Hydrolysis constants of Al3+, Ga3+, and In3+ ions in 0.1 M KNO3 solution

The hydrolysis constants of Al³⁺, Ga³⁺, and In³⁺ cations are determined by potentiometric titration at 25°C against the background of 0.1 M KNO₃.     

Different Complexation of Nd3+ and Sm3+ with L-Malic Acid

Complexation of Nd³⁺ and Sm³⁺ ions with L-malic acid (H₃Mal) in aqueous solutions (I = 0.1 mol/l KCl) was studied by pH-metric titration at the molar concentration ratios of H₃Mal : lanthanide equal to 1 : 2, 1 : 1, 2 : 1 in the pH range 2.8–9.5. Mathematical modeling of composite equilibrium processes was used to determine the compositions and stability constants of Nd(III) and Sm(III) L-malate complexes. It was found that in addition to the 1 : 1 and 1 : 2 complexes with different degree of deprotonation, the protonated L-malate complexes and hydroxo complexes of these metals were also formed. The Sm³⁺ and Nd³⁺ ions were established to behave differently during complexation with H₃Mal.     

Equilibrium models of Cr3+ and Cu2+ with glutamate

Speciation diagrams and stability constants for glutamate (Glu) with (Cr³⁺) and (Cu²⁺) in aqueous solutions are presented. The current study covers a larger pH-range affording accurate results, and reveal a different set of species for Cu²⁺ and species not previously reported for Cr³⁺. For the Cu²⁺ Glu system, the most successful model that refined the potentiometric data contains the simple one-to-one complex, the bis-complex and the mono-hydroxo complex. The overall stability constants for Cu²⁺–Glu complexes have respective values of log β₁₁₀ = 7.6 ± 0.2, log β_11-1 = 1.3 ± 0.7, log β₁₂₀ = 13.6 ± 0.2. Attempts to refine the stability constant for the mono-protonated metal complex (log β₁₁₁) that was reported in the literature indicated that this mono-protonated species did not form to an appreciable amount to be important for the model presented here. For the Cr³⁺ Glu system, the overall stability constants for the complexes formed have the values of log β₁₁₀ = 8.34 ± 0.03, log β_11-1 = 1.9 ± 0.1 and log β_11-2 = ?4.6 ± 0.1. These results for Cr³⁺ system covers wider pH-range and have more accuracy than those reported previously. The NMR experiments for Glu revealed downfield shifts of all protons as pH values decrease from 11.21 to 2.85.     

Mass-selected molecular ion spectra: (1+1)-Photodissociation spectroscopy of CH3I+ and CD3I+

The first well resolved (1+1)-photodissociation spectra of molecular ions are presented. By separating the spectroscopic step (first photon) and the dissociation step (second photon) we could extend the accessible spectral region of CH₃I⁺ and CD₃I⁺ considerably. The ions are prepared in the vibrationless ground state by MPI in a supersonic molecular beam. A new detection technique is presented with high discrimination between wanted and unwanted ionic species. Furthermore, another new technique for unimolecular decay measurements delivers useful information for the assignment of the ion spectra. We found an improved assignment for CH₃I⁺ and CD₃I⁺ with consequences for molecular constants.     

Effects of Different Solvent Characteristics on the Proton-Ligand and Ni2+-, Sm3+-, AND Yb3+- Ligand Formation Constants of 5,5-Dimethyl-Cyclohexane-2-(2-Hydroxyphenyl)Hydrazono- 1,3-Dione (DCPHD) in Various Mixed Aqueous Solvents-(II)

Complex equilibria of DCPHD with proton and Ni²⁺, Sm³⁺, and Yb³⁺ ions has been measured in various mixed aqueous solvents, viz: isopropanol-water, acetone-water, ethanol-water, and methanol-water. Based on potentiometric equilibrium measurements of hydrogen ion concentration at 30°C, ionic strenght 0.10 M (KNO₃) and in the above various mixed aqueous solvents, the values of the protonation constants of DCPHD and the stability constants of DCPHD with Ni²⁺, Sm³⁺, and Yb³⁺ have been evaluated. The variation of protonation and stability constants with the inverse of dielectric constant or mole fraction of the solvent was studied. Application of Fuoss expression and consideration of electrosatic and non-electrostatic effects are made to explain the values of the constants.     

Tunable luminescence and energy transfer process between Tb3+ and Eu3+ in GYAG:Bi3+, Tb3+, Eu3+ phosphors

A series of Eu³⁺ ions co-doped (Gd_0.9Y_0.1)₃Al₅O₁₂:Bi³⁺, Tb³⁺ (GYAG) phosphors have been synthesized by means of solvothermal reaction method. The XRD pattern of GYAG phosphor sintered at 1500 °C confirms their garnet phase. The luminescence properties of these phosphors have been explored by analyzing their excitation and emission spectra along with their decay curves. The excitation spectra of the GYAG:Bi³⁺, Tb³⁺, Eu³⁺ phosphors consists of broad bands in the shorter wavelength region due to 4f⁸ → 4f⁷5d¹ transition of Tb³⁺ ions overlapped with 6s² → 6s¹6p¹ (¹S₀ → ³P₁) transition of Bi³⁺ ions and the charge transfer band of Eu³⁺–O^2?. The present phosphors exhibit green and red colors due to ⁵D₄ → ⁷F₅ transition of Tb³⁺ ions and ⁵D₀ → ⁷F₁ transition of Eu³⁺ ions, respectively. The emission was shifted from green to red color by co-doping with Eu³⁺ ions, which indicate that the energy transfer probability from Tb³⁺ to Eu³⁺ ions are dependent strongly on the concentration of Eu³⁺ ions.     

Complexation of Eu3+ and Am3+ with soil humic acid extracted from Okchon Basin of Korean Peninsula

The complexation of Eu³⁺ and Am³⁺ ions with the humic acids has been investigated at various pH (4.0, 4.5, 5.0, 5.4) in 0.1M NaClO₄ solution using solvent extraction technique. Two humic acids are used in this study: humic acid extracted from the soil of Taejon on the Okchon Basin of Korea (TJHA) and commercially available one from Aldrich Chemical Co. (AHA). The total carboxylate group concentrations were determined to be 3.58 meq/g and 4.59 meq/g for Taejon and Aldrich humic acids, respectively. The conditional stability constants (log ₁ and log ₂), dependent on the pH of the solution, of the complexes of Eu³⁺ and Am³⁺ ions with the humic acids have been determined at the ionic medium of 0.1M NaClO₄. The values of stability constants with the degree of ionization of TJHA for Eu and Am complexes are quite well agreed with those of Lake Bradford humic acid (LBHA), indicating that structural characteristics of TJHA and LBHA may be quite similar to one another.     

Bi3+-Er3+ and Bi3+-Yb3+ Codoped Cs2AgInCl6 Double Perovskite Near-Infrared Emitters

Bi³⁺ and lanthanide ions have been codoped in metal oxides as optical sensitizers and emitters. But such codoping is not known in typical semiconductors such as Si, GaAs, and CdSe. Metal halide perovskite with coordination number 6 provides an opportunity to codope Bi³⁺ and lanthanide ions. Codoping of Bi³⁺ and Ln³⁺ (Ln=Er and Yb) in Cs₂AgInCl₆ double perovskite is presented. Bi³⁺-Er³⁺ codoped Cs₂AgInCl₆ shows Er³⁺ f-electron emission at 1540 nm (suitable for low-loss optical communication). Bi³⁺ codoping decreases the excitation (absorption) energy, such that the samples can be excited with ca. 370 nm light. At that excitation, Bi³⁺-Er³⁺ codoped Cs₂AgInCl₆ shows ca. 45 times higher emission intensity compared to the Er³⁺ doped Cs₂AgInCl₆. Similar results are also observed in Bi³⁺-Yb³⁺ codoped sample emitting at 994 nm. A combination of temperature-dependent (5.7 K to 423 K) photoluminescence and calculations is used to understand the optical sensitization and emission processes.     

Ion pair association of complexes of La3+ and Nd3+ with Br− and NO3− in N,N-dimethylacetamide

The formation constants and the respective variations of enthalpy were obtained by means of calorimetric titration of the lanthanides La³⁺ and Nd³⁺ with bromide and nitrate in N,N-dimethylacetamide. These thermochemical data were calculated for the 1:1 and 1:2 species which are less stable than the corresponding species obtained with chloride. The order of stability Cl^? > Br^?>NO₃^? was established for both species of La³⁺, and the order Br^?>Cl^?>LNO₃^? for 1:1 species of Nd³⁺. NdCl₂⁺ and NdBr₂⁺ species were not detected. Our results support the view that the metal-anion interactions involve inner sphere species.     

Hydrolytic Behavior of La<Superscript>3+</Superscript> and Sm<Superscript>3+</Superscript> at Various Temperatures

The hydrolytic species of lanthanide ions, La³⁺ and Sm³⁺, in water at I = 0.1 mol·dm^?3 KCl ionic strength and temperatures of 298.15, 310.15 and 318.15 K were investigated by potentiometry. The hydrolytic species were modeled by the HySS simulation program. From the results, the hydrolytic species of each metal ion at different temperatures were calculated using the program HYPERQUAD2013. The hydrolysis constants (log₁₀ β) of [La(OH)]²⁺ and La(OH)₃ were calculated as ?8.52 ± 0.46, ?26.84 ± 0.48, and log₁₀ β values of [Sm(OH)]²⁺, [Sm(OH)₂]⁺, Sm(OH)₃ were calculated as ?7.11 ± 0.21, ?15.84 ± 0.25 and ?23.44 ± 0.52 in aqueous media at 298.15 K, respectively. The dependence of the hydrolysis constants on the temperature allowed us to calculate the enthalpy, entropy, and Gibbs energy of hydrolysis values of each species.     

Kinetics of the reactions OH (v = O) + NH3 →; H2O + NH2 and OH(v = O) + O3 → HO2 + O2 AT 298°K

The rate constants for the reactions OH(X₂Π, ν = O) + NH₃ → ^k1 H₂O + NH₂ and OH(X²Π, ν = O) + O₃^k2 → HO₂ + O₂ were measured at 298°K by the flash photolysis resonance fluorescence technique. The values of the rate constants thus obtained are K₁ = (4.1 ± 0.6) × 10^?14 and k₂ = (6.5 ± 1.0) × 10^?14 in units of cm³ molecule ^?1 sec¹. The results are discussed in terms of understanding the dynamics of the perturbed stratosphere.     

Thermal and state-selected rate constant calculations for O(3p) + H2 → OH + H and isotopic analogs

We present a new parametrization (based on ab initio calculations) of the bending potentials for the two lowest potential energy surfaces of the reaction O(³P) + H₂, and we use it for rate constant calculations by variational transition-state theory with multidimensional semiclassical tunneling corrections. We present results for the temperature range 250–2400 K for both the rate constants and the intermolecular kinetic isotope effects for the reactions of O(³P) with D₂ and HD. In general, the calculated rate constants for the thermal reactions are in excellent agreement with available experiments. We also calculate the enhancement effect for exciting H₂ to the first excited vibrational state. The calculations also provide information on which aspects of the potential energy surfaces are important for determining the predicted rate constants.     

Determinations of the rate constants of the reactions Cl + N3Cl and N3 + NO at 295 K

The kinetics of reactions involving the ground-state azide radical, N₃ (X²Π_g, have been investigated in a discharge-flow system using mass spectrometric detection with molecular-beam sampling. The following rate constants have been determined at 295 K: Cl + N₃Cl → Cl₂ + N₃,k₂₉₅ = (1.78 ± 0.26) × 10^?12 cm³ s^?1 (1σ): N₃ + NO → N₂O + N₂, k₂₉₅ = (1.19 ± 0.31) × 10.^?12 cm³ s^?1 (1σ). A method for determining absolute N₃ radical concentration is reported.     

Reaction‐path dynamics and theoretical rate constants for the reaction CH4 + O3 → HOOO + CH3

We present a direct ab initio dynamics study of thermal rate constants of the hydrogen abstraction reaction of CH₄ + O₃ → HOOO +CH₃. The geometries of all the stationary points are optimized at MPW1K/6‐31+G(d,p), MPWB1K/6‐31+G(d,p), and BHandHLYP/6‐31+G(d,p) levels of theory. The energies are refined at a multi‐high‐level method. The extended Arrhenius expression fitted from the CVT/SCT and μVT/Eckart rate constants of ozonolysis of methane in the temperature range 200–2500 K are k^CVT/SCT(T) = 5.96 × 10^?29T^4.49e^(?17321.3/T) and k^μVT/Eckart(T) = 7.92 × 10^?29T^4.46e^(?17301.7/T), respectively. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Eu3+ concentration dependent optical properties and energy transfer from host Gd3+ to Eu3+ in GdF3 nanocrystals

By using a hydrothermal method, a series of Eu³⁺ concentration dependent GdF₃ nanocrystals have been synthesized. The crystalline structures of samples are characterized by XRD patterns, the morphology and size of the samples are illustrated by FE-SEM images, and the optical properties of the samples are presented by PL excitation and emission spectra. The energy transfer from host Gd³⁺ to Eu³⁺ is observed in the Eu³⁺ doped GdF₃ nanocrystals. The optical properties of Eu³⁺ and the energy transfer efficiency from host Gd³⁺ to Eu³⁺ are discussed on the basis of the Eu³⁺ concentration dependent integrated PL excitation and emission spectra of Gd³⁺ and Eu³⁺. The discussion on optical properties of Eu³⁺ and the energy transfer from Gd³⁺ to Eu³⁺ is meaningful to design and synthesize Gd³⁺ based compounds.     

Luminescence properties of Dy3+ or/and Sm3+ doped LiLa(WO4)2 phosphors and energy transfer from Dy3+ to Sm3+

The Dy³⁺ or/and Sm³⁺ doped LiLa(WO₄)₂ phosphors are synthesized by a facile solid state reaction method. The phase and luminescence properties of the phosphors are investigated. The powder X-ray diffraction (XRD) results show that the phosphor has a tetragonal phase crystal structure. The quenching concentration of single doped Dy³⁺ and Sm³⁺ in the LiLa(WO₄)₂ are determined to be 6% and 3%, respectively. Under the excitation of 404 nm, warm white light is obtained in the co-doped phosphors. With the concentration of Sm³⁺ increasing, the correlated color temperature (CCT) gradually decreases from 3090 to 2453 K. Two kinds of energy transfer may exist at the same time. The overlap between the emission spectrum of Dy³⁺ and the excitation spectrum of Sm³⁺ reveals that the energy of Dy³⁺ can transfer to Sm³⁺ via radiation. Another way of energy transfer, that is non-radiative energy transfer, is attributed to the excited state of Dy³⁺ (⁴F_9/2) slightly higher than that of Sm³⁺ (⁴I_19/2). The calculation results show that non-radiative energy transfer process from Dy³⁺ to Sm³⁺ ions is predominated by quadrupole–quadrupole interaction.     

Effect of solvent on the stability constant of complex formation and the thermodynamic parameters between dicyclohexyl-18-crown-6 with Eu3+, La3+, Er3+ and Y3+ cations

The complexation reaction between Eu³⁺, La³⁺, Er³⁺ and Y³⁺ cations with the dicyclohexyl-18-crown-6 (DCH18C6) in acetonitrile (AN)–dimethylformamide (DMF) and AN–methanol (MeOH) binary systems have been studied at different temperatures using conductometric method. The conductometric data show that the stoichiometry of the complexes is 1:1 [ML]. The results show that the stability constant of complexes in various solvents is: AN > MeOH > DMF. In the some cases, the minimum of logK_f for (DCH18C6–Eu³⁺), (DCH18C6–La³⁺), (DCH18C6–Er³⁺) and (DCH18C6–Y³⁺) complexes in AN–MeOH binary systems obtain at χ_MeOH ~ 0.75, and also, the logK_f of (DCH18C6–Er³⁺) complex in AN–DMF binary systems show a minimum at χ_AN ~ 0.75. Non-linear behavior was observed for the stability constant of complexes versus the composition of the solvent systems. The experimental data show that the selectivity order of DCH18C6 for these cations in AN–MeOH binary systems (mol% AN = 50, 75) at 25 °C is: Y³⁺ > Er³⁺ > Eu³⁺ > La³⁺. The values of thermodynamic parameters (?H?_C) for formation of complexes were obtained from temperature dependence of stability constants of complexes using the van′t Hoff plots and the standard entropy (?S?_C) were calculated from the relationship: ?G?_C, 298.15 = ?H?_C ?298.15?S?_C. The results show that the values of these thermodynamic parameters are influenced by the nature and the composition of the binary systems.     

Luminescent properties of SrBPO5:Dy3+ and effect of Co-doping with Tm3+

A series of phosphors SrBPO₅:Dy³⁺ and SrBPO₅:Dy³⁺,Tm³⁺ was synthesized by traditional solid-state high-temperature method and was characterized by X-ray diffraction (XRD) and fluorescence spectrophotometry. For SrBPO₅:Dy³⁺ material, the f-f transitions of Dy³⁺ ions were assigned and discussed, and the optimal doping concentration of Dy³⁺ was found. As a result of co-doping SrBPO₅:Dy³⁺ with Tm³⁺, the phosphors SrBPO₅:Dy³⁺,Tm³⁺ can be effectively excited by 360 nm ultraviolet (UV), and exhibit color-tunable emission from blue to yellowish-white region with different doping concentration. The present study can pave the way for the creation of efficient UV phosphors using Dy³⁺,Tm³⁺ co-doped systems for near-UV InGaN-based light emitting diodes (LEDs).     

Optical Spectroscopy and Excited-State Dynamics of Eu3+-Doped Bismuth Borate Glasses Containing CuO

Bismuth borate glasses containing phosphors and luminescent rare-earths are of interest for applications in light-emitting devices. Herein, the influence of CuO impurities on red-emitting Eu³⁺-doped bismuth borate glasses of the 25Bi₂O₃-15BaO-10Li₂O-50B₂O₃ type was investigated by various spectroscopic methods. The glasses were prepared by the melt-quench technique and characterized by X-ray diffraction (XRD), Fourier transform-infrared (FT-IR) spectroscopy, UV/Vis optical absorption (OA), and photoluminescence (PL) spectroscopy including decay kinetics assessment. The XRD data confirmed the amorphous nature of the glasses whereas FT-IR spectra indicated the basic structural features of trigonal BO₃ units and BO₄ tetrahedra. The OA analysis showed that addition of CuO up to 0.5 mol% results in significant growth of the visible Cu²⁺ absorption band around 715 nm, with slight decrease in the optical band gap energies assessed through Tauc plots. A drastic PL quenching of Eu³⁺ ions emission was evidenced concurring with the detrimental effect of Cu²⁺. The assessment of the Eu³⁺ emission decay curves revealed significant lifetime decrease of the ⁵D₀ emitting state with increasing CuO concentration. An analysis of quenching constants was finally performed comparing results from integrated PL data with the emission decay rates. It is argued that the bismuth borate glass system supports an effective Eu³⁺→Cu²⁺ energy transfer (more so than phosphates) in connection with a strong spectral overlap between Eu³⁺ emission and Cu²⁺ absorption.