Photoinduced chirality in achiral liquid crystalline azobenzene polymers containing different polar side groups

Circular dichroism (CD) was induced in the films of two achiral liquid crystalline polymers, poly[(4′-(6-(methacryloyloxy)hexyl)oxy)-(4-X)azobenzene] (PM6X, X = C and N for cyano and nitro, respectively), by irradiation with one handed circularly polarized light (CPL) at 442 nm. The CD and UV spectra of the polymeric films suggest that left-CPL induces a left helical structure and right-CPL reverses the resulting structure into a right helix. For PM6C, the photoinduced CD values of the nematic film are much higher than in the casting and isotropic film. The photoinduced chirality of PM6C films is higher than PM6N due to a higher polarity of nitro groups in PM6N. The PM6N’s CD intensity around 450 nm is increased with the irradiation time of linearly polarized light (LPL) followed by left-CPL irradiation. The correlation between azobenzene chromophores and circularly polarized light will be discussed in the paper.     

Ionic discotic liquid crystals: synthesis and characterization of pyridinium bromides containing a triphenylene core

Five novel pyridinium salts tethered with hexaalkoxytriphenylene molecules were synthesized by the quaternization of pyridine with ω-bromo-substituted triphenylene derivatives. Their chemical structures were determined by ¹H NMR, ¹³C NMR, IR, UV spectroscopy and elemental analysis. The thermotropic liquid crystalline properties of these salts were investigated by polarizing optical microscopy and differential scanning calorimetry. These triphenylene-based pyridinium salts with bromide as counterion were found to be mesomorphic over a wide temperature range.     

Synthesis and characterization of novel imidazolium-based ionic discotic liquid crystals with a triphenylene moiety

Two novel triphenylene-tethered imidazolium salts were synthesized either by the quaternization of 1-methylimidazole with an ω-bromo-substituted triphenylene or by the quaternization of a triphenylene-substituted imidazole with methyl iodide. Their chemical structures were determined by ¹H NMR, ¹³C NMR, IR, UV spectroscopy and elemental analysis. The thermotropic liquid crystalline properties of these salts were investigated by polarizing optical microscopy and differential scanning calorimetry. These triphenylene-based imidazolium salts with bromide or iodide as counterion show columnar mesophase properties over a wide temperature range.     

Synthesis and characterization of halogen-containing ferroelectric liquid crystals and side chain liquid crystalline polymers

A new series of ferroelectric liquid crystals and side chain liquid crystalline polymers based on halogen-containing chiral centres has been synthesized. Chemical structures were analysed by NMR. Liquid crystal phases were characterized by differential scanning calorimetry, optical polarizing microscopy, and X-ray diffractometry. The behaviour of the liquid crystalline phases was investigated as a function of spacer units and differing terminal asymmetric moieties. It was found that phase transition temperatures decreased with increasing length of the oligooxyethylene spacer unit. Differing terminal asymmetric moieties led to differing mesophase phenomena. Furthermore, a wide temperature range (including room temperature) of a chiral smectic C phase was achieved.     

Main chain liquid crystalline polymers with laterally linked organometallic mesogens

The synthesis and characterization of the phase behaviour of a homologous set of polymers of 1,m-diamino-n-alkanes with bis[4-(4-alkoxybenzoyloxy)-2-hydroxybenzaldheyde]copper(II) is reported. The structural peculiarity of these polymers, which is indicated in the title, stems from the presence of metal-complexed salicylideneaminato segments connected via the nitrogen atoms. Calorimetric analysis, polarizing optical microscopy, X-ray diffraction and dynamic viscosity measurements indicate the occurrence of nematic mesomorphism for all the polymers-including two structural analogues containing Ni(II) or Pd(II) in place of Cu(II).     

Synthesis and phase behaviors of side‐chain liquid‐crystalline polymers containing azobenzene mesogen with the different length alkyl tail

A series of side‐chain liquid‐crystal polymers, poly[6‐[4‐(4′‐n‐alkyl benzoateazo)phenoxy]‐hexylmethacrylate]s (PMAzoCOOR_m, m = 1, 2, 3, 4, 5, 6, 8, 10, 14, and 18) have been prepared by two synthetic methods. The chemical structure of the monomers was confirmed by ¹H NMR and mass spectrometry. The molecular characterizations of the polymers were performed with ¹H NMR and gel permeation chromatograph. The phase behaviors of polymers were investigated by the combination of techniques including differential scanning calorimetry, polarized optical microscopy, and small‐angle X‐ray scattering. For m = 1, 2, 3, 4, 5, and 6, the polymers exhibited a monosmectic A phase in which the smectic layer period was almost identical to the side‐chain length. In addition, for m = 2, 3, 4, and 5, they presented the monosmectic C phase in low temperature; moreover, the tilt angle increased from 23.3 to 40.5°. For m = 8, 10, 14, and 18, the polymers showed a bilayer smectic A phase in which the layer spacing was larger than a fully extended side chain but less than two extended chains. On the other hand, for the clearing point, with the increasing of m, it first decreased, and then increased. All of these indicated that the length of alkyl tails played an important role in the phase behaviors of these polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2759–2768     

Chiral side-chain liquid crystalline polysiloxanes bearing fluorinated mesogens and cholesteryl groups

A series of chiral side-chain liquid crystalline (LC) polysiloxanes bearing fluorinated mesogens were synthesized with a cholesteric LC monomer and a fluorinated nematic LC monomer. They were characterized by use of various experimental techniques, and effect of fluorinated mesogens on characteristic of LC polysiloxanes was studied as well. In photoluminescence spectra, a narrow and a broad peak occur at around 270-317 nm, originated, respectively, from fluorinated phenyl groups and the conjugated xenene structure. The specific rotation analysis of all polymers showed negative values, but absolute values were lower than those of the chiral monomers. All polymers showed smectic LC phase with very wide temperature ranges on heating and cooling cycles. Especially, only polymers bearing more fluorinated component exhibited smectic-cholesteric phase transition when they were heated. As the polymers contained more fluorinated mesogens, segregation of the fluorinated segment to the surface should occur at mesomorphic temperature. The highly ordered lamellar mesogen-siloxane matrix systems should be disturbed severely by separation of fluorinated mesogens, suggesting mesogenic orders transition from lamellar smectic to cholesteric phase.     

Synthesis and phase behavior of side‐chain liquid‐crystalline polymers containing malachite green lactone groups

New side‐chain liquid‐crystalline polymers containing both cholesteric and thermochromic side groups were synthesized. Their chemical structures were confirmed with elemental analyses and Fourier transform infrared, proton nuclear magnetic resonance, and carbon‐13 nuclear magnetic resonance spectra. The mesogenic properties and phase behavior were investigated with differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The effect of the concentration of dye side groups on the phase behavior of the polymers was examined. The polymers showed smectic or cholesteric phases. Those polymers containing less than 20 mol % dye groups had good solubility, reversible phase transitions, wider mesophase temperature ranges, and higher thermal stability. The experimental results demonstrated that the isotropization temperature and mesophase temperature ranges decreased with an increasing concentration of dye groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3870–3878, 2004     

Synthesis and characterization of fluorine-containing cholesteric liquid crystalline polysiloxanes bearing trifluoromethyl-substituted mesogens

A series of side-chain liquid crystal (LC) polysiloxanes were synthesised with Poly(methylhydrogeno)siloxane, 4?-(undec-10-enoyloxy) biphenyl – 4 – yl 4- (trifluoromethyl) benzoate (M_th) and a chiral nematic (N*) LC monomer 1-allyl 10-(cholesteryl)-decanedioate (M_ch). The chemical structures and LC properties of the monomers and polymers were characterised by FTIR, ¹H-NMR, differential scanning calorimetry, thermogravimetric analysis, POM and X-ray diffractometer. M_ch is monotropic N* LC. The homopolymer derived from monomer M_ch is enantiotropic N* LC. Monomer M_th is a smectic A liquid crystal. The copolymers derived from M_ch and M_th are N* LCs. The temperatures at which 5% weight loss occurred are greater than 300°C for all the fluoro-containing polymers, and the residue weights of the samples at 600°C increased slightly as the content of trifluoromethyl mesogens increased in the polymers. The glass transition temperatures of the polymers increased as trifluoromethyl mesogens increased, too. The N*–I phase transition temperatures show a negative deviate from ideal or linear behaviour. The values of the enthalpy changes for the cholesteryl containing polymers are rather low and this is attributed to the biaxiality of cholesteryl moiety which tends to reduce the change in the orientational order at the N*–I transition. Compared to the monomers, the polymers show wider mesophase region.     

Influence of alkyl tail length on self-organisation of side-chain liquid crystalline polymers with biphenyl hemiphasmidic mesogens

A new and simple series of side-chain liquid crystalline polymethacrylates containing biphenyl hemiphasmidic mesogens based on 4-[(3,4,5-trialkan)-1-carbonylbenzoate]biphenyl (denoted as PT_mBMA, m = 6, 8, 10, 12, 14, 16, 18, m refers to the carbon number of alkoxy tails) groups was designed and successfully synthesised via free radical polymerisation. The phase structures and transitions of the polymers were investigated by the combination of techniques including differential scanning calorimetry, polarizing microscope, one-dimensional/two-dimensional wide-angle X-ray diffraction, and small-angle X-ray scattering. The experimental results revealed that the liquid crystalline phase structures and behaviours of the polymers were found to be strongly dependent on the alkyl tail length (m). When m = 6, the PT_mBMA formed a stable smectic phase above T_g. When m = 8, 10, 12, 14, 16, 18, the sample presented a hexagonal columnar mesophase (Φ_h), suggesting that the alkyl length has played an important role in the phase behaviours of hemiphasmidic side-chain liquid crystalline polymers.     

Synthesis and properties of mesogen‐jacketed liquid crystalline polymers containing biphenyl mesogen with asymmetric substitutions

This work focuses on the design, synthesis, and characterization of a series of mesogen‐jacketed liquid crystalline polymers (MJLCPs), poly(alkyl 4′‐(octyloxy)‐2‐vinylbiphenyl‐4‐carboxylate) (pVBP(m,8), m = 1, 2, 4, 6, 8, 10, 12). For the first time, we realized asymmetric substitutions in the mesogens of MJLCPs. The polymers obtained by conventional free radical polymerization were investigated in detail by a combination of various techniques, such as differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized light microscopy. Our results showed that all the polymers were thermally stable, and their glass transition temperatures decreased when m increased. The liquid crystalline (LC) phases that developed at high temperatures and disappeared at low temperatures were strongly dependent on the difference in lengths of alkyl groups on the 4 and 4′ substitution positions of the side‐chain biphenyl. While polymer pVBP(1,8) was not liquid crystalline, columnar liquid crystalline phases were observed for all other pVBP(m,8) (m = 2, 4, 6, 8, 10, 12) polymers. Polymer pVBP(8,8) showed a tetragonal columnar nematic liquid crystalline phase, and the other LC polymers exhibited columnar nematic phases. In additions, the smaller the difference in the lengths of the terminal alkyls, the easier the development of the liquid crystalline phase. Birefringence measurements showed that solution‐cast polymer films exhibited moderately high positive birefringence values, indicating potential applications as optical compensation films for liquid crystal displays. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Structure and phase transitions of a liquid crystalline polymer

Summary The structures, textures as well as thermodynamic properties of a side chain polymer exhibiting a liquid crystalline phase in addition to a partially crystalline state and the isotropic fluid state were investigated. Furthermore the kinetics of phase transitions between these states were analyzed. It was found that the properties of this polymer are intermediate between that of low molecular weight liquid crystals and common polymers. In particular it was observed that the relation between the liquid crystalline texture and the structure is different from that of low molecular weight liquid crystals and that the properties of the crystalline and liquid crystalline state depend strongly on the tacticity of the polymer.

---

Zusammenfassung Für ein Seitenkettenpolymeres, das zusätzlich zum teilkristallinen Zustand und zur isotropen Schmelze einen flüssig-kristallinen Zustand aufweist, wurden die Strukturen und Texturen untersucht sowie thermodynamische Eigenschaften. Außerdem wurde die Kinetik der Phasenumwandlungen analysiert. Es zeigt sich, daß die Eigenschaften zwischen denen üblicher Polymerer und denen von niedrigmolekularen flüssigen Kristallen liegen. Insbesondere zeigte sich, daß die Beziehung zwischen molekularer Struktur und Textur von der bei niedrigmolekularen flüssigen Kristallen abweicht, und daß die Taktizität der Kette einen starken Einfluß auf die Eigenschaften nicht nur der kristallinen Phase sondern auch der flüssig-kristallinen Phase ausübt.

     

Sn-containing liquid crystalline side group homopolymers with two glass transitions

Three homologous tin-containing homopolymers with a terminal CN-dipole in the side group have been synthesized and characterized by dynamical calorimetry, polarization microscopy, X-ray and dielectric methods. AFM was used to evaluate the texture at room temperature. Four different phase transitions were detected by DSC. The high temperature phases were identified by polarization microscopy as SmA and SmC. AFM-measurements show focal-conic domains at room temperature and confirm so the smectic nature of all phases. X-ray measurements on nonoriented samples give hints to a phase segregation on nanometer scale. Dielectric investigation and temperature-modulated DSC (TMDSC) confirm clearly phase separation by appearance of two glass transitions related to the liquid order of the main chains and the liquid crystalline of the side groups.     

Interfacial tension of blends containing thermotropic liquid crystalline polymers

A method is proposed to determine the interfacial tension of immiscible blends containing a liquid crystalline polymer (LCP) and a flexible-molecule polymer, under flow conditions. The method is based on Taylor's theorem for immiscible fluids, i.e., that a suspended drop of liquid A in liquid matrix B is deformed in shear or elongational flow in proportion to the ratio of interfacial to viscous stresses. Taylor's theorem, as originally derived, applies to low concentrations, Newtonian fluids and small deformations. Thus, the theorem was modified to account for “Power Law” fluids in elongational flow and large deformations, more applicable to the system under investigation. The elongational viscosities of the LCP and the flexible polymer (polycarbonate) as a function of elongational rate were determined using converging type flow. The two polymers exhibited a Power-Law behavior in elongational flow and, hence, the experimental constitutive equations of state were used to quantify the viscous stresses. The interfacial stresses were modified for large deformations by taking into consideration the deformed shape and hence increased surface area of the elongated LCP particle. Using the modified expression, the interfacial tension of LCP and PC was determined to be in the range of 5–6.6 dyne/cm.     

Properties of blends containing two liquid crystalline polymers

Blends containing two, wholly aromatic, naphthalene-based liquid crystalline polymers (LCPs) are studied. Experimental results show that the viscosities of the resulting blends are lower than the parent LCPs over the entire shear-rate range investigated. The orientation development following capillary flow demonstrates, that over a defined blend composition range, some blends have higher orientability than the constituent polymers. This is further manifested in the tensile and flexural properties of injection-molded specimens. A detailed analysis indicates that in the composition range where synergistic effects are observed in orientation development as well as in mechanical properties, only one glass transition temperature is detected. This suggests that “miscibility” is desirable for obtaining maximum properties in these blend systems.     

Preparation and characterization of side-chain liquid crystalline polymers containing chenodeoxycholic acid residue

A series of new side-chain liquid crystalline polymers containing chenodiol residue derived from 24-[4′-hydroxybiphenyl-4-yl-4-(allyloxy)benzoyloxy]-3α,7α-di{n-[4′-(4-ethoxybenzoyloxy)biphenyl-4-yloxy]-n-oxoalkanoyloxy}-5β-cholane was designed and prepared. The chemical structures of the monomer and polymer were confirmed by Fourier transform infrared and ¹H NMR spectra. The mesomorphic properties of monomer and polymer were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction. The side-chain liquid crystalline polymers revealed wide mesophase temperature range and high thermal stability, and they showed nematic liquid crystalline phase. The influence of flexible space group length on thermal properties and specific rotation was examined.     

Synthesis and characterization of new thermotropic liquid crystalline polymers with paired mesogens containing azobenzene unit: Poly(malonic ester)s

New thermotropic liquid crystalline poly(malonic ester)s with two symmetrical mesogenic units (paired mesogens) were prepared by the polycondensation of 1,6-dibromohexane and novel malonic ester compounds with different flexible ethyleneoxy spacer lengths linked to azobenzene group. All the prepared malonic esters and the resulting polymers exhibited monotropic liquid crystallinity with a nematic texture. The length of the spacer had influence on the temperature of phase transition of them. A possibility of application of the prepared polymers to reversible optical information storage media was also identified through a trans–cis isomerization of azobenzene by UV irradiation.     

Phase behaviour of lyotropic liquid crystalline side chain polymers in aqueous solutions

Amphiphilic lyotropic liquid crystalline surfactants are synthesized displaying 10-undecenoic acid as hydrophobic and ethyleneglycol units as hydrophilic parts of the molecules. By addition reaction of the monomeric surfactants with poly [oxy(methylsilylene)], the surfactants are attached as side chains to the siloxane main chain. The phase behaviour of a polymer-water system and the corresponding monomer-water system is investigated by polarizing microscopy. The monomeric surfactant exhibits a liquid crystallineM ₁-phase of hexagonally packed, rod-like micelles in a concentration range of 49 to 70% surfactant. The liquid crystalline state of the polymeric surfactant is more stable, which is indicated by a broader temperature- and concentration range (35%–90% polymer surfactant). At lower concentration aM ₁-phase exists, which is separated by a cubic phase from a lamellarG-phase at higher concentration of the polymer surfactant. Compared to the monomeric system, the increased stability of the polymeric mesophase can be understood by the restriction of motions of the amphiphiles due to the linkage to the polymer main chain.Dedicated to Prof. Dr. F. H. Müller.The authors are greatly indebted to Wacker Chemie, D-Burghausen, FRG for kindly delivering the poly(hydrogensiloxane).