电感耦合等离子体原子发射光谱(ICP-AES)法测定锡铅焊料中11种微量元素

根据目前市场上常见锡铅焊料中主元素的特性(锡含量范围0.X%~95%,铅含量范围X%~99%),合理选择了有效的样品前处理方法。参考铸造锡铅焊料牌号及化学成分和仪器工作条件,确定了待测元素的测定范围。应用电感耦合等离子体原子发射光谱法同时测定锡铅焊料中锑、铋、铁、砷、铜、银、锌、铝、镉、磷、金11种元素的含量,方法操作简单。选择了合适的分析谱线,进行了基体元素对待测元素以及各待测元素之间的干扰研究,基体效应小,各待测元素之间基本无干扰,11次独立的测定数据相对标准偏差为1.0%~11.3%,方法的加标回收率为90.2%~105%。完全能满足现实生产中对锡铅焊料杂质元素的测定要求。     

氯化亚锡还原-原子荧光光谱法测定银精矿中汞

建立了原子荧光光谱法测定银精矿中汞的分析方法。试样经盐酸、硝酸溶解,在盐酸介质中,以盐酸(5%)为载流,氯化亚锡(200g/L)溶液为还原剂,用原子荧光光谱法测定银精矿样品中汞的含量。对仪器的最佳工作条件、还原剂的种类和浓度、样品溶样方式、共存元素的干扰等各方面进行了详细研究。结果表明,方法的相对标准偏差为3.1%~9.1%,与冷原子吸收光谱法测定结果相吻合。方法的准确度和精密度均能满足银精矿样品的检测需求,值得推广使用。     

锌粉-硼砂-硼酸熔融-碘酸钾滴定法测定高硅锡精矿中的锡

针对高硅锡精矿中锡的测定时通常用锌粉-氢氧化钠熔融,精密度差,不能满足分析要求的问题,建立了锌粉-硼砂-硼酸熔融,盐酸浸取,铝粒将锡还原,碘酸钾滴定法测定高硅锡精矿中锡的分析方法。方法结果稳定,精密度好,相对标准偏差在0.19%~0.55%,加标回收率在96.9%~105%。分析结果能够满足高硅锡精矿中锡的测定要求。     

ICP–MS法测定铅精矿、锌精矿、混合铅锌矿中的铊

建立铅精矿、锌精矿、混合铅锌矿中铊的分析方法。试样采用盐酸、硝酸、硫酸消解,挥发除去硫,沉淀除去大部分铅和硅,用电感耦合等离子质谱(ICP–MS)法测定样品溶液中铊的含量。对基体及主要杂质元素的干扰情况及消除方法进行试验,优化了分析方法。铊含量在0.01~10μg/L的范围内具有良好的线性关系,线性相关系数大于0.999 9,检出限为0.001 8μg/L。测定结果的相对标准偏差为1.42%~3.96%(n=11),加标回收率为92.7%~106.8%。该方法简单、快速、准确,可用于铅锌精矿、混合铅锌矿中铊的测定。     

改进分光光度法快速测定锡精矿中的砷

建立了改进的分光光度法快速测定锡精矿中砷的方法,样品经过氯酸钾-硝酸-盐酸低温溶解、硫酸发烟处理,然后用盐酸溶解后澄清,取清液用分光光度法进行砷的测定。方法简便、实用、快速。经国家标准物质分析验证,测定值与标准值相符,相对标准偏差(RSD,n=12)为1.1%~1.4%;适用于锡精矿中0.01%以上砷的测定。     

电感耦合等离子体原子发射光谱(ICP-AES)法测定铅锌精矿中铊

采用HCl-HNO_3-HF-HClO_4四种酸溶解铅锌精矿样品,稀释后用电感耦合等离子体原子发射光谱(ICP-AES)法测定其中的铊元素,测定范围0.005%~0.05%。实验确定了介质酸浓度、干扰元素的校正方法。方法相对标准偏差(n=7)为1.3%~4.8%,加标回收率为93.7%~102%,方法干扰少、快速、结果准确,适用于大批量铅锌精矿样品中铊的测定。     

微波消解-电感耦合等离子体发射光谱(ICP-OES)法测生物质中的碱金属和碱土金属

为研究并解决测试生物质样品中碱金属和碱土金属含量的干扰,采用微波消解-电感耦合等离子体发射光谱(ICP-OES)法对生物质中的碱金属和碱土金属钾、钙、钠、镁元素进行测定,考察了样品消解后不同的酸体系,共存元素干扰对钾、钠、钙、镁含量测定的干扰研究。经过研究表明,接近分析标准曲线酸浓度的样品干扰小,铅、铟、钛、锰元素对钠元素测定造成干扰,砷、铜、镉对钙元素测定干扰,铝对钾元素测定有干扰,镁测定不受共存元素干扰影响,运用干扰系数法可以减少共存元素对测定元素的误差。各待测元素标准曲线相关系数大于0.9996,检出限为0.0014~0.023 mg/L,玉米芯各元素的相对标准偏差为0.98%~1.9%,加标回收率为80.2%~106%;西瓜皮的各元素相对标准偏差为0.91%~2.3%,加标回收率为85.3%~106%。方法用于测定国家标准物质GBW07603,各元素结果均在标准值参考范围内。方法用于测定生物质中碱金属和碱土金属的结果,用t检验法与离子色谱测定值进行比对,结果无显著性差异。     

Na_2EDTA滴定法测定锡阳极泥中的铋量

研究了Na_2EDTA标准滴定溶液测定锡阳极泥中铋的方法。探讨了锡阳极泥的溶样方式、滴定溶液酸度、滴定溶液温度、共存元素干扰、加标回收、方法的准确度与精密度。方法适用于锡阳极泥中5%~20%铋量的测定,尤其是铟量在0.1%及以上时,方法相对标准偏差(RSD)为0.55%~1.4%,加标回收率为99.81%~101.3%。具有操作步骤简单、适用性广、分析结果重现性好与准确度高等优点。     

Na2EDTA滴定法测定锡阳极泥中的铋量

研究了Na_2EDTA标准滴定溶液测定锡阳极泥中铋的方法。探讨了锡阳极泥的溶样方式、滴定溶液酸度、滴定溶液温度、共存元素干扰、加标回收、方法的准确度与精密度。方法适用于锡阳极泥中5%~20%铋量的测定,尤其是铟量在0.1%及以上时,方法相对标准偏差(RSD)为0.55%~1.4%,加标回收率为99.81%~101.3%。具有操作步骤简单、适用性广、分析结果重现性好与准确度高等优点。     

碘量法测定铜冶炼烟尘中铜

试验研究了铜冶炼烟尘中铜含量的测定方法,试料用盐酸、氢氟酸、硝酸、高氯酸及硫酸分解,氢溴酸除去砷、锡、锑,硫酸除去硒的干扰。进一步对滴定条件和共存元素的干扰及消除进行了试验,最终确定了最佳条件。按照实验方法测定6个铜冶炼烟尘样品中铜量,结果的相对标准偏差为0.22%~0.65%,精密度高,准确度好。样品加标回收率在98.92%~100.38%之间, 适用于铜冶炼烟尘中铜含量为5.00 %～65.00 %的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.