Ba3Tb(BO3)3 ∶Ce3+:一种白光LED用绿色荧光粉

采用高温固相法合成了Ba₃Tb(BO₃)₃和Ba₃Tb(BO₃)₃ ∶Ce³⁺两种绿色荧光粉,并研究了材料的发光性质.Ba₃Tb(BO₃)₃材料呈多峰发射,发射峰位于439,493,547,589和629 nm,分别对应Tb³⁺的⁵D关键词： 白光LED 3Tb(BO₃)₃')" href="#">Ba₃Tb(BO₃)₃ 3+')" href="#">Ce³⁺ 发光特性     

Luminescence properties and energy transfer in Ba2Y(BO3)2Cl:Ce3+,Tb3+ phosphors

Novel green-emitting Ba₂Y(BO₃)₂Cl:Ce³⁺,Tb³⁺ phosphors were synthesized by a solid-state method. X-ray diffraction and photoluminescence spectra were utilized to characterize the structures and luminescence properties of the as-synthesized phosphors, respectively. Ba₂Y(BO₃)₂Cl:Ce³⁺,Tb³⁺ phosphors exhibit blue and green emission bands under the excitation of near-ultraviolet light. An asymmetric blue emission originates from the Ce³⁺ ion, whereas the green emission originates from the Tb³⁺ ion. A spectral overlap is found between the emission band of the Ce³⁺ ion and the excitation band of the Tb³⁺ ion, which supports the occurrence of the energy transfer from the Ce³⁺ ion to the Tb³⁺ ion. Meanwhile, the energy transfer is thoroughly investigated by their photoluminescence decay behaviors. The energy-transfer efficiency from the Ce³⁺ ion to the Tb³⁺ ion is also calculated, and a possible mechanism is proposed.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Double emitting phosphor NaSr4(BO3)3:Ce, Tb for near-UV light-emitting diodes

Blue and green double emitting phosphor, Ce³⁺ and Tb³⁺ co-doped NaSr₄(BO₃)₃, was synthesized in a weak reducing atmosphere by a conventional high temperature solid-state reaction technique. For comparison, Ce³⁺ or Tb³⁺ singly doped NaSr₄(BO₃)₃ was also prepared. The emission and excitation spectra of all samples have been investigated. NaSr₄(BO₃)₃:Tb³⁺ excitation includes a strong absorption at about 240 nm and some weak sharp lines in near-ultraviolet (n-UV) spectral region. The excitation of Ce³⁺ and Tb³⁺ co-doped NaSr₄(BO₃)₃ shows a strong broad band absorption in the n-UV region from the contribution of Ce³⁺, which makes it suitable for excitation by a n-UV LED chip. The emission of NaSr₄(BO₃)₃:Ce³⁺,Tb³⁺ consists of a blue emission band from Ce³⁺ and a green emission from Tb³⁺ under the excitation of n-UV light. Energy transfer between Ce³⁺ and Tb³⁺ is also discussed, and the relative intensity of blue emission and green emission could be tuned by adjusting the concentration of Ce³⁺ and Tb³⁺. The phosphor NaSr₄(BO₃)₃:Ce³⁺,Tb³⁺ could be considered as a double emission phosphor for n-UV excited white light-emitting diodes.     

Luminescence enhancement by energy transfer from Ce ions in Ba1.6Ca0.4P2O7:Ce:Tb phosphor

The optical properties of Ba_1.6Ca_0.4P₂O₇ doped with Ce³⁺ and Tb³⁺ are investigated. Under excitation at 280 nm the emission spectrum of Ba_1.6Ca_0.4P₂O₇:Ce³⁺ consists of a peak at 370 nm and a shoulder at the longer wavelength side. The emission spectra of Ba_1.6Ca_0.4P₂O₇:Tb³⁺ shows the well-known emission lines due to ⁵D₄-⁷F_J transitions of Tb³⁺. The green emissions of Tb³⁺ ions are enhanced upon UV excitation through energy transfer from Ce³⁺ to Tb³⁺ ions. The efficiency of such an energy transfer is estimated based on spectroscopic data. The dependence of photoluminescence (PL) intensities of Ce³⁺ and Tb³⁺ emissions on Ce³⁺ or Tb³⁺ concentrations in the systems (Ba_1.6Ca_0.4P₂O₇:0.04Ce³⁺,xTb³⁺ and Ba_1.6Ca_0.4P₂O₇:xCe³⁺,0.04Tb³⁺) and the temperature dependence of PL emission spectra of Ba_1.6Ca_0.4P₂O₇:0.06Ce³⁺,0.04Tb³⁺ is also investigated.     

Luminescence properties of novel NaBa4(BO3)3:Ce, Eu phosphors

Novel Eu³⁺, Ce³⁺ activated NaBa₄(BO₃)₃ phosphors were synthesized by solid-state reactions. The excitation spectrum of NaBa₄(BO₃)₃:Ce³⁺ consists of an intense band peaking at 350 nm and a weak band in the higher energy side, and the emission spectrum exhibits a blue band with a maximum at about 420 nm. The Eu³⁺ emission in NaBa₄(BO₃)₃ consists of the transitions from ⁵D₀ to ⁷F_J, and the excitation spectrum consists of broad excitation band peaking at 270 nm and some intense narrow lines. The optimum doped concentration, the critical distance of the concentration quenching, and the fluorescence lifetime have also been investigated.     

Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

中子探测晶体Li6Gd(BO3)3:Ce的光谱特性研究

文章用提拉法生长出Li₆Gd(BO₃)₃:Ce晶体,并对其光谱性能与发光过程进行了探索. 借助于真空紫外-紫外透过光谱测试,发现晶体的透过光谱中存在Ce³⁺离子和Gd³⁺的特征吸收峰,同时还存在与Ce⁴⁺离子相关的电荷迁移带. 对晶体的真空紫外-紫外激发发射光谱进行研究发现,在晶体存在着Ce³⁺离子的5d→4f辐射跃迁发光与Gd³⁺离子的4f→4f辐射跃迁发光,而且存在着Gd³⁺→Ce³⁺之间的能量传递. 对Li₆Gd(BO₃)₃:Ce晶体的X射线与γ射线激发发射光谱研究可知,晶体在高能射线激发下的闪烁光主要是Ce³⁺离子的发光. 关键词： 6Gd(BO₃)₃:Ce晶体')" href="#">Li₆Gd(BO₃)₃:Ce晶体 真空紫外-紫外透过光谱 真空紫外-紫外激发发射光谱 能量传递     

Luminescence spectroscopy of Ce3+-doped ABaPO4 (A=Li, Na, K) phosphors

Ce³⁺ doped ABaPO₄ (A=Li, Na, K) phosphors were prepared by conventional high temperature solid-state reaction. The phosphors were investigated by XRD, photoluminescence excitation and emission spectra, and luminescence decay curves. The five 5d levels corresponding to the 4f¹→4f⁰5d¹ transition of Ce³⁺ ions were identified. The spectroscopic parameters, e.g., the 5d barycenter, the crystal-field splitting, and the Stokes shift, were discussed. LiBaPO₄:Ce³⁺ phosphor could be efficiently excited by the near-UV lights (330–420 nm) and showed a broad emission band in the range of 430–620 nm with the maximum wavelength at 468 nm. In contrast, Ce³⁺-doped NaBaPO₄ and KBaPO₄ showed only excitation bands in a limited UV region (230–370 nm) and have blue emission at 385 nm and 416 nm, respectively. The temperature quenching of luminescence and the chromaticity coordinates were reported. The luminescence properties were discussed by analyzing the crystal structure and the local surroundings of Ce³⁺ ions on the Ba²⁺ sites.     

Luminescence of calcium orthoborate doped by Ce3+ ions

The luminescence properties of calcium orthoborate Ca₃(BO₃)₂ doped with cerium are studied upon x-ray (～30 keV) and VUV (3.5–15 eV) synchrotron excitation. The emission bands peaked at 392 and 420 nm are attributed to interconfigurational transitions of Ce³⁺ ions. The short-wavelength emission band at 340 nm is caused by radiative decay of exciton-like states. The fundamental absorption edge of Ca₃(BO₃)₂ is found to be near 7.1 eV. Based on thermoluminescence data and other information, the behavior of defects in Ca₃(BO₃)₂:Ce³⁺ is studied.     

Luminescence of Ce and Pr doped Sr2Mg(BO3)2 under VUV-UV and X-ray excitation

This report presents the luminescence properties of Ce³⁺ and Pr³⁺ activated Sr₂Mg(BO₃)₂ under VUV-UV and X-ray excitation. The five excitation bands of crystal field split 5d states are observed at about 46 729, 44 643, 41 667, 38 314 and 29 762 cm⁻¹ (i.e. 214, 224, 240, 261 and 336 nm) for Ce³⁺ in the host lattice. The doublet Ce³⁺ 5d→4f emission bands were found at about 25 840 and 24 096 cm⁻¹ (387 and 415 nm). The influence of doping concentration and temperature on the emission characteristics and the decay time of Ce³⁺ in Sr₂Mg(BO₃)₂ were investigated. For Pr³⁺ doped samples, the lowest 5d excitation band was observed at about 42017 cm⁻¹ (238 nm), a dominant band at around 35714 cm⁻¹ (280 nm) and two shoulder bands were seen in the emission spectra. The excitation and emission spectra of Ce³⁺ and Pr³⁺ were compared and discussed. The X-ray excited luminescence studies show that the light yields are ∼3200±230 and ∼1400±100 photons/MeV of absorbed X-ray energy for the samples Sr_1.86Ce_0.07Na_0.07Mg(BO₃)₂ and Sr_1.82Pr_0.09Na_0.09Mg(BO₃)₂ at RT, respectively.     

Luminescence properties of solid solutions of borates doped with rare-earth ions

The structural and luminescence properties of Lu _x Y_{1 ? x} BO₃ solid solutions doped with Ce³⁺ or Eu⁺³ have been investigated. It has been found that the solid solutions crystallize in the vaterite phase with a lutetium concentration x < 0.5. For a higher lutetium concentration x, the solid solutions contain an additional calcite phase with a content less than 5 wt %. The luminescence spectra are characterized by intensive impurity emission under excitation with the synchrotron radiation in the X-ray and ultraviolet spectral ranges. It has been shown that, as the lutetium concentration x in the Lu _x Y_{1 ? x} BO₃: Ce³⁺ solid solutions increases, the emission intensity smoothly decreases, which is associated with a gradual shift of the Ce³⁺ 5d(1) level toward the bottom of the conduction band, as well as with a decrease in the band gap. It has been established that, in the Lu _x Y_{1 ? x} BO₃: Eu³⁺ solid solutions with intermediate concentrations x, the efficiency of energy transfer to luminescence centers increases. This effect is explained by the limited spatial separation of electrons and holes in the solid solutions. It has been demonstrated that the calcite phase adversely affects the luminescence properties of the solid solutions.     

Spectral properties of Ce3+ doped yttrium lanthanum oxide transparent ceramics

Ce3+-doped yttrium lanthanum oxide (Y0.9La0.1)2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce:(Y0.9La0.1)2O3 transparent ceramics are investigated. There appear two characteristic absorption peaks of Ce3+ ions at 230 nm and 400 nm, separately. It is found that Ce3+ ions can efficiently produce emission at 384 nm from (Y0.9La0.1)2O3 transparent ceramic host, while the emission is completely quenched in Re2O3 (Re=Y, Lu, La) host materials.     

Fluorescence emission spectrum and energy transfer in Eu and Mn co-doped Ba2Ca(BO3)2 phosphors

Eu²⁺ and Mn²⁺ co-doped Ba₂Ca(BO₃)₂ phosphors yield two emission bands consisting of green and red components under the excitation of 360 nm, which shows a great potential for white LEDs. Effective energy transfer occurs in Eu²⁺/Mn²⁺ co-doped Ba₂Ca(BO₃)₂ host due to the large spectral overlap between the emission of Eu²⁺ and the excitation of Mn²⁺. The energy transfer from Eu²⁺ to Mn²⁺ is thoroughly investigated by their excitation, emission and photoluminescence decay behaviors, and is demonstrated to be via the dipole–quadrupole interaction.     

Ca2BO3Cl:Ce,Eu: A potential tunable yellow-white-blue-emitting phosphors for white light-emitting diodes

Polycrystalline Ca₂BO₃Cl:Ce³⁺,Eu²⁺ phosphors were synthesized by a solid-state reaction and which could display tunable color emission from blue to yellow under an ultraviolet (UV) source by adjusting the ratio of Ce³⁺ and Eu²⁺ appropriately. The mechanism of resonance-type energy transfer from Ce³⁺ to Eu²⁺ was established to be electric dipole-dipole natured, and the critical distance was estimated to be 31 Å based on the spectral overlap and concentration quenching model. A white light was obtained from Ca₂BO₃Cl:0.06Ce³⁺,0.01Eu²⁺ phosphor with chromaticity coordinates (x=0.31, y=0.29) and relative color temperature of 7330 K upon excitation with 360 nm, which is potentially a good candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

Potential tunable white-emitting phosphor LiSr4(BO3)3:Ce3+, Eu2+ for ultraviolet light-emitting diodes

A novel Ce³⁺/Eu²⁺ co-activated LiSr₄(BO₃)₃ phosphor has been synthesized by traditional solid-state reaction. The samples could display varied color emission from blue towards white and ultimately to yellow under the excitation of ultraviolet (UV) light with the appropriate adjustment of the relative proportion of Ce³⁺/Eu²⁺. The resonance-type energy transfer mechanism from Ce³⁺ to Eu²⁺ in LiSr₄(BO₃)₃:Ce³⁺, Eu²⁺ phosphors is dominant by electric dipole–dipole interaction, and the critical distance is calculated to be about 29.14 Å by the spectra overlap method. White light was observed from LiSr₄(BO₃)₃:mCe³⁺, nEu²⁺ phosphors with chromaticity coordinates (0.34, 0.30) upon 350 nm excitation. The LiSr₄(BO₃)₃:Ce³⁺, Eu²⁺ phosphor has potential applications as an UV radiation-converting phosphor for white light-emitting diodes.     

Luminescence and time-resolved spectroscopy properties of (Gd1−xEux)(BO2)3 multicrystals

(Gd_1?xEu_x)(BO₂)₃ (0≤x≤1) phosphors are synthesized by traditional high temperature solid state reaction. The photoluminescence (PL) properties of Gd(BO₂)₃ and Gd(BO₂)₃ activated with Eu³⁺ are investigated. The PL spectra exhibit the typical characteristic emission and excitation of Gd³⁺ and Eu³⁺ ions, and support the energy transfer taking place from Gd³⁺ to Eu³⁺ ions. The relationship between Eu³⁺ doping concentration and emission intensity is also studied. Even if all of the Gd³⁺ ions are substituted by Eu³⁺ ions, the concentration quenching between Eu³⁺ happens. However, the quenching is not complete. The luminescence decay curves are measured, and the lifetimes become short with the Eu³⁺ content increasing. The decreasing Gd³⁺ lifetimes also indicates that there exists efficient energy transfer between Gd³⁺ and Eu³⁺ ions.     

Spectroscopic study of ZnO doped CeO2-PbO-B2O3 glasses

Glass samples of compositions xZnO-xCeO₂-(30−x)PbO-(70−x)B₂O₃ with x varying from 2% to 10% mole fraction are prepared by the melt quench technique. The structural and optical analysis of glasses is carried out by XRD, FTIR, density and UV-visible spectroscopic measurement techniques. The FTIR spectral analysis indicates that with the addition of ZnO contents in glass network, structural units of BO₃ are transformed into BO₄. It has been observed in our previous work that band gap decreases from 2.89 to 2.30 eV for CeO₂-PbO-B₂O₃ glasses with cerium content varying from 0% to 10% [Gurinder Pal Singh, Davinder Paul Singh, Physica B 406(3) (2011) 640-644]. With the incorporation of zinc in CeO₂-PbO-B₂O₃ glasses, the optical band gap energy decreases further from 2.38 to 2.03 eV. This causes more compaction of the borate network, which results in an increase of density (3.39-4.02 g/cm³). Transmittance shows that ZnO in glass samples acts as a reducing agent thathelps to convert Ce⁴⁺→Ce³⁺ ions.     

Structural, optical and scintillation properties of cerium cyclotriphosphates and polyphosphates

The cerium cyclotriphosphate CeP₃O₉·3H₂O and polyphosphate Ce(PO₃)₃ have been optically investigated for the first time. In both materials, excitation and emission spectra under UV and X-ray excitations as well as emission decays of Ce³⁺ were measured at room temperature. The spectroscopic results of anhydrous Ce(PO₃)₃, prepared by progressively heating the corresponding CeP₃O₉. 3H₂O, are discussed and correlated with the structural data.For the Ce(PO₃)₃ polyphosphate material, the Stokes shift of the d-f emission is very small (760 cm⁻¹), inducing an efficient ultraviolet luminescence and a new application as scintillator.     

On the Luminescence of Ce<Superscript>3+</Superscript>, Eu<Superscript>3+</Superscript>, and Tb<Superscript>3+</Superscript> in Novel Borate LiSr<Subscript>4</Subscript>(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>

This paper reports on the photoluminescence (PL) and time-resolved properties of Ce³⁺, Eu³⁺, and Tb³⁺ in novel LiSr₄(BO₃)₃ powder phosphors. Ce³⁺ shows an emission band peaking at 420 nm under 350-nm UV excitation. Energy transfer from Ce³⁺ to Mn²⁺ takes place in the co-doped samples. Eu³⁺ shows red emission under near UV excitation. LiSr₄(BO₃)₃:Eu³⁺ phosphor could be a suitable candidate for phosphor-converted solid state lighting. The luminescence lifetime is 2.13 ms for Eu³⁺ in LiSr₄(BO₃)₃:0.001Eu³⁺. As Eu³⁺ concentration increasing, the decay curves deviate from exponential behavior. Tb³⁺ shows the strongest ⁵D₄→⁷ F₅ emission line at 540 nm. Decay curves of ⁵D₄→⁷ F₅ and ⁵D₃→⁷ F₅ emission with different Tb³⁺ concentrations were also measured. Cross-relaxation process is discussed based on the decay curves.