A Monte Carlo-quantum mechanics study of the lowest n-pi* and pi-pi* states of uracil in water

The solvatochromic shifts of the n-pi(*) and pi-pi(*) states of uracil in water are analyzed using a combined and sequential Monte Carlo/quantum mechanics (MC/QM) approach. The role of the solute polarization and electronic delocalization into the solvent region are investigated. Electronic polarization of the solute is obtained using the HF/6-31G(d), the polarizable continuum model (PCM) and an iterative procedure using MP2/aug-cc-pVDZ in the MC/QM. The in-water dipole moment of uracil is obtained, respectively, as 5.12 D, 6.12 D and 7.01 +/- 0.05 D. This latter result, corresponding to an increase of 60% with respect to the gas phase value, is used in the classical potential of the MC simulation to obtain statistically uncorrelated configurations for subsequent QM calculations of the ultraviolet-visible absorption spectrum of uracil in water. QM calculations are performed at the time-dependent density-functional theory (TD-DFT) combined with the B3LYP and B3PW91 functionals, multiconfigurational (CASSCF) and the semi-empirical all-valence electron INDO/CIS methods. Using 60 solute-solvent configurations with the explicit inclusion of 200 water molecules the solvatochromic shift is obtained as a blue shift of 0.50 eV for the n-pi(*) state and a red shift of 0.19 eV for the pi-pi(*) state, in good agreement with experimentally-inferred values. These results are compared with TD-DFT results in conjunction with PCM approaches and the importance of solute polarization and wave function delocalization over the solvent region is discussed. Our results suggest that the elusive n-pi(*) state of uracil in water lies around 255 nm hidden by the intense and broad pi-pi(*) transition with a maximum at 260 nm, inverting the relative locations of these states compared to the gas phase. This is further supported by considering the in-water dipole moment changes upon excitation, as obtained from CASSCF calculations.     

Probing supercritical water with the n-pi* transition of acetone: a Monte Carlo/quantum mechanics study

The n-pi(*) electronic transition of acetone is a convenient and important probe to study supercritical water. The solvatochromic shift of this transition in supercritical water (adopting the experimental condition of P=340.2 atm and T=673 K) has been studied theoretically using Metropolis NPT Monte Carlo (MC) simulation and quantum mechanics (QM) calculations based on INDO/CIS and TDDFT-B3LYP6-31+G(d) methods. MC simulations are used to analyze hydration shells, solute-solvent interaction, and for generating statistically relevant configurations for subsequent QM calculations of the n-pi(*) transition of acetone. The results show that the average number of hydrogen bonds between acetone and water is essentially 13 of that in normal water condition of temperature and pressure. But these hydrogen bonds have an important contribution in the solute stabilization and in the solute-solvent interaction. In addition, they respond for nearly half of the solvatochromic shift. The INDO/CIS calculations explicitly considering all valence electrons of the water molecules, using different solvation shells, up to the third shell (170 water molecules), give a solvatochromic shift of 670+/-36 cm(-1) in very good agreement with the experimentally inferred result of 500-700 cm(-1). It is found that the solvatochromic effect on n-pi(*) transition of acetone in the supercritical condition is essentially given by the first solvation shell. The time-dependent density-functional theory (TDDFT) calculations are also performed including all solvent molecules up to the third shell, now represented by point charges. This TDDFT-B3LYP6-31+G(d) also gives a good but slightly overestimated result of 825+/-65 cm(-1). For comparison the same study is also made for acetone in water at normal condition. Finally, all average results reported here are statistically converged.     

Double ionization of quaterrylene (C40H20) in water-ice at 20 K with Ly alpha (121.6 nm) radiation

Polycyclic aromatic hydrocarbon (PAH) molecules undergo facile ionization in cryogenic water-ices resulting in near quantitative conversions of neutral molecules to the corresponding singly charged radical cations. Here we report, for the first time, the production and stabilization of a doubly ionized, closed shell PAH in water-ice. The large PAH quaterrylene (QTR, C40H20) is readily photoionized and stabilized as QTR 2+ in a water-ice matrix at 20 K. The kinetic analysis of photolysis shows that the QTR 2+ is formed at the expense of QTR +, not directly from QTR. The long-axis polarized S1-S0 (1(1)B(3u) <-- 1(1)Ag) transition for QTR 2+ falls at 1.59 eV (782 nm). TD-DFT calculations at the B3LYP level predict that this transition falls at 1.85 eV (670 nm) for free gas-phase QTR 2+, within the 0.3 eV uncertainty associated with these calculations. This red shift of 0.26 eV is quite similar to the 0.24 eV red shift between the TD-DFT computational prediction for the lowest energy transition for QTR + (1.68 eV) and its value in a water matrix (1.44 eV). These results suggest that multiple photoionization of such large PAHs in water-ice can be an efficient process in general.     

On the performance of time-dependent density functional theory and polarizable continuum model in the study of aqueous formaldehyde

In this paper Time-Dependent Density Functional Theory (TD-DFT) with Becke's three-parameter hybrid method using the Lee–Yang–Parr correlation functional (B3LYP) in conjunction with different basis sets is applied to calculate the solvatochromic shift on the lowest singlet transition of formaldehyde in vacuum and in solution. Our results, in excellent agreement with solvent excitation energy shift of acetone in water at 298–300 K (no experimental data on formaldehyde in water are available so far) and with previous high level quantum chemical calculations, help in appreciating the potentialities of the combined DFT/PCM approach on aquo-complexes for the study of structural and spectroscopic properties of molecule in solution.     

Theoretical determination of the standard reduction potentials of pheophytin-a in N,N-dimethyl formamide and membrane

Quantum mechanical/molecular mechanics (QM/MM) calculations were performed on the neutral, anionic, and dianionic forms of Pheophytin-a (Pheo-a) in N,N-dimethyl formamide (DMF) in order to calculate the absolute free energy of reduction of Pheo-a in solution. The geometry of the solvated species was optimized by restricted open-shell density functional treatment (ROB3LYP) using the 6-31G(d) basis set for the molecular species while the primary solvent shell consisting of 45 DMF molecules was treated by the MM method using the universal force field (UFF). Electronic energies of the neutral, anionic, and dianionic species were obtained by carrying out single point density functional theory (DFT) calculations using the 6-311+G(2d,2p) basis set on the respective ONIOM optimized geometries. The CHARMM27 force field was used to account for the dynamical nature of the primary solvation shell of 45 DMF molecules. In the calculations using solvent shells, the required atomic charges for each solvent molecule were obtained from ROB3LYP/6-31G(d) calculation on a single isolated DMF molecule. Randomly sampled configurations generated by the Monte Carlo (MC) technique were used to determine the contribution of the primary shell to the free energy of solvation of the three species. The dynamical nature of the primary shell significantly corrects the free energy of solvation. Frequency calculations at the ROB3LYP/6-31G(d) level were carried out on the optimized geometries of truncated 47-atom models of the neutral and ionic species in vacuum so as to determine the differences in thermal energy and molecular entropy. The Born energy of ion-dielectric interaction, the Onsager energy of dipole-dielectric interaction, and the Debye-Hückel energy of ion-ionic cloud interaction for the pheophytin-solvent aggregate were added as perturbative corrections. The Born interaction also makes a large contribution to the absolute free energy of reduction. An implicit solvation model (DPCM) was also employed for the calculation of standard reduction potentials in DMF. Both the models were successful in reproducing the standard reduction potentials. An explicit solvent treatment(QM/MM/MC + Born + Onsager + Debye corrections) yielded the one electron reduction potential of Pheo-a as -0.92 +/- 0.27 V and the two electron reduction potential as -1.34 +/- 0.25 V at 298.15 K, while the implicit solvent treatment yielded the corresponding values as -1.03 +/- 0.17 and -1.30 +/- 0.17 V, respectively. The calculated values more or less agree with the experimental midpoint potentials of -0.90 and -1.25 V, respectively. Moreover, a numerical finite difference Poisson-Boltzmann solver (FDPB) along with the DPCM methodology was employed to obtain the reduction potential of pheophytin in the thylakoid membrane. The calculated reduction potential value of -0.58 V is in excellent agreement with the reported value -0.61 V.     

QM/MM calculation of solvent effects on absorption spectra of guanine

Electronic spectra of guanine in the gas phase and in water were studied by quantum mechanical/molecular mechanical (QM/MM) methods. Geometries for the excited‐state calculations were extracted from ground‐state molecular dynamics (MD) simulations using the self‐consistent‐charge density functional tight binding (SCC‐DFTB) method for the QM region and the TIP3P force field for the water environment. Theoretical absorption spectra were generated from excitation energies and oscillator strengths calculated for 50 to 500 MD snapshots of guanine in the gas phase (QM) and in solution (QM/MM). The excited‐state calculations used time‐dependent density functional theory (TDDFT) and the DFT‐based multireference configuration interaction (DFT/MRCI) method of Grimme and Waletzke, in combination with two basis sets. Our investigation covered keto‐N7H and keto‐N9H guanine, with particular focus on solvent effects in the low‐energy spectrum of the keto‐N9H tautomer. When compared with the vertical excitation energies of gas‐phase guanine at the optimized DFT (B3LYP/TZVP) geometry, the maxima in the computed solution spectra are shifted by several tenths of an eV. Three effects contribute: the use of SCC‐DFTB‐based rather than B3LYP‐based geometries in the MD snapshots (red shift of ca. 0.1 eV), explicit inclusion of nuclear motion through the MD snapshots (red shift of ca. 0.1 eV), and intrinsic solvent effects (differences in the absorption maxima in the computed gas‐phase and solution spectra, typically ca. 0.1–0.3 eV). A detailed analysis of the results indicates that the intrinsic solvent effects arise both from solvent‐induced structural changes and from electrostatic solute–solvent interactions, the latter being dominant. © 2009 Wiley Periodicals, Inc. J Comput Chem 2010     

On the performance of quantum chemical methods to predict solvatochromic effects: the case of acrolein in aqueous solution

The performance of the Hartree-Fock method and the three density functionals B3LYP, PBE0, and CAM-B3LYP is compared to results based on the coupled cluster singles and doubles model in predictions of the solvatochromic effects on the vertical n-->pi* and pi-->pi* electronic excitation energies of acrolein. All electronic structure methods employed the same solvent model, which is based on the combined quantum mechanics/molecular mechanics approach together with a dynamical averaging scheme. In addition to the predicted solvatochromic effects, we have also performed spectroscopic UV measurements of acrolein in vapor phase and aqueous solution. The gas-to-aqueous solution shift of the n-->pi* excitation energy is well reproduced by using all density functional methods considered. However, the B3LYP and PBE0 functionals completely fail to describe the pi-->pi* electronic transition in solution, whereas the recent CAM-B3LYP functional performs well also in this case. The pi-->pi* excitation energy of acrolein in water solution is found to be very dependent on intermolecular induction and nonelectrostatic interactions. The computed excitation energies of acrolein in vacuum and solution compare well to experimental data.     

Fluorescence spectra of organic dyes in solution: a time dependent multilevel approach

Classical all-atom molecular dynamics (MD) simulations and quantum mechanical (QM) time-dependent density functional theory (TD-DFT) calculations are employed to study the conformational and photophysical properties of the first emitter excited state of tetramethyl-rhodamine iso-thiocyanate fluorophore in aqueous solution. For this purpose, a specific and accurate force field has been parameterised from QM data to model the fluorophore's first bright excited state. During the MD simulations, the consequences of the π→π* electronic transition on the structure and microsolvation sphere of the dye has been analysed in some detail and compared to the ground state behaviour. Thereafter, fluorescence has been calculated at the TD-DFT level on configurations sampled from the simulated MD trajectories, allowing us to include time dependent solvent effects in the computed emission spectrum. The latter, when compared with the absorption spectrum, reproduces well the experimental Stokes shift, further validating the proposed multilevel computational procedure.     

Solvent effects on the UV-visible absorption spectrum of benzophenone in water: a combined Monte Carlo quantum mechanics study including solute polarization

The entire ultraviolet-visible absorption spectrum of benzophenone in water is studied and compared with the same spectrum in gas phase. Five transitions are considered, and the corresponding solvatochromic shifts are obtained and compared to experiment. Using a sequential procedure of Monte Carlo simulations and quantum mechanical calculations, liquid configurations were generated and an averaged spectrum of the solution was calculated. The solute polarization was included by an iterative procedure where the atomic charges of the solute were obtained as an average with the solvent distribution. The calculated average dipole moment of benzophenone in water, with MP26-31++G(d,p), converges to the value of 5.84+/-0.05 D, 88% larger than the gas-phase value of 3.11 D. Using 100 statistically uncorrelated configurations and solvation shells with 235 explicit water molecules selected by a minimum-distance distribution of solvent shells, instead of the usual radial distribution, the excitation energies were obtained from solute-solvent all-valence-electron INDO/CIS calculations. The shift of the weak n-pi(*) transition is obtained as 2045+/-40 cm(-1) and the strong and broad pi-pi(*) shift as -1790+/-30 cm(-1). These results are in good agreement with the experimental values of 2200 and -1600 cm(-1), respectively. Standard procedure used by common force fields to generate atomic charges to describe the electrostatic moments of the solute, with HF6-31G(d), gives a dipole moment of 3.64 D. Using these standard charges in the simulation, the average shifts are calculated as 1395+/-35 and -1220+/-25 cm(-1), both about 600 cm(-1) smaller in magnitude than those obtained with the average converged fully polarized solute. The influence of the solute polarization in the solute-solvent interaction and, in particular, in solute-solvent hydrogen bonds is analyzed.     

Using MD snapshots in ab initio and DFT calculations: OH vibrations in the first hydration shell around Li+(aq)

The average OH stretching vibrational frequency for the water molecules in the first hydration shell around a Li(+) ion in a dilute aqueous solution was calculated by a hybrid molecular dynamics + quantum-mechanical ("MD + QM") approach. Using geometry configurations from a series of snapshots from an MD simulation, the anharmonic, uncoupled OH stretching frequencies were calculated for 100 first-shell OH oscillators at the B3LYP and HF/6-31G(d,p) levels of theory, explicitly including the first shell and the relevant second shell water molecules into charge-embedded supermolecular QM calculations. Infrared intensity-weighting of the density-of-states (DOS) distributions by means of the squared dipole moment derivatives (which vary by a factor of 20 over the OH stretching frequency band at the B3LYP level), changes the downshift from approximately -205 to -275 cm(-1) at the B3LYP level. Explicit inclusion of relevant third-shell water molecules in the supermolecular cluster leads to a further downshift by approximately -30 cm(-1). Our final estimated average downshift is approximately -305 cm(-1). The experimental value lies somewhere in the range between -290 and -420 cm(-1). Also, the absolute nu(OH) frequency is well reproduced in our calculations. "In-liquid" instantaneous correlation curves between nu(OH) and various typical H-bond strength parameters such as R(O...O), R(H...O), the intramolecular OH bond length, and the IR intensity are presented. Some of these correlations are robust and persist also for the rather distorted instantaneous geometries in the liquid; others are less so.     

Comparison of polarizable continuum model and quantum mechanics/molecular mechanics solute electronic polarization: study of the optical and magnetic properties of diazines in water

A combination of the polarizable continuum model (PCM) and the hybrid quantum mechanics/molecular mechanics (QM/MM) methodology, PCM-MM/QM, is used to include the solute electronic polarization and then study the solvent effects on the low-lying n→π(?) excitation energy and the (15)N nuclear magnetic shielding of pyrazine and pyridazine in aqueous environment. The results obtained with PCM-MM/QM are compared with two other procedures, i.e., the conventional PCM and the iterative and sequential QM/MM (I-QM/MM). The QM calculations are made using density functional theory in the three procedures. For the excitation energies, the time-dependent B3LYP/6-311+G(d) model is used. For the magnetic shielding, the B3LYP/aug-pcS2(N)/pcS2(C,O,H) is used with the gauge-including atomic orbitals. In both cases, i.e., PCM-MM/QM and I-QM/MM, that use a discrete model of the solvent, the solute is surrounded by a first shell of explicit water molecules embedded by an electrostatic field of point charges for the outer shells. The best results are obtained including 28 explicit water molecules for the spectral calculations and 9 explicit water molecules for the magnetic shielding. Using the PCM-MM/QM methodology the results for the n→π(?) excitation energies of pyridazine and pyrazine are 32,070 ± 80 cm(-1) and 32,675 ± 60 cm(-1), respectively, in good agreement with the corresponding I-MM/QM results of 32,540 ± 80 cm(-1) and 32,710 ± 60 cm(-1) and the experimental results of 33,450-33,580 cm(-1) and 32,700-33,300 cm(-1). For the (15)N magnetic shielding, the corresponding numbers for the gas-water shifts obtained with PCM-MM/QM are 47.4 ± 1.3 ppm for pyridazine and 19.7 ± 1.1 ppm for pyrazine, compared with the I-QM/MM values of 53.4?±?1.3 ppm and 19.5 ± 1.2 ppm and the experimental results of 42-54 ppm and 17-22 ppm, respectively. The agreement between the two procedures is found to be very good and both are in agreement with the experimental values. PCM-MM/QM approach gives a good solute polarization and could be considered in obtaining reliable results within the expected QM/MM accuracy. With this electronic polarization, the solvent effects on the electronic absorption spectra and the (15)N magnetic shielding of the diazines in water are well described by using only an electrostatic approximation. Finally, it is remarked that the experimental and theoretical results suggest that the (15)N nuclear magnetic shielding of any diazine has a clear dependence with the solvent polarity but not directly with the solute-solvent hydrogen bonds.     

The merits of the frozen-density embedding scheme to model solvatochromic shifts

We investigate the usefulness of a frozen-density embedding scheme within density-functional theory [J. Phys. Chem. 97, 8050 (1993)] for the calculation of solvatochromic shifts. The frozen-density calculations, particularly of excitation energies have two clear advantages over the standard supermolecule calculations: (i) calculations for much larger systems are feasible, since the time-consuming time-dependent density functional theory (TDDFT) part is carried out in a limited molecular orbital space, while the effect of the surroundings is still included at a quantum mechanical level. This allows a large number of solvent molecules to be included and thus affords both specific and nonspecific solvent effects to be modeled. (ii) Only excitations of the system of interest, i.e., the selected embedded system, are calculated. This allows an easy analysis and interpretation of the results. In TDDFT calculations, it avoids unphysical results introduced by spurious mixings with the artificially too low charge-transfer excitations which are an artifact of the adiabatic local-density approximation or generalized gradient approximation exchange-correlation kernels currently used. The performance of the frozen-density embedding method is tested for the well-studied solvatochromic properties of the n-->pi(*) excitation of acetone. Further enhancement of the efficiency is studied by constructing approximate solvent densities, e.g., from a superposition of densities of individual solvent molecules. This is demonstrated for systems with up to 802 atoms. To obtain a realistic modeling of the absorption spectra of solvated molecules, including the effect of the solvent motions, we combine the embedding scheme with classical molecular dynamics (MD) and Car-Parrinello MD simulations to obtain snapshots of the solute and its solvent environment, for which then excitation energies are calculated. The frozen-density embedding yields estimated solvent shifts in the range of 0.20-0.26 eV, in good agreement with experimental values of between 0.19 and 0.21 eV.     

Cope elimination: elucidation of solvent effects from QM/MM simulations

The Cope elimination reactions for threo- and erythro-N,N-dimethyl-3-phenyl-2-butylamine oxide have been investigated using QM/MM calculations in water, THF, and DMSO. The aprotic solvents provide up to million-fold rate accelerations. The effects of solvation on the reactants, transition structures, and rates of reaction are elucidated here using two-dimensional potentials of mean force (PMF) derived from free-energy perturbation calculations in Monte Carlo simulations (MC/FEP). The resultant free energies of activation in solution are in close agreement with experiment. Ab initio calculations at the MP2/6-311+G-(2d,p) level using the PCM continuum solvent model were also carried out; however, only the QM/MM methodology was able to reproduce the large rate increases in proceeding from water to the dipolar aprotic solvents. Solute-solvent interaction energies and radial distribution functions are also analyzed and show that poorer solvation of the reactant in the aprotic solvents is primarily responsible for the observed rate enhancements. It is found that the amine oxide oxygen is the acceptor of three hydrogen bonds from water molecules for the reactant but only one to two weaker ones at the transition state. The overall quantitative success of the computations supports the present QM/MM/MC approach, featuring PDDG/PM3 as the QM method.     

An explicit quantum chemical method for modeling large solvation shells applied to aminocoumarin C151

The absorption spectra of aminocoumarin C151 in water and n-hexane solution are investigated by an explicit quantum chemical solvent model. We improved the efficiency of the frozen-density embedding scheme, as used in a former study on solvatochromism (J. Chem. Phys. 2005, 122, 094115) to describe very large solvent shells. The computer time used in this new implementation scales approximately linearly (with a low prefactor) with the number of solvent molecules. We test the ability of the frozen-density embedding to describe specific solvent effects due to hydrogen bonding for a small example system, as well as the convergence of the excitation energy with the number of solvent molecules considered in the solvation shell. Calculations with up to 500 water molecules (1500 atoms) in the solvent system are carried out. The absorption spectra are studied for C151 in aqueous or n-hexane solution for direct comparison with experimental data. To obtain snapshots of the dye molecule in solution, for which subsequent excitation energies are calculated, we use a classical molecular dynamics (MD) simulation with a force field adapted to first-principles calculations. In the calculation of solvatochromic shifts between solvents of different polarity, the vertical excitation energy obtained at the equilibrium structure of the isolated chromophore is sometimes taken as a guess for the excitation energy in a nonpolar solvent. Our results show that this is, in general, not an appropriate assumption. This is mainly due to the fact that the solute dynamics is neglected. The experimental shift between n-hexane and water as solvents is qualitatively reproduced, even by the simplest embedding approximation, and the results can be improved by a partial polarization of the frozen density. It is shown that the shift is mainly due to the electronic effect of the water molecules, and the structural effects are similar in n-hexane and water. By including water molecules, which might be directly involved in the excitation, in the embedded region, an agreement with experimental values within 0.05 eV is achieved.     

Theoretical determination of standard oxidation and reduction potentials of chlorophyll-a in acetonitrile

QM/MM calculations were performed on ethyl chlorophyllide-a and its radical cation and anion, by using the density functional (DF) B3LYP method to determine the molecular characteristics, and a molecular mechanics (MM) method to simulate the solvating medium. The presence of the solvent was accounted for during the optimization of the geometry of the 85-atom chlorophyll-a system by using an ONIOM methodology. A total of 24 solvent molecules were explicitly considered during the optimization process, and these were treated by the universal force field (UFF) method. Initially, the split-valence 3-21G basis set was used for optimizing the geometry of the 85-atom species, neutral, cation and anion. Electronic energies were then determined for the optimized species by making use of the polarized 6-31G(d) basis set. The ionization energy calculated (6.0 eV) is in very good agreement with the observed one (6.1 eV). The MM+ force field was used to investigate the dynamics of the acetonitrile molecules around the neutral species as well as the radical ions of chlorophyll. The required atomic charges on all the atoms were obtained from calculations on all involved molecules at the DFT/6-31G(d) level. Randomly sampled configurations were used to determine the first solvation layer contribution to the free energy of solvation of various species. A truncated 46-atom model of ethyl chlorophyllide-a was used to evaluate the thermal energies of neutral chlorophyll molecule relative to its two radical ions in the gas phase. Born energy, Onsager energy, and the Debye-Huckel energy of the chlorophyll-solvent aggregate were added as perturbative corrections to the free energy of solvation that was initially obtained through molecular dynamics method for the same complex. These calculations yield the oxidation potential as 0.75 +/- 0.32 V and the reduction potential -1.18 +/- 0.31 V at 298.15 K. The calculated values are in good agreement with the experimental midpoint potentials of +0.76 and -1.04 V, respectively.     

Probing the transition from hydrophilic to hydrophobic solvation with atomic scale resolution

Picosecond and femtosecond X-ray absorption spectroscopy is used to probe the changes of the solvent shell structure upon electron abstraction of aqueous iodide using an ultrashort laser pulse. The transient L(1,3) edge EXAFS at 50 ps time delay points to the formation of an expanded water cavity around the iodine atom, in good agreement with classical and quantum mechanical/molecular mechanics (QM/MM) molecular dynamics (MD) simulations. These also show that while the hydrogen atoms pointed toward iodide, they predominantly point toward the bulk solvent in the case of iodine, suggesting a hydrophobic behavior. This is further confirmed by quantum chemical (QC) calculations of I(-)/I(0)(H(2)O)(n=1-4) clusters. The L(1) edge sub-picosecond spectra point to the existence of a transient species that is not present at 50 ps. The QC calculations and the QM/MM MD simulations identify this transient species as an I(0)(OH(2)) complex inside the cavity. The simulations show that upon electron abstraction most of the water molecules move away from iodine, while one comes closer to form the complex that lives for 3-4 ps. This time is governed by the reorganization of the main solvation shell, basically the time it takes for the water molecules to reform an H-bond network. Only then is the interaction with the solvation shell strong enough to pull the water molecule of the complex toward the bulk solvent. Overall, much of the behavior at early times is determined by the reorientational dynamics of water molecules and the formation of a complete network of hydrogen bonded molecules in the first solvation shell.     

Novel quantum mechanical/molecular mechanical method combined with the theory of energy representation: free energy calculation for the Beckmann rearrangement promoted by proton transfers in the supercritical water

The Beckmann rearrangement of acetone oxime promoted by proton transfers in the supercritical water has been investigated by means of the hybrid quantum mechanical/molecular mechanical approach combined with the theory of energy representation (QM/MM-ER) recently developed. The transition state (TS) structures have been explored by ab initio calculations for the reaction of hydrated acetone oxime on the assumption that the reaction is catalyzed by proton transfers along the hydrogen bonds connecting the solute and the solvent water molecules. Up to two water molecules have been considered as reactants that take part in the proton transfers. As a result of the density functional theory calculations with B3LYP functional and aug-cc-pVDZ basis set, it has been found that participation of two water molecules in the reaction reduces the activation free energy by -12.3 kcal/mol. Furthermore, the QM/MM-ER simulations have revealed that the TS is more stabilized than the reactant state in the supercritical water by 2.7 kcal/mol when two water molecules are involved in the reaction. Solvation free energies of the reactant and the TS have been decomposed into terms due to the electronic polarization of the solute, electron density fluctuation, and others to elucidate the origin of the stabilization of the TS as compared with the reactant. It has been revealed that the promotion of the chemical reaction due to the hydration mainly originates from the interaction between the nonpolarized solute and the solvent water molecules at the supercritical state.     

The isotropic nuclear magnetic shielding constants of acetone in supercritical water: a sequential Monte Carlo/quantum mechanics study including solute polarization

The nuclear isotropic shielding constants sigma((17)O) and sigma((13)C) of the carbonyl bond of acetone in water at supercritical (P=340.2 atm and T=673 K) and normal water conditions have been studied theoretically using Monte Carlo simulation and quantum mechanics calculations based on the B3LYP6-311++G(2d,2p) method. Statistically uncorrelated configurations have been obtained from Monte Carlo simulations with unpolarized and in-solution polarized solute. The results show that solvent effects on the shielding constants have a significant contribution of the electrostatic interactions and that quantitative estimates for solvent shifts of shielding constants can be obtained modeling the water molecules by point charges (electrostatic embedding). In supercritical water, there is a decrease in the magnitude of sigma((13)C) but a sizable increase in the magnitude of sigma((17)O) when compared with the results obtained in normal water. It is found that the influence of the solute polarization is mild in the supercritical regime but it is particularly important for sigma((17)O) in normal water and its shielding effect reflects the increase in the average number of hydrogen bonds between acetone and water. Changing the solvent environment from normal to supercritical water condition, the B3LYP6-311++G(2d,2p) calculations on the statistically uncorrelated configurations sampled from the Monte Carlo simulation give a (13)C chemical shift of 11.7+/-0.6 ppm for polarized acetone in good agreement with the experimentally inferred result of 9-11 ppm.     

Investigation of solvent effects for the Claisen rearrangement of chorismate to prephenate: mechanistic interpretation via near attack conformations

Solvent effects on the rate of the Claisen rearrangement of chorismate to prephenate have been examined in water and methanol. The preequilibrium free-energy differences between diaxial and diequatorial conformers of chorismate, which had previously been implicated as the sole basis for the observed 100-fold rate increase in water over methanol, have been reframed using the near attack conformation (NAC) concept of Bruice and co-workers. Using a combined QM/MM Monte Carlo/free-energy perturbation (MC/FEP) method, 82%, 57%, and 1% of chorismate conformers were found to be NAC structures (NACs) in water, methanol, and the gas phase, respectively. As a consequence, the conversion of non-NACs to NACs provides no free-energy contributions to the overall relative reaction rates in water versus methanol. Free-energy perturbation calculations yielded differences in free energies of activation for the two polar protic solvents and the gas phase. The rate enhancement in water over the gas phase arises from preferential hydration of the transition state (TS) relative to the reactants via increased hydrogen bonding and long-range electrostatic interactions, which accompany bringing the two negatively charged carboxylates into closer proximity. More specifically, there is an increase of 1.3 and 0.6 hydrogen bonds to the carboxylate groups and the ether oxygen, respectively, in going from the reactant to the TS in water. In methanol, the corresponding changes in hydrogen bonding with first shell solvent molecules are small; the rate enhancement arises primarily from the enhanced long-range interactions with solvent molecules. Thus, the reaction occurs faster in water than in methanol due to greater stabilization of the TS in water by specific interactions with first shell solvent molecules.