gem‐Dimethyl‐bearing C‐Glucosides as Sodium‐glucose Co‐transporter 2 (SGLT2) Inhibitors

Three novel gem‐dimethyl C‐glucosides were designed as sodium‐glucose co‐transporter 2 (SGLT2) inhibitors, and their syntheses started from D‐glucose and three 2‐substituted‐5‐bromobenzoic acids were achieved via a facile 8‐step protocol, with the key step being anhydrous aluminum chloride‐catalyzed Friedel‐Crafts alkylation of tertiary alcohols and phenetol. These three SGLT2 inhibitors were evaluated in vivo with a mice oral glucose tolerance test (OGTT), and the anti‐hyperglycemic activities of all these three compounds were comparable with that of the positive control Dapagliflozin.     

保护的几丁寡糖及结构类似物的合成：复杂氨基寡糖合成的通用方法

建立了逐步合成具有重要生物活性的2-脱氧-2-氨基葡萄糖寡糖链的通用方法。采用邻苯二甲酰基保护氨基、硫代苯基为还原末端的离去基团,以氨基葡萄糖为起始原料,几种保护的几丁寡糖及结构类似物被合成：3-O-乙酰基-4,6-O-亚苄基-2-脱氧-2-邻苯二甲酰亚氨基-b-D-吡喃葡萄糖-（1→4）-（3-O-乙酰基-6-O-苄基-2-脱氧-2-邻苯二甲酰亚氨基）-b-D-吡喃葡萄糖甲苷（4）、3-O-乙酰基-4,6-O-亚苄基-2-脱氧-2-邻苯二甲酰亚氨基-b-D-吡喃葡萄糖-（1→4）-（3-O-乙酰基-6-O-苄基-2-脱氧-2-邻苯二甲酰亚氨基-b-D-吡喃葡萄糖）-（1→4）-（3-O-乙酰基-6-O-苄基-2-脱氧-2-邻苯二甲酰亚氨基）-b-D-吡喃葡萄糖甲苷（6）、3-O-乙酰基-4,6-O-亚苄基-2-脱氧-2-邻苯二甲酰亚氨基-b-D-吡喃葡萄糖-（1→3）-（4,6-O-亚苄基-2-脱氧-2-邻苯二甲酰亚氨基）-b-D-吡喃葡萄糖甲苷（8）、3-O-乙酰基-4,6-O-亚苄基-2-脱氧-2-邻苯二甲酰亚氨基-b-D-吡喃葡萄糖-（1→3）-（4,6-O-亚苄基-2-脱氧-2-邻苯二甲酰亚氨基-b-D-吡喃葡萄糖）- （1→3）-（4,6-O-亚苄基-2-脱氧-2-邻苯二甲酰亚氨基）- b-D-吡喃葡萄糖甲苷（10）。所合成化合物通过核磁共振和质谱分析确证了其化学结构。     

Synthesis of β-（ 1→6）-Branched （ 1→3）-Glucononaoside with Alter-nate β- and α-Bonds in the Backbone

Lauryl glycoside of β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]α-D-Glcp-(1→3)-β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]α-D-Glcp-(1→3)-β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]β-D-Glcp was synthesized through 3 3 3 strategy. 3-O-Allyl-2,4,6-tri-O-benzoyl-β-D-glucopyranosyl-(1→3)- -[2, 3, 4, 6-tetra-O-benzoyl-β-D-glucopyranosyl-(1→6)-] 1,2-O-isopropylidene-α-D-glucofuranose was used as the key intermediate which was converted to the corresponding trisaccharide donor and acceptor readily.     

An Amperometric Glucose Biosensor Based on Poly (Pyrrole‐2‐Carboxylic Acid)/Glucose Oxidase Biocomposite

A newly developed amperometric glucose biosensor based on graphite rod (GR) working electrode modified with biocomposite consisting of poly (pyrrole‐2‐carboxylic acid) (PCPy) particles and enzyme glucose oxidase (GOx) was investigated. The PCPy particles were synthesized by chemical oxidative polymerization technique using H₂O₂ as initiator of polymerization reaction and modified covalently with the GOx (PCPy‐GOx) after activation of carboxyl groups located on the particles surface with a mixture of N‐(3‐dimethylaminopropyl)‐N′‐ethylcarbodiimide hydrochloride (EDC) and N‐hydroxysuccinimide (NHS). Then the PCPy‐GOx biocomposite was dispersed in a buffer solution containing a certain amount of bovine serum albumin (BSA). The resulting biocomposite suspension was adsorbed the on GR electrode surface with subsequent solvent airing and chemical cross‐linking of the proteins with glutaraldehyde vapour (GR/PCPy‐GOx). It was determined that the current response of the GR/PCPy‐GOx electrodes to glucose measured at +300 mV vs Cl reference electrode was influenced by the duration of the PCPy particles synthesis, pH of the GOx solution used for the PCPy particles modification and the amount of immobilized PCPy‐GOx biocomposite. An optimal pH of buffer solution for operation of the biosensor was found to be 8.0. Detection limit was determined as 0.039 mmol L⁻¹ according signal to noise ratio (S/N: 3). The proposed glucose biosensor was tested in human serum samples.     

Glucose and glycerol concentrations and their tracer enrichment measurements using liquid chromatography tandem mass spectrometry

The present study describes a new liquid chromatography tandem mass spectrometry method for high‐throughput quantification of glucose and glycerol in human plasma using stable isotopically labeled internal standards and is suitable for simultaneous measurements of glucose and glycerol enrichments in connection to in vivo metabolic studies investigating glucose turnover and lipolytic rate. Moreover, in order to keep up with this new fast analysis, simple derivatization procedures have been developed. Prior to analysis, glucose and glycerol were derivatized using benzoyl chloride in order to form benzoylated derivatives via new simplified fast procedures. For glucose, two internal standards were evaluated, [U‐¹³C₆]glucose and [U‐¹³C₆, D₇]glucose, and for glycerol, [U‐¹³C₃, D₈]glycerol was used. The method was validated by means of calibration curves, quality control samples, and plasma samples spiked with [6,6‐D₂]glucose, [U‐¹³C₆]glucose, and [1,1,2,3,3‐D₅]glycerol in order to test accuracy, precision, and recovery of the method. Moreover, post preparative and freeze‐thaw sample stability were tested. The correlation of calibration curves for the glucose concentration were r² = 0.9998 for [U‐¹³C₆]glucose and r² = 0.9996 for [U‐¹³C₆, D₇]glucose, and r² = 0.9995 for the glycerol concentration. Interday accuracy for glucose using [U‐¹³C₆]glucose and glycerol determined in spiked plasma were respectively 103.5% and 106.0%, and the coefficients of variation were 2.0% and 9.7%, respectively. After derivatization, plasma samples were stable for at least 14 days. In conclusion, we have developed and validated a novel, accurate, and sensitive high‐throughput liquid chromatography tandem mass spectrometry method for simultaneous determination of glucose and glycerol concentrations and enrichment of infused tracers most commonly used in human metabolic kinetic studies. Copyright © 2014 John Wiley & Sons, Ltd.     

A Novel Synthesis of 2-Amino-2-deoxy-D-gluconic Acid and Its Complexation with Cu（Ⅱ） in Alkaline Medium

A novel synthesis of the functional carbohydrate 2-amino-2-deoxy-D-gluconic acid was introduced and itscomplex formation with Cu(Ⅱ)was investigated to obtain the stability constant for its further applications to thefood and pharmaceutical industries.The equilibrium was investigated by spectrophotometric measurements andprocessed by dual-series linear regression method.Results:the yield of 2-amino-2-deoxy-D-gluconic acid is 70%.The complexation molar ratio is 1:2,the molar apsorptivity of the complex is 39.906 L·mol~(-1)·cm~(-1) at 630 nm,and the stability constant β_n is 6.24×10~5.     

Copolymerization of poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) with designed molecular structure by a solid‐state polymerization method

Poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) (PVA‐g‐PPDO) with designed molecular structure was synthesized by a solid‐state polymerization. The solid‐state copolymerization was preceded by a graft copolymerization of PDO initiated with PVA as a multifunctional initiator, and Sn (Oct)₂ as a coininitiator/catalyst in a homogeneous molten state. The polymerization temperature was then decreased and the copolymerization was carried out in a solid state. The products prepared by solid‐state polymerization were characterized by ¹H NMR and DSC, and were compared with those synthesized in the homogeneous molten state. The degree of polymerization (D_p), degree of substitution (D_s), yield and the average molecular weight of the graft copolymer with different molecular structure were calculated from the ¹H NMR spectra. The results show that the crystallization process during the solid‐state polymerization may suppress the undesirable inter‐ or intramolecular side reactions, then resulting in a controlled molecular structure of PVA‐g‐PPDO. The results of DSC measurement show that the molecular structures determine the thermal behavior of the PVA‐g‐PPDO. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3083–3091, 2006     

Aqueous solution behavior of comb‐shaped poly(2‐ethyl‐2‐oxazoline)

A series of comb polymers consisting of a methacrylate backbone and poly(2‐ethyl‐2‐oxazoline) (PEtOx) side chains was synthesized by a combination of cationic ring‐opening polymerization and reversible addition–fragmentation chain transfer polymerization. Small‐angle neutron scattering (SANS) studies revealed a transition from an ellipsoidal to a cylindrical conformation in D₂O around a backbone degree of polymerization of 30. Comb‐shaped PEtOx has lowered T_g values but a similar elution behavior in liquid chromatography under critical conditions in comparison to its linear analog was observed. The lower critical solution temperature behavior of the polymers was investigated by turbidimetry, dynamic light scattering, transmission electron microscopy, and SANS revealing decreasing T_cp in aqueous solution with increasing molar mass, the presence of very few aggregated structures below T_cp, a contraction of the macromolecules at temperatures 5 °C above T_cp but no severe conformational change of the cylindrical structure. In addition, the phase diagram including cloud point and coexistence curve was developed showing an LCST of 75 °C of the binary mixture poly[oligo(2‐ethyl‐2‐oxazoline)methacrylate]/water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Poly(N‐isopropylacrylamide)‐based comb‐type grafted hydrogel with rapid response to blood glucose concentration change at physiological temperature

A new type of glucose‐responsive hydrogel with rapid response to blood glucose concentration change at physiological temperature has been successfully developed. The polymeric hydrogel contains phenylboronic acid (PBA) groups as glucose sensors and thermo‐responsive poly (N‐isopropylacrylamide) (PNIPAM) groups as actuators. The response rate of the hydrogel to environmental glucose concentration change was significantly enhanced by introducing grafted poly(N‐isopropylacrylamide‐co‐3‐acrylamidophenylboronic acid) [poly(NIPAM‐co‐AAPBA)] side chains onto crosslinked poly(NIPAM‐co‐AAPBA) networks for the first time. The synthesized comb‐type grafted poly(NIPAM‐co‐AAPBA) hydrogels showed satisfactory equilibrium glucose‐responsive properties, and exhibited much faster response rate to glucose concentration change than normal type crosslinked poly(NIPAM‐co‐AAPBA) hydrogels at physiological temperature. Such glucose‐responsive hydrogels with rapid response rate are highly attractive in the fields of developing glucose‐responsive sensors and self‐regulated drug delivery systems. Copyright © 2008 John Wiley & Sons, Ltd.     

Copper(II) Halide Complexes of 2-Aminopyrimidines: Crystal Structures of [(2-aminopyrimidine) n CuCl2] (n=1,2) and (2-amino-5-bromopyrimidine)2CuBr2

The reaction of CuX₂(X=Cl, Br) with 2-aminopyrimidine in aqueous solution, or 2-amino-5-bromopyrimidine in aqueous acid yields compounds of the forms [LCuCl₂] _n (1), [L₂CuCl₂] (2) and [L'₂CuBr₂] (3) [L=2-aminopyrimidine; L'=2-amino-5-bromo-pyrimidine]. The three compounds all form layered structures in which each copper ion is coordinated to two 2-aminopyrimidine molecules and two halide ions. Common structural threads involve bridging ligation [either by monomeric (1) or hydrogen bonded ligand dimers (2 and 3)], N-H···X and N-H···N hydrogen bonding and π-π stacking interactions as well as semi-coordinate Cu···X bond formation (1 and 2) or Br···Br interactions (3). Compounds 1 and 2 crystallize as two-dimensional coordination polymers with asymmetrically bihalide bridged (CuX₂) _n chains cross-linked into sheets by the 2-aminopyrimidine molecules (1) or by hydrogen bonded L₂ dimers (2). The halide bibridged chains expand their primary copper coordination spheres to give 4 + 2 coordination spheres in 1 and 2. In 3, the layer structure involves coordination of the hydrogen bonded L'₂ dimers and C-Br···Br- interactions. Crystal data: (1): monoclinic, P2₁/m, a=3.929(1), b=12.373(2), c=7.050(1)å, β=91.206(4)°, V=342.7(1)&Aringsup3;, Z=2, D _calc= 2.225Mg/m³, μ=3.878 mm^-1, R=0.0269 for [|I|≥3σ(I)]. For (2): triclinic, P-1, a=4.095(4), b=7.309(5), c=10.123(6) å, α=86.28(6), β=78.44(6), γ=74.55(8)°, V=286.1(4) ų, Z=1, D _calc=1.884 Mg/m³, μ=2.360 mm^-1, R=0.0506 for [|I|≥2σ(I)]. For (3): triclinic, P-1, a=6.074(4), b=7.673(3), c=8.887(3) å, α=108.43(3) β=100.86(5), γ=106.96(4)°, V=357.0(3) ų, Z=1, D _calc=2.657 Mg/m³, μ=12.714mm^-1, R=0.0409 for [|I|≥2σ(I)].     

New Ionic Liquid Compounds Based on Tantalum Pentachloride TaCl5: Synthesis,Structural, and Spectroscopic Elucidation of the (μ‐Oxido)‐Chloridotantalates(V) [BMPy][TaCl6], [BMPy]4[(TaCl6)2(Ta2OCl10)], and [EMIm]2[Ta2OCl10]

1‐Butyl‐4‐methylpyridinium hexachloridotantalate(V), [BMPy][TaCl₆] ( 1 ), tetrakis(1‐butyl‐4‐methylpyridinium) bis(hexachloridotantalate(V) (μ‐oxido)‐decachloridotantalate(V), [BMPy]₄[(TaCl₆)₂(Ta₂OCl₁₀)] ( 2 ), and bis(1‐ethyl‐3‐methylimidazolium)‐(μ‐oxido)‐decachloridoditantalate(V), [EMIm]₂[Ta₂OCl₁₀] ( 3 ) were synthesized and characterized by single‐crystal X‐ray diffraction and vibrational spectroscopy. Compounds 1 and 3 crystallize in the monoclinic space group P2₁/c (no. 14), whereas compound 2 crystallizes in the triclinic space group P (no. 2). All compounds are built up by the mentioned bulky organic cations and octahedral [TaCl₆]^– respective linear [Ta₂OCl₁₀]^2– anions. Coulomb interactions are dominant between the ionic species. FT‐IR and FT‐Raman spectra were recorded and interpreted, especially with respect to the inorganic species [TaCl₆]^– (O_h) and [Ta₂OCl₁₀]^2– (C_i symmetry, approximately D_4h). The melting temperatures of compounds 1 – 3 are given.     

Synthesis,Crystal Structure and Thermal Behavior of 4,5‐Diacetoxyl‐2‐(dinitromethylene)‐imidazolidine

A new energetic material, 4,5‐diacetoxyl‐2‐(dinitromethylene)‐imidazolidine (DADNI), was synthesized by the reaction of 4,5‐dihydroxyl‐2‐(dinitromethylene)‐imidazolidine (DDNI) and acetic anhydride, and characterized by single crystal X‐ray diffraction. Crystal data for DADNI are monoclinic, space group C2/c, a=15.9167(3) Å, b=8.6816(4) Å, c=8.5209(3) Å, β=103.294(9)°, V=1145.9(3) ų, Z=4, µ=0.150 mm⁻¹, F(000)=600, D_c=1.682 g·cm⁻³, R₁=0.0565 and wR₂=0.1649. Thermal decomposition behavior of DADNI was studied and an intensely exothermic process was observed. The kinetic equation of the decomposition reaction is: dα/dT=(10^16.64/β)×4α^3/4exp(−1.582×10⁵/RT). The critical temperature of thermal explosion is 163.76°C. The specific heat capacity of DADNI was studied with micro‐DSC method and theoretical calculation method. The molar heat capacity is 343.30 J·mol⁻¹·K⁻¹ at 298.15 K. The adiabatic time‐to‐explosion of DADNI was calculated to be 87.7 s.     

MOF‐Derived Spinel NiCo2O4 Hollow Nanocages for the Construction of Non‐enzymatic Electrochemical Glucose Sensor

Non‐enzymatic glucose sensor is greatly expected to take over its enzymatic counterpart in the future. In this paper, we reported on a facile strategy to construct a non‐enzymatic glucose sensor by use of NiCo₂O₄ hollow nanocages (NiCo₂O₄ HNCs) as catalyst, which was derived from Co‐based zeolite imidazole frame (ZIF‐67). The NiCo₂O₄ HNCs modified glassy carbon electrode (NiCo₂O₄ HNCs/GCE), the key component of the glucose sensor, showed highly electrochemical catalytic activity towards the oxidation of glucose in alkaline media. As a result, the proposed non‐enzymatic glucose sensor afforded excellent analytical performances assessed with the aid of cyclic voltammetry and amperometry (i–t). A wide linear range spanning from 0.18 μΜ to 5.1 mM was achieved at the NiCo₂O₄ HNCs/GCE with a high sensitivity of 1306 μA mM^?1 cm^?2 and a fast response time of 1 s. The calculated limit of detection (LOD) of the sensor was as low as 27 nM (S/N=3). Furthermore, it was demonstrated that the non‐enzymatic glucose sensor showed considerable anti‐interference ability and excellent stability. The practical application of the sensor was also evaluated by determination of glucose levels in real serum samples.     

Synthesis and self‐assembly of amphiphilic brush‐dendritic‐linear poly[poly(ethylene glycol) methyl ether methacrylate]‐b‐ polyamidoamine‐b‐poly(ε‐caprolactone) copolymers

A series of novel amphiphilic brush‐dendritic‐linear poly[poly(ethylene glycol) methyl ether methacrylate]‐b‐polyamidoamine‐b‐poly(ε‐caprolactone) copolymers (PPEGMEMA‐b‐D_m‐b‐PCL) (m = 1, 2, and 3: the generation number of dendron) were synthesized by the combination techniques of click chemistry, atom transfer radical polymerization (ATRP), and ring‐opening polymerization (ROP). The brush‐dendritic copolymers bearing hydrophilic brush PPEGMEMA and hydrophobic dendron polyamidoamine protected by the tert‐butoxycarbonyl (Boc) groups [D_m‐(Boc) (m = 1, 2, and 3)] were for the first time prepared by ATRP of poly(ethylene glycol) methyl ether methacrylate monomer (PEGMEMA) initiated with the dendron initiator, which was prepared from 2′‐azidoethyl‐2‐bromoisobutyrate (AEBIB) and D_m‐(Boc) terminated with a clickable alkyne by click chemistry. Then, the brush‐dendritic copolymers with primary amine groups (PPEGMEMA‐b‐D_m) were obtained from the removal of the protected Boc groups of the brush‐dendritic copolymers in the presence of trifluoroacetic acid. The brush‐dendritic‐linear PPEGMEMA‐b‐D_m‐b‐PCL copolymers were synthesized from ROP of ε‐caprolactone monomer using PPEGMEMA‐b‐D_m as the macroinitiators and stannous octoate as catalyst in toluene at 130 °C. To the best of our knowledge, this is the first report that integrates hydrophilic brush polymer PPEGMEMA with hydrophobic polyamidoamine (PAMAM) dendron and PCL to form amphiphilic brush‐dendritic‐linear copolymers. The amphiphilic brush‐dendritic‐linear copolymers can self‐assemble into spherical micellar structures in aqueous solution. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

具有生物活性的N-(1-二茂铁亚乙基氨基)-N''-β-D-吡喃糖基硫脲的合成与表征

Several novel N′-[（1-ferrocenylethylidene）amino]-N′-β-D-glycopyranosylthioureas have been efficiently synthesized via a six-step procedure, utilizing three monosaccharides （D-glucose, D-galactose and D-xylose） as starting materials, respectively. They have been preliminarily determined to display biological activity against certain fungi. The target compounds have been unambiguously characterized by spectroscopic method and elemental analysis. An initially alternative synthetic route, which was seemingly reasonable, has been excluded due to its inefficiency.     

A CAS study on S‐loss and O‐loss dissociation mechanisms of the SO2+ ion in the C,D, and E states

In the present work, we mainly study dissociation of the C ²B₁, D²A₁, and E²B₂ states of the SO₂⁺ ion using the complete active‐space self‐consistent field (CASSCF) and multiconfiguration second‐order perturbation theory (CASPT2) methods. We first performed CASPT2 potential energy curve (PEC) calculations for S‐ and O‐loss dissociation from the X, A, B, C, D, and E primarily ionization states and many quartet states. For studying S‐loss predissociation of the C, D, and E states by the quartet states to the first, second, and third S‐loss dissociation limits, the CASSCF minimum energy crossing point (MECP) calculations for the doublet/quartet state pairs were performed, and then the CASPT2 energies and CASSCF spin‐orbit couplings were calculated at the MECPs. Our calculations predict eight S‐loss predissociation processes (via MECPs and transition states) for the C, D, and E states and the energetics for these processes are reported. This study indicates that the C and D states can adiabatically dissociate to the first O‐loss dissociation limit. Our calculations (PEC and MECP) predict a predissociation process for the E state to the first O‐loss limit. Our calculations also predict that the E²B₂ state could dissociate to the first S‐ and O‐loss limits via the A²B₂ ← E²B₂ transition. On the basis of the 13 predicted processes, we discussed the S‐ and O‐loss dissociation mechanisms of the C, D, and E states proposed in the previous experimental studies. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Synthesis of Aib‐ and Phe(2Me)‐Containing Cyclopentapeptides

Some recently described pentapeptides containing the α,α‐disubstituted α‐amino acids Aib and Phe(2Me) have been cyclized in DMF solution using diphenyl phosphorazidate (DPPA), O‐(1H‐benzotriazol‐1‐yl)‐N,N,N′,N′‐tetamethyluronium tetrafluoroborate/1‐hydroxybenzotriazole (TBTU/HOBt), and diethyl phosphorocyanidate (DEPC), respectively, to give the corresponding cyclopentapeptides in fair‐to‐good yields. In the case of peptides with L ‐amino acids, and (R)‐ and (S)‐Phe(2Me), the yields differed significantly in favor of the L /(R) combination. The conformations in the crystals of cyclo(Gly‐Aib‐(R,S)‐Phe(2Me)‐Aib‐Gly) and cyclo(Gly‐(R)‐Phe(2Me)‐Pro‐Aib‐Gly) have been determined by X‐ray crystallography, leading to quite different results. In the latter case, the conformation in solution has been elucidated by NMR studies.     

Photoluminescence Properties of Lanthanide‐Organic Frameworks (LnOFs) with Thiophene‐2,5‐Dicarboxylate and Acetate

S‐heterocyclic dicarboxylic acid, thiophene‐2,5‐dicarboxylic acid (H₂TDC), was employed to construct a series of lanthanide‐organic frameworks (LnOFs) with coligand acetate, formulated as [Ln(TDC)(OAc)(H₂O)]_n [Ln = Eu ( 1 ), Tb ( 2 ), Gd ( 3 ), Dy ( 4 ), Sm ( 5 )] under hydrothermal conditions. Structure analysis reveals that 1 – 5 have dinuclear 3D metal organic frameworks (MOFs), in which TDC^2– and OAc^– display (κ¹‐κ¹)‐(κ¹–κ¹)‐μ₄ and (κ²‐κ¹)‐μ₂ coordination fashions, respectively. The dehydrated products of all compounds show high thermal stability above 410 °C. As for 1 , 2 , 4 , and 5 , the photoluminescence analyses exhibit characteristic luminescence emission bands of the corresponding lanthanide ions in the visible region. In particular, compound 2 displays bright green luminescence in the solid state with ⁵D₄ lifetime of 0.510 ms and relative high overall quantum yield of 16 %, based on an ideal energy gap between the lowest triplet state energy level of H₂TDC ligand and the ⁵D₄ state energy level of Tb³⁺. The energy transfer mechanisms in compounds 1 and 2 were also discussed.     

Water Soluble Gold(I)‐diacetyl‐1,3,5‐triaza‐7‐phosphaadamantane‐arylazoimidazole Complexes: Synthesis and Spectroscopic Study

Reaction of [Au(DAPTA)(Cl)] with RaaiR’ in CH2Cl2 medium following ligand addition leads to [Au(DAPTA)(RaaiR’)](Cl) [DAPTA＝diacetyl-1,3,5-triaza-7-phosphaadamantane, RaaiR’＝p-R-C6H4-N＝N- C3H2-NN-1-R’, (1—3), abbreviated as N,N’-chelator, where N(imidazole) and N(azo) represent N and N’, respectively; R＝H (a), Me (b), Cl (c) and R’＝Me (1), CH2CH3 (2), CH2Ph (3)]. The 1H NMR spectral measurements in D2O suggest methylene, CH2, in RaaiEt gives a complex AB type multiplet while in RaaiCH2Ph it shows AB type quartets. 13C NMR spectrum in D2O suggest the molecular skeleton. The 1H-1H COSY spectrum in D2O as well as contour peaks in the 1H-13C HMQC spectrum in D2O assign the solution structure.     

Investigation on stabilities and spectroscopy of C80O2 based on C80 (D5d) using density functional theory

The relative stabilities of the 17 possible isomers for C₈₀O₂ based on C₈₀ (D_5d) were studied using Becke three parameters plus Lee, Yang, and Parr's (B3LYP) method and 6‐31G (d) basis set in density functional theory. The most stable geometry of C₈₀O₂ was predicted to be 23,24,27,28‐C₈₀O₂ (A) with annulene‐like structures, where the additive bonds are those between two hexagons (6/6 bonds) near the equatorial belt of C₈₀ (D_5d). Electronic spectra of C₈₀O₂ isomers were calculated based on the optimized geometries using intermediate neglect of differential overlap (INDO) calculation. Compared with those of C₈₀ (D_5d), the first absorptions in the electronic spectra of C₈₀O₂ are blue‐shifted owing to the wide energy gaps. ¹³C nuclear magnetic resonance spectra and nucleus independent chemical shifts of the C₈₀O₂ isomers were computed at B3LYP/6‐31G level. The chemical shifts of the bridged carbon atoms in the epoxy structures of C₈₀O₂ compared with those of the bridged carbon atoms in the annulene‐like structures are changed upfield. Generally, the isomers with the annulene‐like structures of C₈₀O₂ are more aromatic than those with the epoxy structures. The addition of the oxygen atoms near the pole of C₈₀ (D_5d) is favorable to improving the aromaticities of C₈₀O₂. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009