聚N－烷基丙烯酰胺类凝胶及其温敏特性

研制成功５种聚Ｎ－烷基丙烯酰胺类温敏凝胶：聚Ｎ－异丙基丙烯酰胺（ＰＮＩＰＡ），聚Ｎ－异丙基丙烯酰胺＋甲基丙烯酰胺（ＰＮＩＰＡ／ＭＡＡ），聚Ｎ，Ｎ－二乙基丙烯酰胺（ＰＮＤＥＡ），聚Ｎ－正丙基丙烯酰胺（ＰＮＮＰＡ），聚Ｎ，Ｎ－二乙基丙烯酰胺＋Ｎ－叔丁基丙烯酰胺（ＰＮＤＥＡ／ＮＴＢＡ），并系统研究了这些凝胶的温敏相交特性．以聚Ｎ－异丙基丙烯酰胺（ＰＮＩＰＡ）凝胶相交特性为基础的凝胶萃取过程对牛血清白蛋白和兰葡聚糖溶液的浓缩实验表明，凝胶萃取对于浓缩和制备贵重生化制品是很有效的．     

Cu－Cr_2O_3催化合成丙烯酰胺中铬的助催化作用

Ｃｕ－Ｃｒ_２Ｏ_３催化合成丙烯酰胺中铬的助催化作用李晶明，杨博，周贵林，谢筱帆，李圭甲（中国科学院长春应用化学研究所长春１３００２２）关键词Ｃｕ－Ｃｒ＿２Ｏ＿３催化剂，丙烯腈，丙烯酰胺，催化水合，反应机理在还原铜催化剂中加铬可提高丙烯腈（ＡＮ）催化水...     

部分水解法制备高分子量水溶性（丙烯酰胺／丙烯酸／2—丙烯酰胺—2—？…

系列的谪分子量水溶性丙烯酰胺／丙烯酸／２－丙烯酰胺－２－甲基丙磺酸（ＡＭ／ＡＡ／ＡＭＰＳ）三元共聚物（Ｐ３Ａ）由相应的（ＡＭ／ＡＭＰＳ０二元共聚物通过部分水解方法制得。聚合物的结构和组成使用电位滴定和＾１３Ｃ－ＮＭＲ谱测定,得到的结果指出,在设定的试验条件下,水解过程中,高分子链上ＡＭＰＳ单元具有充分的稳定性,而丙烯酰胺基平稳地转变为丙烯酸。在所有不同聚合物（Ｐ２Ａ）情况下,由于阴离子基团的ＯＨ＾     

聚N－烷基丙烯酰胺类凝胶及其温敏特性

 研制成功５种聚Ｎ－烷基丙烯酰胺类温敏凝胶：聚Ｎ－异丙基丙烯酰胺（ＰＮＩＰＡ），聚Ｎ－异丙基丙烯酰胺＋甲基丙烯酰胺（ＰＮＩＰＡ／ＭＡＡ），聚Ｎ，Ｎ－二乙基丙烯酰胺（ＰＮＤＥＡ），聚Ｎ－正丙基丙烯酰胺（ＰＮＮＰＡ），聚Ｎ，Ｎ－二乙基丙烯酰胺＋Ｎ－叔丁基丙烯酰胺（ＰＮＤＥＡ／ＮＴＢＡ），并系统研究了这些凝胶的温敏相交特性．以聚Ｎ－异丙基丙烯酰胺（ＰＮＩＰＡ）凝胶相交特性为基础的凝胶萃取过程对牛血清白蛋白和兰葡聚糖溶液的浓缩实验表明，凝胶萃取对于浓缩和制备贵重生化制品是很有效的．     

新显色剂2－（5－硝基－2－吡啶偶氮）－5－二甲氨基苯胺与钯显色反应的研究及其应用

用新合成的偶氮试剂２－（５－硝基－２－吡啶偶氮）－５－二甲氨基苯胺（５－ＮＯ＿２－ＰＡＤＭＡ）研究了光度法测定他的反应条件。结果表明，在０．４５～１．２ｍｏｌ／Ｌ盐酸介质中，钯与试剂形成稳定的蓝色配合物，其最大吸收波长位于６２１ｎｍ处，表观摩尔吸收系数为９．４×１０￣４Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１），配合成的组成为Ｐｄ：５－ＮＯ＿２－ＰＡＤＭＡ＝１：２，钯浓度在０～１０μｇ／１０ｍＬ范围内符合比尔定律。本方法是目前测定钯的高灵敏度和高选择性体系之一。用于含钯分子筛及二次合金管理样－８８中微量钯的测定，结果满意。     

DL－丙交酯与2－氢－2－氧－1，3，2－二氧磷杂环己烷的开环共聚合研究

在三异丁基铝催化下ＤＬ－丙交酯与２－氢－２－氧－１，３，２－二氧磷杂环己烷开环共聚，制备了一类新型水溶性共聚物Ｐ（ＬＡ－ｃｏ－ＴＭＰ）。用１ＨＮＭＲ、ＩＲ谱对其结构进行了表征，并研究了催化剂用量及不同单体配比对总转化率、共聚物组成及特性粘度的影响。     

铈（Ⅳ）盐引发丙烯酰胺在β－二羰基结构功能化聚苯乙烯微球上的接枝聚合研究

将乙酰丙酮（ＡｃＡｃ）、乙酰乙酸乙酯（ＡｃＡｃＥ）、苯甲酰基丙酮（ＢｚＡｃ）作为β－二羰基基团通过烷基化反应，引入到氯甲基聚苯乙烯（ＰＳｔ－ＣＨ２Ｃｌ）微球，研究了该微球在硝酸铈铵（ＣＡＮ）存在下引发丙烯酰胺（ＡＡＭ）的接枝聚合，以接技前后β－二羰基功能化聚苯乙烯微球吸水率及氮含量的变化、颗粒的增重、ＥＳＣＡ及ＦＴ－ＩＲ光谱、显微照相等方法，对接枝聚合物进行了表征，并提出了接技聚合反应的机理．     

薄层色谱法分析2-丙烯酰胺基-2-甲基丙烷磺酸

应用薄层色谱法对工业品２ 丙烯酰胺基 ２ 甲基丙烷磺酸（简称ＡＭＰＳ）进行了分析,以硅胶ＧＦ２５４作为吸附剂,从几种溶剂系统中优选了Ｖ（苯）∶Ｖ（甲醇）＝２∶１溶液作为展开剂,用２５４ｎｍ紫外分析仪检测展开后的样品斑点。实验表明：ＡＭＰＳ的Ｒｆ为０３６,而其主要杂质丙烯酰胺（ＡＭ）的Ｒｆ为０．６４;ＡＭＰＳ的最小检出限为５μｇ,展开时间约为２５ｍｉｎ。方法简便、快速、重现性好,有利于在生产过程中快速分析ＡＭＰＳ及其所含杂质,从而指导对ＡＭＰＳ的纯化处理。     

过硫酸胺与N－［（3－二甲氨基）丙基］丙烯酰胺氧化还原引发体系的研究

过硫酸胺与Ｎ－［（３－二甲氨基）丙基］丙烯酰胺氧化还原引发体系的研究司堃，郭新秋，丘坤元（北京大学化学与分子工程学院北京１００８７１）关键词Ｎ－取代丙烯酰胺，氧化还原体系，反应动力学，端基分析，反应机理Ｎ－［（３一二甲氨基）两基］丙烯酸胺（ＤＭＡＰＡ...     

聚（丙烯酰胺—丙烯酸）／聚（丙烯酰胺—二甲基二烯丙基氯化铵）聚电解质复…

通过动态光散射、粘度和透光率测定，研究了聚（丙烯酰胺－丙烯酸）［Ｐ（ＡＭ－ＡＡ）］／聚（丙烯酰胺－二甲基二烯丙基氯化铵）［Ｐ（ＡＭ－ＤＭＤＡＡＣ）］聚电解质复合溶液的结构和性能。结果表明，Ｐ（ＡＭ－ＡＡ）与Ｐ（ＡＭ－ＤＭＤＡＡＣ）复合比、溶液浓度和氯化钠用量影响溶液中复合物的构象和流体力学半径。Ｐ（ＡＭ－ＡＡ）与Ｐ（ＡＭ－ＤＭＤＡＡＣ）分子链间适度的库仑相互作用，可形成均相Ｐ（ＡＭ－ＡＡ）／Ｐ（Ａ     

甲基丙烯酸镉的共聚合及其光学性能研究

合成了一种单体甲基丙烯酸镉（Ｃｄ（ＭＡ）２）,并将Ｃｄ（ＭＡ）２／苯乙烯（Ｓｔ）／甲基丙烯酸（ＭＡ）进行三元共聚,制备得到含Ｃｄ２＋的透明光学树脂,绘制了共聚体系的单体溶解性相图和聚合物透明相图．对聚合物的光学性能研究表明,固定ＭＡ的含量,随着单体中Ｃｄ（ＭＡ）２比例的增加,聚合物树脂的ｎＤ值线性降低而ｖＤ值线性增加．根据测定的聚合物ｎＤ值可以计算出组份的折光指数ｎＤ（ＰＣｄ（ＭＡ）２）＝１５７８８、ｎＤ（ＰＭＡ）＝１４９９２．     

In Silico Discovery of Antimicrobial Peptides as an Alternative to Control SARS-CoV-2

A serious pandemic has been caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The interaction between spike surface viral protein (Sgp) and the angiotensin-converting enzyme 2 (ACE2) cellular receptor is essential to understand the SARS-CoV-2 infectivity and pathogenicity. Currently, no drugs are available to treat the infection caused by this coronavirus and the use of antimicrobial peptides (AMPs) may be a promising alternative therapeutic strategy to control SARS-CoV-2. In this study, we investigated the in silico interaction of AMPs with viral structural proteins and host cell receptors. We screened the antimicrobial peptide database (APD3) and selected 15 peptides based on their physicochemical and antiviral properties. The interactions of AMPs with Sgp and ACE2 were performed by docking analysis. The results revealed that two amphibian AMPs, caerin 1.6 and caerin 1.10, had the highest affinity for Sgp proteins while interaction with the ACE2 receptor was reduced. The effective AMPs interacted particularly with Arg995 located in the S2 subunits of Sgp, which is key subunit that plays an essential role in viral fusion and entry into the host cell through ACE2. Given these computational findings, new potentially effective AMPs with antiviral properties for SARS-CoV-2 were identified, but they need experimental validation for their therapeutic effectiveness.     

Study on copolymerization behavior of 2-substituted 4-methylene-1,3-dioxolane with maleic anhydride and acrylonitrile

Copolymerizations of 4-methylene-2-styryl-1,3-dioxolane ( 1 ) and 4-methylene-2-methyl-2-styryl-1,3-dioxolane ( 2 ) with electron-deficient monomers, such as maleic anhydride (MA) and acrylonitrile (AN) were investigated. Only homopolymer of 1 was obtained from the copolymerization of 1 with MA in the presence or absence of AIBN. The copolymerization of 1 and AN with AIBN as initiator gave a copolymer consisting of three kinds of repeating units. Reaction of 2 with MA gave a crystalline product with and without AIBN present. A nine-membered ring structure is proposed for this product based on its IR, UV, proton and ¹³C-NMR spectra, as well as elemental analysis. No polymer was obtained from the copolymerization of 2 and AN with or without AIBN initiator. Based on the structures of the products obtained from the copolymerization, a number of polymerization mechanisms are proposed. © 1996 John Wiley & Sons, Inc.     

Design,Synthesis and Characterization of 3,4-Dihydro-2H-pyran Containing Copolymer/Clay Nanocomposites

We introduce briefly surface modification of clay minerals, structure, properties and, characterization techniques of polymer-clay (PCN's) nanocomposites. Organically modified layered-silicates or nanoclays have become an attractive class of hybrid materials due to their prospective use in a great variety of applications from industry to health. For design, synthesis and characterization for potential biomedical nanocomposites, antitumor-active copolymer; poly(DHP-alt-MA) were used to prepare copolymer/clay nanocomposites. The functional copolymers, having a combination of rigid/flexible linkages and an ability of complex-formation with interlayered surface of organo-silicate, and their nanocomposites have been synthesized by interlamellar complex-radical copolymerization of intercalated monomer complexes of maleic anhydride (MA) and 3,4-Dihydro-2H-pyran (DHP) with three alkyl ammonium salts surface modified bentonite and monomer mixtures. Poly(DHP-alt-MA) pristine copolymer and poly(DHP-alt-MA)/organically modified bentonite nanocomposites were characterized by Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), HR-Raman, X-ray diffraction (XRD) and TEM methods.     

Structural Stability Among Hybrid Antimicrobial Peptide Cecropin A(1–8)–Magainin 2(1–12) and Its Analogues: A Computational Approach

Cecropin A–Magainin 2 (CA–MA) hybrid antimicrobial peptide (AMP), a combination of two naturally occurring AMPs, cecropin A and magainin 2 is preferred widely in biotechnological, nano and pharmaceutical applications. It exhibits a strong antibacterial activity with a characteristic reduced cytotoxic effect towards mammalian cells. In this study, three AMP structures native CA–MA hybrid and its tryptophan substitutes CA–MA L2 and CA–MA A2 was computationally studied to analyze their structural stability and functionality. Computational analysis like, intra-molecular interactions (25), relative stability (3.22) and instability index (?14.28) showed an increase in structural stability of native CA–MA hybrid. Additionally, the generated peptide ensembles showed a RMSD (3.98 Å), RMSF (0.202 Å), radius of gyration (11.98 Å), ovality (3.33) and hydrophobicity (69.7%) supporting native CA–MA along with hydrogen bond strength (?4.212 kcal/mol) and distribution comparatively. The distribution of secondary structure in native CA–MA hybrid showed the sequential maintenance of stable helical content along with helical stability (52.25%) and computed free energy (?1.74 kcal/mol) in membrane mimicking environment proving its functional activity comparatively. This study aids in designing stable AMP biodrugs with low cytotoxicity in future, the result can be potentially extended to other AMPs to assist in their exploitation as peptide and nano drugs.     

1H NMR study of the kinetics of substituted aniline polymerization. II. Copolymerization of 2‐methoxyaniline and 3‐aminobenzenesulfonic acid

We investigated the kinetics of the oxidative chemical copolymerization of 2‐methoxyaniline (OMA) and 3‐aminobenzenesulfonic acid (MA) by monitoring monomer depletion with ¹H NMR spectroscopy. We adapted a semiempirical kinetic model, previously used for OMA homopolymerization, for the consumption of both OMA and MA monomers with a large difference in their reactivities. The OMA polymerization rate and end conversion showed a similar dependence on the reaction conditions, as described in the first part of this series, for its homopolymerization. Generally, the MA comonomer had an inhibition effect on the OMA polymerization rate. However, an increase in the initial MA concentration resulted in an increased OMA initiation rate. Because of the higher reactivity of OMA compared with that of MA, the OMA conversion began before the MA conversion, and both the initiation and propagation rates were higher than those for MA. The molar ratios of the converted monomers (MA/OMA) were always significantly lower than the corresponding MA/OMA feed fractions. They depended on the reaction conditions used for the copolymerization. In particular, higher oxidant or MA concentrations, higher temperatures, and a 1 M DCl concentration favored MA conversion, that is, its insertion into the copolymer. The MA end conversion was much smaller than that of OMA, only up to 23%; for a low oxidant concentration (oxidant/monomer‐deficient molar ratio), it was only 6%. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2482–2493, 2001     

Thermo‐ and pH‐responsive gradient and block copolymers based on 2‐(2‐methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces

A series of gradient and block copolymers, based on 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and tert‐butyl acrylate (^tBA), were synthesized by atom transfer radical polymerization (ATRP) in a first step. The MEO₂MA monomer leads to the production of thermosensitive polymers, exhibiting lower critical solution temperature (LCST) at around room temperature, which could be adjusted by changing the proportion of ^tBA in the copolymer. In a second step, the tert‐butyl groups of ^tBA were hydrolyzed with trifluoroacetic acid to form the corresponding block and gradient copolymers of MEO₂MA and acrylic acid (AA), which exhibited both temperature and pH‐responsive behavior. These copolymers showed LCST values strongly dependent on the pH. At acid pH, a slightly decrease of LCST with an increase of AA in the copolymer was observed. However, at neutral or basic conditions, ionization of acid groups increases the hydrophilic balance considerably raising the LCST values, which even become not observable over the temperature range under study. In the last step, these carboxylic functionalized copolymers were covalently bound to biocompatible and biodegradable films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(HB‐co‐HHx)] obtained by casting and, previously treated with ethylenediamine (ED) to render their surfaces with amino groups. Thereby, thermosensitive surfaces of modified P(HB‐co‐HHx) could be obtained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

聚甲基丙烯酸甲酯-聚甲基丙烯酸两亲性嵌段共聚物的制备及自组装形态的研究

以2-溴异丁酸乙酯为引发剂, 氯化亚铜/联二吡啶为催化剂, 通过原子转移自由基聚合(ATRP)获得分子链末端含一个α-溴原子的聚甲基丙烯酸甲酯(PMMA-Br), 以此为大分子引发剂引发甲基丙烯酸铅[Pb(MA)₂]单体进行ATRP反应, 制得P[MMA-b-Pb(MA)_2]嵌段共聚物, 将此共聚物在盐酸中进行离子交换即得聚甲基丙烯酸甲酯-聚甲基丙烯酸的两亲性嵌段共聚物[P(MMA-b-MAA)]. 用FTIR, GPC, NMR和SEM方法对共聚物进行了表征.     

Copolymers of 2-hydroxyethyl methacrylate and alkyl acrylates: Studies of molecular weight distribution and thermal behavior

Several copolymers of 2-hydroxyethyl methacrylate (HEMA) with methyl acrylate (MA), ethyl acrylate (EA), n-butyl acrylate (BA), and methyl methacrylate (MMA) were prepared at 70°C in nitrogen atmosphere using 0.2% (w/v) benzoyl peroxide as initiator. The copolymer composition was evaluated by estimation of hydroxyl group in the copolymers. Intrinsic viscosity of HEMA–EA, HEMA–BA, and HEMA–MMA copolymers was determined at 35°C in dimethyl formamide. Molecular weight distribution of copolymer samples was evaluated by gel permeation chromatography. Thermal behavior of the copolymers was investigated by dynamic thermogravimetry. Thermal stability decreased on increasing HEMA content in MA, EA, and BA copolymers. However, a reverse trend was observed in HEMA–MMA copolymers.     

Synthesis and free radical polymerization of 2-methylene-7-oxabicyclo[2.2.1]heptane

A new monomer, 2-methylene-7-oxabicyclo[2.2.1]heptane ( IV ) was synthesized via four steps. Its structure was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra as well as elementary analysis. Free radical polymerization and copolymerization of IV were investigated. No homopolymer was obtained due to the effect of allyl inhibition. When IV copolymerized with electron-donor monomers, such as vinyl acetate and stvrene, IV acted as inhibitor for the polymerization of vinyl acetate, but could not inhibit the polymerization of styrene. However, the copolymers of IV with electron-accepting monomers, such as methyl methacrylate, acrylonitrile, or maleic anhydride (MA) were obtained. The contents of IV in the copolymers increased as e values of electron-accepting monomers increased. Strictly alternating copolymer was obtained only in the case of MA and IV . The thermal properties of copolymers were investigated. © 1995 John Wiley & Sons, Inc.