3d金属离子对H2O2氧化活性艳红的催化性能

以H2O2氧化活性艳红为研究对象,探讨了七种3d金属离子的催化性能、影响因子及其作用、氧化降解动力学和催化作用机理．通过对pH值、氧化剂用量、金属离子浓度、温度的影响研究,确定了七种3d轨道过渡金属离子的催化性能大小为：Fe^3＋〉Cu^2＋〉Co^2＋〉Mn^2＋〉Cr^3＋〉Ni^2＋〉Zn^2＋．在此基础上得到了该催化氧化反应的一级动力学模型,通过一级动力学模型求得各个金属离子的表观活化能,从活化能的大小得出受温度影响大小的顺序为：Cr^3＋〉Mn^2＋〉Co^2＋〉Cu^2＋〉Ni^2＋〉Zn^2＋〉Fe^3＋．     

Use of miniaturised isotachophoresis on a planar polymer chip to analyse transition metal ions in solutions from metal processing plants

An electrolyte system, using malic acid as a complexing agent, has been developed to allow the determination of transition metal cations using miniaturised isotachophoresis. The method allowed the simultaneous determination of Mn2+, Cr3+, Fe2+, Co2+, Zn2+ and Ni2+ to be made without interference from other common ions. Limits of detection were calculated to be in the range 0.5-1.0mg l(-1) for Mn2+, Cr3+ Co2+ and Zn2+ and 2.0 mg l(-1) for Fe2+ and 4.7 mg l(-1) for Ni2+. The successful analysis of five industrial samples, containing a range of these metal ions, obtained from metal processing plants were achieved in under 13 min. The separations were performed on a poly(methyl methacrylate) chip with integrated platinum wire conductivity detection electrodes.     

吡咯并[2,1,5-cd]中氮茚酰腙衍生物的合成及Cu2+荧光探针行为

设计合成了吡咯并[2,1,5-cd]中氮茚酰腙衍生物6. 测试了其紫外光谱和荧光光谱, 研究了其对铜离子的选择性识别作用. 结果表明, 化合物6作为铜离子荧光探针, 受常见离子干扰较小, 对于铜离子有着较高的选择性和较低的检出限.     

Transfer of a quadridentate N2S2 ligand from M2+ (M=Cr,Mn, Fe,Co or Ni) to Cu2+: Unexpected reactivities of bimetallic intermediates

A series of complexes of stoichiometry [MX2(dipyS)] {dipyS = bis(2–picolyl)-1,3–dithiopropane); M=Cr, Mn, Fe, Co, Ni, X=Cl; M=Ni or Cu, X=NO3} and [VOCl(dipyS)]Cl have been prepared and characterised, including the X-ray crystal structure of [Ni(ONO2)2(dipyS)]. The kinetics of the transfer of dipyS from these complexes (M=Cr, Mn, Fe, Co or Ni) to Cu2+, to form [Cu(dipyS)]2+, have been studied in MeOH. For M=Ni, the kinetics are consistent with a mechanism involving rate-limiting dissociation of the initial pyridyl—M bond. Subsequent binding of Cu2+ to the pendant pyridyl-residue (or binding Cl– to the vacant site on M) is followed by the complete transfer of dipyS from M to Cu. For M=Cr, Mn or Co, the same mechanism is believed to operate, but in these cases intermediates in the dipyS transfer to Cu2+ have been detected spectroscopically. Evidence is presented that these intermediates have Cu2+ bound to a pendant pyridyl-group on [MCl2(dipyS)] and that the subsequent complete transfer of dipyS involves rate-limiting dissociation of a M—S bond. For M=Fe, e.p.r. spectroscopy shows that the complex is a dimer in solution. However, the transfer reaction with Cu2+ involves an analogous intermediate to that with M=Cr, Mn or Co, but only at high concentrations of Cu2+. Unexpectedly, the binding of Cu2+ inhibits the transfer of dipyS from Fe to Cu. The electronic factors which give rise to this behaviour are discussed.     

Ferrocene-cyclam: a redox-active macrocycle for the complexation of transition metal ions and a study on the influence of the relative permittivity on the coulombic interaction between metal cations

The reaction of 1,1'-ferrocene-bis(methylenepyridinium) salt with 1,4,8,11-tetraazacyclotetradecane-5,12-dione, followed by LiAlH4 reduction results in the formation of FcCyclam. Metal complexes of FcCyclam with M2+ = Co2+, Ni2+, Cu2+, and Zn2+ were synthesized from FcCyclam and the respective metal triflates. The complexation of Cu2+ and FcCyclam in CH3CN is preceeded by a rapid electron transfer, followed by a slower complex formation reaction and a reverse electron transfer. The protonation constants of FcCyclam and the stability constants for the Cu2+ complex of FcCyclam (logK = 9.26(4) for the formation of the [Cu(FcCyclam)]2+ complex) were determined in 1,4-dioxane/water 70:30 v/v, 0.1 moldm(-3), KNO3, 25 degrees C. By using FcCyclam one can selectively sense the presence of Cu2+ ions in the presence of Ni2+, Zn2+, Cd2+, Hg2+, and Pb2+ with a very large deltaE approximately 200 mV, depending on pH. The X-ray crystal structures of FcCyclam and of complexes with Co2+, Ni2+, Cu2+, and Zn2+ were determined and Fe-M2+ distances obtained: Fe-Co2+ 395.9, Fe-Ni2+ 385.4, Fe-Cu2+ 377.7, and Fe-Zn2+ 369.0 pm. The redox potential of FcCyclam is influenced in a characteristic manner by the complexation of M2+. A linear correlation of 1/r approximately/= deltaE [r = distance Fe-M2+ from crystal data, deltaE=-E1/2([M(FcCyclam)]2+) - E1/2(FcCyclam)] was found; this is indicative of a mainly Coulomb type interaction between the two metal centers. The nature of the Fe...M2+ interaction was also investigated by determining deltaE in several solvents (mixtures) of different dielectric constants epsilon. The expected relation of deltaE approximately/= 1/epsilon was only found at very high values of epsilon. At epsilon < 40 increased ion-pairing appears to reduce the effective positive charge at M2+ leading to progessively smaller values of deltaE with lowered epsilon. The dependence of deltaE and epsilon can be calculated semiquantitatively by combining the Fuoss ion-pairing theory with the Coulomb model.     

Irving-Williams order in the framework of connectivity index ³χv enables simultaneous prediction of stability constants of bivalent transition metal complexes

Logarithms of stability constants, log K? and log β?, of the first transition series metal mono- and bis-complexes with any of four aliphatic amino acids (glycine, alanine, valine and leucine) decrease monotonously with third order valence connectivity index, 3χv, from Cu2+ to Mn2+. While stability of the complexes with the same metal is linearly dependent on 3χv, stability constants of Mn2+, Fe2+, Co2+, and Ni2+complexes with the same ligand show a quadratic dependence on 3χv. As Cu2+ complexes deviate significantly from quadratic functions, models for the simultaneous estimation of the stability constants, yielding r = 0.999 (S.E. = 0.05) and r = 0.998 (S.E. = 0.11), for log K? and log β?, respectively, were developed only for Mn2+, Fe2+, Co2+, and Ni2+ complexes with amino acids.     

Structural characterization and formation mechanism of sitting-atop (SAT) complexes of 5,10,15,20-tetraphenylporphyrin with divalent metal ions. Structure of the Cu(II)-SAT complex as determined by fluorescent extended X-ray absorption fine structure

The UV-vis absorption spectra and the formation kinetics of sitting-atop (SAT) complexes (M(H2tpp)2+) of 5,10,15,20-tetraphenylporphyrin (H2tpp) with a series of divalent metal ions (M2+ = Mn2+, Fe2+, Co2+, Ni2+, Cu2+, and Zn2+) in acetonitrile have been investigated. The structural characteristics of the SAT complexes for a series of M2+ ions are discussed on the basis of the UV-vis absorption spectra. The structure parameters around Cu2+ in the Cu(II)-SAT complex were determined by a fluorescent EXAFS method: the coordination number is 6 with three kinds of Cu-N interactions having bond lengths of 2.05, 1.98, and 2.32 A for pyrrolenine nitrogens of H2tpp, acetonitrile nitrogens at equatorial sites, and acetonitrile nitrogens at axial sites, respectively. The rate constants at 25 degrees C for the formation of the SAT complex in acetonitrile are as follows: kf/mol-1 kg s-1 = 3.4 x 10(2) for Mn2+, 0.18 for Co2+, 1.6 x 10(-3) for Ni2+, and 61 for Zn2+. The finding that the variation trends in the rate constants for a series of M2+ ions for the SAT complex formation and the solvent exchange reaction in various solvents are very similar indicates that the rate-determining step for the SAT complex formation is the interchange between the coordinating nitrogen of a bound acetonitrile and the pyrrolenine nitrogen of H2tpp. The fact that the values of kf are smaller by 4-6 orders of magnitude in comparison with those of the solvent exchange suggests that there is a large energetic loss due to the fast preequilibria prior to the rate-determining step, such as deformation of a porphyrin ring and outer-sphere encounter formation due to an electrostatic interaction between M2+ and the local negative charge on the pyrrolenine nitrogens. We observed the subsequent formation of the corresponding metalloporphyrins by deprotonation of the SAT complex and oxidation of the M2+ center, of which the dynamic behavior was significantly different for the different M2+ ions.     

基于双控荧光开关的NOR和OR分子逻辑门

合成了L-精氨酸蒽衍生物1, 考察了碱土及过渡金属离子对主体分子1荧光光谱的影响, 结果发现, 在中性水溶液条件下只有Cu2＋能有效地猝灭其荧光. 另外, 通过OH－/H＋和Cu2＋/乙二胺四乙酸(EDTA)均能对化合物1的荧光强度进行可逆性调控. 在此基础上, 我们以化合物1水溶液作为起始状态, 以OH－和Cu2＋为两化学输入, 构建了一个“或非”(NOR)分子逻辑门; 以1-Cu2＋水溶液体系作为起始状态, 以H＋和EDTA为两化学输入, 构建了一个“或”(OR)分子逻辑门.     

水杨醛-4-甲氧基苯甲酰腙识别锌离子的研究

设计合成了荧光传感分子水杨醛-4-甲氧基苯甲酰腙(SAMB),通过IR、1HNMR和元素分析确证了其结构,利用紫外-可见吸收光谱和荧光光谱考察了其对不同阳离子的识别作用。结果表明,SAMB的荧光发射对锌离子表现出高选择性响应,且形成1∶1型配合物。乙醇中锌离子的加入导致SAMB的荧光增强328倍,而其他过渡金属离子只引起SAMB的荧光的略微增强。初步探讨了受体分子与锌离子的结合模式与荧光增强机理。     

两种磺酰胺类化合物的合成及其对Fe3+的氧化-还原荧光“开-关”性质

合成了两种磺酰胺类化合物, 并研究了其荧光性能. 通过它们对金属阳离子的选择性识别实验, 发现其在乙醇水溶液中均对Fe3+有专一性的识别作用, 并在NH2OH·HCl和H2O2的存在下, 两种化合物对Fe3+都具有氧化-还原荧光“开-关”作用.     

Preparation and characterization of thiacalix[4]arene coated water-soluble CdSe/ZnS quantum dots as a fluorescent probe for Cu2+ ions

Highly fluorescent water-soluble CdSe/ZnS (core/shell) quantum dots (QDs) as a fluorescent Cu2+ ion probe were synthesized using thiacalix[4]arene carboxylic acid (TCC) as a surface coating agent. Hydrophobic trioctylphosphine oxide (TOPO) capped CdSe/ZnS QDs were overcoated with TCC in tetrahydrofuran at room temperature, and deprotonation of the carboxyl groups of TCC resulted in the formation of water-soluble QDs. The surface structure of the QDs was characterized by using transmission electron microscopy (TEM) and fluorescence correlation spectroscopy (FCS). TEM images showed that TCC-coated QDs were monodispersed with the particle size (core-shell moiety) of approximately 5 nm. Hydrodynamic diameter of the TCC-coated QDs was determined to be 8.9 nm by FCS, showing that the thickness of the surface organic layer of the QDs was approximately 2 nm. These results indicate that the surface layer of TCC-coated QDs forms a bilayer structure consisting of TOPO and TCC molecules. TCC-coated CdSe/ZnS QDs were highly fluorescent (quantum yield, 0.21) compared to the QDs surface-modified with mercaptoacetic acid and mercaptoundecanoic acid. Fluorescence of the TCC-coated QDs was effectively quenched by Cu2+ ions even in the presence of other transition metal ions such as Cd2+, Zn2+, Co2+, Fe2+, and Fe3+ ions in the same solution. The Stern-Volmer plot for the fluorescence quenching by Cu2+ ions showed a linear relationship up to 30 microM of Cu2+ ions. The ion selectivity of TCC-coated QDs was determined by measurements of fluorescence responses towards biologically important transition metal ions (50 microM) including Fe2+, Fe3+, Co2+>Zn2+, Cd2+. The fluorescence of TCC-coated QDs was almost insensitive to other biologically important ions such as Na+, K+, Mg2+, and Ca2+, suggesting that TCC-coated QDs can be used as a fluorescent Cu2+ ion probe for biological samples. A possible quenching mechanism by Cu2+ ions was also discussed on the basis of a Langmuir-type adsorption isotherm.     

过渡元素杂多钨硅酸盐氧化还原性质的研究

本文通过极谱和循环伏安法,结合紫外光谱和X射线光电子能谱,研究了过渡元素钨硅杂多酸盐Kn[SiM(H2O)W11O39](M=Mn^2^+,Fe^3^+,Co^2^+,Ni^2^+,Zn^2^+,Cd^2^+)在溶液中的氧化还原性质,提出了它们的还原机理.杂多阴离子的极谱半波还原电位E1/2的顺序为Ni^2^+>Co^2^+>Zn^2^+>Fe^2^+>Mn^2^+,发现杂多阴离子的E1/2与其组分中的过渡元素的电负性X和过渡金属离子与水合电子反应速率常数的对数logke-分别有线性关系,讨论了过渡元素对杂多阴离子氧化还原性的影响.     

1-乙酰基-3-(2-羟基-4,6-二甲氧基苯基)-5-芳基-2-吡唑啉的合成及Cu2+荧光探针行为

设计合成了6个1-乙酰基-3-(2-羟基-4,6二甲氧基苯基)-5-芳基-2-吡唑啉化合物4a～4f.测试了它们的紫外光谱和荧光光谱,研究了其对铜离子的选择性识别作用.结果表明,化合物4f作为铜离子荧光探针,受常见离子干扰较小,对于铜离子有着较高的选择性和较低的检出限.     

含二茂铁基为臂的三角架型过渡金属配合物的研究

本文利用2,2',2'-三氨基三乙胺(tren)与二茂铁甲醛(FcCHO)的Schiff碱缩合产物(L)为配体合成了十个三角型过渡金属配合物:[MLX]^2+/1+,M=Zn^2+,Cu^2+,Ni^2+,Co^2+=和MN^2+,X=H~2O或OAc^-,并用电子光谱、红外光谱和顺磁=共振光谱对配合物的结构进行了表征.测定了四个化合物的变温磁化率,实验结果表明二茂铁中磁性的Fe(Ⅱ)离子对配合物的磁性影响很小,整个化合物只显示中心离子的磁性.     

High-voltage contactless conductivity detection of metal ions in capillary electrophoresis

The detection of alkali, alkaline earth and heavy metal ions with a high-voltage capacitively coupled contactless conductivity detector (HV-C(4)D) was investigated. Eight alkali, alkaline earth metal ions and ammonium could be separated in less than 4 min with detection limits in the order of 5 x 10(-8) M. The heavy metals Mn2+, Pb2+, Cd2+ Fe2+, Zn2+, Co2+, Cu2+ and Ni2+ could also be successfully resolved with a 10 mM 2-(N-morpholino)ethanesulfonic acid/DL-histidine (MES/His)-buffer. Zn2+, Co2+, Cu2+ and Ni2+ showed an indirect response. The detection limits for the heavy metals were determined to range from about 1 to 5 microM.     

Metal chelate formation using a task-specific ionic liquid

An imidazolium-based task-specific ionic liquid containing an ethylaminediacetic acid moiety readily results in the formation of 2:1 octahedral chelate complexes with aqueous Co2+, Ni2+, and Cu2+.     

乙醇-硫酸铵双水相萃取镉-碘化钾-罗丹明B离子缔合物

研究了在(NH4)2SO4存在下,碘化钾-罗丹明B-乙醇体系萃取Cd(Ⅱ)的行为及最佳分相条件。实验表明,在pH 1～3时,乙醇-(NH4)2SO4双水相体系对[CdI4]2-络阴离子的萃取率只有35.5%;加入罗丹明B后,该体系能完全萃取镉-碘化钾-罗丹明B形成的离子缔合物,而干扰离子Zn2+、Fe3+、Co2+、Cu2+、Ni2+不被萃取,实现Cd2+与上述离子的分离。     

A new fluorescent chemosensor for copper ions based on tripeptide glycyl-histidyl-lysine (GHK)

[structure: see text]. A new fluorescent chemosensor for Cu2+ ions was synthesized by modifying the tripeptide glycyl-histidyl-lysine (GHK) with 9-carbonylanthracene via the standard Fmoc solid-phase peptide synthesis method. While significant fluorescence quenching was observed from the molecule upon binding with Cu2+, addition of Fe2+, Co2+, Ni2+, and Zn2+ to the peptide solution caused a minimum fluorescence emission spectral change, indicating a high specificity of this chemosensor for Cu2+ ions. Effects of pH were also investigated.     

Uptake of transition metal ions using liposomes containing dicetylphosphate as a ligand.

The uptake of Cu2+ was investigated using various types of liposomes composed of phosphatidylcholine (PC), cholesterol (Chol) and dicethylphosphate (DCP). DCP played a role as a ligand for Cu2+. Multilamellar vesicles (MLVs) were more effective for the uptake of Cu2+ compared to unilamellar vesicles prepared by the extrusion technique. The uptake efficiency of MLVs for Cu2+ was dependent on the molar ratio of DCP in MLVs. The uptake percent of Cu2+ was 92% using MLVs having a PC:DCP:Chol molar ratio of 4:3:3; 95% of the total vesicle Cu2+ was bound to DCP of the outer membrane surface of the MLVs, and the remaining 5% of the total Cu2+ was distributed into the interior side of the MLVs. MLVs having a PC:DCP:Chol molar ratio of 4:3:3 were also effective as separation media for Mn2+, Co2+, Ni2+ and Zn2+. The uptake efficiency of the MLVs for the transition-metal ions increased in the order Co2+ < Zn2+ < Ni2+ < Mn2+ < Cu2+.     

浸渍硅胶薄层色谱板分离钴和镍及数字图像分析法定量(英文)

Thin layer chromatography(TLC) of cobalt and nickel has been performed on silica gel layers induced with alkali mediated cellulose extract.A novel combination of 10% aqueous solutions of Tween-20 and potassium thiocyanate in 1∶1(v/v) was identified as the best mobile phase for the selective separation of Co2+from Ni2+on the impregnated Silica Gel G layers.The chromatographic characteristics of the cations were studied and the limits of detection as well as the limits of quantification for Co2+and Ni2+were determined.The quantitative estimation of the cations was achieved from the digital image analysis of respective chromatograms.The proposed quantitative method was successfully applied with 0-0.50% error for the determination of Co2+from Ni2+in spiked samples of bauxite,soil and rock containing common cations such as Al3+,Fe2+,Ti4+,Zn2+,Mn2+,Cu2+,Cr6+,Mg2+,etc.under the optimized chromatographic conditions.