Thermophysical studies on uranyl nitrate hexahydrate–Iron (III) nitrate nonahydrate system

Individual nitrates, UO₂(NO₃)₂·6H₂O and Fe(NO₃)₃·9H₂O as well as their binary mixtures in various mol ratios have been studied using simultaneous thermal techniques and X-ray powder diffraction measurements. Nature and stoichiometry of hydroxynitrates of iron and uranium were altered by changing the heating rates for the equal mass of binary nitrate mixtures under identical gas flow conditions. Evolved gas analysis and thermogravimetric measurements indicated the absence of direct interaction between two nitrates in the binary nitrate mixtures. Both the nitrates decomposed independently in the mixtures to their respective oxides. These results have been supported by X-ray powder diffraction measurements. Phase diagram of UO₂(NO₃)₂·6H₂O–Fe(NO₃)₃·9H₂O system containing 0–100 mol% of UO₂(NO₃)₂·6H₂O was constructed using differential thermal analysis technique. The formation of the eutectic at 33 °C for 50 mol% uranyl nitrate hexahydrate–50 mol% iron (III) nitrate nonahydrate mixture has been observed for the first time.     

[Sm(NO3)3(TPTZ)(H2O)]·2H2O [TPTZ is 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]

The title compound, aqua­tris­(nitrato)[2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]samarium dihydrate, [Sm(NO₃)₃­(C₁₈H₁₂N₆)­(H₂O)]·­2H₂O, was prepared from Sm(NO₃)₃·6H₂O and 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine. The metal atom is ten‐coordinate being bonded to the terdentate TPTZ ligand, three bidentate nitrates and a water mol­ecule.     

纳米复合氧化物CuO·SnO2的制备与结构表征

0引言由于纳米材料在热学、电学、磁学、光学等方面具有的独特性能,使其在新功能材料、催化、光电能转换等许多领域引起了人们浓厚的研究兴趣[1]。近年来,纳米催化剂对固体推进剂的燃烧性能影响研究已成为热点[2～9]。但是由于固体推进剂燃烧的特殊性,要求不仅提高燃速,而且降低压力指数,因此并非所有的纳米催化剂都是有效的。大量实践已证明[10],多种催化剂的复合使用,将可获得远远优于单一催化剂的效果。研究已发现[11],纳米复合氧化物是由多种元素复合而成,使其在结构和性能上得到互补和叠加,加上纳米粒子所具有的各种效应,从而产生独特…     

Influence of Microwave Synthesis Parameters on the Size and Morphology of the Resulting MgAl2O4 Nanoparticles

In the present study, Nano-sized magnesium aluminate powders were successfully synthesized via microwave process based on the reaction between Mg (NO₃)₂·6H₂O and Al (NO₃)₃·9H₂O in distilled water, at various conditions. The products were characterized by X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, photoluminescence (PL) spectroscopy, and EDAX analysis. The effects of different parameters such as reaction time and microwave power on the morphology, particle size, and PL properties of the product were studied by SEM images and the PL.     

Preparation, characterization, and catalytic activity of rare earth metal oxide nanoparticles

In present study, a series of rare earth metal oxide (CeO₂, Pr₂O₃, and Nd₂O₃) nanoparticles have been prepared by sol–gel route using Ce(NO₃)₃·6H₂O, Pr(NO₃)₃·6H₂O and Nd(NO₃)₃·6H₂O, and citric acid as precursor materials. Powder X-ray diffraction, scanning electron microscopy, and transmission electron microscopy are employed to characterize the size and morphology of the nano oxide particles. The particles are spherical in shape and the average particle size is of the order of 11–30 nm. Their catalytic activity was measured on the thermal decomposition of ammonium perchlorate and composite solid propellants (CSPs) by thermogravimetry (TG), TG coupled with differential thermal analysis (TG–DTA), and ignition delay measurements. The ignition delays and activation energies are found to decrease when rare earth metal oxide nanoparticles were incorporated in the system. Addition of metal oxide nanoparticles to AP led to shifting of the high temperature decomposition peak toward lower temperature and the burning rate of CSPs was also found to enhance. However, E _a activation energy for decomposition was also found to decrease with each catalyst.     

Photolysis of alkaline-earth nitrates

Peroxynitrite and nitrite ions are the diamagnetic products of photolysis (with light at a wavelength of 253.7 nm) of alkaline-earth nitrates; the paramagnetic products and hydrogen peroxide were not found. The structural water in alkaline-earth nitrate crystals did not affect the qualitative composition of the photodecomposition products. The quantum yield of nitrite ions was 0.0012, 0.0038, 0.0078, and 0.0091 quanta^?1 and that of peroxynitrite ions was 0.0070, 0.0107, 0.0286, and 0.0407 quanta^?1 for Sr(NO₃)₂, Ba(NO₃)₂, Ca(NO₃)₂ · 4H₂O, and Mg(NO₃)₂ · 6H₂O, respectively.     

纳米级PbCO3的制备与应用

PbCO3作为燃烧催化剂被广泛应用于推进剂中,但目前推进剂中使用的PbCO3颗粒尺寸大、粒度分布不均匀,严重地影响了固体推进剂的燃烧性能[1~3]。纳米粒子因其尺寸小,比表面积大,且随着粒径减小,比表面积急剧变大,活性中心数迅速增加,大大增强了纳米粒子的催化活性,使得各种纳米级     

Superparamagnetic and ferromagnetic behavior of ZnFe2O4 nanoparticles synthesized by microwave-assisted hydrothermal method

Zinc ferrite (ZnFe₂O₄) nanoparticles were successfully synthesized from Zn(NO₃)₂ · 6H₂O and Fe(NO₃)₃ · 9H₂O by microwave hydrothermal method at 150°C for 1 h. Cubic ZnFe₂O₄ with particle size below 7 nm was formed in the solution at pH ≥ 6. The crystallinity and particle size of ZnFe₂O₄ nanoparticles were increased after calcination. The effects of pH of the precursor solution and calcination on the particle size and crystallinity of the particles were studied. At room temperature the products show superparamagnetic and ferromagnetic properties, determined by their size. The formation mechanism of ZnFe₂O₄ was also discussed according to the experimental results.

     

Preparation of CoxFe3?xO4 nanoparticles by thermal decomposition of some organo-metallic precursors

This paper presents a study for the preparation of Co_xFe_3−xO₄ (x = 0.02, 0.2, 0.5, 0.8, 1.0, 1.1, 1.5) nanoparticles, starting from metal nitrates: Co(NO₃)₂·6H₂O, Fe(NO₃)₃·9H₂O and ethylene glycol (C₂H₆O₂). By heating the solutions metal nitrates-ethylene glycol, the redox reaction took place between the anion NO₃ ⁻ and OH–(CH₂)₂–OH with formation of carboxylate anions. The resulted carboxylate anions reacted with Co(II) and Fe(III) cations to form coordinative compounds which are precursors for cobalt ferrite. XRD and magnetic measurements have evidenced the formation of cobalt ferrite for all studied molar ratios. The average diameter of the cobalt ferrite crystallites was estimated from XRD data and showed values in the range 10–20 nm. The crystallites size depends on the annealing temperature. The magnetization of the synthesized samples depends on the molar ratio Co/Fe and on the annealing temperature.     

Synthesis and Crystal Structure of a Puckered Rhombus Grid-like Coordination Polymer with Bridging Ligand Containing Sulfanyl Linker

Introduction The design and construction of metal-organic frameworks (MOFs), obtained by metal-directed self-assembly from labile metal centers and multidentate bridging ligands, is a rapidly developing area of su-pramolecular chemistry.1-3 Besides the aesthetic struc-tural and fascinating functional motifs, they are of in-terest both for understanding the mechanisms of the assembly process and for the host-guest chemistry asso-ciated with their large central cavities.4-13 It has been documen…     

Synthesis and spectral studies of new macrocyclic Schiff base Cu(II), Ni(II), Cd(II), Zn(II), Pb(II), and La(III) complexes containing pyridine head unit

1,6-Bis(2-formylphenyl) hexane (I) was derived from 1,6-dibromohexane with salicylaldehyde and K₂CO₃ and the ligand (L) was derived from compound I and 2,6-diaminopyridine. Then, the Cu(II), Ni(II), Pb(II), Zn(II), Cd(II), and La(III) complexes with L were synthesized by the reaction of this ligand and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Zn(NO₃)₂ · 6H₂O, Cd(NO₃)₂ · 6H₂O, and La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes were characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV-Vis spectra, magnetic susceptibility, conductivity measurements, and mass spectra. All complexes are diamagnetic and the Cu(II) complex is binuclear. The article is published in the original.     

CuAl2O4 powder synthesis by sol-gel method and its photodegradation property under visible light irradiation

Nanocrystalline spinel CuAl₂O₄ powders were prepared by sol-gel method from nitrate Cu(NO₃)₂·3H₂O, Al(NO₃)₃·9H₂O and complex C₆H₈O₇·H₂O. Sintering was carried out at 400, 500, 600, 700, 800°C respectively for 2 h in air. The XRD patterns started to appear CuAl₂O₄ peaks after sintering of 500°C and consist of only CuAl₂O₄ peaks as spinel crystal after sintering of 700°C. The powders were analyzed by TEM and UV-vis diffuse reflectance spectrum to be round, about 10–30 nm in size and Eg=1.77 eV. Photodegradation property of nanocrystalline CuAl₂O₄ powders was investigated by using methyl orange as model pollutant and mercury lamp (λ>400 nm) as energy source. The results indicated that CuAl₂O₄ powders sintered at 700°C had the excellent visible photocatalytic property. Under the irradiation of visible light, methyl orange could be degraded 97% in 120 min.     

水滑石晶体长厚比及晶粒尺寸控制方法研究

层状双金属氢氧化物（LayeredDoubleHydrox－ides，简称LDH）是一类重要的无机晶体材料，因其具有层状结构以及层板元素的可调控性和层间阴离子的可交换性，在催化、离子交换、吸附、医药犤１～８犦等方面具有广泛的用途，已受到人们越来越广泛的关注。近年来，随该类材料应用领域的不断拓展，在许多情况下要求LDH晶体具有小的粒径尺寸，以便最大限度地发挥其功能性。例如将LDH作为阻燃剂犤９犦使用，小粒径粉体可增强与聚合物基材的相容性，提高材料的阻燃、抑烟和力学性能。另一方面，因LDH具有层状结构，在复合材料中其层板能有效…     

非平衡晶化控制水滑石晶粒尺寸

本文采用非平衡晶化法通过在晶化后期补加原料合成了一系列不同晶粒尺寸的水滑石（LDH）样品,研究表明：非平衡晶化法可在一定范围内调控LDH的粒径,所合成的LDH样品组成稳定,晶体结构完整。     

Identification of the Structural Boundary between [Ln(18‐crown‐6)(NO3)3] and [Ln(NO3)3(H2O)3] · 18‐crown‐6 Motifs in the Lanthanide Series

Recrystallization of Ln(NO₃)₃ (Ln = Sm, Eu, Yb) in the presence of 18‐crown‐6 under aqueous conditions yielded [Ln(NO₃)₃(H₂O)₃] · 18‐crown‐6. X‐ray crystallography revealed isomorphous structures for each of the lanthanide complexes where [Ln(NO₃)₃(H₂O)₃] is involved in hydrogen bonding interactions with 18‐crown‐6. The transition point where the structural motif changes from [Ln(18‐crown‐6)(NO₃)₃] (with the metal residing in the crown cavity) to [Ln(NO₃)₃(H₂O)₃] · 18‐crown‐6 has been identified as at the Nd/Sm interface. A similar investigation involving [Ln(tos)₃(H₂O)₆] (tos = p‐toluenesulfonate) and 18‐crown‐6 were resistant to crown incorporation. X‐ray studies show extensive intra‐ and intermolecular hydrogen bonding is present.     

3D Coordination Polymers with Chiral Structures, [Ln2(tda)2(H2O)3]·5H2O: Hydrothermal Synthesis,Structural Characterization,and Luminescent Properties

Reactions of H₃tda (H₃tda = 1H‐1, 2, 3‐triazole‐4, 5‐dicarboxylic acid) with Sm(NO₃)₃ · 6H₂O, Eu(NO₃)₃ · 6H₂O, and Tb(NO₃)₃ · 6H₂O, in the presence of NaOH under hydrothermal conditions, produced three new coordination polymers, [Ln₂(tda)₂(H₂O)₃] · 5H₂O [Ln = Sm ( 1 ), Eu ( 2 ), Tb ( 3 )]. These compounds were structurally characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis (TGA), PXRD and single‐crystal X‐ray diffraction. The single‐crystal X‐ray diffraction studies of compounds 1 – 3 reveal that all compounds are three‐dimensional porous structures with chiral frameworks. Furthermore, the luminescence studies of compound 2 and 3 in the solid state reveal that they are potential luminescent materials at room temperature.     

Synthesis and crystal structures of PrIII and NdIII complexes with the macrocyclic cavitand cucurbit[6]uril

The [{Pr(NO₃)₂(H₂O)₃}{Pr(NO₃)(H₂O)₄} (C₃₆H₃₆N₂₄O₁₂)](NO₃)₃·4H₂O and [{Nd(NO₃)(H₂O)₄} ₂(NO₃@C₃₆H₃₆N₂₄O₁₂)][Nd(NO₃)₆] complexes were prepared by heating a mixture of lanthanide nitrates, cucurbit[6]uril, and water in a sealed tube. X-ray diffraction study demonstrated that the metal atoms in the former complex are linked to the macrocycle through tridentate coordination of the portal oxygen atoms of cucurbit[6]uril to the praseodymium(III) cation. The neodymium(III) complex is the first example of lanthanide compounds with cucurbit[6]uril belonging to coordination polymers. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1511–1517, September, 2006.     

Physico-chemical characterization of thermal decomposition course in zinc nitrate-copper nitrate hexahydrates

This study reports experimental investigations by non-isothermal TG/DSC analysis of Zn(NO₃)₂·4H₂O, Cu(NO₃)₂·4H₂O and their mixtures of known compositions in the temperature range 30–1200°C. Solid/liquid transitions in the sealed samples of the hexahydrate salts and their mixtures were also studied by DSC in the temperature range 0–60°C. The mixture with composition 0.85Zn(NO₃)₂·6H₂O+0.15Cu(NO₃)₂·6H₂O showed single melting peak at 29°C. This mixture was chosen for detailed studies. Melting temperature and heat of fusion of single salt hexahydrates and of the mixture were calculated from DSC endotherms. The different stages in the thermal decomposition processes have been established. The intermediate and the final solid products of the thermal decomposition were analyzed by XRD. The scheme and the decomposition temperature depended on the composition of the starting material. The final decomposition products were CuO (monoclinic), Cu₂O (cubic), ZnO (hexagonal) and their mixtures with the defined crystalline structures. Possible influence of the addition of CuCl₂·2H₂O into the mixture 0.85Zn(NO₃)₂·6H₂O+0.15Cu(NO₃)₂·6H₂O and a gel combustion technique of the precursor preparation, on the composition and morphology of the solid decomposition products, were also studied. The gel combustion technique, using citric acid added to a mixture of 0.85Zn(NO₃)₂·6H₂O+0.15Cu(NO₃)₂·6H₂O, was applied in an attempt to obtain mixed Zn/Cu oxides of a particular mole ratio. The morphology of the solid decomposition products was examined by SEM.     

Magnesium(II), Calcium(II), and Barium(II) Coordination Compounds Constructed by 1H‐Tetrazolate‐5‐acetic Acid Ligand

Reactions of H₂tza (H₂tza = 1H‐tetrazolate‐5‐acetic acid) with Mg(NO₃)₂ · 6H₂O, Ca(NO₃)₂ · 4H₂O, or Ba(NO₃)₂ with the presence of KOH under hydrothermal conditions, produced three new coordination compounds, [M(tza)(H₂O)₂] (M = Mg ( 1 ), Ca ( 2 ), Ba ( 3 )). These compounds were structurally characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction. Compounds 1 and 3 display 2D structures, whereas 2 reveals a 1D structure with bridging tza ligand molecules as linkers. Furthermore, the luminescence properties of 1 – 3 at room temperature in the solid state were also investigated. The results show that the nature of metal ions play an important role in governing the molecular frameworks of 1 – 3 , and the strong coordinate abilities of carboxylate and tetrazolate group, endow tza with abundant coordination modes.     

Raman studies of molten salt hydrates: the beryllium and aluminium nitrate-water systems

Raman spectra of the liquid systems Be(NO₃)₂ · 20H₂O, Be(NO₃)₂ · 4H₂O, Al(NO₃)₃·20H₂O, and Al(NO₃)₃ · 9H₂O have been recorded. The spectra are analysed in terms of vibrational modes arising from water, the nitrate ion, the aquated metal ions and hydrolysis products. For the concentrated beryllium system, though not for the aluminium system, the spectra suggest a significant degree of proton transfer from [Be(OH₂)₄]²⁺ to NO₃^?. Solvent-separated metal-nitrate ion pairs appear to be present in all the systems studied.