Synthesis and crystal structures of Ag and Hg complexes of bis(N-heterocyclic carbenes) on p-tert-butylcalix[4]arene platform

A series of p-tert-butylcalix[4]arene 1,3-diimidazolium salts were successfully prepared by the alkylation of p-tert-butylcalix[4]arene with dibromoalkanes, and sequential substitution reaction with 1-alkylimidazole. Furthermore, coordination reactions of p-tert-butylcalix[4]arene 1,3-diimidazolium salts with silver oxide and mercury acetate gave novel Ag and Hg complexes of bis(N-heterocyclic carbenes) on p-tert-butylcalix[4]arene platform. The single-crystal structures of four p-tert-butylcalix[4]arene 1,3-diimidazolium salts and three metal complexes were successfully determined by X-ray diffraction. An Ag–Ag argentophilic interaction (Ag–Ag bond length is 3.1599(6) Å) is formed between the two Ag–NHC complexes and a dimetallic coordination mode exists in Hg–NHC complexes.     

Solvent extraction of europium trifluoromethanesulfonate into nitrobenzene in the presence of p-tert-butylcalix[6]arene and p-tert-butylcalix[8]arene

From extraction experiments and ??-activity measurements, the extraction constants corresponding to the general equilibrium Eu³⁺(aq) + 3A^?(aq) + L(nb) ? EuL³⁺(nb) + 3A^?(nb) taking part in the two-phase water?Cnitrobenzene system (A^? = CF₃SO₃ ^?; L = p-tert-butylcalix[6]arene, p-tert-butylcalix[8]arene; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Further, the stability constants of the EuL³⁺ complexes in nitrobenzene saturated with water were calculated for a temperature of 25 °C as log ?? _nb(EuL³⁺) = 6.4 ± 0.1 (L = p-tert-butylcalix[6]arene) and log ?? _nb(EuL³⁺) = 11.3 ± 0.1 (L = p-tert-butylcalix[8]arene).     

Extraction of Cesium-137 and Americium-241 by Calix[n]arenes from Carbonate-Alkaline Media

Trends of cesium-137 and americium-241 extraction from carbonate–alkaline media with p-tert-butylcalix[n]arenes with macrocycles of different size (n = 4, 6, 8), including monofunctional derivatives with lipophilic substituents for increasing their solubility in organic media, were studied. It was demonstrated that O-n-octyl ethers of p-tert-butylcalix[6]arene appeared to be the most efficient extractants for Cs(I) cations, while it was p-tert-butylthiacalix[4]arene for and americium(III) cations.     

p-tert-Butylcalix[8]arene catalysed synthesis of 3,5-dinitrothiophene scaffolds: antiproliferative effect of some representative compounds on selective anticancer cell lines

A new efficient protocol for the synthesis of 3,5-dinitrothiophene scaffolds was developed by using simple p-tert-butylcalix[8]arene in aqueous medium. Biological activities of some representative compounds were also studied to inhibit the cell growth on selective anticancer cell lines.     

(1+1) or (2+2) Coupling for bis(tosyloxyethoxy)benzenes with calix[4]arene and thiacalix[4]arene

As bifunctional reagents, bis(tosyloxyethoxy)benzenes can react with p-tert-butylcalix[4]arene or p-tert-butylthiacalix[4]arene to afford intramolecularly bridged (1+1) or intermolecularly bridged (2+2) products. It was found that the bridging pattern strongly depended on the structure of bis(tosyloxyethoxy)benzene and the kind of calixarene. For the ortho-isomer of bis(tosyloxyethoxy)benzene, intramolecularly bridged calix[4]arene and thiacalix[4]arene were the main products. For the para-isomer, the bridging reaction was in a (2+2) fashion. As for the meta-isomer, double thiacalix[4]arene and intramolecularly bridged calix[4]crown were synthesized.     

FT-IR and FT-Raman study of hydrogen bonding in p-alkylcalix[8]arenes

The FTIR and FT Raman spectra of p-alkylcalix[8]arenes (alkyl = tert-butyl, isononyl) were recorded. Analysis of IR spectra showed that the cyclic cooperative intramolecular hydrogen bond is realized in calix[8]arene. It was found that the strength of the cyclic cooperative intramolecular hydrogen bond in the series of alkyl derivatives of calix[8]arenes depends very little on the replacement of the p-tert-butyl groups by the more bulky isononyl group. From our data follows that the orientation of aromatic fragments in calixarene molecules depends on the type of alkyl substituent.An analysis of the changes in the IR spectra with heating and dissolution shows that the conformation of the “pleated-loop” is retained in p-tert-butylcalix[8]arene. It turned out that the intramolecular hydrogen bond is a “probe” of the conformation of calixarene molecules and IR spectroscopy is a unique method that allows one to follow the slightest nuances of changes in the H-bound system of these supermolecules.     

Syntheses of two diamine substituted 1,3-distal calix[4]arene-based magnetite nanoparticles for extraction of dichromate, arsenate and uranyl ions

The synthesis of two new calixarene derivatives 4 and 5, functionalized at the lower rim with 4-amino-1-benzylpiperidine to give diamide and diamine derivatives of p-tert-butylcalix[4]arene, is described. They were obtained by the reaction of both the diester derivative of p-tert-butylcalix[4]arene (2) and the dialkyl bromide derivative of p-tert-butylcalix[4]arene (3) with 4-amino-1-benzylpiperidine. The ¹H NMR spectra of calixarene derivatives show that 4 and 5 exist in the cone conformation. Moreover, these diamide and diamine derivatives of p-tert-butylcalix[4]arene (4 and 5) have been immobilized onto [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane-modified Fe₃O₄ magnetite nanoparticles to obtain calixarene-based magnetic nanoparticles M-DADBP-Calix (6) and M-DABP-Calix (7). The calix[4]arene immobilized materials were characterized by a combination of Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Thermogravimetric Analyses (TGA) and elemental analysis. Additionally, the studies regarding the removal of As(V)/Cr(VI) ions as well as U(VI) ion from aqueous solutions were also carried out by using these compounds in liquid-liquid/solid-liquid extraction experiments.     

Synthesis and Complexation properties of N,N’-bis(calix[4]Arenoxyacetyl)Hydrazine Derivative

Heating of p-tert-butylcalix[4]arene bearing acethydrazide moiety at the lower rim in MeCN or PrⁱOH (EtOH) affords the corresponding N,N’-bis(calix[4]arenoxyacetyl)hydrazine derivative. The hydrazinolysis of mono(methoxycarbonylmethoxy)-p-tert-butylcalix[4]-arene in benzene or refluxing biscalixarene hydrazide in benzene in the presence of hydrazine hydrate produces the mixture of 1,2- and 1,3-(N,N’-diacetylhydrazine)-p-tert-butylcalix[4]arenes.     

Selective O-alkylations with glycol chlorohydrins via the Mitsunobu reaction. A versatile route to calix[4]- and 1,1′-binaphthocrowns

Selective monoalkylation of p-tert-butylcalix[4]arene and BINOL with oligoethylene glycol chlorohydrins was achieved under the Mitsunobu protocol using DEAD/TPP. The method provides a simple access to ether precursors capable of cyclising to various crowns.     

Synthesis and Conformational Characteristics of Benzyl-Substituted p-tert-Butylcalixarenes

(m-Methylbenzyloxy)-, bis(p-methylbenzyloxy)-, and bis(m-methylbenzyloxy)-p-tert-butylcalix[4]arenes were prepared by reactions of p-tert-butylcalix[4]arene with p- and m-methylbenzyl bromides in the presence of alkali metal carbonates. Silylation of these derivatives gave (m-methylbenzyloxy)bis(trimethylsilyloxy)-, bis(m-methylbenzyloxy)bis(trimethylsilyloxy)-, and bis(p-methylbenzyloxy)bis(trimethylsilyloxy)-p-tert-butylcalix[4]arenes. With phase-transfer catalysis, bis(p-methylbenzyloxy)bis(2-propenyloxy)- and bis(m-methylbenzyloxy)bis(2-propenyloxy)-p-tert-butylcalix[4]arenes were obtained. Alkylation of the monosubstituted calixarene yields the corresponding trisubstituted derivative.     

Enantiodiscrimination by inclusion phenomena inside a bis(ethyl lactate) p-tert-butylcalix[4]arene derivative

An ethyl lactate derivative of p-tert-butylcalix[4]arene is able to differentiate the NMR spectra of 3,5-dinitrobenzoyl derivatives of amino acids methyl esters. The origin of enantiodiscrimination in solution was investigated by NMR spectroscopy and comparison with model chiral auxiliaries.     

Direct access to upper rim substituted mono- and diaryloxy calix[4]arenes via bis(spirodienone) route

A seemingly ipso-like nucleophilic substitution of the upper rim of p-tert-butylcalix[4]arene is accomplished by an indirect method involving calix[4]arene derived bis(spirodienone). This method not only provides both mono and 1,3-diaryloxy calixarenes but also enables the synthesis of upper rim monothio substituted calix[4]arenes. A modification of the methodology can be successfully extended for the selective synthesis of mono- and 1,3-diquinone calix[4]arenes having free hydroxyl groups at the lower rim, in fewer steps.     

Determination of cefuroxime axetil in tablets and biological fluids using liquid chromatography and flow injection analysis

In the present work, the separations of calixarene derivatives have been investigated using both high-performance liquid chromatography (HPLC) and nonaqueous capillary electrophoresis (NACE) techniques. HPLC-1 method with LC-318 (pore size = 300 Å) column and MeCN mobile phase was optimized for the separation of calixarenes. At the flow-rate of 1 ml/min p-nitrocalix[6]arene, calix[4]arene and calix[6]arene could be well baseline and symmetrically separated within 5 min. For the separation of p-tert-butylcalix[n]arenes (n = 4, 6, 8), HPLC-2 and NACE methods have been optimized. The optimal conditions in HPLC-2 method included NH₂ column and MeCN mobile phase, and p-tert-butylcalix[n]arenes (n = 4, 6, 8) were baseline separated within 10 min at 0.8 min/min. The optimal conditions for NACE method employed MeCN-H₂O (8:2, v/v) as the nonaqueous medium and 120 mM Tris/HCl (pH 9.0) as the buffer, and p-tert-butylcalix[n]arenes (n = 4, 6, 8) were successfully baseline resolved within 16 min. With the detection at 280 nm, the calibration lines were linear in the ranges of 1-200 μg/ml for calixarene derivatives by HPLC-1 and HPLC-2 methods, and of 2.5-200 μg/ml for p-tert-butylcalix[n]arenes (n = 4, 6, 8) by NACE method, respectively. The detection limits (S/N = 3) and recoveries ranged from 0.5 to 1.4 μg/ml and from 98.1 to 102.4% by both HPLC-1 and HPLC-2 methods, and from 1.3 to 2.0 μg/ml and from 97.9 to 105.1% by NACE method, respectively. The intra-day reproducibility of the methods was determined with satisfactory results. The proposed HPLC and NACE methods were accurate and reproducible, and could be utilized to separate and determine calixarene derivatives.     

Polymorphism of 4-<Emphasis Type="Italic">tert</Emphasis>-butylcalix[4]arene upon the formation and thermal destruction of its complex with acetonitrile

It is demonstrated that combined analysis of powder X-ray diagrams and differential scanning calorimetry allows us to reveal complex polymorphic transformations of 4-tert-butylcalix[4]arene upon the formation and thermal destruction of its complex with acetonitrile. The stability of 4-tert-butylcalix[4]arene polymorph containing no solvent molecules in the crystal lattice after the removal of acetonitrile is assumed.     

Synthesis and Crystal Structure of p-tert-Butylthiacalix[8]arene: A New Member of Thiacalixarenes

Even though it was obtained in poor yield, p-tert-butylthiacalix[8]arene (TC8A) has been synthesized as a new member of thiacalix[n]arenes by the terephthalate-induced cyclization of a mixture of acyclic oligomers, which was obtained by the reaction between p-tert-butylphenol and sulfur with CaO in ethylene glycol/diphenyl ether system. Slow evaporation of the chloroform solution of TC8A afforded guest-free crystals consisting of TC8A itself. The close-packed crystal structure of TC8A resembles that of p-tert-butylcalix[8]arene (C8A) closely, containing a plated loop molecular structure.This revised version was published online in July 2005 with a corrected issue number.     

4-tert-butylcalix[4]arene-based porous structures

Microporous material with a large surface area is obtained through the controlled desolvation of 4-tert-butylcalix[4]arene complex with acetonitrile.     

Synthesis, characterization, and conformational analysis of new perfunctionalized calix[9]arenes

The synthesis of a series of six new per-substituted p-tert-butylcalix[9]arenes derivatives has been achieved. Functions such as ester, nitrile, or carbonate have been grafted on the phenolic oxygens of calix[9]arene: p-tert-butylcalix[9]arene nona-ethyl acetate, p-tert-butylcalix[9]arene nona-carboxylic acid, p-tert-butylcalix[9]arene nona-cyanopropyloxy, p-tert-butylcalix[9]arene nona-tert-butoxycarbonyle, p-tert-butylcalix[9]arene nona-acetyl, and p-tert-butylcalix[9]arene nona-trifluoroacetyl have been obtained in good yields (from 48% to 78%) and fully characterized. The X-ray structures of p-tert-butylcalix[9]arene nona-tert-butoxycarbonyl and p-tert-butylcalix[9]arene nona-ethyl acetate have been determined. A dynamic NMR study has revealed the high conformational mobility of such structures, even at low temperature.     

Synthesis and chiral recognition abilities of new calix[6]arenes bearing amino alcohol moieties

Herein the synthesis and recognition abilities towards amino acids and amino alcohols of new d-/l-phenylalaninol substituted p-tert-butylcalix[6]arenas are reported. These compounds, 6 and 7 have been synthesized via nucleophilic substitution reactions involving 5,11,17,23,29,35-tert-butyl-37,38-dimethoxy-39,40,41,42-(p-tosylethoxy)calix[6]arene 5 with d-/l-phenylalaninol in dry THF. The extraction properties of 6 and 7 towards some selected amino acid methylesters and amino alcohols have been studied by liquid–liquid extraction. These results show that chiral calix[6]arene derivatives exhibit a good affinity towards all amino acids and amino alcohols.     

Synthesis and complexing properties of 1,5:3,7-doubly bridged calix[8]arenes with mixed spanning elements

Two different bridges were introduced at the 1,5:3,7-positions of p-tert-butylcalix[8]arene 1 using a two-step alkylation procedure. A probable cation template effect in the introduction of the second bridge was evidenced. The obtained bis-bridged derivatives 3 possess encapsulating properties toward alkali cations modulated by the length and nature of the bridges.     

Extraction and DFT study on the complexation of H3O+ ion with tetrakis(2-ethoxyethoxy)-tetra-p-tert-butylcalix[4]arene

Abstract  

Extraction experiments in the two-phase water/nitrobenzene system and γ-activity measurements were used to determine the stability constant of protonated tetrakis(2-ethoxyethoxy)-tetra-p-tert-butylcalix[4]arene in nitrobenzene saturated with water. Density functional theory (DFT) calculations were applied to derive the most probable structure of the tetrakis(2-ethoxyethoxy)-tetra-p-tert-butylcalix[4]arene·H₃O⁺ complex species.