     

The ESI CAD fragmentations of protonated 2,4,6‐tris(benzylamino)‐ and tris(benzyloxy)‐1,3,5‐triazines involve benzyl–benzyl interactions: a DFT study

The electrospray ionization collisionally activated dissociation (CAD) mass spectra of protonated 2,4,6‐tris(benzylamino)‐1,3,5‐triazine (1) and 2,4,6‐tris(benzyloxy)‐1,3,5‐triazine (6) show abundant product ion of m/z 181 (C₁₄H₁₃⁺). The likely structure for C₁₄H₁₃⁺ is α‐[2‐methylphenyl]benzyl cation, indicating that one of the benzyl groups must migrate to another prior to dissociation of the protonated molecule. The collision energy is high for the ‘N’ analog (1) but low for the ‘O’ analog (6) indicating that the fragmentation processes of 1 requires high energy. The other major fragmentations are [M + H‐toluene]⁺ and [M + H‐benzene]⁺ for compounds 1 and 6, respectively. The protonated 2,4,6‐tris(4‐methylbenzylamino)‐1,3,5‐triazine (4) exhibits competitive eliminations of p‐xylene and 3,6‐dimethylenecyclohexa‐1,4‐diene. Moreover, protonated 2,4,6‐tris(1‐phenylethylamino)‐1,3,5‐triazine (5) dissociates via three successive losses of styrene. Density functional theory (DFT) calculations indicate that an ion/neutral complex (INC) between benzyl cation and the rest of the molecule is unstable, but the protonated molecules of 1 and 6 rearrange to an intermediate by the migration of a benzyl group to the ring ‘N’. Subsequent shift of a second benzyl group generates an INC for the protonated molecule of 1 and its product ions can be explained from this intermediate. The shift of a second benzyl group to the ring carbon of the first benzyl group followed by an H‐shift from ring carbon to ‘O’ generates the key intermediate for the formation of the ion of m/z 181 from the protonated molecule of 6. The proposed mechanisms are supported by high resolution mass spectrometry data, deuterium‐labeling and CAD experiments combined with DFT calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

A convenient preparative method for anionic tris(substituted pyrazolyl)methane ligands

The synthesis of tris[3-(6-carboxypyridin-2-yl)pyrazol-1-yl]methane is described in a linear multi-step protocol. The pyridyl-pyrazolyl arms are first constructed before being condensed with chloroform. Careful study of the condensation reaction shows the presence of an isomeric form of the tris(pyrazolyl)methane derivative in which one of the pyrazolyl substituents is linked through the nitrogen atom at the 2 position of the pyrazol. After acid-catalysed isomerisation to the desired isomer, the intermediate compound was subjected to a carboalkoxylation reaction and a subsequent hydrolysis. These are some rare examples of reactions directly occurring on the tris(pyrazolyl)methane platforms.     

Photopolymerization reactions initiated by a visible light photoinitiating system: Cyanine dye/borate salt/1,3,5‐triazine

New three‐component photoinitiating systems consisting of a cyanine dye, borate salt, and a 1,3,5‐triazine derivative were investigated by measuring their photoinitiation activities and through fluorescence quenching experiments. Polymerization kinetic studies based on the microcalorimetric method revealed a significant increase in polymerization rate when the concentration of n‐butyltriphenylborate salt or the 1,3,5‐triazine derivative were increased. The photo‐induced electron transfer process between electron donor and electron acceptor was studied by means of fluorescence quenching and SrEt change of the fluorescence intensity. The experiments performed documented that an increase of the n‐butyltriphenylborate salt concentration dramatically increases the rate of dye fluorescence quenching, whereas the increasing of the 1,3,5‐triazine derivative concentration slows down the consumption of the dye. We conclude that the primary photochemical reaction involves an electron transfer from the n‐butyltriphenylborate anion to the excited singlet state of the dye, followed by the reaction of the 1,3,5‐triazine derivative with the resulting dye radical to regenerate the original dye. This reaction simultaneously produces a triazinyl radical anion derived from the 1,3,5‐triazine, which undergoes the carbon‐halogen bond cleavage yielding radicals active in initiation of a free radical polymerization chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3626–3636, 2007     

Investigation of the Hydrolysis Stability of Triazine Tricarboxylate in the Presence of Transition Metal(II) Ions and Synthesis and Crystal Structure of the Alkaline Earth Triazine Tricarboxylates M3[C3N3(CO2)3]2·12H2O (M = Sr,Ba)

The stability against hydrolysis of triazine tricarboxylate (TTC) in the presence of divalent transition metal and alkaline earth ions was investigated by means of X‐ray diffraction and FTIR spectroscopy. Depending on the size of the cation either formation of the respective triazine tricarboxylate salts or hydrolysis of TTC yielding oxalate was observed. The hydrolysis of TTC induced by transition metal ions could be explained in analogy to the hydrolysis of triazine tris(2‐pyrimidyl) as a result of ring tension caused by the coordination of these ions. By the reaction of potassium triazine tricarboxylate with alkaline earth salts in aqueous solution the alkaline earth triazine tricarboxylates M₃[C₃N₃(CO₂)₃]₂ · 12H₂O (M = Sr, Ba) were obtained and analyzed by single‐crystal X‐ray diffraction. The isotypic salts represent the first examples of alkaline earth triazine tricarboxylates and the first TTC salts comprising solely divalent cations.     

New approaches to synthesis of tris[1,2,4]triazolo[1,3,5]triazines

Thermal cyclization of 3-R-5-chloro-1,2,4-triazoles (R = Cl, Ph) afforded 2,6,10-tri-R- tris[1,2,4]triazolo[1,5-a:1′,5′c:1″,5″-e][1,3,5]triazines 5 (R = Ph) and 7 (R = Cl). These compounds are first representatives of this class of heterocycles, whose structures were unambiguously established. Treatment of these compounds with nucleophiles (H₂O/NaOH, NH₃) results in the triazine ring opening to give compounds consisting of three 1,2,4-triazole rings linked in a chain. For example, treatment of cyclic compound 5 with aqueous alkali affords 3-phenyl-1-3-phenyl-1-(3-phenyl-1H-1,2,4-triazol-5-yl)-1,2,4-triazol-5-yl-1H-1,2,4-triazol-5-one. Treatment of 3,7,11-triphenyltris[1,2,4]triazolo[4,3-a:4′,3′c:4″,3″-e][1,3,5]triazine (2) with HCl/SbCl₅ leads to the triazine ring opening giving rise to 5-(3-chloro-5-phenyl-1,2,4-triazol-4-yl)-3-phenyl-4-(5-phenyl-1H-1,2,4-triazol-3-yl)-1,2,4-triazole. Thermal cyclization of the latter produces 3,7,10-triphenyltris[1,2,4]triazolo[1,5-a:4′,3′c:4″,3″-e][1,3,5]triazine (13). Thermolysis of both cyclic compound 2 and cyclic compound 13 is accompanied by the Dimroth rearrangement to yield 3,6,10-triphenyl-tris[1,2,4]triazolo[1,5-a:1′, 5′-c:4″,3″-e][1,3,5]triazine (14). Compounds 13 and 14 are the first representatives of cyclic compounds with this skeleton. ¹³C NMR spectroscopy allows the determination of the isomer type in a series of tris[1,2,4]triazolo[1,3,5]triazines.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 706–712, March, 2005.     

四氮杂大环化合物在有机电致发光器件中的应用(英文)

合成了四氮杂大环化合物,Tetraazamacrocycliccompound,6,12,19,25 tetramethyl 7,11:20,24 dinitrilo dibenzo［b,m］［1,4,12,15］tetra azacyclo docosine(TMCD).TMCD作为电子传送材料,探讨了它在有机电致发光器件中的应用.制作了结构为:玻璃基板／ITO阳极／NPD／Alq／TMCD／LiF／Al阴极的器件.评价的结果显示:该有机电致发光器件在538nm的绿色发光来源于Alq层.它的最大外部量子效率为0.84%,视感效率为1.30lm／W.最先提出了四氮杂大环化合物做为电子传送材料,可应用于电致发光领域.     

Structure and synthesis of the metribuzin blue dye. Synthesis and reactions of 2,5-dihydrazino-1,3,4-thiadiazole and its derivatives

A blue pigment which sometimes accompanies the manufacture of the triazine herbicide metribuzin ( 5 ) was identified as the novel thiadiazole formazan 10 which arises from the reaction of two impurities 3 and 7 . The latter compound is a keto acid derivative of 2,4-dihydrazinothiadiazole which in turn is an impurity in carbonothioic dihydrazide. Compound 7 has the interesting property of undergoing a facile oxidative decarboxylation in the presence of alcohols to form hydrazonate esters and in the presence of aliphatic amines to form red amidrazone dyes 9 . The N-substituted dyes can be oxidized to ditriazolothiadiazoles 12 .