Polarographic behaviour of uranium (VI) in organic solutions

Polarographic determination of uranium (VI) has been studied in the organic extraction phase TBP—diluent along with a selected aprotic solvent (i. e. dimethyl sulfoxide or N,N-dimethylformamide). DMF was found more suitable because it dissolves the organic extraction phase better than DMSO. U (VI) extracted in TBP-kerosene, n-hexane, cyclohexane, n-dodecane, benzene, from nitric acid medium can be determined in an organic solution (e. g. 50% DMF-30% TBP-20% kerosene) where it gives a well defined wave. In the organic solution, nitric acid added and/or extracted from the aqueous phase was found as an excellent supporting electrolyte for uranium determination.     

Distribution of phenoxyacetic acid in two-phase organic solvent-water systems

The distribution of phenoxyacetic acid in two-phase organic solvent-water systems and its dimerization in the organic phase were studied. Organic solvents were normal aliphatic alcohols (C₅–C₁₀), benzene, and its derivatives. The distribution (K _dis) and dimerization (K _dim) constants of this acid were determined. The correlations of these quantities with physicochemical parameters of the organic solvents were revealed. The influence of the organic solvent polarity, pH of the aqueous phase, and acid concentration on the physicochemical behavior of the acid in the two-phase systems was analyzed.     

Percolation of the organic phase in hybrid organic–inorganic aerogels

The properties (texture, mechanical behaviour, etc.) of hybrid organic–inorganic silica aerogels change dramatically when the concentration of the organic additive is varied from a given value. It has been known for several years that this critical concentration is around 40% of the total weight of silica present in the sample. We have made use of a new structural model to conclude that this concentration of 40% by weight corresponds to the percolation threshold of the organic phase.     

萃取有机相的微结构和性质的研究

本文用FTIR, 荧光, ICP/AES等方法研究了含稀土的HDEHP[二(2-乙基己基)磷酸, HA]-正庚烷的萃取有机相的结构和聚集态。结果表明: (1)不同稀土离子与萃取剂的配位能力不一样, La相似文献   

Solid‐phase microextraction Arrow for the volatile organic compounds in soy sauce

A novel solid‐phase microextraction Arrow was used to separate volatile organic compounds from soy sauce, and the results were verified by using gas chromatography with mass spectrometry. Solid‐phase microextraction Arrow was optimized in terms of three extraction conditions: type of fiber used (polydimethylsiloxane, polyacrylate, carbon wide range/polydimethylsiloxane, and divinylbenzene/polydimethylsiloxane), extraction temperature (40, 50, and 60°C), and extraction time (10, 30, and 60 min). The optimal solid‐phase microextraction Arrow conditions were as follows: type of fiber = polyacrylate, extraction time = 60 min, and extraction temperature = 50°C. Under the optimized conditions, the solid‐phase microextraction Arrow was compared with conventional solid‐phase microextraction to determine extraction yields. The solid‐phase microextraction Arrow yielded 6–42‐fold higher levels than in solid‐phase microextraction for all 21 volatile organic compounds detected in soy sauce due to the larger sorption phase volume. The findings of this study can provide practical guidelines for solid‐phase microextraction Arrow applications in food matrixes by providing analytical methods for volatile organic compounds.     

Speciation of antimony by differential generation of its volatile covalent hydride in aqueous and organic phase

By using the ammonium pyrrolidinedithiocarbamate (APDC) — methylisobutyl ketone (MIBK) extraction system Sb(III) is extracted into the organic phase. Sb(III) is directly determined in this organic phase by hydride generation AAS using NaBH₄/dimethylformamide solution as reducing agent. Sb(V) is determined in the aqueous phase using the same technique.     

Autowave exothermic organic synthesis in the mixes of organic solids

The autowave modes of organic exothermic synthesis in the mixes of organic solids were studied. A traveling wave of exothermic reaction of organic synthesis appeared in the mixes at local thermal ignition. Useful low‐molecular organic compounds having, at least, synthetic value were found out with good yields after the reactions. Autowave modes were observed in different classes of organic reactions – red‐ox, halogenation, protonation, acylation, imination etc. The possibility to organize the autowave modes is determined by the exothermic nature of the reaction (≥20 kJ/mol), phase condition and thermal stability of the reagents and products. Main peculiarities, kinetics and mechanisms of the reactions in autowave modes were investigated. The basic advantages of autowave exothermic synthesis in organic solids were analyzed.     

Effects of organic mobile phase modifiers in micellar electrokinetic capillary chromatography

The addition of 1–20% (v/v) of methanol or acetonitrile as organic modifier to the mobile phase in a micellar electrokinetic capillary chromatographic (MECC) system, containing sodium dodecyl sulfate and a buffer, is shown to extend the elution range and thus increase the peak capacity of a given system. Although the net change in the elution range parameter, t_o/t_mc, is essentially the same for both modifiers, the acetonitrile-modified system exhibits much faster elution times for the polar and non-polar test solutes employed in this study. Retention, as measured by the capacity factor, is generally decreased with the increase of an organic modifier, just as in conventional reversed phase chromatography. However, changes in selectivity as a function of the added modifiers are noted among polar and non-polar solutes as well. The efficiency of these MECC systems is increased with the addition of either organic modifier.     

Isolation and determination of dissolved organic sulphur compounds — development of the organic group parameter DOS

A procedure has been worked out for the determination of organic sulphur compounds (OSCs) in aqueous solution. They are isolated from water by solid phase extraction on macroporous resins and reversed-phase sorbents. The total sulphur content of the extracts is determined via a process of thermal cracking and hydrogenation (pyrohydrogenolysis) of small amounts of extract in a heated quartz tube (1100°C) flushed with hydrogen. Sulphur is detected at a wavelength of 394 nm in the hydrogen flame of a flame photometer. The flame photometric detector (FPD) is calibrated with a coulometric H₂S-generator. The procedure of solid phase extraction and subsequent pyrohydrogenolysis/flame photometry of the extracts can be used to determine the organic group parameter DOS (Dissolved Organic Sulphur) in the range of 20–1000 μg/1.     

Investigation of multilevel ion-pairing effect of triferrocenylmethane in organic phase

The intramolecular electronic communication and multilevel ion-pairing effect of triferrocenylmethane（TriFcM） in organic phase was studied with the ＂thin-layer electrochemistry＂ approach.Three pairs of symmetric peaks in cyclic voltammetry of TriFcM correspond to three one-electron electrochemical reaction processes and indicate strong intramolecular electronic communication,which could be used to study the multilevel ion-pairing effect.Three different formation constants of ion-pairs between the three ferroceniums of TriFcM and perchlorate in thin organic film were obtained and compared.     

Isolation and determination of dissolved organic sulphur compounds — development of the organic group parameter DOS

A procedure has been worked out for the determination of organic sulphur compounds (OSCs) in aqueous solution. They are isolated from water by solid phase extraction on macroporous resins and reversed-phase sorbents. The total sulphur content of the extracts is determined via a process of thermal cracking and hydrogenation (pyrohydrogenolysis) of small amounts of extract in a heated quartz tube (1100° C) flushed with hydrogen. Sulphur is detected at a wavelength of 394 nm in the hydrogen flame of a flame photometer. The flame photometric detector (FPD) is calibrated with a coulometric H₂S-generator. The procedure of solid phase extraction and subsequent pyrohydrogenolysis/flame photometry of the extracts can be used to determine the organic group parameter DOS (Dissolved Organic Sulphur) in the range of 20– 1000 μg/l. Received: 12 March 1996 / Revised: 25 April 1996 / Accepted: 30 April 1996     

Solvent extraction of thorium(IV) with dibutyldithiophosphoric acid in various organic solvents

The extraction of thorium(IV) from perchlorate solutions with di-n-butyldithiophosphoric acid (HBudtp) in various organic solvents occurs through an ion exchange mechanism. The extracted species in the organic phase is an eight-coordinate complex Th(Budtp)₄. The higher values of the distribution ratio obtained in HBudtp-benzene-water system than in HBudtp-n-butanol-water system are explained by higher solubility of the complex species in nonpolar solvents. The position of the extraction curves in the pH-range lower than 0.7 reduces the complexation of thorium(IV) with Budtp^– in the aqueous phase and also the hydrolysis process.     

Use of volatile organic solvents in headspace liquid‐phase microextraction by direct cooling of the organic drop using a simple cooling capsule

A low‐cost and simple cooling‐assisted headspace liquid‐phase microextraction device for the extraction and determination of 2,6,6‐trimethyl‐1,3 cyclohexadiene‐1‐carboxaldehyde (safranal) in Saffron samples, using volatile organic solvents, was fabricated and evaluated. The main part of the cooling‐assisted headspace liquid‐phase microextraction system was a cooling capsule, with a Teflon microcup to hold the extracting organic solvent, which is able to directly cool down the extraction phase while the sample matrix is simultaneously heated. Different experimental factors such as type of organic extraction solvent, sample temperature, extraction solvent temperature, and extraction time were optimized. The optimal conditions were obtained as: extraction solvent, methanol (10 μL); extraction temperature, 60°C; extraction solvent temperature, 0°C; and extraction time, 20 min. Good linearity of the calibration curve (R² = 0.995) was obtained in the concentration range of 0.01–50.0 μg/mL. The limit of detection was 0.001 μg/mL. The relative standard deviation for 1.0 μg/mL of safranal was 10.7% (n = 6). The proposed cooling‐assisted headspace liquid‐phase microextraction device was coupled (off‐line) to high‐performance liquid chromatography and used for the determination of safranal in Saffron samples. Reasonable agreement was observed between the results of the cooling‐assisted headspace liquid‐phase microextraction high‐performance liquid chromatography method and those obtained by a validated ultrasound‐assisted solvent extraction procedure.     

Ion exchange in organic solvents

Studies on the partitioning of plutonium from 30% TBP by ion-exchange absorption on macroporous cation exchanger Amberlyst-15 have been described. Detailed loading experiments indicate that the resin absorbs plutonium in preference to uranium from loaded organic phase at low organic phase acidities (around 0.2M). Absorption behaviour of some fission products on the resin in 30% TBP is also reported. Possibility of using this procedure as an alternate method for plutonium partitioning from IAP stream of Purex process has been discussed.     

On the influence of some strong electrolytes on the partitioning of acetic acid to aqueous/organic two-phase systems in the presence of tri-n-octylamine: Part I: Methyl isobutyl ketone as organic solvent

The recovery of carboxylic acids from aqueous phases is often achieved by reactive extraction with water-insoluble amines which are dissolved in an organic solvent. The basic design of such downstream processes requires a thermodynamic framework for the encountered liquid–liquid equilibrium. The thermodynamic framework should be able to describe the rather uncommon and surprising effects that comparatively small amounts of strong electrolytes might have. Such strong electrolytes can either reduce or increase the affinity of a carboxylic acid for the organic phase in particular at low aqueous phase concentrations of the carboxylic acids. That behavior was explained in previous investigations with citric acid as a model compound for a carboxylic acid and modeled by combining the dissociation/protonation equilibrium in the aqueous phase with the formation of organic phase complexes of (amine + acid(s) + water). In the present investigation this work is extended to acetic acid as another example for a carboxylic acid. New experimental results are reported for the influence of sodium chloride, sodium nitrate, sodium sulfate, sodium citrate and hydrochloric acid on the partitioning of acetic acid to coexisting aqueous/organic liquid phases of the system (water + methyl isobutyl ketone (organic solvent) + tri-n-octylamine (chemical extractant)) at 25 °C. The phase behavior is described by an extension of the previously published thermodynamic framework that is able to describe/predict the influence of a strong electrolyte on the partitioning of acetic acid.     

A microfluidic device for open loop stripping of volatile organic compounds

The detection of volatile organic compounds is of great importance for assessing the quality of water. In this contribution, we describe a miniaturized stripping device that allows fast online detection of organic solvents in water. The core component is a glass microfluidic chip that facilitates the creation of an annular-flowing stream of water and nitrogen gas. Volatile compounds are transferred efficiently from the water into the gas phase along the microfluidic pathway at room temperature within less than 5 s. Before exiting the microchip, the liquid phase is separated from the enriched gas phase by incorporating side capillaries through which the hydrophilic water phase is withdrawn. The gas phase is conveniently collected at the outlet reservoir by tubing. Finally, a semiconductor gas sensor analyzes the concentration of (volatile) organic compounds in the nitrogen gas. The operation and use of the stripping device is demonstrated for the organic solvents THF, 1-propanol, toluene, ethylbenzene, benzaldehyde, and methanol. The mobile, inexpensive, and continuously operating system with liquid flow rates in the low range of microliters per minute can be connected to other detectors or implemented in chemical production line for process control.

Optimized cleanup methods of organic extracts for the determination of organic pollutants in biological samples

The analytical performances of various adsorbents used to clean up an organic extract of biological samples, particularly for the determination of polycyclic aromatic hydrocarbons (PAHs), polychlorobiphenyls (PCBs), both in mussel tissue and in krill samples, are critically compared. DDT and its degradation products, namely DDE and DDD, are also considered. Silica gel, alumina, aminopropyl-silica, cyanopropyl-silica, florisil, graphitized nonporous carbon and silica gel–alumina mixture (3:1) were used for column chromatography cleanup in combination with modified supercritical CO₂ as a mobile phase. Recovery and reproducibility were evaluated by analyzing standard solutions and standard reference materials containing various classes of pollutants. A silica gel–alumina mixture was found to be the most effective in the cleanup of organic extracts, allowing quantitative recoveries of all analytes to be obtained. Finally, the application of the optimized procedure to the determination of PCBs in Antarctic krill samples is presented.     

固相有机合成研究进展

组合化学技术给固相有机合成带来了新的发展契机,同时也提出了新的发展要求。目前这一研究领域发展迅速,应用范围不断扩大,技术日臻完善。本文综述了近期固相有机合成研究方面的最新进展。     

On the influence of some inorganic salts on the partitioning of citric acid between water and organic solutions of tri-n-octylamine: Part I: Methyl isobutyl ketone as organic solvent

Reactive extraction is a commonly applied process to recover carboxylic acids from aqueous solutions. Such processes are nowadays designed using process simulation software. However, the essential prerequisite for such a simulation is the availability of a reliable thermodynamic model for the encountered phase equilibrium. Industrial experience revealed that even very small amounts of a strong electrolyte (e.g., sodium chloride) can considerably reduce the amount of carboxylic acid extracted from the aqueous into the organic phase. This contribution presents new experimental results for the influence of sodium nitrate, sodium chloride, sodium sulfate, sodium citrate and hydrochloric acid on the partitioning of citric acid to the coexisting aqueous/organic liquid phases of the system water + methyl isobutyl ketone (organic solvent) + tri-n-octylamine (chemical extractant) at 25 °C. A detailed discussion of the experimental results reveals that the dramatic decrease of the partition coefficient of carboxylic acid is caused by the chemical loading of the extractant by the inorganic acid, i.e. both acids (the weak carboxylic acid as well as the strong inorganic acid) compete for the sodium ions (in the aqueous phase) and for the amine (in the organic phase). In phase equilibrium the amine is predominantly loaded with the inorganic acid while the sodium salt of the carboxylic acid remains in the aqueous phase. That behavior is described by a thermodynamic framework that is able to predict the complex liquid–liquid equilibrium from information determined exclusively from investigations on subsystems.     

Liquid-liquid phase-transfer of magnetic nanoparticles in organic solvents

We report a novel route for the preparation of well-defined colloidal dispersions of magnetic nanoparticles stabilized by steric repulsion in organic solvents. The usual methods standardly lead to the surfaction of multiparticle aggregates, incompatible with our long-term aim of studying and modeling the influence of magnetic dipolar interactions in colloidal dispersions which are free of aggregates, all other interactions being perfectly defined. A new and reproducible method based on a surfactant-mediated liquid-liquid phase transfer of individually dispersed gamma-Fe(2)O(3) nanoparticles from an aqueous colloidal dispersion to an organic phase is developed. The choice of the reagent and the preparation techniques is discussed. Among several solvent/surfactant pairs, the cyclohexane/dimethyldidodecylammonium bromide (DDAB) system is found to fulfill the colloidal stability criterion: aggregation does not appear, even upon aging. A complete transfer of isolated particles is observed above a threshold in DDAB concentration. The nanoparticle surface is then fully covered with adsorbed DDAB molecules, each surfactant head occupying a surface of 0.57+/-0.05 nm(2). The volume fraction of the cyclohexane-based organosols is easily tunable up to a volume fraction of 12% by modifying the volume ratio of the organic and of the aqueous phases during the liquid-liquid phase transfer.