Determination of different oxidation states of arsenic and selenium by inductively coupled plasma-atomic emission spectrometry with ion chromatography

Recent regulation in Japan requires more sensitive trace analysis methods for the determination of arsenic and selenium and their oxidation states As(III) and (V), Se(IV) and (VI). The hydride generation (HG) technique is usually used in combination with AAS and ICP-AES to increase sensitivity. However, hydrochloric acid is mostly used to acidify the sample solution in HG. Isobaric interferences due to chlorine-related species cause mass spectral problems when the same solution is used for the determination of these elements by ICP-MS. In this study, different oxidation states of As and Se were determined by coupling ion chromatography (IC) to an ICP-AES instrument. An HG technique was used to introduce test samples into the ICP. Nitric acid was employed to acidify the samples for HG. The concentrations of acid and base were kept as low as possible to reduce contamination. The formation of As and Se hydrides could be achieved without HCl, if the concentrations of acid and alkaline solutions were optimized. However, HCl was necessary for additional reduction of Se(VI) to Se(IV).     

电感耦合等离子体原子发射光谱法测定铈矿中微量的砷、锑

采用过氧化钠熔融试样，用盐酸调节试液酸度，对电感耦合等离子体原子发射光谱（ICP－AES）法同时测定铈矿中微量砷和锑进行了研究，考察了铈基体及共存元素，试液酸度及介质等因素对砷和锑的光谱和非光谱影响。     

Determination of arsenic species by inductively coupled plasma mass spectrometry with ion chromatography

Five arsenic species, trimethylarsine oxide, dimethylarsenic acid, monomethylarsonic acid, arsenobetaine and sodium arsenite, in urine were analysed by inductively coupled plasma mass spectrometry with ion chromatography (IC ICP MS). Since the toxicities of different arsenic compounds are different, speciation of arsenic compounds is very important in the investigation of metabolisms. In this paper, we applied ion chromatography (IC) as a separation device and inductively coupled plasma mass spectrometry (ICP MS) as a detection device. For separation of the five arsenic compounds, an anion-exchange column and, as mobile phase, tartaric acid were used. The eluent from the IC column was introduced directly into the nebulizer of the ICP MS and analysed at 75 amu. Detection limits were from 4 to 9 pg as arsenic.     

Speciation of arsenic(III) and arsenic(V) by inductively coupled plasma-atomic emission spectrometry coupled with preconcentration system

A novel and simple flow-based method was developed for the simultaneous determination of As(III) and As(V) in freshwater samples. Two miniature columns with a solid phase anion exchange resin, placed on two 6-way valves were utilized for the solid-phase collection/concentration of arsenic(III) and arsenic(V), respectively. As(III) could be retained on the column after its oxidation to As(V) species with an oxidizing agent. The collected analytes were then sequentially eluted by 2 M nitric acid and introduced into ICP-AES. Potassium permanganate was examined as potential oxidizing agent for conversion of As(III) to As(V). The standard deviation of the analytical signals (peak height) for the replicate analysis (n = 5) of 0.5 μg l⁻¹ solution were 3 and 5% for As(III) and As(V), respectively. The limit of detection (3σ) for both As(III) and As(V) were 0.1 μg l⁻¹. The proposed system produced satisfactory results on the application to the direct analysis of inorganic arsenic species in freshwater samples.     

电感耦合等离子体原子发射光谱法测定自来水中的8种元素

采用电感耦合等离子体原子发射光谱法(ICP-AES)测定了化学实验室自来水中铝、钾、锶、钡、锰、钴、钼、硒8种元素的含量;对仪器的工作条件进行了优化,确定了各元素的分析波长和检出限.结果表明,所述方法可以方便地用于测定化学实验室自来水样品中的8种元素,相对标准偏差为0.08%～6.90%.     

Determination of impurities in highly pure platinum by inductively coupled plasma-atomic emission spectrometry

In this work, a cyclone spray chamber system is used in conjunction with an inductively coupled plasma-atomic emission spectrometer instead of the conventional Scott-type chamber system to reduce the lower limit of detection achieved by the instrument, and an internal standard element (Y) is introduced to eliminate the effects caused by the drift in the plasma background level. An ICP-AES method for the determination of 13 impurity elements in a highly pure platinum sample has been developed. In this method, it is not necessary either to add a platinum matrix to the calibration standard or to separate and concentrate the elements to be determined in the samples. The effect of the platinum matrix on the elements to be analyzed is corrected for by a background equivalent concentration subtraction method. The determination ranges of the method are as follows: 0.00010-0.0050% for Mg, Mn, Cu, Ag, Fe and Zn; 0.00030-0.015% for Au, Ir, Ni and Pb; 0.00050-0.025% for Rh and Al; and 0.00080-0.040% for Pd. The method is simple, rapid and accurate, and can be applied to the analysis of 99.9–99.995% pure platinum.     

A novel bottom-viewed inductively coupled plasma-atomic emission spectrometry

A novel optical configuration for inductively coupled plasma (ICP)-atomic emission spectrometry is presented. Plasma emission is measured axially via the bottom end of the ICP torch. Analytical performance, such as increase in signal-to-background ratio (SBR) over radially viewed ICP and linear dynamic range, is comparable to that of end-on axially viewed ICP reported in the literatures. Under typical ICP operating conditions (forward power=1.0–1.6 kW, central channel gas flow rate=0.8–1.4 l/min), SBR is generally five times or more that of radial-viewing mode (observation heights=3–20 mm) for atomic lines of elements of low to medium ionization potential (Na, K, Sr and Ba). The enhancement factor in SBR is two to four times for ionic lines (e.g. MgII) and atomic lines of elements of high ionization potential (Zn). The influence of ICP forward power and carrier gas flow rate on analyte emission intensity and SBR were also studied. Similar to radially viewed ICP, as forward power increases, the net emission intensity increases and SBR decreases. Using a constant flux of analyte aerosols, the net intensity decreases as the central channel gas flow rate increases. No trend of SBR vs. central channel gas flow rate, however, is found. The linear dynamic range starts and ends at analyte concentration 0.5–1 order of magnitude lower than the corresponding radial-viewing mode. As a result, the span of linear dynamic range is similar for all viewing modes. Matrix effects of K and Ca on atomic lines are different from those reported for end-on axially viewed ICPs, probably due to the difference in the plasma regions that were probed. The matrix effects on ionic lines, however, are similar in magnitude.     

Determination of arsenic in homeopathic drugs by bromide volatilization-inductively coupled plasma-atomic emission spectrometry

Arsenic in homeopathic drugs was determined by coupling a volatile generation with inductively coupled plasma-atomic emission spectrometry. The method is based on the chemical vaporization of arsenic(III) with bromide ions in sulfuric acid media using a batch procedure and subsequent introduction of the gaseous analyte into the plasma torch. The main and interactive effects of the experimental variables affecting this method were evaluated by a 2-level full factorial design. In optimized conditions by Simplex, the method shows an absolute detection limit (3 s) of 0.28 microg for the injection of 230 microL sample. The precision (% relative standard deviation) of the determination was 4.2% at a level of 50 microg/mL As(III) (n = 5). The interference effect of various ions on the arsenic signal was evaluated.     

Determination of arsenic and selenium in environmental samples by hydride generation-direct current plasma-atomic emission spectrometry

Hydride generation-direct current plasma-atomic emission spectrometry has been shown to be a simple and rapid procedure for the determination of arsenic and selenium in environmental samples, offering acceptable accuracy and precision. Simplex optimization of the operating parameters showed typical DCP operating conditions and a hydrochloric acid concentration of 6 mol liter⁻¹ to be optimal. The detection limit for both elements was 4 ng ml⁻¹.     

Development and characterization of bottom-viewed inductively coupled plasma-atomic emission spectrometry

In bottom-viewed inductively coupled plasma-atomic emission spectrometry (BV-ICP-AES), emission from the central channel of the plasma is measured axially from the bottom of the plasma. A straight quartz tube was used as a hollow light pipe (HLP) to collect plasma emission in this study. The HLP also serves as an injector for aerosols transport and injection into the ICP. The optical characteristics of HLPs with the original reflective surface and roughened outer surface are reported. The roughened HLP is effective in rejecting light beams that are not in line with the HLP. The transmission efficiency of the HLP, however, is high (> 70%) for light beams from a source that has the same dimension as the entrance of the HLP and is flush with the HLP. The HLP is effective in rejecting background emission from the core of the plasma that encircles the plasma central channel and yet efficient in light collection from the central channel of the plasma.     

Characterization of an aluminium(III)–citrate species by means of ion chromatography with inductively coupled plasma-atomic emission spectrometry detection

The aluminium(III)–citrate complex (NH₄)₄[Al₂(C₆H₄O₇)(C₆H₅O₇)₂]·4H₂O was characterized using anion exchange chromatography on-line coupled with the element specific ICP-AES detector. Time-dependent monitoring of individual species in aqueous solution at different temperatures gave information about the species stability and the decomposition pathway. The aluminium–citrate complex (NH₄)₄[Al₂(C₆H₄O₇)(C₆H₅O₇)₂]·4H₂O disintegrated via an unknown intermediary Al(III)–citrate species from which the thermodynamically stable complex [Al₃(C₆H₄O₇)₃(OH)(H₂O)]⁴⁻ was formed. The activation energy for the decomposition reaction and the pre-exponential factor were determinated to be E_a = 81.95 kJ mol⁻¹ and A = 3.62 × 10¹³ s⁻¹.     

Miniature hydride generator system for inductively coupled plasma-atomic emission spectrometry

Conclusion The detachable miniature hydride generator presented in this work gives the analytical chemist easy access to the determination of ultratrace levels of tin and germanium using a 1.2 kW-ICP spectrometer commercially available. An improvement of the detection limits of approximately 100 times those for conventional pneumatic nebulizer-ICP-AES, has been reported in this work.     

Determination of different arsenic species in food‐grade spirulina powder by ion chromatography combined with inductively coupled plasma mass spectrometry

A “two‐step” pressurized microwave‐assisted extraction method coupled with ion chromatography with inductively coupled plasma mass spectrometry for the determination of different arsenic species in spirulina samples was developed. The extraction method used H₂O₂/H₂O (1:5, v/v) as solvent to extract all arsenic species except arsenite, which was extracted by using water as solvent. The extraction method had a satisfactory recovery (>96%) and took a short time (20.0 min). With our method, all arsenic species in spirulina samples were completely separated and determined with recoveries of 84–105% and relative standard deviations of 2–4%. Food‐grade spirulina powder samples from seven provinces (Inner Mongolia, Zhejiang, Fujian, Hainan, Yunnan, Jiangsu, and Guangxi) in China were analyzed using the optimized protocol. Arsenate was detected at the concentration range of 170–394 ng/g in all the spirulina samples. Dimethylarsinic acid was detected at the concentration range of 32–839 ng/g in spirulina from above‐six provinces except Guangxi. Monomethylarsonic acid (67 ± 3 ng/g) was detected only in spirulina from Yunnan province. Arsenite was detected at the concentration range of 28–147 ng/g in spirulina from above five provinces except Hainan and Guangxi. Five unknown organic arsenic species were found in spirulina from above six provinces except Guangxi.     

Speciation of arsenic by ion chromatography inductively coupled plasma mass spectrometry using ammonium eluents

A method based on ion chromatography (IC) and inductively coupled plasma MS (ICP-MS) was developed for the speciation of arsenic in water and soil extracts. An anion-exchange column (G3154A/101) was used to separate As(III), As(V), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) with excellent resolution. Various ammonium salts, including NH4H2PO4, (NH4)2HPO4, (NH4)2CO3, and NH4HCO3, were examined as eluents to reduce matrix interference from chloride and to solve clogging problems. The best arsenic speciation was obtained within 9 min with excellent resolution and without interference from high chloride concentrations using an eluent containing 7.5 mM (NH4)2HPO4 at pH 7.9. The detection limits for the target arsenic species ranged from 0.1 to 0.4 microg/L with direct injection of sample without matrix elimination. The proposed method was effectively demonstrated by determining arsenic species in contaminated waters and soils of Bangladesh.     

Erbium determination in preforms of optical fibres by inductively coupled plasma-atomic emission spectrometry

Erbium which is used in the composition of heavy metal fluoride optical fibres was determined in preforms of these materials by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The new analytical procedure developed comprises: solid sample dissolution, via an alkaline fusion with sodium carbonate, and acid leaching with dilute hydrochloric acid, and measurements of emission intensities of 337.276 nm. This method has a detection limit of 31 ng/ml and a reproducibility of 0.90% r.s.d.     

Qualities related to spectra acquisition in inductively coupled plasma-atomic emission spectrometry

As many elements emit line-rich spectra in ICP-AES, the role of the resolution of the dispersive system has been considered as crucial not only to minimize spectral interferences but also to improve signal-to-background ratios. Resolution is mainly based on the line width measured at half of the peak intensity. Because of the availability of modern gratings, the practical resolution is no longer limited by the diffraction patterns produced by the grating, but is mainly bandpass and optical aberration limited. High resolutions of 5 pm may be obtained in the UV, which has to be compared with the physical line widths in the range 1–6 pm. However, such a high resolution cannot be achieved in the visible region because it is no longer possible to use a high line number for conventional gratings and high diffraction orders for echelle gratings. Moreover, the resolution concept does not consider the line wings, which are of concern for background correction. It is then suggested a measurement of the line profile at 1% of the peak intensity and a comparison with that measured at 50%. Because of the current possibility to have acquisition of the entire, or at least large portions of the UV-visible spectra, wavelength reproducibility may become the most important parameter to facilitate data processing such as spectra addition and subtraction, filtering, deconvolution and line correlation.     

Determination of selenium in blood serum by inductively coupled plasma atomic emission spectrometry with pneumatic nebulization

The possibility of determining selenium in blood serum using inductively coupled plasma emission spectrometry with conventional pneumatic nebulization was studied. A high-resolution spectrometer (SBW=6 pm) with laterally viewed ICP was employed. Analysis with conventional pneumatic nebulization could overcome laborious and demanding digestion, which is necessary for hydride generation. A pressure digestion with nitric acid at 160 degrees C was sufficient to decrease the carbon content in the serum sample to 5%-10% of its original value. Spectral interference of the CN band was observed and mathematically corrected. It was found that the carbon-induced selenium line emission enhancement occurred even under ICP optimized conditions. A method of determination was developed and applied to the analysis of blood serum. True limit of detection in real samples is 0.01-0.02 mg/L and the limit of quantification (RSD 10%) is 0.03-0.07 mg/L using Se I 196.090 nm line at an integration time of 10-2 s. The method was tested by analysis of porcine blood serum and the serum reference material Seronorm MI 0181.     

Evaluation of spray chambers for use in inductively coupled plasma-atomic emission spectrometry

A laboratory-built spray chamber featuring aerosol collection at the centre of the chamber by means of a funnel is described and compared with a commercially available, dual tube chamber. The influence of some chamber design parameters on the emission signal intensity and stability, the nebulizer efficiency and chamber clean-out time is studied.     

Determination of selenium and tellurium compounds in biological samples by ion chromatography dynamic reaction cell inductively coupled plasma mass spectrometry

An ion chromatography-inductively coupled plasma mass spectrometric (IC-ICP-MS) method for the speciation of selenium and tellurium compounds namely selenite [Se(IV)], selenate [Se(VI)], Se-methylselenocysteine (MeSeCys), selenomethione (SeMet), tellurite [Te(IV)] and tellurate [Te(VI)] is described. Chromatographic separation is performed in gradient elution mode using 0.5 mmol L(-1) ammonium citrate in 2% methanol (pH 3.7) and 20 mmol L(-1) ammonium citrate in 2% methanol (pH 8.0). The analyses are carried out using dynamic reaction cell (DRC) ICP-MS. The DRC conditions have also been optimized to obtain interference free measurements of (78)Se(+) and (80)Se(+) which are otherwise interfered by (38)Ar(40)Ar(+) and (40)Ar(40)Ar(+), respectively. The detection limits of the procedure are in the range 0.01-0.03 ng Se mL(-1) and 0.01-0.08 ng Te mL(-1), respectively. The accuracy of the method has been verified by comparing the sum of the concentrations of individual species obtained by the present procedure with the total concentration of the elements in two NIST SRMs Whole Milk Powder RM 8435 and Rice Flour SRM 1568a. The selenium and tellurium species are extracted from milk powder and rice flour samples by using Protease XIV at 70 degrees C on a water bath for 30 min.