铁磁梁式板磁弹性初始后屈曲及缺陷敏感性分析

从铁磁板的磁弹性广义变分原理出发，通过对铁磁板内外的磁场和板变形 场的摄动技术以及采用经典Koiter理论，对横向磁场中铁磁悬臂、简支、固支梁式薄 板磁弹性稳定性的初始后屈曲行为及缺陷敏感性进行了定性研究. 解析地给出了悬臂板对初 始缺陷敏感，简支和固支板对初始缺陷不敏感等结果，对悬臂梁式板理论预测的临界磁场值 往往大于实验观测结果的现象从定性上给予了合理解释.     

用广义样条子域法分析具有环形初始几何缺陷的圆柱壳

基于壳体初挠曲理论,对具有环形初始几何缺陷的圆柱壳进行了静力分析。整个缺陷区段视为由若干斜锥段组成。利用广义样条子域法建立了位移模式,该模式具有自由度少,结点设置灵活之特点。计算结果与有限元计算所得结果基本吻合。     

A theoretical model of magnetoelastic bucking for soft ferromagnetic thin plates

As an essential model of magnetoelastic interaction between magnetic field and mechanical deformation, the study on magnetoelastic buckling phenomenon of soft ferromagnetic plates in a magnetic environment has been conducted. One of the key steps for the theoretical prediction of the critical magnetic field is how to formulate magnetic force exerted on the magnetized medium. Till today, the theoretical predictions, from theoretical models in publications, of the magnetoelastic buckling of ferromagnetic cantilevered beam-plate in transverse magnetic field are all higher than their experimental data. Sometimes, the discrepancy between them is as high as 100%. In this paper, the macroscope formulation of the magnetic forces is strictly obtained from the microscope Amperion current model. After that, a new theoretical model is established to describe the magnetoelastic buckling phenomenon of ferromagnetic thin plates with geometrically nonlinear deformation in a nonuniform transverse magnetic field. The numerical method for quantitative analysis is employed by combining the finite elemental method for magnetic fields and the finite difference method for deformation of plates. The numerical results obtained from this new theoretical model show that the theoretical predictions of critical values of the buckling magnetic field for the ferromagnetic cantilevered beam-plate are in excellent agreement with their experimental data. By the way, the region of applicability to the Moon-Pao's model, or the couple model, is checked by quantitative results. This project was supported in part by the National Natural Science Foundation of China and the Foundation of the SEdC of China for Returned Chinese Scholars from Abroad.     

Buckling of thin-walled columns accounting for initial geometrical imperfections

The paper is devoted to the effect of some geometrical imperfections on the critical buckling load of axially compressed thin-walled I-columns. The analytical formulas for the critical torsional and flexural buckling loads accounting for the initial curvature of the column axis or the twist angle respectively are derived. The classical assumptions of theory of thin-walled beams with non-deformable cross-sections are adopted. The non-linear differential equations are derived and the critical buckling loads are approximated by means of the Galerkin’s method. Comparison of analytical results to numerical analysis of simply supported I-columns by means of finite element method (FEM) is provided. Moreover the analytical formulas is adapted to I-columns with lipped flanges and satisfactory agreement of analytical and numerical results of stability analysis is observed.     

随机边界弹性约束空间预应力钢桁架随机内力摄动分析

本文在文献[2]-[4]的基础上,进一步建立了具有任意弹性约束的拉索式空间预应力钢桁架计算模型,其中所有弹性约束均由一组弹簧模拟,在此基础上考虑到边界弹性约束刚度的随机性,进一步建立了拉索式预应力空间钢桁架随机内力摄动分析的计算公式,并针对三角形立体钢桁架进行了分析,为预应力立体钢桁架的可靠性研究奠定了一定的理论基础。     

Two-dimensional buckling problem for a composite reinforced with a periodic row of collinear short fibers

A solution is found to the two-dimensional buckling problem for a composite material reinforced with a periodic row of collinear short fibers and compressed along the fibers. The problem formulation is based on the piecewise-homogeneous model and the three-dimensional theory of stability of deformable bodies. The dependence of the critical strain and buckling mode on the fiber spacing is studied for various material and geometrical characteristics of the composite components __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 6, pp. 90–100, June 2006.     

An improved HSFR method for natural vibration analysis of an immersed cylinder pile with a tip mass

Immersed cylinder piles are usually modelled as immersed cantilever cylinder columns carrying a tip mass and rotary moment of inertia. In this paper, the equations of motion of an immersed cylinder pile along transversal modes of vibration are developed. Compressibility of water and structural damping are included in the formulation. Natural frequencies of the immersed pile are obtained from the developed equations using harmonic sweep frequency response analyses. The proposed method is applied to numerical examples, and the results obtained are shown satisfactory when compared to other numerical solutions in the literature, or to finite element solutions and experimental data.     

拉压性能不同材料全量型本构关系及厚壁筒的应力分析

将经典全量理论作了推广，考虑了应力状态及塑性体积变形对拉压性能不同材料的塑性行为的影响。应用该本构模型分别计算了厚壁筒在内压和外压作用下的应力分布。给出了径向应力、环向应力和轴向应力沿壁厚的分布图。将本文的计算解与拉压性能相同(不考虑体积变形、强化曲线唯一)的幂函数强化材料的厚壁筒的理论解进行了比较。结果表明，材料的拉压性能不同对厚壁筒的环向应力和轴向应力影响较大。因此，对于拉压性能不同材料，考虑到其对应力状态及塑性体积变形敏感时，是不能将其简化成拉压性能相同、体积不可压缩、强化曲线唯一的理想材料。