Reaction of halogenated hydrocarbon solvents with tertiary amines: Spectrophotometric and conductimetric study

Halogenated hydrocarbon solvents, SolvCl, (dichloromethane, chloroform, and 1,2‐dichloroethane) react with various types of tertiary amines, A, such as tri‐n‐buthylamine, tropane derivatives (tropine and atropine) and quinine generating a quaternary ammonium salt, N‐halogenalkylammonium chloride (SolvA⁺Cl^?). Some tertiary amines, as well as secondary and primary amines, cannot react with these solvents. This reaction has been detected and studied by both conductivity and visible spectrophotometry measures—the latter after adding a small quantity of a dye, such as bromocresol green (BCGH₂), bromophenol blue (BPBH₂), or tetrabromophenolphthaleinethyl ester (TBPEH). Both study methods permit the determination of the kinetic parameters, and they are in good agreement. The monoprotic TBPEH is the dye of the simplest mechanism, useful to study kinetics of amines of uncertain behavior as quinine, while BPBH₂ is the best dye for quantitative determinations. Kinetics for this reaction are of first order for both amine, A, and solvent, SolvCl; activation energy, E_a, and frequency factor are also determined. Rate constants increase with the amine basicity and with a reduction in the number of the halogen atoms present in the solvent. This reaction is slow but not negligible and must be considered a side reaction of these universally used solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36:500–509, 2004     

Sensitive fluorescent detection and Lewis basicity of aliphatic amines

In this contribution is reported the sensitive properties of the Zn(II) Schiff base complex, 1, in dichloromethane with respect a series of primary, secondary, and tertiary aliphatic amines through the study of fluorescence enhancement upon amine coordination to the Lewis acidic Zn(II) metal center with formation of 1:1 adducts. It is found that complex 1 exhibits selectivity and nanomolar sensitivity for primary and alicyclic amines. A distinct selectivity is also observed along the series of secondary or tertiary amines, paralleling the increasing steric hindrance at the nitrogen atom. The binding interaction can be related to the Lewis basicity of the coordinating amine; thus, complex 1 represents a suitable reference Lewis acid, and estimated binding constants within the investigated amine series can be related to their relative Lewis basicity. A relative order of the Lewis basicity can be established for acyclic amines, primary > secondary > tertiary, while an inverted order, tertiary > secondary ≈ primary (acyclic), is found in the case of alicyclic amines. The present approach represents a simple, suitable method to ranking the relative Lewis basicity of aliphatic amines in low-polarity, nonprotogenic solvents.     

One-pot synthesis of secondary or tertiary amines from alcohols and amines via alkoxyphosphonium salts

Secondary or tertiary amines may be prepared from primary alcohols and primary or secondary amines by treating triphenylphosphine with N-bromosuccinimide (NBS) in the presence of the alcohol at low temperature, followed by addition of the amine and heating for about 1 h. The yield of amine is good to fair, decreasing sharply with sterically congested alcohols and starting amines.     

Spectrophotometric studies on the thermodynamic properties of charge-transfer complexes between m-DNB (1,3-dinitrobenzene) with aliphatic amines in DMSO and determination of the vertical electron affinity of m-DNB

1,3-Dinitrobenzene formed colored 1:1 complexes with aliphatic amines (chromogenic agents) like isopropylamine,ethylenediamine, tetraethylenepentamine and bis(3-aminopropyl)amine in DMSO having absorption maxima at 563 nm, 584 nm, 580.5 nm and 555 nm respectively. The complexes were stable for more than 24 h. The accurate association constants KAD and other thermodynamic parameters were determined with D and A usually in stoichiometric ratios. But in case of m-DNB and bis(3-aminopropyl)amine, the association constants KAD and the thermodynamic parameters were also determined using Benesi-Hildebrand equation to show the variations of KAD under different conditions. ΔG° values were found to be negative in all cases resulting from exothermic enthalpy changes and favourable entropy changes. The energies of transition for the CT complexes hνCT found experimentally were considerably different from the energies of transition (from HOMO of donor to LUMO of acceptor) calculated using AM1 but the differences were considerably reduced using DFT calculations. The vertical electron affinity of m-DNB was calculated using the method suggested by Mulliken. However, no FTIR measurements of the complexes could be made due to experimental limitations.     

Distribution of amines in water/AOT/n-hexane reverse micelles: influence of the amine chemical structure

The distribution of different aliphatic and aromatic amines: n-butylamine (n-BA), isobutylamine (i-BA), tert-butylamine (t-BA), piperidine (PIP), N,N-dimethylaniline (DMA) and N-methylaniline (MA) in water/sodium 1,4-bis(2-ethylhexyl)sulfosuccinate(AOT)/n-hexane reverse micelles was investigated by steady-state fluorescence measurements. The partition constants were measured by an indirect method based on the effect that amine partitioning exert on the bimolecular rate of the reaction between a microphase incorporated fluorophore (Ru(bpy)2+(3)) and the quencher, (Fe(CN)3-(6)). For MA, that can act as a quencher of the fluorophore a direct method was used. The results show that primary amines have larger partition constants than the secondary ones. For tertiary amines the distribution constants were practically negligible. Laser flash photolysis experiments confirmed that tertiary amines, both aliphatic and aromatic, are not incorporated to the micellar pseudophase. The effect of the amine structure on the partition constant was analyzed through linear solvation free energy relationships (LSER) using solute parameters and compared with those obtained for alcohols. Hydrogen bond interactions with the AOT polar heads appear to be the main driving force for the distribution of amines between the organic and micellar pseudophases, whereas the size of the alkyl or aromatic group tends to hinder it.     

Effect of amine nature on reaction mechanism: aminolyses of o-4-nitrophenyl thionobenzoate with primary and secondary amines

Pseudo-first-order rate constants (k(obs)) have been measured spectrophotometrically for reactions of O-4-nitrophenyl thionobenzoate (2) with a series of primary and acyclic secondary amines. The plots of k(obs) vs amine concentration are linear for the reaction of 2 with primary amines. The slope of the Br?nsted-type plot for the reaction of 2 with primary amines decreases from 0.77 to 0.17 as the amine basicity increases, indicating that the reaction proceeds through a zwitterionic addition intermediate in which the rate-determining step changes from the breakdown of the intermediate to the reaction products to the formation of the intermediate as the amine basicity increases. On the other hand, for reactions with all the acyclic secondary amines studied, the plot of k(obs) vs amine concentration exhibits an upward curvature, suggesting that the reaction proceeds through two intermediates, e.g., a zwitterionic addition intermediate and an anionic intermediate. The microscopic rate constants (k(1), k(-)(1), k(2), and k(3) where available) have been determined for the reactions of 2 with all the primary and secondary amines studied. The k(1) value is larger for the reaction with the primary amine than for the reaction with the isobasic acyclic secondary amines, while the k(-)(1) value is much larger for the latter reaction than for the former reaction. The k(3) value for the reaction with secondary amine is independent of the amine basicity. The small k(2)/k(-)(1) ratio is proposed to be responsible for the deprotonation process observed in aminolyses of carbonyl or thiocarbonyl derivatives.     

Reagents regeneration flow injection analysis (RRFIA) for spectrophotometric determination of methamphetamine coupled with solvent extraction

Methamphetamine (MPA), being a stimulant drug, reacts with tetrabromophenolphthalein ethyl ester (TBPEH) to form a red-violet ion associate, TBPEHMPA, in 1,2-dichloroethane (DCE) at pH 9. The maximum absorption wavelength was at 570 nm. After measuring, yellow TBPEH with DCE could be regenerated by mixing with the buffer solution at pH 3. The regenerated TBPEH/DCE could be reused as an ion association reagent and extracting solvent. In addition, the reagent regeneration could be performed by the on-line flow injection system and the cyclic flow injection analysis system was demonstrated for the determination of MPA without consumption of ion association reagent and organic solvent. The calibration curve was linear in the range of 0.5-3.5 × 10⁻⁵ M with good repeatability. The sample throughput was 20 h⁻¹.     

Hydrogen bonding by alcohols and amines

The pure base calorimetric method has been used to determine the enthalpies of hydrogen bond complex formation between aliphatic amines and alcohols. The enthalpies of complexation for the series methanol-n-butanol bonding with triethylamine increase with decreasing alkyl chain length in accordance with the electron donating properties of alkyl groups. Unexpectedly, the enthalpies for the complexes of n-butanol with tributylamine, tripropylamine, and triethylamine increase with decreasing alkyl chain length.Primary and secondary amines form hydrogen bonded complexes with n-butanol in which the amine protons form an NH···O bond with the alcohol and the alcohol hydroxyl proton donates a proton to the amine nitrogen. The difference in enthalpy of complex formation between tertiary amines and secondary amines is largely accounted for by the involvement of the amine proton of the secondary amine. Primary amines, like secondary amines, donate only one proton to the complex with n-butanol but have a larger complex enthalpy than secondary amines probably because of steric hindrance and differences in basicity.     

Spectrophotometric determination of aliphatic primary and secondary amines by reaction with p-benzoquinone

A simple, sensitive and selective spectrophotometric method has been developed for determination of aliphatic primary and secondary amines. It is based on a reaction with excess of p-benzoquinone in ethanol whereby 1:1 (amine:quinone) coloured products are obtained, which have maximum absorption at 510 nm and E(1cm)(1%) in the range 400-650. The effect of solvent, temperature, concentration of quinone and the presence of water have been kinetically investigated by the initial rate method. The conditions for monitoring amine concentrations as low as 0.1 microg/ml are optimized in the light of the kinetic data. Results with an average recovery of 98.5% and mean standard deviation of 1.9% are obtained with 9 different amines without interference from tertiary amines, ammonia, amides, imides, anilides, hydrazines and alpha-amino-acids.     

The complexes of tetramethylresorc[4]arene with amines. Effect of the amine concentration on the complex composition

The complexation of tetramethylresorc[4]arene with primary and secondary amines in acetonitrile was investigated spectrophotometrically. The stoichiometry of the complexes formed was shown to depend on the amine concentration. Based on the proposed complexation models, the formation constants of the complexes as well as their thermodynamical parameters were determined and discussed. Depending on the amine concentration, two types of solid complexes of tetramethylresorc[4]arene with amines were obtained. The composition of these complexes was confirmed by ¹H NMR.     

Enthalpies of formation of primary, secondary, and tertiary amineborane adducts in tetrahydrofuran solution

The enthalpies of solution of primary, secondary, and tertiary amines in THF were determined from calorimetric experiments for five primary, five secondary, and three tertiary amines. The enthalpies of formation of amineborane adducts from borane and the corresponding amines in THF solution were also determined. The differences in adduct formation enthalpies from borane and the corresponding amines can be explained by taking into account steric effects and the chain length of the substituents on the amine. In general, as the alkyl chain length, branching, or the number of chains increases, the formation enthalpy of amineborane adducts is less exothermic. That is to say, the steric effect is more important in tertiary and secondary amines than in primary ones. The enthalpy of solution of linear primary amines in THF was more endothermic as the alkyl chain increased and a similar behavior was observed with linear secondary and tertiary ones. An analysis is made of the amine structural factors which affect the amineborane adduct formation.     

Kinetics and mechanism of osmium (VIII) and ruthenium(III) catalyzed oxidation of aliphatic amines by chloramine-T in alkaline and perchloric acid media

The kinetics of oxidation of aliphatic amines viz., ethylamine, n-butylamine, isopropylamine (primary amines), diethylamine (secondary amine), and triethylamine (tertiary amine) by chloramine-T have been studied in NaOH medium catalyzed by osmium (VIII) and in perchloric acid medium with ruthenium(III) as catalyst. The order of reaction in [Chloramine-T] is always found to be unity. A zero order dependence of rate with respect to each [OH^?] and [Amine] has been observed during the osmium(VIII) catalyzed oxidation of diethylamine and triethylamine while a retarding effect of [OH^?] or [Amine] on the rate of oxidation is observed in case of osmium(VIII) catalyzed oxidation of primary aliphatic amines. The ruthenium(III) catalyzed oxidation of amines follow almost similar kinetics. The order of reactions in [Amine] or [Acid] decreases from unity at higher amine or acid concentrations. The rate of oxidation is proportional to {k′ and k″ [Ruthenium(III)] or [Osmium(VIII)]} where k′ and k″ (having different values in case of ruthenium(III) and osmium(VIII)) are the rate constants for uncatalyzed and catalyzed path respectively. The suitable mechanism consisting with the kinetic data is proposed in each case and discussed.     

Iron(III) corroles and porphyrins as superior catalysts for the reactions of diazoacetates with nitrogen- or sulfur-containing nucleophilic substrates: synthetic uses and mechanistic insights

A thorough mechanistic investigation has been performed on the reactions of primary and secondary amines with diazoacetates, which proceed uniquely quickly and efficiently when catalyzed by iron(III) corroles and porphyrins. Two major differences in relation to other metal-based catalysts are that the iron complexes are not poisoned by excess amine and that metal-carbene intermediates are apparently not involved in the reaction pathway. The results instead point towards nitrogen ylide intermediates formed by nucleophilic attack of the amines on diazoacetate-coordinated iron complexes. Nitrogen ylides are also formed when allyl- and propargyl-substituted tertiary amines react with diazoacetates, a scenario that smoothly leads to 2,3-rearrangement reaction products with catalytic amounts of the iron(III) complexes. Similar findings regarding the superiority of the iron(III) complexes (in terms of catalyst loading, chemical yields, and reaction conditions) were obtained with thiols (S--H insertion) and sulfides (2,3-rearrangement reactions), which suggest similar mechanisms operate in these cases.     

Absorption spectroscopic and FTIR studies on EDA complexes between TNT (2,4,6-trinitrotoluene) with amines in DMSO and determination of the vertical electron affinity of TNT

TNT (2,4,6-trinitrotoluene) formed deep red 1:1 CT complexes with chromogenic agents like isopropylamine, ethylenediamine, bis(3-aminopropyl)amine and tetraethylenepentamine in DMSO. The complexes were also observed in solvents like methanol, acetone, etc. when the amines were present in large excess. The isopropylamine, complex showed three absorption peaks (at 378, 532 and 629 nm) whereas higher amines showed four peaks (at 370, 463, 532 and 629 nm). The peak at 463 nm vanished rapidly. The peak of the complexes near 530 nm required about 8-10 min to develop and the complexes were stable for about an hour but the peak slowly shifted towards 500 nm and the complexes were found to be stable for more than 24 h. The evidence of complex formation was obtained from distinct spots in HPTLC plates and from the shifts in frequencies and formation of new peaks in FTIR spectra. The peaks near 460 nm (transient) and 530 nm may be due to Janovsky reaction but could not be established. The extinction coefficients of the complexes were determined directly which enabled the accurate determination of the association constants KDA with TNT and amines in stoichiometric ratios. The results were verified using iterative method. The quantification of TNT was made using epsilon value of the complex with ethylenediamine. The vertical electron affinity (EA) of TNT was calculated using the method suggested by Mulliken.     

Application of Crown Ether to Chemical Analysis. III. Extraction of Amines with Crown Ether

Abstract

The protonated amines were extracted with crown ether as the picrate into organic solvent. The overall extraction constants(Kex) for the 1 : 1 : 1 complexes, AHLP, of 18-crown-6 with protonated amines and picrate between 1,2-dichloroethane and water have been determined at 25°C. The extractability of complexes decreased in the sequence: primary amines > secondary amines, which indicated that the type of amine was a most important factor. The log Kex values were determined to be 6.6, 7.6, 7.9, 8.3, 9.6, 2.5 and 3.8 for tert-butylamine, ethylamine, n-butylamine, sec-butylamine, n-hexylamine, diethylamine and di-n-propylamine respectively.     

Covalently Immobilizable Tris(Pyridino)-Crown Ether for Separation of Amines Based on Their Degree of Substitution

A great number of biologically active compounds contain at least one amine function. Appropriate selectivity can only be accomplished in a few cases upon the substitution of these groups, thus functionalization of amines generally results in a mixture of them. The separation of these derivatives with very similar characteristics can only be performed on a preparative scale or by applying pre-optimized HPLC methods. A tris(pyridino)-crown ether was designed and synthetized for overcoming these limitations at a molecular level. It is demonstrated, that this selector molecule is able to distinguish protonated primary, secondary and tertiary amines by the formation of reversible complexes with different stabilities. This degree of substitution-specific molecular recognition of amines opens the door to develop separation processes primarily focusing on the purification of biologically active compounds in a nanomolar scale.     

CO2 deactivation of supported amines: does the nature of amine matter?

Adsorption of CO(2) was investigated on a series of primary, secondary, and tertiary monoamine-grafted pore-expanded mesoporous MCM-41 silicas, referred to as pMONO, sMONO, and tMONO, respectively. The pMONO adsorbent showed the highest CO(2) adsorption capacity, followed by sMONO, whereas tMONO exhibited hardly any CO(2) uptake. As for the stability in the presence of dry CO(2), we showed in a previous contribution [J. Am. Chem. Soc.2010, 132, 6312-6314] that amine-supported materials deactivate in the presence of dry CO(2) via the formation of urea linkages. Here, we showed that only primary amines suffered extensive loss in CO(2) uptake, whereas secondary and tertiary amines were stable even at temperature as high as 200 °C. The difference in the stability of primary vs secondary and tertiary amines was associated with the occurrence of isocyanate as intermediate species toward the formation of urea groups, since only primary amines can be precursors to isocyanate in the presence of CO(2). However, using a grafted propyldiethylenetriamine containing both primary and secondary amines, we demonstrated that while primary amines gave rise to isocyanate, the latter can react with either primary or secondary amines to generate di- and trisubstituted ureas, leading to deactivation of secondary amines as well.     

Trans ligand influence in cobalt(III) Schiff base complexes: Electronic and steric effects on the kinetics of hydrolysis

Rate constants for the hydrolysis (k_h) of six different amines in trans‐[Co((BA)₂en)(amine)₂]ClO₄ complexes (amine = aniline 1a , para‐toluidine 1b , benzylamine 1c (primary amines), pyrrolidine 2a , piperidine 2b , morpholine 2c (secondary amines), and (BA)₂en = Bisbenzoylacetoneethylenediiminato) in mixed methanol/water (1:1) solvent have been determined between 30 and 55°C. The hydrolysis product of 2c , trans‐[Co((BA)₂en)(morpholine)(H₂O)]ClO₄, has been separately prepared and characterized by UV–vis and ¹H NMR spectroscopy. Depending on the nature of the axial amine ligand the limiting first‐order rate constants for the amine hydrolysis at 40°C range from (3.42 ± 0.10) × 10^?5 to (5.32 ± 0.13) × 10^?5 s^?1. At the first glance, a reasonable trend cannot be established between k_h and the basicity or the inductive trans effect of the amine ligands. However, when the complexes are classified into two groups, based on the type of the amine (primary and secondary), the values of k_h correlate well with the basicity or inductive effect of the amine in each group. The observed trend in k_h values for the complexes with primary amines is 1a (5.32 ± 0.13) × 10^?5 s^?1 > 1b (3.51 ± 0.14) × 10^?5 > 1c (1.72 ± 0.03) × 10^?5 (40°C), which is opposite to the amine basicity strength. In the case of the complexes with secondary amines, the observed trend in k_h values is in accord with amine basicity (or inductive trans effect), i.e. 2a (5.02 ± 0.22) × 10^?5 > 2b (4.18 ± 0.10) × 10^?5 > 2c (3.42 ± 0.10) × 10^?5 s^?1 (40°C). © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 387–393, 2002     

Hydrogen atom abstraction selectivity in the reactions of alkylamines with the benzyloxyl and cumyloxyl radicals. The importance of structure and of substrate radical hydrogen bonding

A time-resolved kinetic study on the hydrogen abstraction reactions from a series of primary and secondary amines by the cumyloxyl (CumO(?)) and benzyloxyl (BnO(?)) radicals was carried out. The results were compared with those obtained previously for the corresponding reactions with tertiary amines. Very different hydrogen abstraction rate constants (k(H)) and intermolecular selectivities were observed for the reactions of the two radicals. With CumO(?), k(H) was observed to decrease on going from the tertiary to the secondary and primary amines. The lowest k(H) values were measured for the reactions with 2,2,6,6-tetramethylpiperidine (TMP) and tert-octylamine (TOA), substrates that can only undergo N-H abstraction. The opposite behavior was observed for the reactions of BnO(?), where the k(H) values increased in the order tertiary < secondary < primary. The k(H) values for the reactions of BnO(?) were in all cases significantly higher than those measured for the corresponding reactions of CumO(?), and no significant difference in reactivity was observed between structurally related substrates that could undergo exclusive α-C-H and N-H abstraction. This different behavior is evidenced by the k(H)(BnO(?))/k(H)(CumO(?)) ratios that range from 55-85 and 267-673 for secondary and primary alkylamines up to 1182 and 3388 for TMP and TOA. The reactions of CumO(?) were described in all cases as direct hydrogen atom abstractions. With BnO(?) the results were interpreted in terms of the rate-determining formation of a hydrogen-bonded prereaction complex between the radical α-C-H and the amine lone pair wherein hydrogen abstraction occurs. Steric effects and amine HBA ability play a major role, whereas the strength of the substrate α-C-H and N-H bonds involved appears to be relatively unimportant. The implications of these different mechanistic pictures are discussed.     

Pt-Sn/γ-Al2O3-catalyzed highly efficient direct synthesis of secondary and tertiary amines and imines

Versatile syntheses of secondary and tertiary amines by highly efficient direct N‐alkylation of primary and secondary amines with alcohols or by deaminative self‐coupling of primary amines have been successfully realized by means of a heterogeneous bimetallic Pt–Sn/γ‐Al₂O₃ catalyst (0.5 wt % Pt, Pt/Sn molar ratio=1:3) through a borrowing‐hydrogen strategy. In the presence of oxygen, imines were also efficiently prepared from the tandem reactions of amines with alcohols or between two primary amines. The proposed mechanism reveals that an alcohol or amine substrate is initially dehydrogenated to an aldehyde/ketone or NH‐imine with concomitant formation of a [PtSn] hydride. Condensation of the aldehyde/ketone species or deamination of the NH‐imine intermediate with another molecule of amine forms an N‐substituted imine which is then reduced to a new amine product by the in‐situ generated [PtSn] hydride under a nitrogen atmosphere or remains unchanged as the final product under an oxygen atmosphere. The Pt–Sn/γ‐Al₂O₃ catalyst can be easily recycled without Pt metal leaching and has exhibited very high catalytic activity toward a wide range of amine and alcohol substrates, which suggests potential for application in the direct production of secondary and tertiary amines and N‐substituted imines.