Growth and Raman spectroscopic characterization of As4S4 (II) single crystals

As described by Kutoglu (1976 [16]), single crystals of As₄S₄ (II) phase have been grown using a new two-step synthesis that drastically increases the reproducibility that is attainable in synthetic experiments. First, through photo-induced phase transformation, pararealgar powder is prepared as a precursor instead of AsS melt. Then it is dissolved and recrystallized from CS₂ solvent. Results show that single crystals of the As₄S₄ (II) phase were obtained reproducibly through the dissolution–recrystallization process. Single crystals of As₄S₄ (II) obtained using this method were translucent and showed a uniform yellow-orange color. The crystal exhibits a platelet-like shape as a thin film with well-developed faces (0 1 0) and (0 1¯ 0). The grown crystals are as large as 0.50×0.50×0.01 mm. They were characterized using powder and single crystal X-ray diffraction techniques to confirm the phase identification and the lattice parameters. The As₄S₄ (II) phase crystallizes in monoclinic system with cell parameters a=11.202(4) Å, b=9.954(4) Å, c=7.142(4) Å, β=92.81(4)°, V=795.4(6) Å³, which shows good agreement with the former value. Raman spectroscopic studies elucidated the behavior of the substance and the relation among phases of tetra-arsenic tetrasulfide.     

Synthesis,growth and characterization of organic nonlinear optical bis-glycine maleate (BGM) single crystals

A new organic compound of bis-glycine maleate was synthesized in the alkaline medium of 10% ammonium hydroxide solution. The bulk single crystals of Bis-Glycine Maleate (BGM) have been grown by slow cooling method. The grown crystals were characterized by employing single crystal and powder X-ray diffraction, Fourier transform infrared, optical absorption spectral studies and thermo gravimetric analysis. The microhardness studies confirmed that the BGM has a fairly high Vicker’s hardness number value (41 kg mm⁻²) in comparison to other organic NLO crystals. Second harmonic generation efficiency of the crystal measured by Kurtz–Perry powder method using Nd:YAG laser is found to be comparable to that of potassium dihydrogen phosphate (KDP). Frequency dependent dielectric studies were carried out along the major growth axis.     

Growth and characterization of the nonlinear optical single crystal: l-lysine acetate

Single crystals of l-lysine acetate, an organic nonlinear optical (NLO) material, were grown by the controlled evaporation of its aqueous solutions. Its solubility in aqueous solution was determined gravimetrically. The grown crystals were characterized by the single-crystal diffraction, X-ray powder diffraction, Fourier transform infrared and Raman spectra. The structure analysis reveals that it belongs to the monoclinic crystallographic system, space group P2₁, with cell parameters: a=5.420(2) Å, b=7.542(4) Å, c=12.653(1) Å, β=91.73(1)°, Z=2 and V=516.8 Å³. Experiments of thermogravimetric (TG) and differential thermal analysis (DTA) were carried out to study its thermal properties. The optical behaviours, including transmission spectrum and second harmonic generation (SHG), were investigated to study its linear and NLO properties.     

Growth of thiourea-doped TGS crystals and their characterisation

Thiourea-doped Triglycine sulphate (ThTGS) crystal with three different concentrations of thiourea was grown from aqueous solution by slow cooling technique. The cell parameters were determined from powder X-ray diffraction analysis. A qualitative analysis of the presence of thiourea in doped crystals was estimated by FTIR analysis. Microhardness studies were carried out using Leitz Weitzler hardness tester at room temperature. Dielectric properties of the crystals were studied which showed a shift in the T_c when compared to pure TGS crystal. Pyroelectric studies were carried out and the pyroelectric coefficient was found. Piezoelectric studies (d₃₃ coefficient) has also been carried out.     

Synthesis, growth of organic nonlinear optical crystal: Semicarbazone of 2-amino-5-chloro-benzophenone (S2A5CB) and its characterisation

A new organic crystal of semicarbazone of 2–amino–5–chloro–benzophenone has been grown as a single crystal by slow evaporation solution growth technique for the first time in the literature. The grown crystal has been characterised by proton nuclear magnetic resonance spectral analysis and single crystal and powder X-ray diffraction studies. Functional groups of the crystallised molecules were confirmed by FT-IR and FT-Raman analyses. Mechanical strength of the crystals was studied by microhardness test. Optical transparency of the grown crystals has been studied by UV-Visible spectra. The second harmonic generation property of the compound was analysed.     

Growth and characterization of CdSe single crystals by modified vertical vapor phase method

Good quality, large single crystals of CdSe were grown by the modified growth method (i.e., vertical unseeded vapor phase growth with multi-step purification of the starting material in the same quartz ampoule without any manual transfer between the steps). Lower temperature gradients (8–9°C/cm) at the growth interface were used for the crystal growth. As-grown CdSe crystals was characterized by X-ray diffraction, scanning electron microscopy, energy dispersive analyzer of X-rays, high-resistance instrument measurement, and etch-pit observation. It is found that there are two cleavage faces of (1 0 0) and (1 1 0) orientations on the crystal, the resistivity is about 10⁸ Ω cm, and the density of etch pits is about 10^3–4/cm². The crystal was cut into wafers and was fabricated into detectors. The detectors were tested using an ²⁴¹Am radiation source. γ-ray spectra at 59.5 keV were obtained. The results demonstrated that the quality of the as-grown crystals was good. The crystals were useful for fabrication of room-temperature-operating nuclear radiation detectors. Therefore, the modified growth technique is a promising, convenient, new method for the growth of high-quality CdSe single crystals.     

Growth of CuS platelet single crystals by the high-temperature solution growth technique

Millimeter size CuS single crystals with a dark indigo blue color and a plate hexagonal shape have been successfully grown by the high-temperature solution growth technique using the KCl–LiCl eutectic as solvent. Surface microtopographic studies of the crystals indicated that the growth is made by the lateral spreading of the layers. Electrical resistivity measurements clearly show an anomaly at T55 K, related with the low-temperature structural transition, a high residual resistivity ratio of 400 and a sharp superconducting transition at T≈1.7 K confirming the very good quality of the crystals.     

Flux growth and characterizations of NdPO4 single crystals

Neodymium phosphate single crystals, NdPO₄, have been grown by a flux growth method using Li₂CO₃-2MoO₃ as a flux. The as-grown crystals were characterized by X-ray powder diffraction(XRPD), differential thermal analysis (DTA) and thermogravimetric analysis (TG) techniques. The results show that the as-grown crystals were well crystallized. The crystal was stable over the temperature range from 26 to 1200 °C in N₂. The specific heat of NdPO₄ crystal at room temperature was 0.41 J/g °C. The absorption and the fluorescence spectra of NdPO₄ crystal were also measured at room temperature.     

Growth and optical properties of self-frequency-doubling laser crystal Yb:LuAl3(BO3)4

Single crystal of Yb:LuAl₃(BO₃)₄(Yb:LuAB) was grown by the flux method for the first time. The cell parameters of the grown crystal were estimated by X-ray diffraction analysis. The result indicates the symmetry of trigonal space group R32, with lattice parameters a=b=9.26372 Å, c=7.21405 Å, V=536.14 Å³, and Z=4. The absorption and emission spectra of Yb:LuAB crystal at room temperature has also been studied. The fluorescence lifetime for Yb:LuAB crystal is about 1.48 ms. The heat capacity was measured from 25 to 500 °C. Its second harmonic generation efficiency in LuAl₃(BO₃)₄ crystal is 3–4 times that of KDP crystal. These results show that Yb:LuAB crystal would be a potential self-frequency-doubling laser crystal.     

Growth of single crystals of B28 at high pressures and high temperatures

A method of the high-pressure high-temperature synthesis of single crystals of orthorhombic high-pressure boron B₂₈ from metal solutions is presented. The method is based on the high-pressure multi-anvil technique. The feasibility of single-crystal growth was demonstrated in a number of experiments conducted at various pressure–temperature conditions with various precursors including β-boron of 99.99% purity and various metals (Cu, Au, and Pt) used as fluxes and capsule materials. It was found that after dissolution in metals at high pressures and high temperatures, boron crystallizes in the form of single crystals at low temperature. The process is accompanied by chemical reactions resulting in the formation of borides. The maximum length of the B₂₈ crystals achieved is ∼100 μm.     

Mixed magnesium and nickel nitrate hexahydrates: an unexpected restructuring

Single crystals of the congruently melting equimolar mixture of magnesium nitrate hexahydrate and nickel nitrate hexahydrate have been grown. The compound crystallizes in a structure foreign to both components, namely in the monoclinic cobalt nitrate hexahydrate structure. The cations are located at random on the cation sub-lattice of the latter crystalline structure.     

Unidirectional growth of l-asparagine monohydrate single crystal: First time observation of NLO nature and other studies of crystalline perfection,optical, mechanical and dielectric properties

L-asparagine monohydrate (LAM), a new amino acid single crystal, was grown by slow evaporation solution technique (SEST) as well as by recently invented Sankaranarayanan–Ramasamy (SR) method in aqueous medium. Using SR method, LAM single crystal of diameter ∼18 mm and length ∼52 mm was grown for the first time. The growth conditions were optimized and the maximum growth rate of 1.0 mm per day was observed for the SR crystal. The crystal structure was confirmed by powder XRD. The crystalline perfection was assessed by high resolution XRD and etching studies and found that the quality of the SR crystal is better than the SEST crystal. The UV–vis–NIR spectroscopic study revealed that the SR crystal has good optical transparency than that of SEST crystal. The relative second harmonic generation efficiency was measured and found to be ∼0.35 times to that of KDP. The laser damage threshold (LDT) was measured and found that the SR crystal has higher LDT value (5.76 GW cm⁻²) than SEST crystal (4.75 GW cm⁻²). The Vickers’s microhardness and dielectric studies were also carried out and discussed.     

Preparation,crystal structure,spectrographic characterization,thermal and third order nonlinear optical properties of benzyltriethylamine bis(2-thioxo-1,3-dithiole-4,5-dithiolato)nickel(III)

The preparation and crystal structure of a novel nonlinear optical organometallic crystal, benzyltriethylamine bis(2-thioxo-1,3-dithiole-4,5-dithiolato)nickel(III) (BTEANDT), are described. The crystal was characterized by elemental analyses, infrared and X-ray powder diffraction spectroscopy, thermal analysis and optical absorption. The third order nonlinear optical properties of crystal were investigated by using the Z-scan technique at 1064 nm with 20 ps. A self-focusing effect and a saturable absorption were observed. The nonlinear refraction coefficient (n₂) and the nonlinear absorption coefficient (β) have been found to be 7.311×10⁻¹⁸ m²/W and −6.064×10⁻¹¹ m/W when the on-axis irradiance at focus (I₀) is 3.025 GW/cm². The relationship between β and I₀ was studied, which has revealed that the former is proportional to the latter. The result has been explained with the theory of absorption cross-section.     

Solution growth of single crystals of 4-hydroxycyanobenzene (4HCB) suitable for electronic applications

Squared, platelet-like single crystals of 4-hydroxycyanobenzene (4HCB) have been grown from solutions based on ethylic ether and petroleum ether. Properly modifying the growth conditions, in terms of both solvent used for the growth and concentration of 4HCB in the starting solution, allowed one to tune the planar dimensions of the platelets in the range 2–6 mm, and their thickness in the range 150–600 μm. In this way samples well suited for desired practical manipulation and electronic measurements may be obtained. Moreover, lowering the growth temperature resulted in larger but still thin 4HCB crystals. The ability to tailor crystal thickness has allowed one to study their Space-Charge Limited Current (SCLC) behaviour along that dimension, showing that the so-contacted samples exhibit intrinsic-like bulk conduction behaviour, and are hence well suitable for electronic studies and applications.     

Studies on growth,thermal, optical,vibrational properties and hyperpolarizability of a complex orthonitroaniline with picric acid

The present article reports the growth of single crystals of a complex Orthonitroaniline with picric acid (2[C₆H₆N₂O₂]·C₆H₂(NO₂)₃OH) (ONAP) by solution growth (slow evaporation) method at room temperature. Single crystal XRD, UV–vis spectral analysis and TGA/DTA studies were carried out. FT-IR and Raman spectra were recorded to explore information of the functional groups. The high-resolution X-ray diffraction curve reveals the internal structural low angle boundaries. The PL spectrum of the title compound shows green emission. Dielectric behaviour was investigated at 33 and 70 °C. The dipole moment and first-order hyperpolarizability (β) values were evaluated by using Gaussian 98 W software package with the help of B3LYP the density functional theory (DFT) method. The possible modes of vibrations are theoretically predicted by factor group analysis. The mechanical stability of the grown crystal was tested with Vicker’s microhardness tester and the work hardening coefficient of the grown material was estimated.     

Preparation, characterization and non-linear optical properties of pristine m-nitroaniline (m-NA) and its recycled polystyrene (Re-PS) coated single crystals

Meta-nitroaniline (m-NA) is one of the organic single crystals extensively studied due to its high non-linear effect. m-NA is also known to exhibit comparable or even better non-linear optical (NLO) properties than known inorganic materials. In this paper, we report development of m-NA single crystals by solution growth technique using different solvent systems. The size of the single crystal varies depending on solvent. The highest average crystal size acquired was 10 mm×5 mm×5 mm using methyl ethyl ketone and acetone as solvent. These single crystals were characterized using various physico-chemical techniques such as XRD and scanning electron microscopy (SEM). The developed crystals were subsequently coated with recycled polystyrene (Re-PS) (1, 2, 5 and 10 wt% concentrations) to study the effect of polymer coating on the second harmonic generation (SHG) properties of the single crystals. The purpose of polymer coating on m-NA single crystal is to improve surface morphology of crystal (i.e. it makes surface smooth) and to enhance power handling capacity for pulse laser of a crystal which, in turn, improves the SHG intensity. The optimum percentage of coating was determined for the m-NA single crystals obtained from different solvent systems. Furthermore, the polymer coating also plays key role in preventing the degradation of the m-NA crystal (well-known as highly sublime material) and ultimately increasing the shelf life of the crystal for its device application.     

Growth and characterization of organic material 4-nitrobenzaldehyde single crystal using modified vertical Bridgman technique

The organic material 4-nitrobenzaldehyde single crystal has been grown using the single wall ampoule with nano-translation by modified vertical Bridgman technique. The grown crystal was confirmed by single and powder X-ray diffraction (XRD). Fourier transform infrared (FTIR) analysis was used to identify the functional groups present in the grown crystal. The optical property of the grown crystal was analyzed by UV–vis–NIR and photoluminescence (PL) spectral measurements. The thermal characteristics of the grown crystal were analyzed by thermogravimetric (TG) and differential thermal analyses (DTA). The dielectric measurements were carried out with four different frequencies and the results indicate an increase in dielectric and conductivity parameters with the increase of temperature at all frequencies. The microhardness measurements were used to analyze the mechanical property of the grown crystal.     

Defect characterization and composition distributions of mercury indium telluride single crystals

A mercury indium telluride (MIT) ingot was grown by the vertical Bridgman method. The defects in MIT crystals were characterized by the chemical etching method. A defect etchant for MIT crystals was developed. The etch pits of dislocations, microcracks and boundary was observed by scanning electron microscopy. It was elucidated that the etch pits density of dislocations of MIT wafers was about 4×10⁵ cm⁻². Te and In reduced at the grain boundaries, but were homogeneously distributed within the grains in the as-grown MIT crystals. The distribution of In in MIT crystals along the growth direction and radial direction was analyzed by electronic probe microscopy. It was found that In concentration was higher in the initial part and lower in the final part of the MIT ingot, which indicated that the segregation coefficient of In in MIT crystals was 1.15. The radial In concentration increased from the center to edge of the wafers and homogeneous in the middle part.     

Kinetics of (R,S)- and (R)-mandelic acid in an unseeded cooling batch crystallizer

The objective of this work is to determine the nucleation and growth kinetics of (R,S)-mandelic acid ((R,S)-MA) and (R)-mandelic acid ((R)-MA) in aqueous solutions using an unseeded cooling crystallization process. To obtain the nucleation and growth kinetics, the solubility, metastable zone limits, and supersaturation were measured by in-situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and focused beam reflectance measurement (FBRM). The nucleation rate and growth rate parameters were determined by a nonlinear optimization algorithm. The effects of initial concentration and cooling rate on supersaturation and the nucleation rate are also discussed.     

Growth of (CH3)2NH2CuCl3 single crystals using evaporation method with different temperatures and solvents

The bulk single crystals of low-dimensional magnet (CH₃)₂NH₂CuCl₃ (DMACuCl₃ or MCCL) are grown by a slow evaporation method with different kinds of solvents, different degrees of super-saturation of solution and different temperatures of solution, respectively. Among three kinds of solvent, methanol, alcohol and water, alcohol is found to be the best one for growing MCCL crystals because of its structural similarity to the raw materials and suitable evaporation rate. The best growth temperature is in the vicinity of 35 °C. The problem of the crystals deliquescing in air has been solved through recrystallization process. The crystals are characterized by means of X-ray diffraction, specific heat and magnetic susceptibility.