纳米TiO2/聚N-异丙基丙烯酰胺复合水凝胶的合成及其表征

通过利用偶联剂和超声分散将TiO₂表面功能化, 在其表面引入烯键, 与聚N-异丙基丙烯酰胺在交联剂存在下共聚, 制备了不同纳米TiO₂含量的聚N-异丙基丙烯酰胺复合水凝胶．采用红外光谱、扫描电镜、紫外光谱、热重分析、动态粘弹谱仪等表征了复合水凝胶的微观结构和形貌, 测试了复合凝胶材料对紫外线的吸收、热稳定性、机械强度及其韧性. 结果表明: 纳米TiO₂粒子的引入, 使得复合凝胶材料对紫外线吸收效果显著, 凝胶的稳定性、机械强度及韧性得到明显改善.     

LaSrCo0.9B’0.1O4复合氧化物制备、氧化性能及表征

采用聚丙烯酰胺法制备了类钙钛矿LaSrCo_0.9B’_0.1O₄系列复合氧化物(B’= Mn、Fe、Ni、Cu)和LaSrCoO₄,并考察了对CO和C₃H₈催化氧化反应的活性,运用XRD、BET、TEM、TPD等方法对LaSrCo_0.9Ni_0.1O₄、LaSrCoO₄进行了表征.结果表明, LaSrCo_0.9Ni_0.1O₄和LaSrCoO₄都为四方K₂NiF₄型纳米材料. Ni的掺入提高了LaSrCoO₄的催化活性、O₂的吸附量和晶格畸变率,降低了平均晶粒度.     

纳米TiO2/聚N-异丙基丙烯酰胺复合水凝胶的合成及其表征

通过利用偶联剂和超声分散将TiO₂表面功能化, 在其表面引入烯键, 与聚N-异丙基丙烯酰胺在交联剂存在下共聚, 制备了不同纳米TiO₂含量的聚N-异丙基丙烯酰胺复合水凝胶．采用红外光谱、扫描电镜、紫外光谱、热重分析、动态粘弹谱仪等表征了复合水凝胶的微观结构和形貌, 测试了复合凝胶材料对紫外线的吸收、热稳定性、机械强度及其韧性. 结果表明: 纳米TiO₂粒子的引入, 使得复合凝胶材料对紫外线吸收效果显著, 凝胶的稳定性、机械强度及韧性得到明显改善.     

钐(II)类卡宾CH3SmCH2I与乙烯环丙烷化反应及溶剂化效应的理论研究

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理. 对钐类卡宾试剂CH₃SmCH₂I和CH₂CH₂反应的反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化, 并计算了THF溶液的溶剂化效应, 用内禀反应坐标(IRC)计算和频率分析方法, 对过渡态进行了验证. 结果表明: CH₃SmCH₂I与CH₂CH₂环丙烷化反应按亚甲基转移机理(通道A)和卡宾金属化机理(通道B)都可以进行, 与锂类卡宾的反应机理相同, 通道A比通道B反应的势垒降低了14.65 kJ/mol. 溶剂化效应使通道B比通道A的反应势垒大幅度提高, 更有利于反应沿通道A进行, 而不利于通道B.     

钐(II)类卡宾CH3SmCH2I与乙烯环丙烷化反应及溶剂化效应的理论研究

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理. 对钐类卡宾试剂CH₃SmCH₂I和CH₂CH₂反应的反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化, 并计算了THF溶液的溶剂化效应, 用内禀反应坐标(IRC)计算和频率分析方法, 对过渡态进行了验证. 结果表明: CH₃SmCH₂I与CH₂CH₂环丙烷化反应按亚甲基转移机理(通道A)和卡宾金属化机理(通道B)都可以进行, 与锂类卡宾的反应机理相同, 通道A比通道B反应的势垒降低了14.65 kJ/mol. 溶剂化效应使通道B比通道A的反应势垒大幅度提高, 更有利于反应沿通道A进行, 而不利于通道B.     

Ru(II)染料与聚3-甲基噻吩复合敏化纳米结构TiO2电极的光电化学研究

利用光电流作用谱、循环伏安等光电化学方法研究了染料RuL₂(SCN)₂: 2TBA (L＝2,2'-bipydine-4,4'-dicarboxylic acid)与聚3-甲基噻吩(P3MT)复合敏化电极的光电化学性质. RuL₂(SCN)₂: 2TBA/P3MT复合敏化TiO₂纳米晶多孔膜电极比染料RuL₂(SCN)₂: 2TBA敏化TiO₂纳米结构电极的光电转换效率大幅度提高. 复合敏化电极中存在p-n异质结有效地抑制了电子的反向复合, 减少了电子的损失.     

Ru(II)染料与聚3-甲基噻吩复合敏化纳米结构TiO2电极的光电化学研究

利用光电流作用谱、循环伏安等光电化学方法研究了染料RuL₂(SCN)₂: 2TBA (L＝2,2'-bipydine-4,4'-dicarboxylic acid)与聚3-甲基噻吩(P3MT)复合敏化电极的光电化学性质. RuL₂(SCN)₂: 2TBA/P3MT复合敏化TiO₂纳米晶多孔膜电极比染料RuL₂(SCN)₂: 2TBA敏化TiO₂纳米结构电极的光电转换效率大幅度提高. 复合敏化电极中存在p-n异质结有效地抑制了电子的反向复合, 减少了电子的损失.     

采用连续电位阶跃方法研究聚吡咯在电解质水溶液中的氧化还原稳定性

连续电位阶跃方法是一种研究氧化还原稳定性的有效方法. 本文采用连续电位阶跃方法研究了以对甲苯磺酸钠为掺杂剂的聚吡咯(ppy)膜的电化学氧化还原稳定性, 通过计算聚吡咯在阶跃电位下的还原电量(Q_red), 还原和氧化电量的比值(Q_red/Q_ox)考察聚吡咯在H₂SO₄、Na₂SO₄和NaOH溶液中在不同电位下的氧化还原可逆性. 结果发现聚吡咯过氧化的发生强烈依赖支持电解质的pH值和阶跃电位. 在H₂SO₄溶液中, 过氧化的起始电位为0.8 V, 而在Na₂SO₄溶液中, 过氧化的起始电位为0.5 V. 在NaOH溶液中, 过氧化在任何电位均可发生, 表明溶液中OH^- 的存在是过氧化发生的直接原因.     

X射线荧光光谱法快速测定灰岩样品中主、次量组分

采用粉末压片制样,利用岛津1800型X 射线荧光光谱分析仪,对石灰石、白云石等灰岩类标准物质拟合校准曲线,建立了 X 射线荧光光谱法(XRF)同时测定石灰石、白云石样品中主次量组分(SiO₂、Al₂O₃、TFe₂O₃、MgO、CaO、K₂O、Na₂O、MnO、P)的快速分析方法。通过试验确定了样品粒度要达到74μm以下,30t压力下制片。通过灼烧减量对SiO₂、Al₂O₃、TFe₂O₃、MgO、CaO 含量进行校正,根据其含量与强度的对应关系绘制校准曲线,采用经验系数法可减小元素间的增强-吸收效应。对灰岩类试样进行精密度考察,各组分含量的相对标准偏差 RSD＜2%;对石灰石和白云石标准样品和实际样品进行准确度考察,测定值与标准推荐值或传统方法的测定值一致。     

γ-MnO2的形貌控制及其甲苯液相氧化性能

通过在回流法制备流程中引入CTAB(十六烷基三甲基溴化铵)、PEG6000(聚乙二醇6000)及P123(聚环氧乙烷-聚环氧丙烷-聚环氧乙烷三嵌段共聚物)等表面活性剂对γ-MnO₂催化剂进行形貌控制, 同时采用X射线衍射(XRD)、扫描电镜(SEM)、N₂吸附(BET)、热重分析(TGA)、O₂程序升温脱附(O₂-TPD)以及H₂程序升温还原(H₂-TPR)等技术对不同形貌γ-MnO₂的结构、氧脱附及还原性能进行表征, 并考察了其在常压和无溶剂条件下甲苯选择性氧化反应体系的催化特性. 同时, 对于陈化时间对形貌的影响作用进行了考察. 结果表明: 不同形貌的γ-MnO₂的氧化还原特征及催化活性存在显著差异, 其中在经PEG6000进行修饰的γ-MnO₂中含有较多的阴离子空位及混合价态, 因此有助于分子氧在表面的活化, 具有较高的表面比活性; 而经P123进行表面修饰的γ-MnO₂成晶结构规整、比表面积大, 对甲苯液相直接氧化反应则表现出最佳的质量比活性, 甲苯转化率达18.1%, 含氧化合物总选择性为87.4%, 其中苯甲酸的选择性达到73.2%.     

The mechanism of lipopolysaccharide infiltration through HUVEC membrane surface in direct endotoxin injury

In this study, the HUVEC's cellular biomechanical properties of HUVEC (elastic modulus K₁, K₂ and viscoefficient μ) were determined with micropipette aspiration system and analyzed after being directly damaged with lipopolysaccharide (LPS). The phospholipid compositions of HUVEC membrane were analyzed with high-performance capillary electrophoresis and PLA₂ activity was determined to research the modification and metabolism of HUVEC membrane phospholipid. Infiltration of LPS on HUVEC membrane was studied by observation with confocal microscopy and fluorescent microscopy. Results showed that LPS direct injuring HUVEC can cause the changes of HUVEC biomechanical properties and membrane lipid contents; HUVEC directly damage by LPS could also activate HUVEC phospholipase A₂ (PLA₂), influencing membrane lipid metabolism; LPS could directly infiltrate and intercalate HUVEC membrane, causing and membrane contents variation. Based on these experimental results, the mechanism of lipopolysaccharide infiltration VEC membrane surface in direct LPS injury was studied and analyzed in view of the cellular biomechanical mechanism.     

Angular momentum polarization in molecular beams of I2 and Na2

The degree of molecular alignment, due to nozzle expansion, has been determined in supersonic beams of I₂ and Na₂, using the technique of laser-induced fluorescence. It is found that the anisotropic distribution of angular momenta is of the form 1 + ₂P₂(cos ). The alignment appears to be small for I₂ while for Na₂ a considerably larger effect is measured. Two internal states are studied, v = 0, J = 28 and v = 3, J = 43; both under various source conditions. It is found that the alignment depends on the internal state of the molecule and for each state can be described as a unique function of pd, the product of source pressure and nozzle diameter. The results are explained using a moel based on scattering between atoms and dimers with different velocity distributions. It is suggested that alignment may be a general feature in seeded molecular beams containing nonspherical components.     

Removal of heavy metal ions from aqueous solutions by alkaline-earth metal phosphates

The possibility of utilization of calcium or magnesium phosphates of various composition for heavy and non-ferrous metal extraction from aqueous solutions has been studied. The efficiency of the phosphates in removal of Pb(II), Cr(III) and Fe(III) ions has been shown to decrease in the following sequence: Mg₃(PO₄)₂>MgNH₄PO₄>Ca₃(PO₄)₂>CaHPO₄>Ca₁₀(PO₄)₆(OH)₂ which is inverse to their hydrolytic stability series. It has been established that phosphates of non-apatite structure are capable of binding up to 12 mmol g⁻¹ of the named heavy metals by a chemical interaction. Hydroxyapatite interacts with the polyvalent metal ions via either the above mentioned or ion-exchange mechanism, depending on preparation method used for the apatite and the nature of metal.     

The weiss constant: A probe for the molecular packing of monomeric copper(II) complexes?

Magnetic properties of the complexes Cu(pn)₂WO₄1.8H₂O, Cu(pn)₂I₂, Cu(pn)₂Br₂ 1.6H₂O and Cu(pn)₂Cr₂O₇ (ph = 1,2-diaminopropane) have been studied by ESR, magnetic balance (Gouy method) and PA techniques. Curie constants C were obtained from ESR spectra, temperature independent paramagnetism N∝ from PA spectra, and Weiss constants from magnetic susceptibility data. Isotropic factors r were calculated, describing reduction of the orbital angular momentum and the spin-orbit coupling constant from their free-ion values. From the measured crystal g values we conclude that there is axial elongation in all the coordination polyhedra, corresponding to the ground state d_x2-y2. The different line shapes in the ESR spectra depend on the alignment of the pseudo-tetragonal axes, induced by the counterion. The counterions have a clear effect on both the magnetic parameters and the reduction factors. The alignment of the pseudotetragonal axes is also reflected in the value of the Weiss constant. A correlation is proposed between the Weiss constant and molecular packing.     

Investigation of POM Reaction Over Rh/SiO2 Catalyst Using XPS

By means of XPS, the binding energy and the concentration of the surface element were characterized, before and after the catalyst was exposed to CH₄ and/or O₂ at different temperature (from room temperature to 773 K) and at different amounts with different sequence. It was found that CH_x(x=l~3) species were formed over the catalyst closed to CH₄ or CH₄/O₂. For CH₃,CH₂ and CH species, the C_1Sbinding energies were ca. 285.5 eV, 284.5 eV and 283.5 eV, respectively.     

Interaction of antitumor drug Sn(CH3)2Cl2 with DNA and RNA

Sn(CH₃)₂Cl₂ exerts its antitumor activity in a specific way. Unlike anticancer cis-Pt(NH₃)₂Cl₂ drug which binds strongly to the nitrogen atoms of DNA bases, Sn(CH₃)₂Cl₂ shows no major affinity towards base binding. Thus, the mechanism of action by which tinorganometallic compounds exert antitumor activity would be different from that of the cisplatin drug. The aim of this study was to examine the binding of Sn(CH₃)₂Cl₂ with calf thymus DNA and yeast RNA in aqueous solutions at pH 7.1–6.6 with constant concentrations of DNA and RNA and various molar ratios of Sn(CH₃)₂Cl₂/DNA (phosphate) and Sn(CH₃)₂Cl₂/RNA of 1/40, 1/20, 1/10, 1/5. Fourier transform infrared (FTIR) and UV–visible difference spectroscopic methods were used to determine the Sn(CH₃)₂Cl₂ binding mode, binding constant, sequence selectivity and structural variations of Sn(CH₃)₂Cl₂/DNA and Sn(CH₃)₂Cl₂/RNA complexes in aqueous solution. Sn(CH₃)₂Cl₂ hydrolyzes in water to give Sn(CH₃)₂(OH)₂ and [Sn(CH₃)₂(OH)(H₂O)_n]⁺ species. Spectroscopic evidence showed that interaction occurred mainly through (CH₃)₂Sn(IV) hydroxide and polynucleotide backbone phosphate group with overall binding constant of K(Sn(CH₃)₂Cl₂–DNA)=1.47×10⁵ M⁻¹ and K(Sn(CH₃)₂Cl₂–RNA)=7.33×10⁵ M⁻¹. Sn(CH₃)₂Cl₂ induced no biopolymer conformational changes with DNA remaining in the B-family structure and RNA in A-conformation upon drug complexation.     

CuCrO2的合成及其复合催化剂的光催化性能

以硝酸铬和硝酸铜为原料,通过半湿法经两种不同路径合成了CuCrO₂半导体物质。分别采用热重-差示扫描（TG-DSC）、X射线衍射（XRD）、紫外-可见漫反射（UV-vis DR）、扫描电镜（SEM）及X射线光电子能谱（XPS）对样品进行了表征分析。确立了以氨水为Cr³⁺沉淀剂制得的氢氧化铬沉淀中加入硝酸铜溶液是合成CuCrO₂较适宜的路径。借助TG-DSC和XRD的分析结果确立前驱体在热处理的过程中,含Cr物相的变化历程为Cr（OH）₃ → CuCrO₄ → CuCr₂O₄ → CuCrO₂。通过机械研磨的方法合成了CuCrO₂-WO₃和CuCrO₂-ZnO复合型催化剂,对其进行了XRD、SEM和XPS表征分析,并测试了复合催化剂的光催化活性。结果表明,与单独使用CuCrO₂相比,无论是以高压汞灯,还是以氙灯为光源,CuCrO₂-WO₃和CuCrO₂-ZnO的光催化产氢活性都有显著提高。     

氨基修饰的金属有机框架Cu_3(BTC)_2的制备及其CO_2吸附性能研究

首先制备了嫁接氨基的均苯三甲酸,同时以其为原料通过溶剂热法合成了金属有机框架材料Cu_3(NH_2BTC)_2,利用XRD、N_2吸附-脱附、热重、红外、原位红外分析等表征手段对吸附剂进行了表征,并通过固定床测量穿透曲线的方法研究其CO_2吸附性能。结果表明,氨基被成功引入Cu_3(BTC)_2骨架中。氨基修饰的Cu_3(BTC)_2对CO_2有着较高的吸附容量,在10 kPa,50℃的条件下CO_2吸附量为1.41 mmol/g,这源于材料对于CO_2同时存在着物理吸附和化学吸附。     

NaBH4处理LaCuZnX(X=Zr、Al、Zr+Al)(类)钙钛矿型催化剂及其CO2加氢合成甲醇性能的研究

采用共沉淀法分别制备了不同F-T组分(Fe、Co、Ni)改性的KCuZrO_2催化剂,并用于催化CO加氢合成异丁醇。通过BET、XRD、TEM、XPS、H_2-TPR、CO-TPD以及in-situ DRIFTS对催化剂进行了表征。结果显示,F-T组分的加入促进了乙醇和丙醇的形成,但是对异丁醇选择性影响不同。结果表明,Fe促进了催化剂中各组分的分散,活性组分Cu在催化剂表面发生了富集,提高了H_2/CO活化吸附;另外,KFeCuZrO_2的催化剂表面含有较多的C_1物种,有利于乙醇和丙醇进一步发生β-加成反应得到异丁醇,而Co和Ni改性的催化剂上缺少足够的C_1物种,因此,异丁醇的选择性并未明显增加。Co的引入对催化剂结构以及Cu的分散影响不大,但是Co改性后催化剂性能有所下降,其原因是催化剂发生了失活;Ni添加后催化剂比表面积有所减小,且催化剂表面Cu/Zr物质的量比也降低到0.19,催化剂粒径增大,Cu-Zr之间相互作用减弱,异丁醇选择性降低。     

原位共沉淀法制备NiMg(Al)O/γ-Al2O3催化剂及其酯交换性能

以γ-Al₂O₃为载体通过原位共沉淀法制备NiMgAl-LDHs/γ-Al₂O₃,经焙烧后得到NiMg（Al）O/γ-Al₂O₃催化剂,通过TG-DTG、XRD、SEM、BET、FT-IR、CO₂-TPD等手段对催化剂进行了表征,并对其在酯交换制备生物柴油反应中的催化性能进行了研究。结果表明,NiMgAl-LDHs和NiMg（Al）O成功在γ-Al₂O₃内孔表面生长,并有良好的结合度。催化剂对酯交换具有很高的催化活性;在醇油物质的量比为12：1的条件下反应3 h,生物柴油产率为95%,重复使用七次后,生物柴油产率仍然在82%以上。