ZnS/CdS/ZnS quantum dot quantum well produced in inverted micelles

A ZnS/CdS/ZnS quantum dot quantum well was prepared in AOT micelles successfully and was characterized by absorption spectroscopy and fluorescence spectroscopy. Luminescence in the region of 350-600 nm was observed. The complete ZnS shell might reduce the number of defects on the surface of the CdS well, which were assumed to act as centers for radiationless recombination, resulting in the luminescence enhancement.     

Effect of layer thickness on the luminescence properties of ZnS/CdS/ZnS quantum dot quantum well

ZnS/CdS/ZnS quantum dot quantum well was prepared. The optical properties of ZnS/CdS/ZnS QDQW with different thickness of CdS well and ZnS shell were studied. Absorption spectra, emission spectra, and luminescence lifetimes were measured. The observed luminescence was assigned to the bulk donor-acceptor pair recombination of CdS and can be enhanced by increasing the thickness of the CdS well or coating an appropriate thickness of ZnS shell on the surface of the CdS well. The luminescence enhancement was caused by the relative reduce in the surface effect. The luminescence lifetimes were influenced strongly by the surface state.     

Improved GFP gene transfection mediated by polyamidoamine dendrimer-functionalized multi-walled carbon nanotubes with high biocompatibility

The multi-walled carbon nanotubes (MWCNTs)-polyamidoamine (PAMAM) hybrid was prepared by covalent linkage approach, and characterized by transmission electron microscopy, Fourier transform infrared spectroscopy and ultraviolet-visible spectrometry. The PAMAM dendrimers were present on the surface of MWCNTs in high density, and the MWCNT-PAMAM hybrid exhibited good dispersibility and stability in aqueous solution. The interaction between MWCNT-PAMAM with plasmid DNA of enhanced green fluorescence protein (pEGFP-N1), intracellular trafficking of the hybrid, transfection performance and cytotoxicity to HeLa cells were evaluated in detail. We found that the MWCNT-PAMAM hybrid possessed good pEGFP-N1 immobilization ability and could efficiently delivery GFP gene into cultured HeLa cells. The surface modification of MWCNTs with PAMAM improved the transfection efficiency 2.4 and 0.9 times, and simultaneously decreased cytotoxicity by about 38%, as compared with mixed acid-treated MWCNTs and pure PAMAM dendrimers. The MWCNT-PAMAM hybrid can be considered as a new carrier for the delivery of biomolecules into mammalian cells. Therefore, this novel system may have good potential applications in biology and therapy, including gene delivery systems.     

Controllable synthesis of ZnS/PMMA nanocomposite hybrids generated from functionalized ZnS quantum dots nanocrystals

We reported controllable synthesis of ZnS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of zinc chloride (ZnCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand were well dispersed in H₂O/dimethylformamide solution without any aggregation. In addition, the Mn-doped ZnS nanocrystals (NCs) were synthesized with similar method. Then, ZnS-PMMA hybrids were obtained via free radical polymerization in situ by using ZnS NCs functionalized with methacryloxypropyltrimethoxysilane (MPS). FT-IR characterization indicates the formation of robust bonding between ZnS NCs and the organic ligand. The TEM images show that ZnS NCs are well dispersed in PMMA matrix, and particle size of as-prepared ZnS NCs is about 2.6 nm, in agreement with the computing results of Brus’s model and Debye–Scherrer formula. The photoluminescence measurements present that ZnS NCs, Mn-doped ZnS NCs, and ZnS/PMMA hybrid show good optical properties.     

Construction of CdSe/ZnS quantum dot microarray in a microfluidic chip

Microarray technology has been proved to be greatly helpful for biomedical and biological diagnosis. And the evaluation of its biological applications lies in the detection sensitivity, which requires high intensity and stability of the signal. Recently, several nanomaterials, especially semiconductor nanomaterials, due to their excellent fluorescence properties, have been widely used to construct microarrays for biosensors. Here, we presented an approach for constructing CdSe/ZnS quantum dot (QD) microarray in microfluidic channels on a glass slide by photolithography. The conditions for immobilizing stable and uniform QD microarray on the glass slide were optimized. Several types of QD microarrays with different emission wavelengths and modified groups were constructed using silanization and lithography technology. Based on the fluorescence quenching effect of Cu2+ on QDs, the microfluidic chip with QD microarray was applied for the determination of Cu2+. 1 nmol/L Cu2+ could be detected by this method.     

CdSe/ZnS quantum dots based fluorescence quenching method for determination of paeonol

Aqueous polymethylmethacrylate (PMMA)-capped CdSe/ZnS quantum dots were used as fluorescence probes for paeonol determination. Based on the fluorescence quenching of aqueous CdSe/ZnS quantum dots caused by paeonol, a simple, sensitive and rapid method was developed. Under the optimal conditions, with excitation and emission wavelengths at 350 nm and 620 nm, respectively, the calibration plot of F0-F with concentration of paeonol was linear in the range of 25.04-175.2 mg L(-1) with correlation coefficient of 0.9986. The limit of detection was 0.017 mg L(-1). The concentration of paeonol in paeonol ointment was determined by the proposed method and the result agreed with the claimed value. Furthermore, the possible fluorescence quenching mechanism was discussed.     

The electrolyte switchable solubility of multi-walled carbon nanotube/ionic liquid (MWCNT/IL) hybrids

In this communication we report the first preparation of ionic liquid-modified carbon nanotubes with reversibly switchable solubility between aqueous and organic solvents, induced by anion exchange.     

Tunable polarised fluorescence of quantum dot doped nematic liquid crystals

The concentration, excitation photon wavelength, and polarisation dependent fluorescence of quantum dot (QD)–liquid crystal (LC) mixtures has been studied at room temperature using high-resolution, steady-state fluorescence spectroscopy. The fluorescence of QD–LC mixture increases with increasing QD’s concentration but the spectral red shift of ~10 nm relative to the stock QD–Toluene solution remains independent of concentration. In vertical switching (VS) cells, an external electric field changes the LC alignment direction and enhances the apparent fluorescence intensity. The apparent fluorescence anisotropy compared to that at zero applied electric field monotonically increases up to ~27% at an applied electric field of 0.6 V/µm. These results are consistent with the formation of disc-like assemblages of QDs oriented on planes perpendicular to the director of the nematic liquid crystal (NLC). These findings have important utility in polarisation sensitive photonic devices.     

Oscillating fluorescence in an unstable colloidal dispersion of CdSe/ZnS core/shell quantum dots

Fluorescence oscillation is observed in an ensemble of colloidal CdSe/ZnS core/shell quantum dots (QDs) dispersed in nonpolar solvent under continuous irradiation. The QDs dispersed in toluene gradually aggregate and change their fluorescence intensity, even in the dark. During the aggregation, the QD/toluene suspension is unstable, that is, overdispersed. The fluorescence oscillation is found only in this unstable state before the system reaches steady state. In addition, the aggregation rate is promoted by irradiation and strongly correlates with the oscillation amplitude. Our experimental results indicate that the dispersion instability plays an important role in both linear and nonlinear dynamics of the fluorescence. It is inferred from the experimental results and previous studies that the complex time evolution of fluorescence in the QD/toluene dispersion is possibly due to adsorption and desorption of surface ligand molecules over the course of QD aggregation.     

Synchrotron X-ray 2D and 3D elemental imaging of CdSe/ZnS quantum dot nanoparticles in Daphnia magna

The potential toxicity of nanoparticles to aquatic organisms is of interest given that increased commercialization will inevitably lead to some instances of inadvertent environmental exposures. Cadmium selenide quantum dots (QDs) capped with zinc sulfide are used in the semiconductor industry and in cellular imaging. Their small size (<10 nm) suggests that they may be readily assimilated by exposed organisms. We exposed Daphnia magna to both red and green QDs and used synchrotron X-ray fluorescence to study the distribution of Zn and Se in the organism over a time period of 36 h. The QDs appeared to be confined to the gut, and there was no evidence of further assimilation into the organism. Zinc and Se fluorescence signals were highly correlated, suggesting that the QDs had not dissolved to any extent. There was no apparent difference between red or green QDs, i.e., there was no effect of QD size. 3D tomography confirmed that the QDs were exclusively in the gut area of the organism. It is possible that the QDs aggregated and were therefore too large to cross the gut wall.     

Strong polyelectrolyte quantum dot surface for stable bioconjugation and layer-by-layer assembly applications

A series of quantum dot (QD) ligands are reported that can make strong polyelectrolyte QD surfaces with sulfonates or quaternary ammoniums, which can endow QDs with excellent colloidal stability independent of the pH and ionic strength, minimal hydrodynamic size, and can be exploited to achieve stable and flexible bioconjugations and layer-by-layer assembly.     

碳量子点/壳聚糖复合物的制备及用于槲皮素检测

以柠檬酸三钠、11-氨基十一烷、聚乙二醇400为碳源,利用微波法制备了碳量子点,将其与壳聚糖反应,制备出碳量子点/壳聚糖复合物。采用荧光、紫外、红外光谱等对碳量子点和碳量子点/壳聚糖复合物进行表征,探究了温度、时间、缓冲溶液及pH对体系荧光强度的影响。在pH 7.6的硼酸—硼砂缓冲介质中,槲皮素可使碳量子点/壳聚糖复合物发生荧光猝灭,其猝灭程度与槲皮素浓度呈良好的线性关系,据此建立了碳量子点/壳聚糖荧光猝灭法测定槲皮素的新方法,方法线性范围为4~40μmol/L,相关系数为0.9940,检出限为0.5μmol/L。方法已应用于测定本地甜瓜中槲皮素的含量。     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

Controlled synthesis of ZnS quantum dots and ZnS quantum flakes with graphene as a template

Novel ZnS quantum dots (QDs) and ZnS quantum flakes (QFs) were successfully prepared with graphene nanosheets (GNs) as a special template, and two unique heterostructures of ZnS/GNs were also obtained. Due to the structure-directing template effect of GNs, the as-synthesized ZnS with different morphologies, dots or flakes, were uniformly distributed on the surface of GNs by controlling nucleation and growth. The two different heterostructures of ZnS/GNs exhibited obvious photovoltaic response, and ZnS/GN QFs-on-sheet heterostructures show higher photovoltage than that of ZnS/GN QDs-on-sheet.     

ZnO-离子液体功能化的石墨烯量子点的制备及荧光性能

利用水热法制备了ZnO-1-丙胺基-3-甲基咪唑氯离子液体功能化的石墨烯量子点溶液,通过紫外-可见吸收光谱、红外吸收光谱和透射电镜对其进行了表征.通过研究各种因素对ZnO-离子液体功能化的石墨烯量子点的荧光发射光谱的影响,发现Cr₂O₇^2-对ZnO-离子液体功能化的石墨烯量子点有荧光猝灭现象.实验结果表明,在优化的实验条件下,pH=5.0,Cr(Ⅵ)浓度为1.0×10^-7～1.6×10^-6 mol·L^-1时,Cr(Ⅵ)对ZnO-离子液体功能化的石墨烯量子点的荧光猝灭呈线性,其线性方程为F/F₀=0.969 5-0.008 4c,R=0.998 8,检出限为7.6×10^-2μmol·L^-1.     

Characterization of Pd/TiO2 embedded in multi-walled carbon nanotube catalyst with a high photocatalytic activity

Pd particles loading on TiO₂-embedded multi-walled carbon nanotubes (MWCNTs), MWCNTs, and TiO₂ particles were prepared via an impregnation method with palladium(II) chlorate solution followed by heat treatment at high temperature. To characterize the catalysts, BET surface area, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive X-ray, Fourier transform infrared spectroscopy and ultraviolet-visible spectroscopy were employed. The prepared catalysts were tested in degradation of methyl orange under visible light. Pd/TiO₂-MWCNTs catalyst demonstrates the highest photocatalytic activity, and the phase transformation from PdO to Pd0 phase takes place at heat treatment of embedded TiO₂. The nanoparticles size of TiO₂ can be decreased by introduction of MWCNTs species. Combining structural characterization with kinetic study results we could conclude that the superior catalytic performance could arise due to the Pd/TiO₂-MWCNTs catalyst’s structure.     

Uncovering the role of the ZnS treatment in the performance of quantum dot sensitized solar cells

Among the third-generation photovoltaic devices, much attention is being paid to the so-called Quantum Dot sensitized Solar Cells (QDSCs). The currently poor performance of QDSCs seems to be efficiently patched by the ZnS treatment, increasing the output parameters of the devices, albeit its function remains rather unclear. Here new insights into the role of the ZnS layer on the QDSC performance are provided, revealing simultaneously the most active recombination pathways. Optical and AFM characterization confirms that the ZnS deposit covers, at least partially, both the TiO(2) nanoparticles and the QDs (CdSe). Photoanodes submitted to the ZnS treatment before and/or after the introduction of colloidal CdSe QDs were studied by electrochemical impedance spectroscopy, cyclic voltammetry and photocurrent experiments. The corresponding results prove that the passivation of the CdSe QDs rather than the blockage of the TiO(2) surface is the main factor leading to the efficiency improvement. In addition, a study of the ultrafast carrier dynamics by means of the Lens-Free Heterodyne Detection Transient Grating technique indicates that the ZnS shell also increases the rate of electron transfer. The dual role of the ZnS layer should be kept in mind in the quest for new modifiers for enhancing the performance of QDSCs.     

Preparation of polypyrrole/multi-walled carbon nanotube hybrids by electropolymerization combined with a coating method for counter electrodes in dye-sensitized solar cells

In this work, multi-wall carbon nanotubes coated with polypyrrole (PPy/MWCNT) have been used as counter electrode (CE) materials for dye-sensitized solar cells (DSSCs). PPy was deposited onto fluorine-doped tin-oxide-coated glass by electrochemical polymerization of pyrrole. Three surfactants were used in the preparation of the hybrids: cationic cetyltrimethylammonium bromide, anionic sodium dodecylbenzenesulfonate (DBSNa), and non-ionic polyoxyethylene sorbitan monolaurate (Tween20). The morphologies of the PPy and PPy/MWCNT hybrids were investigated using scanning electron spectroscopy. Chemical composition of the prepared CEs was determined by X-ray photoelectron spectroscopy and Fourier-transformed infrared spectroscopy. The catalytic activity of the PPy and PPy/MWCNT layers was evaluated using cyclic voltammetry, and the photovoltaic properties of DSSCs with PPy and PPy/MWCNT CEs were characterized using I–V measurements. PPy/MWCNT samples that were prepared by electrochemical polymerization showed the best results when the anionic surfactant DBSNa was used during polymerization. The photoelectric conversion efficiency of PPy/MWCNT prepared by electrochemical polymerization was 2.9%, which was 59% of that of Pt CE (4.9%).