Nitrogen-doped TiO2 thin films: photocatalytic applications for healthcare environments

N-doped TiO(2) has for many years received interest as visible light photocatalytic materials. Here we give our perspective on the subject with special consideration towards the use of visible light photocatalysts in the field of antimicrobial materials with applications in healthcare environments. The subject is reviewed and critiqued from synthetic techniques to characterisation and assessment of functional properties. N-doped TiO(2) has huge potential to form commercially viable antimicrobial surfaces that are easily implemented within the healthcare environment. We aim to shed light on the illusive nature of the mechanism of the different types of N-doping and comment on how these affect the properties of the catalysts themselves. Small concentrations of nitrogen doped under mild conditions lead to interstitial doping, which also promotes the creation of oxygen vacancies. Many believe that it is these oxygen vacancies that actually promote the formation of visible light photocatalysis and hence there is an indirect correlation between the interstitial doping and the photocatalysis. As the concentration of interstitial nitrogen increases the oxygen vacancies increase, however the presence of oxygen vacancies in turn encourages substitutional doping which then fills the oxygen vacancies. This cyclic relationship leads to photocatalysts that are very sensitive to changing nitrogen concentration.     

Studies on photocatalytic activity of Ag/TiO2 films

Ag/TiO₂ photocatalytic films were produced by hybrid sol-gel method. The photocatalytic degradation of methyl orange (MO) in aqueous solution under 365 nm irradiation on TiO₂ and Ag/TiO₂ thin films was investigated. The state and amount of Ag species within the film and the enhancement mechanism of photocatalytic activity of Ag/TiO₂ were discussed. With a loading molar ratio of Ag/Ti = 0.135 in TiO₂ film, the maximum catalytic efficiency was observed. __________ Translated from Journal of Beijing Normal University (Natural Sciences), 2005, 41(6) (in Chinese)     

Nature of surface oxygen intermediates on TiO2 during photocatalytic splitting of water

The surface oxygenated intermediates present on TiO₂ during photocatalytic water splitting have been identified and their accumulation on the titania surface is responsible for the deactivation of H₂ evolution rate during photocatalysis.     

Modification of photocatalytic TiO2 thin films by electron beam irradiation

Noble metal-modified TiO₂ films were prepared by electron beam deposition of Pt, Pd, Au and Ag on the surface of TiO₂ films with diameters ranging from <1 nm to 500 nm. The morphology of the films was characterized by X-ray diffractometry (XRD), field emission scanning electron microscope (FMSEM) and transmission electron microscope (TEM). The photocatalytic capability of the films were tested and compared by degradation of methyl orange (MO) in aqueous solutions under both UV and visible light illumination.     

Atomic layer deposition of TiO2−xNx thin films for photocatalytic applications

Titanium dioxide (TiO₂) is recognized as the most efficient photocatalytic material, but due to its large band gap energy it can only be excited by UV irradiation. Doping TiO₂ with nitrogen is a promising modification method for the utilization of visible light in photocatalysis. In this work, nitrogen-doped TiO₂ films were grown by atomic layer deposition (ALD) using TiCl₄, NH₃ and water as precursors. All growth experiments were done at 500 °C. The films were characterized by XRD, XPS, SEM and UV–vis spectrometry. The influence of nitrogen doping on the photocatalytic activity of the films in the UV and visible light was evaluated by the degradation of a thin layer of stearic acid and by linear sweep voltammetry. Light-induced superhydrophilicity of the films was also studied. It was found that the films could be excited by visible light, but they also suffered from increased recombination.     

TEM evidence of ultrastructural alteration on Pseudomonas aeruginosa by photocatalytic TiO2 thin films

The antibacterial efficiency of longwave UV-irradiated TiO(2) thin films as well as the ultrastructural damage on bacterial cells was evaluated using Pseudomonas aeruginosa as a model. The quantitative antibacterial efficiency assays showed a bacterial inhibition in the range of 32-72% at different times of irradiation. Transmission electron microscopy (TEM) was used to detect the effect of irradiation of TiO(2) thin films on the ultrastructure of the bacterial cell in order to reveal possible cellular damage. After 40 min irradiation, an abnormal cellular division was observed: instead of a normal septum, an 'elongated bridge' was formed. At a longer irradiation time, wavy structures all around the outer cell membrane were observed, and also some bubble-like protuberances, which expelled inner material. The mechanism of irreversible bacterial cell damage caused by the photocatalytic effect of TiO(2) could be related to abnormal cell division, aside from the reported physicochemical alteration of the cell membrane.     

Photoinduced hydrophilic and photocatalytic response of hydrothermally grown TiO2 nanostructured thin films

It is demonstrated that nanostructured titanium (IV) oxide (TiO₂) films can be deposited on glass substrates at 95 °C using hydrothermal growth, their properties being greatly affected by the substrate materials. Anatase TiO₂ films grown on ITO for deposition period of 50 h were observed to exhibit a very efficient, reversible light-induced transition to super-hydrophilicity, reaching a nearly zero contact angle. Enhanced photocatalytic activity (65%) was found for the rutile TiO₂ samples grown on microscope glass, possibly due to their higher roughness with respect to anatase grown on ITO. The effect of the substrate material used is discussed in terms of the TiO₂ phase and morphology control, for the best photoinduced hydrophilic and photocatalytic performance of the samples.     

Role of micro-structure and interfacial properties in the higher photocatalytic activity of TiO2-supported nanogold for methanol-assisted visible-light-induced splitting of water

This paper deals with the textural, microstructural and interfacial properties of Au/TiO(2) nanocomposites, in relation to their photocatalytic activity for splitting of water. TiO(2) samples of two different morphologies were employed for dispersing different cocatalysts, such as: Au, Pt, Ag or Cu, for the sake of comparison. The samples were characterized using powder XRD, XPS, UV-visible, thermoluminescence, SEM, HRTEM and SAED techniques. Compared to other metal/TiO(2) photocatalysts, Au/TiO(2) with an optimum gold loading of 1 wt% was found to exhibit considerably higher activity for visible light induced production of H(2) from splitting water in the presence of methanol. Further, the sol-gel prepared TiO(2) (s.TiO(2)), having spherical grains of 10-15 nm size, displayed better photoactivity than a Degussa P25 catalyst. The electron microscopy investigations on s.TiO(2) revealed significant heterogeneity in grain morphology of individual TiO(2) particles, exposure of the lattice planes, metal dispersion, and the interfacial metal/TiO(2) contacts. The gold particles were found to be in a better dispersed state. O(2) TPD experiments revealed that the gold nanoparticles and Au/TiO(2) interfaces may serve as distinct binding sites for adsorbate molecules. At the same time, our thermoluminescence measurements provide an insight into Au-induced new defect states that may facilitate the semiconductor-to-metal charge transfer transition. In conclusion, the superior photocatalytic activity of Au/TiO(2) may relate to the grain morphology of TiO(2), dispersion of gold particles, and the peculiar architecture of metal/oxide heterojunctions; giving rise in turn to augmented adsorption of reactant molecules and their interaction with the photo-generated e(-)/h(+) pair. The role played by methanol as a sacrificial reagent in photocatalytic splitting of water is discussed.     

TiO2 surface active sites for water splitting

The mechanism of photoreactivity between the TiO(2) surface and H(2)O, and the related charge transfer, is considered in terms of both collective and local properties. It is shown that the effective charge transfer between TiO(2) and water requires the presence of surface active sites that are able to provide electron holes to adsorbed water molecules. Titanium vacancies located at or near the surface are identified as the active sites for water adsorption leading to the formation of an active complex and resulting, in consequence, in water splitting. A model of the photoreactivity between the TiO(2) surface and water is proposed. This model indicates that the photoreactivity of the TiO(2)-based photoelectrode may be enhanced through imposition of the surface active sites (Ti vacancies) in a controlled manner by surface engineering.     

Synthesis and photocatalytic properties of highly crystalline and ordered mesoporous TiO2 thin films

Highly crystalline and ordered mesoporous TiO2 thin films have been synthesized by stabilization of the mesostructure with confined carbon; the films exhibit 2.5% photoconversion efficiency for the water photolysis at zero-bias and Xe lamp illumination of 40 mW cm(-2).     

N2/Ar等离子体改性对CuO/TiO2可见光光催化活性的影响

研究了N2/Ar介质阻挡放电处理对负载CuO的TiO2可见光光催化活性的影响.采用X射线衍射、紫外-可见分光吸收光谱、透射电镜、X射线光电子能谱和电子自旋共振进行了表征,详细考察了等离子改性参数包括气氛组成、处理时间和处理功率对改性效果的影响,并通过降解甲基橙溶液考察了可见光光催化活性.结果表明,最佳等离子处理条件为N2与Ar比例为8:2,处理时间为20 min,放电电流为1.0 A.最后,使用改性后的光催化剂对模拟含汞废水进行了处理.     

Increased photocatalytic activity induced by TiO2/Pt/SnO2 heterostructured films

In this work, a high photocatalytic activity was attained by intercalating a Pt layer between SnO₂ and TiO₂ semiconductors, which yielded a TiO₂/Pt/SnO₂ - type heterostructure used in the discoloration of blue methylene (MB) solution. The porous films and platinum layer were obtained by electrophoretic deposition and DC Sputtering, respectively, and were both characterized morphologically and structurally by FE-SEM and XRD. The films with the Pt interlayer were evaluated by photocatalytic activity through exposure to UV light. An increase in efficiency of 22% was obtained for these films compared to those without platinum deposition. Studies on the reutilization of the films pointed out high efficiency and recovery of the photocatalyst, rendering the methodology favorable for the construction of fixed bed photocatalytic reactors. A proposal associated with the mechanism is discussed in this work in terms of the difference in Schottky barrier between the semiconductors and the electrons transfer and trapping cycle. These are fundamental factors for boosting photocatalytic efficiency.     

Nanostructured CuO/SrTiO3 bilayered thin films for photoelectrochemical water splitting

Bilayered thin films of CuO/SrTiO₃ with varying thickness of CuO were deposited by sol–gel spin-coating technique on indium tin oxide substrate and used as photoelectrode in the photoelectrochemical cell for water splitting reaction. Maximum photocurrent density of 1.85 mA/cm² at ?0.9 V/saturated calomel electrode was exhibited by 590-nm-thick CuO/SrTiO₃ bilayered photoelectrode, which is approximately eight times higher than that for CuO and 30 times higher than that for SrTiO₃. The bilayered system offered increased photocurrent density and enhanced photoconversion efficiency, attributed to improved conductivity, which ameliorate separation of the photo-generated carriers at the CuO/SrTiO₃ interface and higher value of flatband potential. Details about synthesis and various characterisations involving X-ray diffraction and scanning electron microscopy have been discussed. An energy band diagram has been proposed to dwell upon the mechanism of charge carrier transfer across the interface.     

Effect of the RF-discharge plasma treatment of thin polyimide films on water diffusion

The effects of the treatment of thin polyimide films of different thickness (2–7.5 µm), which were prepared from poly(amic acid) solutions, in a radiofrequency-discharge plasma on the diffusion of water and the permittivity were studied. It was found that the diffusion coefficients of water in the films increased with film thickness. The increase of the diffusion coefficients by a factor of 4–24 and an increase in the permittivity by a factor of 1.5–2 after the action of an RF discharge on the films was explained by an increase in the amount of polar groups and the formation of an excess negative charge, which was injected from the plasma, in the bulk of the films.__________Translated from Khimiya Vysokikh Energii, Vol. 39, No. 3, 2005, pp. 232–236.Original Russian Text Copyright © 2005 by Zhukova, Zhukov, Drachev.     

Lithium niobate nanowires for photocatalytic water splitting

Molecule-based preparation of lithium niobate nanowires was achieved by proper combination of a niobium oxooxalate complex, a structure-directing reagent, and a lithium source. Structural and photophysical properties of the nanowires obtained were characterized by several microscopic and spectroscopic techniques. The nanowire was employed as a photocatalyst for overall water splitting, and H(2) or O(2) evolution reaction from an aqueous solution containing a sacrificial reagent under UV light irradiation to show enhanced photocatalytic properties as compared with a bulky counterpart prepared by a solid state reaction. The factors contributing to the enhancement of the photocatalytic performance were suggested to be an increase in active sites for the photocatalytic reaction in conjunction with a large surface area and a small particle size.     

Effect of carbon content on photocatalytic activity of C/TiO2 composite

A series of carbon-covered titania (CCT) were prepared via pyrolysis of sucrose highly dispersed on titania surface in flowing N₂. The samples were characterized by XRD, BET, DTA-TG, UV—Vis, and their photocatalytic properties were evaluated with two model pollutants, methylene blue (MB) and rhodamine B (RB), at room temperature. The effect of carbon content on photocatalytic activity of the C/TiO₂ composite was investigated. It was found that the effect of carbon content is different for different pollutants or different light sources. For three tested samples, under UV illumination CCT01 has the highest activity for MB photocatalytic degradation, while in the case of RB, CCT02 is the most active photocatalyst. Under visible light illumination, CCT005 has the highest activity for both MB and RB photocatalytic degradation. Translated from Chinese Journal of Catalysis, 2006, 27(1): (in Chinese)     

Visible light active hydrogen modified (HM)-n-TiO2 thin films for photoelectrochemical splitting of water

Visible light active hydrogen modified n-type titanium oxide (HM-n-TiO₂) thin films were synthesized by thermal oxidation of Ti metal sheet (Alfa Co. 0.25 mm thick) in an electric oven followed by incorporation of hydrogen electrochemically under cathodic polarization at ?1.6 V vs Pt. The photoresponse of the HM-n-TiO₂ was evaluated by measuring the rate of water splitting reaction to hydrogen and oxygen in terms of photocurrent density, J_p. The optimized electric oven-made n-TiO₂ and HM-n-TiO₂ photoelectrodes showed photocurrent densities of 0.2 mA cm^?2 and 1.60 mA cm^?2, respectively, at a measured potential of ?0.4 V vs Pt at illumination intensity of 100 mW cm^?2 from a 150 W xenon lamp. This indicated an eightfold increase in photocurrent density for HM-n-TiO₂ compared to oven-made n-TiO₂ at the same measured electrode potential. The band-gap energy of HM-n-TiO₂ was found to be 2.7 eV compared to 2.82 eV for electric oven-made n-TiO₂ and a mid-gap band at 1.67 eV above the valence band was also observed. The HM-n-TiO₂ thin film photoelectrodes were characterized using photocurrent density under monochromatic light illumination and UV–Vis spectral measurements.