One-step synthesis of pentavalent triphenylantimony derivatives Ph3Sb(OSiR3)2, Ph3Sb(OCH2CH2)2NH and Ph3Sb(OCH2CH2NMe2)2: X-ray molecular structure of Ph3Sb(OSiMe3)2

Pentavalent bis(triorganosiloxy)triphenylantimony derivatives, Ph₃Sb(OSiR₃)₂ (R = Me, Ph), were synthesized by reaction of triphenylantimony with trimethyl- or triphenylsilanol in the presence of tert-butylhydroperoxide by the mild reaction conditions (0-5 °C, 2 h). The reaction of triphenylantimony with diethanolamine in the presence of tert-butylhydroperoxide gave the cyclic compound Ph₃Sb(OCH₂CH₂)₂NH. The mixture of Ph₃SbO and Ph₃Sb(OCH₂CH₂NMe₂)₂ was obtained by the reaction of triphenylantimony with 2-(N,N-dimethylamino)ethanol in the presence of tert-butylhydroperoxide.     

Distorted-wave calculations for the three dimensional chemical reaction H + H2(v ⩽ 2, j = 0) → H2(v′ ⩽ 2, j′, mj) + H

Calculations of the vibrational—rotational product state population distributions and differential cross sections for the chemical reaction H + H₂(v ? 2, j = 0) → H₂(v′ ? 2, j′, m_j) + H have been carried out on the Porter—Karplus potential energy surface. The vibrationally-adiabatic-distorted-wave (VADW) method has been used. The relative rotational product distributions, differential cross sections and the helicity m_j, dependences of these quantities for the v = 0 reaction agree well with accurate close-coupling results. The absolute integral cross sections are considerably smaller than the accurate quantum values, however. The calculations for the v = 1 reaction agree with the findings of previous sudden quantum, limited close-coupling and quasiclassical theoretical studies and experiments that product H₂(v′ = 1) is more likely to be produced than H₂(v′ = 0). For the reaction with v = 2, it is found that at high translational energies product H₂(v′ = 2) is favoured over H₂(v′ = 1) or H₂(v′ = 0). The VADW differential cross sections for the v = 1 and v = 2 reactions have a similar shape to those of the v = 0 reaction, with backward peaking when summed over all m_j states. The relative rotational distributions for the v = 2, j = 0 → v′ = 2, j and v = 1, j = 0 → v′ = 1, j reactions are also similar to those obtained for the v = 0, j = 0 → v′ = 0, j reaction, with low rotational excitation.     

Oxidation process of MoOxCy to MoO3: kinetics and mechanism

A non-isothermal kinetic study of the oxidation of “carbon-modified MoO₃” in the temperature range of 150-550°C by simultaneous TGA-DTA was investigated. During the oxidation process, two thermal events were detected, which are associated with the oxidation of carbon in MoO_xC_y and MoO₂ to MoO₃. The model-free and model-fitting kinetic approaches have been applied to TGA experimental data. The solid state-kinetics of the oxidation of MoO_xC_y to MoO₃ is governed by F1 (unimolecular decay), which suggests that the reaction is of the first order with respect to oxygen concentration. The constant (Ea)_α value (about 115±5 kJ/mol) for this first stage can be related to the nature of the reaction site in the MoO₃ matrix. This indicates that oxidation occurs in well-defined lattice position sites (energetically equivalent). On the other hand, for the second stage of oxidation, MoO₂ to MoO₃, the isoconversional analysis shows a complex (Ea)_α dependence on (α) and reveals a typical behavior for competitive reaction. A D2 (two-dimensional diffusion) mechanism with a variable activation energy value in the range 110-200 kJ/mol was obtained. This can be interpreted as an inter-layer oxygen diffusion in the solid bulk, which does not exclude other simultaneous mechanism reactions.     

The production of H(2S) atoms in the energy-transfer reaction of O2(1Δg) with HO2(X̃2A″)

The reaction of O₂(¹Δg) with HO₂(X?) was studied in an isothermal flow reactor in the pressure range 7?p? 10.7 mbar at temperatures between 299?T? 423 K. H-atom production was observed in the reaction O₂(¹Δg) + HO₂(òA′) - H(²S)+ 2O₂ (³Σ_g^?). The rate of this reaction (k₁) is estimated to be k₁ = (1 ± 0.5) × 10¹⁴ CM³ Mol^?1 s^?1. The implications of this reaction to recent determinations of the rate of the reaction H + O₂(¹Δg) are discussed.     

Phosphides with Zr2Fe12P7-type structure

Twenty-six ternary phosphides Ln₂T₁₂P₇ (Ln = lanthanoid, T = Fe, Co, Ni) were prepared for the first time by reaction of the elemental components in liquid tin or by reaction of the components in evacuated silica tubes. The analysis of their powder patterns indicates their isotypism with Zr₂Fe₁₂P₇. Their lattice constants are reported. Gd₂Ni₁₂As₇ also crystallizes with that structure.     

Synthesis of cis bis-β-lactams via Staudinger cycloaddition reaction using C2-symmetric 1,2-diamines

An efficient stereoselective synthesis of bis-β-lactams via cycloaddition reaction (Staudinger reaction) of ketenes with bisimines derived from C₂-symmetric 1, 2-diamines is described. The reaction provided diastereomeric mixture of meso and C₂-symmetric cis-bis-β-lactams with higher selectivity for meso-bis-β-lactams.     

The reaction between [η5-C5H5M(CO)3]2, η5-C5H5M(CO)3I (M  Mo,W) and isonitriles

The reaction between η⁵-C₅H₅M(CO)₃I (M  Mo, W) and isonitriles, RNC, (RNC  PhCH₂NC, t-BuNC and 2,6-dimethylphenylisocyanide (XyNC)) is catalysed by the dimer [η⁵-C₅H₅M(CO)₃]₂ (M = Mo, W) to yield η⁵-C₅H₅M(CO)_3?n(RNC)_nI (n = 1–3) and [η⁵-C₅H₅Mo(RNC)₄]I. The complexes (η⁵-C₅H₅)₂Mo₂(CO)₆?n(RNC)_n (n = 1, RNC = MeNC, PhCH₂NC, XyNC, t-BuNC; n = 2, RNC = t-BuNC) have been prepared in moderate yield from the direct reaction between [η⁵-C₅H₅Mo(CO)₃]₂ and RNC, and also catalyse the above reaction. A reaction pathway involving a fast non-chain radical mechanism and a slower chain radical mechanism is proposed to account for the catalysed reaction.     

Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors

La₂Mo₂O₉ ceramics have been prepared from freeze-dried precursors and their properties compared to those of lantanum molybdate obtained by conventional solid state (SS) reaction. All materials have been characterized by X-ray diffraction, scanning electron microscopy and thermal analysis (TGA/DTA/DSC and dilatometry) to characterize the phase formation and phase transition. When the freeze-dried method was applied, the synthesis temperature required to obtain dense samples was much lower than that for powders obtained by SS reaction. The morphology and structure of the oxide particle are significantly dependent on the synthesis method. The grain size is smaller, whereas the density of sintered pellets is higher for the freeze-dried precursor powder when compared with the SS reaction method. Impedance spectroscopy was used to measure the electrical conductivity of La₂Mo₂O₉ from 548 to 1123 K, in air, and to characterize the blocking effects of grain boundaries.     

Elucidation of methyl tert-butyl ether degradation with Fe/H2O2 by purge-and-trap gas chromatography-mass spectrometry

Degradation of methyl tert-butyl ether (MTBE) with Fe²⁺/H₂O₂ was studied by purge-and-trap gas chromatography-mass spectrometry. MTBE was degraded 99% within 120 min under optimum conditions. MTBE was firstly degraded rapidly based on a Fe²⁺/H₂O₂ reaction and then relatively slower based on a Fe³⁺/H₂O₂ reaction. The dissolved oxygen decreased rapidly in the Fe²⁺/H₂O₂ reaction stage, but showed a slow increase in the Fe³⁺/H₂O₂ reaction stage. tert-Butyl formate, tert-butyl alcohol, methyl acetate and acetone were identified as primary degradation products by mass spectrometry. A preliminary reaction mechanism involving two different pathways for the degradation of MTBE with Fe²⁺/H₂O₂ was proposed. This study suggests that degradation of MTBE can be achieved using the Fe²⁺/H₂O₂ process.     

A simple conversion of azlactones into indenones via H3PW12O40/Al2O3 catalyzed intramolecular Friedel-Crafts reaction

A rapid and simple procedure for the synthesis of the indenone derivatives, N-(1-oxo-1H-inden-2-yl)benzamides, via intramolecular Friedel-Crafts (IFC) reaction of (Z)-4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) catalyzed by H₃PW₁₂O₄₀ supported on neutral alumina under microwave irradiation has been developed. The reaction is straightforward and allows easy isolation of the product. The catalyst could be re-used up to four times after simple filtration.     

A theoretical study of the chemical reaction between ethylene and N2H2

The interaction between the molecules ethylene and cis-N₂H₂ has been studied using a gaussian basis in a series of ab initio SCF calculations. The results obtained indicate that the synchronous hydrogen transfer reaction is a one-step reaction having an activation energy of around 60 kcal/mol. Our results do not lend support to the hypothesis that the rate of the overall reaction between C₂H₄ and N₂H₂ is controlled by the rate of isomerization of trans-diimide to the cis form.     

Adiabatic explosion in the flash photolysis of CIFCl2H2 mixtures

Incubation period and explosive limits in the flash photolysis of a CIFCl₂H₂ mixture has been measured. The ratio of rate constants k₃₁/k₁₃ for the reversible reaction Cl+CIF α Cl₂ + F (k₁₃ is the rate constant for the forward reaction, k₃₁ for the back reaction) was measured: k₃₁/k₁₃ = 270 ? 65 (T = 295 K). Photothermal explosion theory has been generalized for the case of a chain process with the three active centers.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Addition of lithium ethyl fluoroacetate to cis and trans α,β-epoxyaldehydes. Access to C2 fluorinated butyrolactones

The aldolisation reaction of lithium ethyl fluoroacetate with cis and trans α,β-epoxyaldehydes in their racemic forms proceeds with good C₃-OH diastereoselectivity and much less at the C₂-F carbon atom. A two-step reaction on the major aldol compounds (iodination, lactonisation) led to racemic functionalised C₂ fluorinated lactones, possessing a C₂/C₃cis relationship between the fluorine and hydroxyl groups.     

Palladium-catalyzed phenyl-selenylation with n-Bu3SnSePh in one-pot two-step reactions

We have studied the Pd-catalyzed cross-coupling reaction of a stannane derived from selenium n-Bu₃SnSePh (1) with aryl and perfluoroalkyl iodides. Herein a very efficient one-pot two-step selenylation reaction to form a C-Se bond is reported. Ph₂Se₂ reacts with Na metal in liquid ammonia yielding PhSe⁻ ions. To this solution n-Bu₃SnCl was added to afford 1, which was introduced in the palladium-catalyzed coupling reaction without isolation. These reactions afford functionalized diarylselenides and phenylperfluroalkyl selenides from good to high yields (38-98%).     

Synthesis, spectroscopic studies and crystal structure of a polyoxoanion cluster incorporating para-bromophenylimido ligand, (Bu4N)2[Mo6O18(NC6H4Br-p)]

An organic-inorganic hybrid compound, (Bu₄N)₂[Mo₆O₁₈(NAr)] (Ar = p-BrC₆H₄) has been synthesized via the DCC dehydrating protocol of the reaction of [α-Mo₈O₂₆]⁴⁻ with 4-bromoaniline hydrochloride in anhydrous acetonitrile, which has been characterized by UV-Vis spectra, ¹H NMR and single crystal X-ray diffraction study. By comparing the UV-Vis spectra, which were used to monitor the reaction, the optimum preparative condition for this compound was also determined. This compound crystallizes in the monoclinic space group P2₁/n, which is featured in a terminal para-bromophenylimido group linked to an Mo atom of a hexamolybdate cluster by a Mo-N triply bond. In addition, there are π-π dimerization of the neighboring cluster anions though the parallel aromatic rings in their crystals.     

Mechanism of the reaction of N-p-tosylsulphilimine and related compounds with thiophenolate ion

The reaction of alkyl aryl N-p-tosylsulphilimines with thiophenolate ion was found to afford quantitatively the sulphide that arises by an S_N2 like reaction on the carbon atom adjacent to the tri-valent sulphur atom. This reaction was also found to proceed smoothly with such compounds as sulphoxides and sulphones and sulphoxmanes. The kinetic study on the reaction between aryl methyl N-p-tosylsulphilimine with thiophenolate ion in DMF reveals that the reaction is of second order, namely, first order with respect to each thiophenolate ion and the sulphilimine. The enthalpy and entropy of activation for the reaction are ΔH^≠ = ?17· kcal/mol and ΔS^≠ = ?5·7 eu respectively. The effect of substituents in the reaction, p-XC₆H₄⁺(^?SO₂C₆H₄Y-p)CH₃ + p-ZC₆H₄SK is nicely correl with Hammett σ values giving ?_x = + 2·4, ?_y = + 1·2 and ?_z = ?1·8 respectively. Meanwhile, a marked steric retardation by a bulky alkyl group in alkyl phenyl N-p-tosylsulphilimine is observed. Furthermore, from the stereochemical study of the reaction using an optically active sec-octyl phenyl N-p-tosylsulphilimine with thiophenolate ion it is concluded that the reaction proceeds via a typical S_N2 process on α-carbon atom attached to the tri-valent sulphur atom.     

Synthesis, crystal structure, and density of (W1−xAlx)C

A new solid solution system of Al in WC, with the stoichiometry of (W_1−xAl_x)C (x=0.10, 0.25, 0.50, 0.75, 0.86), has been synthesized by a solid-state reaction between W_1−xAl_x alloys and carbon at around 1673 K in vacuum. Environment scanning electron microscope, energy-dispersive analysis of X-ray, X-ray photoelectron spectroscopy, and inductively coupled plasma analyses are used to certify the formation of the products. The mechanism of the solid-state reaction is also discussed. (W_1−xAl_x)C is identified to crystallize in the hexagonal space group P6m2 (No. 187) and belongs to the WC structure type. The atoms of W and Al occupy the same lattice site (1a site) in the cell of (W_1−xAl_x)C. The cell parameters for each specimen in the phase of W-Al-C are quite close to that of WC, while their densities are far lower than that of WC.     

Stereoselective synthesis of CF3-substituted trans- and cis-enediynes via carbocupration or hydrostannation reactions of CF3-containing diyne

CF₃-containing diyne, readily prepared from (Z)-2,3,3,3-tetrafluoro-1-iodoprop-1-ene in two steps, was smoothly subjected to carbocupration reaction with various organocuprates, followed by treatment of the resultant carbocupration adducts with iodine, the corresponding vinyl iodides being formed in good yields in a cis-addition manner. Thus obtained iodide could be successfully converted into CF₃-substituted trans-enediynes in high yields. Also, hydrostannation reaction of the diyne proceeded well in a trans-addition manner to give the corresponding vinylstannane in high yield. The vinylstannane was also found to be effectively convertible to CF₃-substituted cis-enediynes in high yields.     

Etude de la reaction de (MClcod)2 (M = Ir,Rh) avec les coordinats PClxPh3-x dans CDCl3

An NMR study of the reaction of (MClcod)₂ (M = Ir, Rh; cod = 1,5-cyclo-octadiene) with the ligands PCl_xPh_3-x, has been developed. Except when x = 3 we obtained as the first step the complex MClcod(PCl_xPh_3-x). This compound reacted with an excess of phosphine if x = 1 or 2, to give the complex MCl-(PCl_xPh_3-x)₃. However if M = Ir we have shown the formation of an intermediate species IrClcod(PCl_xPh_3-x)₂. We have studied the kinetics of the reaction:

When x = 3, we obtained the complexes (IrClcod)₂(PCl₃) and (IrClcod)₂(PCl₃)₃, for which we propose the structures.