Radical mediated-direct conversion of aldehydes into acid bromides

A method of preparing acid bromides directly from aldehydes with Br₃CCO₂Et under radical conditions was developed. Aromatic aldehydes with electron-donating group were found to be more reactive than aromatic aldehydes with electron-withdrawing group and aliphatic aldehydes under reaction conditions.     

A new synthesis of β,γ-unsaturated esters from three components, aldehydes, chloromethyl p-tolyl sulfoxide, and tert-butyl acetate, via magnesium carbenoid 1,2-CH and 1,2-CC insertion as the key reaction

Addition reaction of 1-chlorovinyl p-tolyl sulfoxides, which were derived from various aldehydes, with lithium enolate of tert-butyl acetate at −78 °C in THF gave adducts in high yields. Magnesium carbenoids were generated by treatment of these adducts with Grignard reagents via the sulfoxide-magnesium exchange reaction. When the adducts were derived from alkyl aldehydes or electron-deficient aromatic aldehydes, carbenoid 1,2-CH insertion reaction took place from the magnesium carbenoids to afford β,γ-unsaturated butyric esters having a substituent at the β-position. On the contrary, when the adducts were derived from electron-rich aromatic aldehydes, carbenoid 1,2-CC insertion reaction took place from the magnesium carbenoids to give β,γ-unsaturated butyric esters having the aromatic group at the γ-position. Highly stereospecific 1,2-CC insertion reactions were observed in the latter reactions. This procedure provides a good way for a synthesis of β,γ-unsaturated esters from aldehydes with two carbon-carbon bond-formations.     

Ruthenium(II)-salen complexes-catalyzed olefination of aldehydes with ethyl diazoacetate

Several salen-ruthenium(II) complexes, which are derived from commercial ligands or simply ethylenediamine, can be successfully applied as catalysts for the olefination of a broad variety of aldehydes. Depending on the electron richness of the applied aldehydes, good to very good olefin yields and high E:Z selectivities are reached at 60 or 80 °C reaction temperature with ethyl diazo acetate being the reaction partner. The reaction rate depends on the electron donor capabilities of the aldehydes. Electron poor aldehydes undergo faster reactions than electron rich aldehydes, but both electron rich and bulky aldehydes can be transformed to corresponding olefins in very good yields and high E-selectivity.     

Fatty aldehydes of the phosphatidylethanolamines of marine invertebrates

The compositions of the fatty aldehydes from the phosphatidylethanolamines of 26 species of marine invertebrates belonging to nine classes of six types have been investigated. It has been shown that for the aldehydes of all the animals investigated a high degree of saturation and the presence of substantial amounts of branched aldehydes and aldehydes with odd numbers of carbon atoms in the chain of the molecule are characteristic. The amounts of the main — 16:0, 18:0, 18:1, and 20:1 — aldehydes changes appreciably according to the systematic position occupied by the animal; the nature of their distribution can serve to a certain extent as a chemotaxonomic marker. The bryozoanBugula neritina differs from all the other animals studied by an unusually high content of the 17:0 aldehyde and the almost complete absence of unsaturated aldehydes.Institute of Marine Biology, Far Eastern Branch, Academy of Sciences of the USSR, Vladivostok. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 621–625, September–October, 1989.     

Fatty aldehydes of the phosphatidylethanolamines of marine invertebrates

The compositions of the fatty aldehydes from the phosphatidylethanolamines of 26 species of marine invertebrates belonging to nine classes of six types have been investigated. It has been shown that for the aldehydes of all the animals investigated a high degree of saturation and the presence of substantial amounts of branched aldehydes and aldehydes with odd numbers of carbon atoms in the chain of the molecule are characteristic. The amounts of the main — 16:0, 18:0, 18:1, and 20:1 — aldehydes changes appreciably according to the systematic position occupied by the animal; the nature of their distribution can serve to a certain extent as a chemotaxonomic marker. The bryozoanBugula neritina differs from all the other animals studied by an unusually high content of the 17:0 aldehyde and the almost complete absence of unsaturated aldehydes.     

A facile non-oxidative method for synthesizing 1,3-disubstituted pyrroles from pyrrolidine and aldehydes

Reactions of pyrrolidine with 2 equiv of aldehydes without any catalyst in a pressurized vessel at 140–200 °C yielded 1,3-disubstituted pyrroles. -Branched aldehydes gave fairly good yields of the corresponding products by this method, which provides a facile non-oxidative procedure for synthesizing 1,3-dialkylpyrroles from inexpensive pyrrolidine and aldehydes.     

Aldehyde separation by polymer-supported oligo(ethyleneimines)

Chlorosulfonated styrene (10%) divinylbenzene resin beads reacted with an excess of ethylenediamine (EDA), diethylenetriamine (DETA), and triethylenetetramine (TETA) to give the corresponding sulfonamides with pendant oligo(ethyleneimines). The resulting modified resins are useful in the separation of aldehydes from hydrocarbon mixtures. Sorption of aldehydes occurs through formation of both Schiff base and five-membered (imidazoline) rings. Sorbed aldehydes can readily be stripped from the resins by treating with dilute acid solutions. Since the sulfamide bond has a reasonable stability toward acid-base hydrolysis, the loaded resins can be regenerated and recycled by simple acid-base washings, without losing their activity. In the present study, sorption and desorption kinetics of acetaldehyde, benzaldehyde, and salicylaldehyde have been investigated under different conditions. The aldehyde sorption obeys second-order kinetics. The method presented is applicable for all aromatic aldehydes. However, in the case of aliphatic aldehydes carrying an α-hydrogen, aldol condensation products form in solution. So aliphatic aldehydes and their aldol products are sorbed together by the resins. This limits the recovery of aliphatic aldehydes. Consequently, the resins described are cost effective sorbents for the removal and recovery of aromatic aldehydes from various mixtures. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2857–2864, 1997     

Asymmetric aldol reaction using a very simple primary amine catalyst: divergent stereoselectivity by using 2,6-difluorophenyl moiety

Asymmetric aldol reactions of aliphatic ketones or aldehydes with aromatic aldehydes or isatins were catalyzed by a very simple and flexible N-(2,6-difluorophenyl)-l-valinamide. Interestingly, stereochemical course of the reaction of hydroxyacetones or α-branched aliphatic aldehydes as aldol donors was different from that of cycloalkanones.     

A synthesis of di- and tri-substituted β,γ-unsaturated esters from aldehydes by the magnesium carbenoid 1,2-CH and 1,2-CC insertion as the key reaction

Addition reaction of 1-chlorovinyl p-tolyl sulfoxides, which were derived from aldehydes, with lithium enolate of tert-butyl acetate at −78 °C in THF gave adducts in high yields. Treatment of these adducts with Grignard reagents resulted in the formation of magnesium carbenoids via the sulfoxide-magnesium exchange reaction. When the adducts were derived from alkyl aldehydes or electron-deficient aromatic aldehydes, carbenoid 1,2-CH insertion reaction took place from the magnesium carbenoids to afford β,γ-unsaturated butyric esters having a substituent at the β-position. On the other hand, when the adducts were derived from electron-rich aromatic aldehydes, carbenoid 1,2-CC insertion reaction took place from the magnesium carbenoids to give β,γ-unsaturated butyric esters having the aromatic group at the γ-position. Highly stereospecific 1,2-CC insertion reactions were observed in the latter reactions. When the addition reactions were quenched with iodoalkanes, the alkylated adducts were obtained in quantitative yields. Tri-substituted β,γ-unsaturated esters, or in some case γ,δ-unsaturated esters, were obtained by the treatment of the alkylated adducts with EtMgCl. These procedures provide a good way for a new synthesis of di- and tri-substituted β,γ-unsaturated esters from aldehydes with two or three carbon-carbon bond-formations.     

Proline-catalyzed asymmetric aldol reactions of tetrahydro-4H-thiopyran-4-one with aldehydes

Proline-catalyzed enantioselective direct intermolecular aldol reactions of tetrahydro-4H-thiopyran-4-one with various aldehydes give anti adducts with high diastereo- and enantioselectivities in moderate to excellent yields. With the aromatic aldehydes best results were obtained in wet DMF whereas dry DMSO generally was superior with the aliphatic aldehydes. Desulfurization of the adducts with Raney Ni provides products equivalent to aldols from 3-pentanone with potential applications in polypropionate synthesis.     

Rhodium‐catalyzed ortho‐C‐H olefination of aromatic aldehydes employing transient directing strategy

A Rhodium(III)‐catalyzed ortho‐C‐H olefination of aromatic aldehydes in the presence of catalytic amount of TsNH₂ has been developed. The in situ generated imine intermediate from aldehyde and TsNH₂ worked as a transient directing group. Both electron‐rich and electron‐deficient aromatic aldehydes were tolerated, affording the corresponding products in moderate to good yields. Importantly, the present protocol provides a straightforward access to olefinated aromatic aldehydes with aldehydes as the simple starting materials.     

Synthesis of amides through the Cannizzaro-type reaction catalyzed by lanthanide chlorides

Amidation of aldehydes with lithium amides through the LnCl₃-catalyzed Cannizzaro-type reactions afforded a variety of amides in high yields. The electronic and steric effects on the reaction were investigated. The features of the economical catalysts, high yields, tolerance of a wide range of lithium amides and aromatic aldehydes make this methodology an easy and valid contribution to the direct synthesis of amides from aldehydes.     

Efficient organocatalyzed solvent-free selective synthesis of conjugated enones

A series of conjugated dienones and enones were synthesized by a reaction of both conjugated and simple aldehydes, respectively, with 1,3-dicarbonyl compounds and aldehydes under solvent-free conditions at room temperature in the presence of 10 mol % of l-proline as catalyst. The selective formation of one isomer was observed exclusively with most of the 1,3-dicarbonyl compounds and aldehydes. The most commonly formed xanthene derivative from the cyclic diketones is inhibited with our protocol, with the exclusive formation of conjugated dienones only.     

Simple Synthesis of Geminal Diacetates (Acylals) of Aromatic Aldehydes

The geminal diacetates of aromatic aldehydes were prepared from corresponding aldehydes by refluxing with acetic anhydride without any catalysts or even any additional solvent.     

Diastereoselective Pictet-Spengler condensation of tryptophan with α-amino aldehydes as chiral carbonyl components

The Pictet-Spengler reaction of Trp with α-amino aldehydes derived from l and d-amino acids was studied in terms of double stereodifferentiation. The results observed for d-amino aldehydes represent ‘matched’ situation (one diastereoisomer was formed) whereas with l-amino aldehydes ‘mismatched’ (two diastereoisomers were formed). The conformation of newly formed six-membered ring was analyzed. It was found that stable conformers were different for cis and trans isomers.     

Quantitative Analysis of aliphatic aldehydes by headspace SPME sampling and ion-trap GC-MS

Summary A fast and simple headspace SPME sampling method has been developed for quantification of volatile aliphatic aldehydes in sunflower oil. Analysis has been performed by gas chromatography, on a 30m×0.25 mm i.d. ×0.25 μm CP-Wax 52CB column, with mass spectrometric detection. Carryover from the SPME fiber could be eliminated by heating the fiber in the injection port between runs. Response factors of all the compounds were linear for concentrations up to 100 ng μL⁻¹. The slopes of the calibration curves decrease with the amount of saturation of the aldehydes. The average responses for unsaturated aldehydes were twice as high as those for the saturated variety. Responses for dienes were approximately one order of magnitude higher than for saturated aldehydes. Depletion of the analyte was examined by repeated extraction from the same vial. SPME was optimized—after 30 min extraction most components were found to have reached equilibration. The detection limit for the compounds studied varied between 0.1 and 1 ng μL⁻¹. Distribution constants were determined for ten different aldehydes and Henry's constants were calculated for unsaturated aldehydes. There was a definite relationship between the response factors and the amount of saturation of the aldehydes. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Transition metal-free synthesis of primary amides from aldehydes and hydroxylamine hydrochloride

Primary aromatic amides can be synthesized from aldehydes and hydroxylamine hydrochloride in the presence of Cs₂CO₃. Various aromatic aldehydes (include some heteroaromatic aldehydes) are able to generate the corresponding aromatic amides in moderate to excellent yields.     

Studies on the role of Lewis basicity of the aldehydes utilized in the enantioselective Mukaiyama aldol reaction promoted by chiral 1,3,2-oxazaborolidin-5-ones

N-Tosyl-2-1,3,2-oxazaborolidin-5-one 1 was used to probe the role of the Lewis basicity of aldehydes utilized in Mukaiyama aldol reactions promoted by oxazaborolidin-5-ones. Eight aldehydes were each allowed to undergo a Mukaiyama aldol reaction with ketene silyl acetal derived from methyl isobutanoate. Lewis basicity of the aldehydes was determined computationally. The best results were obtained with isobutyl aldehyde and 3,4,5-trimethoxy benzaldehyde (91% and 85% ee). The best fit of ee as a function of Lewis basicity gave a correlation of R²=0.79 [when two ortho-substituted aldehydes were excluded] suggesting that Lewis basicity of O_CHO can play a role in reactions of aldehydes promoted by 1.     

Synthesis of tetrahydrofuran aldehydes

Summary The acetals of furan aldehydes were hydrogenated in the liquid phase on Raney nickel to the corresponding acetals of tetrahydrofuran aldehydes, from which the tetrahydrofuran aldehydes were obtained by hydrolysis.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 357–359, February, 1965     

Determination of linear aliphatic aldehydes in heavy metal containing waters by high-performance liquid chromatography using 2,4-dinitrophenylhydrazine derivatization

A simple and sensitive method is described for the determination of picomolar amounts of C₁–C₉ linear aliphatic aldehydes in waters containing heavy metal ions. In this method, aldehydes were first derivatized with 2,4-dinitrophenylhydrazine (DNPH) at optimized pH 1.8 for 30 min and analyzed by HPLC with UV detector at 365 nm. Factors affecting the derivatization reaction of aldehydes and DNPH were investigated. Cupric ion, an example of heavy metals, is a common oxidative reagent, which may oxidize DNPH and greatly interfere with the determination of aldehydes. EDTA was used to effectively mask the interferences by heavy metal ions. The method detection limits for direct injection of derivatized most aldehydes except formaldehyde were of the order of 7–28 nM. The detection limit can be further lowered by using off-line C₁₈ adsorption cartridge enrichment. The recoveries of C₁–C₉ aldehydes were 93–115% with a relative standard deviation of 3.6–8.1% at the 0.1 μM level for aldehydes. The HPLC–DNPH method has been applied for determining aldehyde photoproducts from Cu(II)–amino acid complex systems.