A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

A fluorescent chemosensor for Hg based on naphthalimide derivative by fluorescence enhancement in aqueous solution

Naphthalimide derivative (compound 1) containing hydrophilic hexanoic acid group was synthesized and used to recognize Hg²⁺ in aqueous solution. The fluorescence enhancement of 1 is attributed to the formation of a complex between 1 and Hg²⁺ by 1:1 complex ratio (K = 2.08 × 10⁵), which has been utilized as the basis of fabrication of the Hg²⁺-sensitive fluorescent chemosensor. The comparison of this method with some other fluorescence methods for the determination of Hg²⁺ indicated that the method can be applied in aqueous solution rather than organic solution. The analytical performance characteristics of the proposed Hg²⁺-sensitive chemosensor were investigated. The chemosensor can be applied to the quantification of Hg²⁺ with a linear range covering from 2.57 × 10⁻⁷ to 9.27 × 10⁻⁵ M and a detection limit of 4.93 × 10⁻⁸ M. The experiment results show that the response behavior of 1 toward Hg²⁺ is pH independent in medium condition (pH 4.0–8.0). Most importantly, the fluorescence changes of the chemosensor are remarkably specific for Hg²⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the response of the chemosensor toward Hg²⁺ is fast (response time less than 1 min). In addition, the chemosensor has been used for determination of Hg²⁺ in hair samples with satisfactory results, which further demonstrates its value of practical applications.     

A highly selective fluorescent probe for Hg based on a rhodamine-coumarin conjugate

A fluorescent probe 1 for Hg²⁺ based on a rhodamine-coumarin conjugate was designed and synthesized. Probe 1 exhibits high sensitivity and selectivity for sensing Hg²⁺, and about a 24-fold increase in fluorescence emission intensity is observed upon binding excess Hg²⁺ in 50% water/ethanol buffered at pH 7.24. The fluorescence response to Hg²⁺ is attributed to the 1:1 complex formation between probe 1 and Hg²⁺, which has been utilized as the basis for the selective detection of Hg²⁺. Besides, probe 1 was also found to show a reversible dual chromo- and fluorogenic response toward Hg²⁺ likely due to the chelation-induced ring opening of rhodamine spirolactam. The analytical performance characteristics of the proposed Hg²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Hg²⁺ from 8.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ and the detection limit is 4.0 × 10⁻⁸ mol L⁻¹. The determination of Hg²⁺ in both tap and river water samples displays satisfactory results.     

Hg- and Cu-selective fluoroionophoric behaviors of a dioxocyclam derivative bearing anthrylacetamide moieties

New dioxocyclam derivatives bearing two anthracene fluorophores were prepared, and their fluoroionophoric properties toward transition metal ions were investigated. Chemosensor 2 having anthrylacetamide moieties exhibited pronounced Hg²⁺- and Cu²⁺-selective fluoroionophoric properties in aqueous acetonitrile solution over other representative transition metal ions, as well as alkali and alkaline earth metal ions. Chemosensor 2 also exhibited Hg²⁺ and Cu²⁺ selectivity under competitive conditions in the presence of physiologically and environmentally important metal ions. The detection limits for the sensing of Hg²⁺ and Cu²⁺ ions were 7.8 × 10⁻⁶ and 1.5 × 10⁻⁶ M, respectively, in aqueous 95% acetonitrile solution.     

Salicylaldehyde hydrazones as fluorescent probes for zinc ion in aqueous solution of physiological pH

Salicylaldehyde hydrazones of 1 and 2 were synthesized and their potential as fluorescent probes for zinc ion was investigated in this paper. Both of the probes were found to show fluorescence change upon binding with Zn²⁺ in aqueous solutions, with good selectivity to Zn²⁺ over other metal ions such as alkali/alkali earth metal ions and heavy metal ions of Pb²⁺, Cd²⁺ and Hg²⁺. They showed 1:2 metal-to-ligand ratio when their Zn²⁺ complex was formed. By introducing pyrene as fluorophore, 2 showed interesting ratiometric response to Zn²⁺. Under optimal condition, 2 exhibited a linear range of 0-5.0 μM and detection limit of 0.08 μM Zn²⁺ in aqueous buffer, respectively. The detection of Zn²⁺ in drinking water samples using 2 as fluorescent probe was successful.     

Design and synthesis of fluorescent 6-aryl[1,2-c]quinazolines serving as selective and sensitive ‘on-off’ chemosensor for Hg in aqueous media

Three fluorescent quinazolines thiophen-2-yl-5,6-dihydrobenzo-[4,5]imidazo[1,2-c]quinazoline (1), pyridin-3-yl-5,6-dihydrobenzo-[4,5]imidazo-[1,2-c]quinazoline (2) and phenyl-5,5′,6,6′-dihydrobenzo-[4,4′,5,5′]imidazo-[1.1′,2-c,2′-c]quinazoline (3) have been synthesized. Structures of 1 and 3 have been authenticated crystallographically. Quinazolines 1-3 exhibit highly selective ‘on-off’ switching for Hg²⁺ ions. The fluorescence intensity displayed a linear relationship with respect to Hg²⁺ concentration (0.1-1.0 μM; R² = 0.99) with detection limit of 2.0 × 10⁻⁷ M.     

Novel fluorimetric bulk optode membrane based on 5,8-bis((5′-chloro-8′-hydroxy-7′-quinolinyl)methyl)-2,11-dithia-5,8-diaza-2,6-pyridinophane for selective detection of lead(II) ions

A novel fluorescence chemical sensor for the highly sensitive and selective determination of Pb²⁺ ions in aqueous solutions is described. The preliminary potentiometric and spectrofluorimetric complexation studies in solution revealed that the lipophilic ligand 5,8-bis((5′-chloro-8′-hydroxy-7′-quinolinyl)methyl)-2,11-dithia-5,8-diaza-2,6-pyridinophane (L2) forms a highly stable and selective [PbL2]²⁺ and [Pb(L2)₂]²⁺ complexes which results in a strong fluorescence quenching of the ligand. Thus, a novel fluorescence Pb²⁺ sensing system was prepared by incorporating L2 as a neutral lead-selective fluoroionophore in the plasticized PVC membrane containing tetrakis(p-chlorophenyl) borate as a liphophilic anionic additive. The response of the sensor is based on the strong selective fluorescence quenching of L2 by Pb²⁺ ions. At pH 5.5, the proposed sensor displays a calibration curve over a wide concentration range of 3.0 × 10⁻⁷ to 2.5 × 10⁻² M with a relatively fast response time of less than 5 min. In addition to high stability, reversibility and reproducibility, the sensor shows a unique selectivity towards Pb²⁺ ion with respect to common coexisting cations. The proposed fluorescence optode was successfully applied to the determination of lead in plastic toys and tap water samples.     

Highly selective and sensitive fluorescent chemosensor for Hg in aqueous solution

A new indole-based fluorescent chemosensor 1 was prepared and its metal ion sensing properties were investigated. It exhibits high sensitivity and selectivity toward Hg²⁺ among a series of metal ions in H₂O-EtOH (7:1, v/v). The association constant of the 1:1 complex formation for 1-Hg²⁺ was calculated to be 9.57 × 10³ M⁻¹, and the detection limit for Hg²⁺ was found to be 2.25 × 10⁻⁵ M. Computational results revealed that 1 and Hg²⁺ ion formed with a central tetrahedron-coordinated Hg²⁺.     

A simple click generated probe for highly selective sequential recognition of Cu(II) and pyrophosphate

A click generated quinoline derivative (1) has been synthesized and used as a fluorescent probe for sequential recognition of Cu²⁺ and pyrophosphate (PPi) in DMSO/H₂O (1:1, v/v, HEPES 20 mM, pH = 7.4) solution. Probe 1 displays high selectivity to Cu²⁺ ions, and the in-situ prepared probe 1-Cu²⁺ exhibits high selectivity toward pyrophosphate (PPi) with emission recovery of probe 1. Therefore, 1-Cu²⁺ complex can be applied as a fluorescence turn-on probe for PPi with high selectivity and sensitivity.     

A novel colorimetric and fluorescent chemosensor: synthesis and selective detection for Cu and Hg

A novel two-channel metal ion sensor has been synthesized from macrocyclic dioxotetraamine and 1,8-naphthalimide derivative. The metal ion-selective signaling behaviors of the sensor were investigated. The sensor presented the selective coloration for Cu²⁺ and Hg²⁺ that can be detected by the naked-eye, respectively. Besides, the addition of Cu²⁺ and Hg²⁺ quenched the fluorescence of 1 obviously and the detection limit was found to be 3 × 10⁻⁷ M for Cu²⁺ and 7 × 10⁻⁷ M for Hg²⁺. This sensor can be utilized for the visual and spectroscopic detection of Cu²⁺ or Hg²⁺ in the presence of the other competing metal ions.     

A new Fe fluorescent chemosensor based on aggregation-induced emission

A new tetraphenylethylene (TPE)-based sensor M1 bearing double 2-methylpyridyl-2-methylthiophenylamino units linked with triazole moieties was reported. Both UV–vis and fluorescence spectroscopic studies demonstrated that M1 was highly sensitive and selective toward Fe³⁺ over other metal ions in THF/H₂O solution based on the aggregation-induced emission quenching mechanism. The lowest detection limit of M1 for Fe³⁺ is 0.7 μM. The detailed fluorescent titration study suggested that the binding stoichiometry of the M1–Fe³⁺ complex was 1:2, and the structure between M1 and the Fe³⁺ complex was confirmed by the ¹H NMR titration.     

Fluorogenic ratiometric dipodal optode containing imine-amide linkages: Exploiting subtle thorium (IV) ion sensing

The (13E,19E)-N1′,N3′-bis[4-(diethylamino)-2-hydroxybenzylidene]malonohydrazide (L) has been developed for the detection of Th⁴⁺ ions using dual channel signalling system. The UV–vis absorbance and fluorescence spectroscopic data revealed the formation of L–Th⁴⁺ complex in 1:1 equilibrium. The density functional theory (DFT) also confirms the optimum binding cavity for the recognition of metal ion. The binding constant computed from different mathematical models for an assembly of L–Th⁴⁺. The detection limit of L for Th⁴⁺ recognition is to a concentration down to 0.1 μM (0.023 μg g⁻¹). The present sensing system is also successfully applied for the detection of Th⁴⁺ ion present in soil near nuclear atomic plants.     

Naphthalimide-based fluorescent Zn chemosensors showing PET effect according to their linker length in water

We have developed naphthalimide-based fluorescent chemosensors that exhibit fluorescence enhancement upon binding Zn²⁺ ion in 10 mM HEPES buffer (pH 7.4) at 25 °C. The fluorescence enhancement was induced by a PET inhibition process in which electron transfer from the nitrogen lone pair electrons of the Dpa unit to naphthalimide was blocked upon the binding of the sensor to Zn²⁺. The longer the linker length (n = 1-3) of the sensor, the less the PET efficiency becomes. Among the sensors (1, 2, and 3) examined, 1 shows the highest selectivity and sensitivity for Zn²⁺ over other transition metal ions and alkali metal ions in water.     

Fluorogenic dual click derived bis-glycoconjugated triazolocoumarins for selective recognition of Cu(II) ion

Carbohydrate based fluorescent sensors S1 and S2 have been developed by fluorogenic dual click chemistry and are characterized by various spectroscopic techniques. Both the fluorescent probes displayed highly selective detection of Cu²⁺ ions by means of fluorescence quenching. The job plot experiment suggested 1:1 complexation of probes S1 and S2 with Cu²⁺ ions having detection limit of 6.99 μM and 7.30 μM, respectively. The binding constants for S1-Cu²⁺ and S2-Cu²⁺ complexation were evaluated to be 3.34 × 10³ M⁻¹ and 5.93 × 10³ M⁻¹, respectively.     

Unexpected highly selective fluorescence ‘turn-on’ and ratiometric detection of Hg based on fluorescein platform

Methylated fluorescein 1 was explored for fluorescence ‘turn-on’ and ratiometric detection of Hg²⁺ in THF and CH₂Cl₂/MeOH (v/v=9:1), respectively, with unexpected high selectivity. In the presence of Hg²⁺, characteristic structured absorption band of 1 diminished and a new sharp band appeared at 445 nm. Meanwhile a blue shifted and enhanced emission was observed. The ratio of the fluorescence intensity at 559 and 478 nm increased linearly with [Hg²⁺], and solution color changing from yellow to cyan under irradiation at 365 nm in CH₂Cl₂/MeOH. Job plot indicated a 1:1 stoichiometry for 1-Hg²⁺ complex in solution. ¹H NMR titration and IR spectra suggested the coordination of carbonyl group in xanthene moiety to Hg²⁺, affording its spectral behavior. Compound 2 bearing two triazolyl amino esters in place of methyl group showed quite similar behavior to Hg²⁺, which indicated that substituents did not interfere with the specific binding behavior of fluorescein platform. Our work presents a new way to explore xanthene dyes as new chemosensors by modulating electron density on the xanthene ring through non-covalent interactions with carbonyl group.     

A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

An efficient and selective flourescent chemical sensor based on 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane as a new fluoroionophore for determination of iron(III) ions. A novel probe for iron speciation

A novel fluorescent chemical sensor for the highly sensitive and selective determination of Fe³⁺ ions in aqueous solutions is prepared. The iron sensing system was prepared by incorporating 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane (L) as a neutral Fe³⁺-selective fluoroionophore in the plasticized PVC membrane containing sodium tetraphenylborate as a liphophilic anionic additive. The response of the sensor is based on the strong fluorescence quenching of L by Fe³⁺ ions. At pH 5.5, the proposed sensor displays a calibration curve over a wide concentration range from 6.0 × 10⁻⁴ to 1.0 × 10⁻⁷ M, with a relatively fast response time of less than 2 min. In addition to a high stability and reproducibility, the sensor shows a unique selectivity toward Fe³⁺ ion with respect to common coexisting cations. The proposed fluorescence optode was applied to the determination of iron(III) content of straw of rice, spinach and different water samples. The fluorescent sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

Exploiting the deprotonation mechanism for the design of ratiometric and colorimetric Zn fluorescent chemosensor with a large red-shift in emission

The design, synthesis, and photophysical evaluation of a new naphthalimide-based fluorescent chemosensor, N-butyl-4-[di-(2-picolyl)amino]-5-(2-picolyl)amino-1,8-naphthalimide (1), were described for the detection of Zn²⁺ in aqueous acetonitrile solution at pH 7.0. Probe 1 showed absorption at 451 nm and a strong fluorescence emission at 537 nm (Φ_F=0.33). The capture of Zn²⁺ by the receptor resulted in the deprotonation of the secondary amine conjugated to 1,8-naphthalimide so that the electron-donating ability of the N atom would be greatly enhanced; thus probe 1 showed a 56 nm red-shift in absorption (507 nm) and fluorescence spectra (593 nm, Φ_F=0.14), respectively, from which one could sense Zn²⁺ ratiometrically and colorimetrically. The deprotonated complex, [(1-H)/Zn]⁺, was calculated at m/z 619.1800 and measured at m/z 618.9890. In contrast to these results, the emission of 1 was thoroughly quenched by Cu²⁺, Co²⁺, and Ni²⁺. The addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Mn²⁺, Al³⁺, Cd²⁺, Hg²⁺, Ag⁺, and Pb²⁺ produced a nominal change in the optical properties of 1 due to their low affinity to probe 1. This means that probe 1 has a very high fluorescent imaging selectivity to Zn²⁺ among metal ions.     

A hybrid mesoporous material functionalized by 1,8-naphthalimide-base receptor and the application as chemosensor and absorbent for Hg2+ in water

A novel hybrid material (SBA-P1) is prepared through the functionalization of mesoporous silica (SBA-15) with a 1,8-naphthalimide-based dye by sol-gel reaction. The characterization results of elemental analysis (EA), X-ray powder diffractometer (XRD) and spectroscopic methods demonstrate the fluorescence dye P1 is successfully grafted onto the inner surface of SBA-15 and the organized structure is preserved. SBA-P1 can detect Hg²⁺ with high selectivity to Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Co²⁺, Ag⁺, Cr³⁺, and Mg²⁺, Ca²⁺, Li⁺, Na⁺, K⁺ in water and sensitivity to environmentally relevant mercury in complex natural samples. The quenching fluorescence detection is also reversible by treating with EDTA/base. Furthermore, its fluorescence intensity keeps stable in the physiologically relevant pH range. The extraction ability of SBA-P1 is also estimated by inductively coupled plasma source mass spectrometer (ICP), showing that approximately 90% of the Hg²⁺ ion is extracted. These results imply that the hybrid material has potential application for sensing and removing of Hg²⁺ ions in waste water and working as toxicide for acute mercury poisoning.