Fluorescence properties of indolenine semi-squarylium dyes

3-Butoxy-4-(1-butyl-3,3-dimethyl-3H-indol-2-ylidenemethyl)-3-cyclobut-1,2-dione exhibited the most intense florescence at fluorescence maxima 536 and 563 nm with fluorescence quantum yield 0.21 among any indolenine semi-squarylium dyes in the crystalline form due to the isolated dimer-type molecular packing and its suitable melting point. This compound showed aggregation-induced emission enhancement.     

Synthesis of aza-BODIPY dyes bearing the naphthyl groups at 1,7-positions and application for singlet oxygen generation

Near-infrared absorbing aza-BODIPYs with the naphthyl groups at 1,7-positions were prepared for the first time. The singlet oxygen generation of aza-BODIPY with the naphthyl groups at 1,7-positions was more effective than that of the corresponding aza-BODIPY with the phenyl groups at 1,7-positions.     

Interactions of a water-soluble calix[4]arene with spermine: solution and solid-state characterisation

Abstract

The octaanionic 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)-calix[4]arene (cone conformation) (C₄TsTc) was investigated as a sensor for the biogenic tetracationic polyamine, spermine _.(H₄Spe⁴⁺). Fluorescence titration experiments of the water-soluble calixarene with spermine showed the formation of the 2:1 and 1:1 calixarene:spermine complexes in solution. The single crystal X-ray diffraction analysis of [(NaC₄TsTc)₄·(H₄Spe)₇] confirmed the formation of 2:1 and 1:1 calixarene:spermine species and showed that the water-soluble calixarene binds the spermine either by partially hosting it in the inner cavity or through the carboxylate groups on the lower rim. In order to investigate the effect of multivalent systems, supramolecular assemblies of octaanionic calixarene molecules templated by meso-tetrakis(4-N-methylpyridyl)porphyrin (H₂T₄) in different stoichiometric porphyrin:calixarene ratios (1:4 and 3:4) were also tested for spermine binding in solution. Fluorescence titration experiments with the 1:4 and 3:4 H₂T₄:C₄TsTc supramolecular complexes showed that the multivalent assemblies are more sensitive to the presence of spermine than the calixarene alone.     

A facile synthesis of solid-emissive fluorescent dyes: dialkylbenzo[b]naphtho[2,1-d]furan-6-one-type fluorophores with strong blue and green fluorescence emission properties

A new type of organic fluorophores, dialkylbenzo[b]naphtho[2,1-d]furan-6-one-type fluorophores, exhibiting strong blue and green emission in the solid state has been easily synthesized by an one-step reaction. The X-ray crystal structure demonstrated that the structural form with a chair-shape with the sterical hindered dialkyl substituents and the 9-dibutylamino group prevents the fluorophores from forming short intermolecular contacts and produces intense solid-state fluorescence emission.     

X-ray crystallographic analysis of N,N-diallylcoumarincarboxamides and the solid-state photochemical reaction

X-ray crystallographic analysis and the photochemical aspects of N,N-diallylcoumarincarboxamides were investigated. Irradiation of the corresponding amides promoted stereoselective intramolecular cyclobutane formation exclusively. The solid-state photoreaction of the coumarinamide without substituent on the 4-position proceeded in a crystal-to-crystal manner. On the other hand, photolysis of the amide possessing a methyl group at the 4-position also effected 2+2 cycloaddition; however, the reaction proceeded much slower. The difference in the reactivity was explainable on the basis of the molecular conformation in the crystal lattice.     

Drastic solid-state fluorescence enhancement behaviour of imidazo[4,5-a]naphthalene-type fluorescent hosts upon inclusion of polyethers and tert-butyl alcohol

As one of the most promising materials for the construction of desirable solid-state fluorescent system, new solid-state fluorescent host-guest system, which consists of the imidazo[4,5-a]naphthalene-type fluorescent hosts 2 and sterically hindered guest molecules were designed and prepared. The crystals of 2 exhibit sensitive colour change and drastic fluorescence enhancement behaviour upon polyethers (diethylene glycol dimethyl ether (DGDM), diethylene glycol diethyl ether (DGDE) and diethylene glycol dibutyl ether (DGDB)) or tert-butyl alcohol. A comparison of the X-ray crystal structures of the guest-free and polyether- and tert-butyl alcohol-inclusion compounds indicates that the enclathrated polyether or tert-butyl alcohol molecule decrease the π-stacking between hosts and enlarge the distance between the host-host aromatic planes. On the bases of the spectral data and the crystal structures, the effects of the enclathrated sterically hindered guest on the drastic solid-state fluorescence enhancement behaviour of the host-guest crystals are discussed.     

Polarized fluorescence and electroluminescence from rubbing-aligned conjugated polymers and their composites with fluorescent dyes

Polarized fluorescence and optical absorption studies of rubbing-treated poly(2,5-diheptyloxybenzene) and poly (3-alkylthiophene)s (PATs) were carried out with the aim of obtaining polarized electroluminescence (EL). It was revealed that there exists an optimum alkyl chain length in PATs for the effect of rubbing. Polarized EL with a dichroic ratio of 2.6 was observed from a rubbing-aligned PAT-12 film. It was also demonstrated that the rubbing treatment of composite films of PAT and several fluorescent dyes such as 1,4-bis (2-methylstyryl)benzene enabled us to obtain polarized emission from oriented dye molecules. © 1997 John Wiley & Sons, Ltd.     

Synthesis and application of rhodamine-based fluorescent probe dyes with spacer linker arm

When rhodamine-based fluorescent probe dyes are used to track target molecules they always perturb the behavior of target molecules because of steric hindrance effect. In order to minimize potential steric problems, a kind of rhodamine-based fluorescent probe dye with spacer linker arm was designed and synthesized and its application in immunofluorescence histochemistry was investigated.     

First linear alignment of five C-Se...O...Se-C atoms in anthraquinone and 9-(methoxy)anthracene bearing phenylselanyl groups at 1,8-positions

Five Ci-Se...O...Se-Ci atoms in anthraquinone and 9-(methoxy)anthracene bearing phenylselanyl groups at 1,8-positions align linearly, the origin of which is shown to be a nonbonded 5c-6e interaction of the five atoms.     

An efficient one-pot synthesis of strongly fluorescent (hetero)arenes polysubstituted with amino and cyano groups

An efficient one-pot synthesis simultaneously results in three types of densely substituted mono-, di- and tetracyclic π-systems, which can easily be isolated. Each chromophore presents a strong fluorescence emission, either in the red, green or blue part of the spectrum.     

Synthesis and Alkylation of 4-(2-Chlorophenyl)-3-cyano-6-hydroxy-5-(2-thienoyl)-6-trifluoromethylpiperidin-2-thione

4-(2-Chlorophenyl)-3-cyano-6-hydroxy-5-(2-thienoyl)-6-trifluoromethylpiperidin-2-thione, which was used for the synthesis of 2-allylthio-4-(2-chlorophenyl)-3-cyano-6-hydroxy-5-(2-thienoyl)-6-trifluoromethyl-1,4,5,6-tetrahydropyridine, was obtained by the reaction of 2-thienoyltrifluoroacetone with 2-chlorophenylphenylmethylenecyanothioacetamide or with a mixture of 2-chlorobenzaldehyde and cyanothioacetamide in the presence of N-methylmorpholine. The molecular and crystal structure of the piperidinthione have been established by X-ray crystallography.     

Serendipitous stereoselective synthesis of brand-new fluorescent dyes: (1Z)-3-(alkylimino)-1-[(chromone-3-yl)methylene]-1,3-dihydro-9H-furo[3,4-b]chromen-9-one-type fluorophores with blue fluorescence emission properties

The reactions of 3-formylchromones with alkyl isocyanides in dry dichloromethane at room temperature lead to new types of organic fluorophores (1Z)-3-(alkylimino)-1-[(chromone-3-yl)methylene]-1,3-dihydro-9H-furo[3,4-b]chromen-9-one, which exhibited strong blue emission in solution. The reactions involve a [4+1] cycloaddition followed by an activated electrophilic aromatic substitution at the furan ring and dehydration sequence.     

Image formation by dyeing of copolymers bearing photogenerated acid and base groups with dye bath containing acid and basic dyes

Copolymers bearing photoacid generating groups and/or photobase generating groups were dyed after UV irradiation with a dye bath containing both an acid dye and a basic dye. Acetophenone O‐acryloyloxime (AAPO) was used as a monomer bearing acyloxyimino (AOI) group that generates a primary amino group upon irradiation, which is followed by hydrolysis. Phenacylsulfonylstyrene (PSSt) and 1,2,3,4‐tetrahydronaphthylideneamino p‐styrenesulfonate (NISS) were chosen as monomers having β‐keto sulfone (β‐KS) and iminosulfonate (IS) groups, respectively, which yielded acid groups when irradiated. Copolymers of AAPO and methyl methacrylate (MMA) were dyed with only the acid dye, and those of PSSt or NISS were dyed with only the basic dye after irradiation. AAPO‐PSSt‐MMA films became dyeable with the acid dye when irradiated for a short time and with the basic dye with further irradiation. However, AAPO‐NISS‐MMA copolymers showed the reverse dyeing behavior. IR spectra revealed that AOI groups were photochemically decomposed prior to the β‐KS groups for AAPO‐PSSt‐MMA, and AOI and IS groups decomposed simultaneously for AAPO‐NISS‐MMA. These results suggested the possibility of adsorption of different ionic dyes on the films by a change of irradiation time; in fact, color patterns could be obtained in a single staining process using the dye bath. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3043–3051, 2000     

Synthesis,spectral, electrochemical properties,and photovoltaic performance of structurally constrained BODIPY dyes with 4,4-dimethyltriphenylamine at the 2,6-positions

Novel symmetrical D–A–D type of BODIPY derivatives (DTPA–BDP) were synthesized successfully. The introduction of chromophoric units makes the molecule absorption wavelengths spanning the ranges of 300–800 nm and shifts the emission to 793 nm in red and near-infrared region. Bulk heterojunction solar cells with DTPA–BDPs as electron donor and PC₆₁BM as electron acceptor exhibited photovoltaic properties with a power conversion efficiency of 0.77%, an open-circuit voltage of 0.70 V.     

Anion recognition by 2,2′-binaphthalene derivatives bearing urea and thiourea groups at 8- and 8′-positions by UV-vis and fluorescence spectroscopies

Synthesis and anion recognition properties of 2,2′-binaphthalene derivatives bearing two thiourea (1) and urea (2) groups at 8- and 8′-positions were studied. The structure of receptor 1 was determined by X-ray crystallography. UV-vis spectra of the receptors showed characteristic changes around 300-400 nm through isosbestic points upon the addition of biologically relevant anions such as acetate, dihydrogenphosphate, and chloride in MeCN and DMSO due to restriction of the rotation around the single bond connecting two naphthyl moieties by cooperative guest binding of two recognition sites. Job’s plots showed 1:1 complexation for guest anions. The fluorescence quantum yields of free form of 1 and 2 in MeCN were determined to be 0.021 and 0.57, respectively. The fluorescence intensities of the receptors diminished upon the addition of anions in MeCN. The association constants of receptors 1 and 2 were one or two orders of magnitude greater than the corresponding monothiourea and urea receptors 3 and 4 indicating cooperative hydrogen bonding with guest anions. The selectivity trends of association of anions were F⁻>AcO⁻>H₂PO₄⁻>Cl⁻>>HSO₄⁻≈NO₃⁻≈Br⁻≈I⁻ for 1, and F⁻>AcO⁻≈Cl⁻>H₂PO₄⁻>Br⁻>HSO₄⁻>I⁻≈NO₃⁻ for 2. Receptor 2 showed remarkable Cl⁻ selectivity presumably owing to suitable orientation for effective hydrogen bond formation with Cl⁻.     

Molecular and crystal structures of N,N′-propylene- and N,N′-phenylene-diylbis [3-(1-aminoethyl)-6-methyl-2H-pyran-2,4(3H)-dione]

Two macrocyclic ligands, N,N′-propylene-diylbis[3-(1-aminoethyl)-6-methyl-2H-pyran-2,4(3H)-dione] I and N,N′-phenylene-diylbis[3-(1-aminoethyl)-6-methyl-2H-pyran-2,4(3H)-dione] II, have been prepared by the condensation of dehydroacetic acid (3-acetyl-4-hydroxy-6-methyl-2H-pyran-2-one) with 1,2-phenylenediamine and 1,3-propylenediamine. They have been characterized by means of elemental analysis, IR spectroscopy as well as by X-ray crystallography. The molecular structures of the compounds I and II can be described as consisting of two β-enaminone-2-pyrone rings interlaced with either alkyl chain in I or phenyl ring in II. The X-ray studies confirmed the existence of strong N–HO intramolecular hydrogen bonds in both structures. Their lengths are in accordance to lengths of RAHB intramolecular hydrogen bonds in 1,3-diketones, aryl-hydrazones, β-enaminones and related heterodienes (2.5–2.6 Å) [P. Gilli, V. Bertolasi, V. Ferretti and G. Gilli, J. Am. Chem. Soc., 122 (2000) 10405].     

New Re(I) tricarbonyl-diimine complexes with N,N′-bis(substituted benzaldehyde)-1,2-diiminoethane Schiff base ligands: Synthesis,spectroscopic and electrochemical studies and crystal structures

The syntheses, structures and spectroscopic properties of tricarbonylrhenium(I) complexes with N,N′-bis(2-bromo, 4-bromo, 4-chloro and 3-methoxybenzaldehyde)-1,2-diiminoethane Schiff base ligands have been investigated in this paper. Characterization of these complexes was carried out with FTIR, NMR, UV–Vis spectroscopy, elemental analysis and X-ray crystallography. The electrochemical behavior of the investigated complexes has been studied by cyclic voltammetry. The crystal structures of the 4-chloro, 4-bromo and 4-methoxy substituted complexes are stabilized by intermolecular C–H?Cl and C–H?O hydrogen bonds. The remarkable features of the 2-bromo, 4-bromo and 4-chloro substituted complexes are short intermolecular halogen–oxygen contacts. In the 4-bromo complex, short intermolecular Br?O and O?O contacts link neighboring molecules along the [1 0 0] direction, which are further stabilized by short intermolecular π?π interactions. In 2-bromo complex, intermolecular Br?O interactions link neighboring molecules into 1D extended chains along the [0 1 0] and [0 0 1] directions, forming a 2D network which is parallel to the bc-plane.     

4-(9-蒽基)-6-十六烷氧基-2-氨基-1,3,5-三嗪的合成及光谱行为的研究

从三氯均三嗪出发通过三步反应合成了4-(9-蒽基)-6-十六烷氧基-2-氨基-1,3,5-三嗪(AHTA),并通过红外、核磁、质谱、高分辨质谱对目标产物进行了表征.研究表明AHTA分子在基态下分子的蒽环与三嗪环不共平面,激发态下表现为ICT的荧光发射.由于分子间氢键作用的存在,AHTA在自组装膜和LB膜中均形成H-聚集体.     

Synthesis and characterization of D‐(−)‐Salicine‐based star copolymers containing pendant carboxyl groups with fluorophore dyes

Salicin was modified to monoacetals and diacetals with bromoester groups (f_Br = 4 and 6) initiating atom transfer radical polymerization (ATRP). These glucoinitiators were used to synthesize 4‐ and 6‐arm star copolymers of tert‐butyl methacrylate (tBMA) and methyl methacrylate (MMA) with different arm polymerization degree (DP_arm = 13 ? 79), and composition (25–75 mol % of tBMA). The transformation of hydrophobic stars into amphiphilics by acidolysis of tert‐butyl groups resulted in copolymers with various contents of hydrophilic fraction based on methacrylic acid (MAA) units (13–75 mol %), which were labeled with fluorescein amine (FA) for the future studies of targeted internalization. The UV spectroscopy and fluorescence measurements of the prepared copolymers confirmed the incorporation of fluorophore moieties (1–14 FA labeled units as max. 5% of total MAA units). The solution properties of star polyacids observed by DLS in a function of a pH show a specific behavior related to the interchain/intrachain interactions yielding particles with diameter sizes in the range from 3 to 15 nm, which can be significantly increased to 180–270 nm by addition of NaCl. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2399–2411     

Pyridine-type complexes of transition-metal halides. III: Structural and thermal relationships among the cobalt(II) complexes with halide ions and 2-, 3-, and 4-Methylpyridine,the crystal structure of dibromotetrakis (3-methylpyridine)cobalt(II)

The correlation between structure and thermal properties of halogeno methylpyridine cobalt(II) is described. The ternary mixed tetrakis-derivatives and the tetrahedral bis-complexes of cobalt(II) chlorides and bromides formed with picolines are structurally very similar to the cadmium(II) and nickel(II) analogues, the iodides are somewhat different, however. On the basis of the characteristic correlation between the densities calculated from powder diffraction data and the molecular weights, the densities of a few thermal intermediates, which have not yet been prepared, are predicted. The square bipyramidal structure of dibromotetrakis(3-methylpyridine)cobalt(II) is described, and the deformation of the octahedra is discussed in detail. Structural study was extended by molecular mechanics (MM+ and MMX) and molecular orbital (SINDO1) calculations.