Assessing the reactivity of sodium zincate [(TMEDA)Na(TMP)Zn(t)Bu2] towards benzoylferrocene: deprotonative metalation vs. alkylation reactions

Exploring the reactivity of the mixed-metal reagent [(TMEDA)Na(TMP)Zn(t)Bu(2)] (1) towards substituted metallocene benzoylferrocene 2, this study has found that two competing reactivity pathways are available for the sodium TMP-zincate, namely (i) remote 1,6-nucleophilic addition of a tert-butyl group to the phenyl ring of 2, and (ii) simultaneous alpha-deprotonation of the substituted cyclopentadienyl ring of the metallocene and alkylation (1,2-addition) across the C=O bond of the carbonyl group. A key organometallic intermediate [(TMEDA)Na(μ-TMP)Zn{OC((t)Bu)(Ph)(η(5)-C(5)H(3))Fe(η(5)-C(5)H(5))}] (3), resulting from the latter reaction has been trapped and characterised by X-ray crystallography and multinuclear ((1)H and (13)C) NMR spectroscopy. Its molecular structure revealed a unique two-fold activation of the tert-butyl groups bonded to zinc in the bimetallic base 1, showing for the first time that each alkyl group can exhibit markedly different reactivities (deprotonation vs. 1,2-addition) towards the same substrate molecule. Iodine interception of the organometallic intermediates of the reaction between 1 and 2 allowed the isolation and characterization ((1)H, (13)C NMR and X-ray crystallography) of the ferrocenyl derivatives [PhC(OH)((t)Bu)(η(5)-C(5)H(3)I)Fe(η(5)-C(5)H(5))] (4) and [4-(t)Bu-C(6)H(4)C([double bond, length as m-dash]O)(η(5)-C(5)H(4))Fe(η(5)-C(5)H(5))] (5) in a 29% and 24% isolated yield respectively. The low yield observed for the formation of 5 (resulting from the 1,6-addition reaction followed by spontaneous aerobic oxidation during aqueous workup) could be increased to 41% when the reaction mixture was hydrolysed in the presence of the radical oxidant TEMPO.     

Synthesis and characterization of a series of zinc bis[(alkyl)(trimethylsilyl)amide] compounds

A series of 21 secondary (alkyl)(trimethylsilyl)amines HNR(TMS) [R = n-propyl (1), i-propyl (2), n-butyl (3), i-butyl (4), s-butyl (5), tert-butyl (6), c-pentyl (7), n-pentyl (8), i-pentyl (9), l-methylbutyl (10), 2-methylbutyl (11), 1-ethylpropyl (12), 1,2-dimethylpropyl (13), tert-pentyl (14), phenyl (15), c-hexyl (16), n-hexyl (17), N,N-dimethyl-3-aminopropyl (18), benzyl (19), n-heptyl (20), 1,1,3,3-tert-butyl (21); TMS = Si(CH3)3] has been prepared and fully characterized by elemental analyses, multinuclear (1H, 13C, 29Si, 14N) NMR, IR, UV/vis, MS, and boiling point. A new method for determination of boiling points of milligram-size samples, based on DSC (differential scanning calorimetry), is described. Each amine has been converted to the corresponding zinc bis(amide) compound Zn[N(TMS)(R)]2 [R = n-propyl (22), i-propyl (23), n-butyl (24), i-butyl (25), s-butyl (26), tert-butyl (27), c-pentyl (28), n-pentyl (29), i-pentyl (30), 1-methylbutyl (31), 2-methylbutyl (32), 1-ethylpropyl (33), 1,2-dimethylpropyl (34), tert-pentyl (35), phenyl (36), c-hexyl (37), n-hexyl (38), N,N-dimethyl-3-aminopropyl (39), benzyl (40), n-heptyl (41), 1,1,3,3-tert-butyl (42); TMS = Si(CH3)3] and subsequently fully characterized by elemental analyses, multinuclear (1H, 13C, 29Si, 14N) NMR, IR, UV/vis, MS, and TGA. The experimental IR has been compared to the computationally calculated one for compound 27. Observed trends in volatility of the compounds are discussed in the context of the dominant intermolecular forces present in the condensed phase.     

A new interpretation of the reaction pathway of deprotonative metalation with TMP-Zn-ate/TMEDA Complex [TMEDA.Na(micro-tBu)(micro-TMP)Zn(tBu)

Density functional theory (DFT) calculations of possible reaction pathways and mechanisms for the deprotonation of benzene with Mulvey's reagent, TMEDA.Na(micro-R)(micro-TMP)Zn(R) (TMEDA=N,N,N',N'-tetramethylethylenediamine, R = alkyl, TMP = 2,2,6,6-tetramethylpiperidide) indicate that the deprotonation of benzene with Mulvey's reagent proceeds through a stepwise mechanism, not a one-step mechanism. In the first step, deprotonation involving the TMP ligand on the reagent is kinetically more favorable than that involving the alkyl ligand.     

Coordination Chemistry of 2,2'-Dipyridyl Diselenide: X-ray Crystal Structures of PySeSePy, [Zn(PySeSePy)Cl(2)], [(PySeSePy)Hg(C(6)F(5))(2)], [Mo(SePy)(2)(CO)(3)], [W(SePy)(2)(CO)(3)], and [Fe(SePy)(2)(CO)(2)] (PySeSePy = C(5)H(4)NSeSeC(5)H(4)N; SePy = [C(5)H(4)N(2-Se)-N,Se])

The coordination chemistry of 2,2'-dipyridyl diselenide (PySeSePy) (2) (C(10)H(8)N(2)Se(2)) has been investigated and its crystal structure has been determined (monoclinic, P2(1)/c, a = 10.129(2) ?, b = 5.7332(12) ?, c = 19.173(3) ?, beta = 101.493(8) degrees, Z = 4). In metal complexes the ligand was found to coordinate in three different modes, as also confirmed by X-ray structure determination. N,N'-coordination was found in the zinc complex [Zn(PySeSePy)Cl(2)] (3) (C(10)H(8)Cl(2)N(2)Se(2)Zn, triclinic, P&onemacr;, a = 7.9430(10) ?, b = 8.147(2) ?, c = 11.999(2) ?, alpha = 93.685(10) degrees, beta = 107.763(10) degrees, gamma = 115.440(10) degrees, Z = 2) and Se,Se'-coordination in the adduct of the ligand with bis(pentafluorophenyl)mercury(II) [PySeSePyHg(C(6)F(5))(2)] (5) (C(10)H(8)F(10)HgN(2)Se(2), monoclinic, P2(1)/n, a = 7.7325(10) ?, b = 5.9974(14) ?, c = 25.573, beta = 98.037(10) degrees, Z = 2), which however displays only weak interactions between selenium and mercury. The reaction of the ligand with norbornadiene carbonyl complexes of molybdenum and tungsten leads to reductive cleavage of the selenium-selenium bond with oxidation of the metal center and concomitant addition of the resulting selenolate to the metal carbonyl fragment. Thus the 7-coordinate complexes [Mo(SePy)(2)(CO)(3)] (6) (C(13)H(8)MoN(2)O(3)Se(2), monoclinic, P2(1)/n, a = 9.319(3) ?, b = 12.886(5) ?, c = 13.231(6) ?, beta = 109.23(3) degrees, Z = 4) and [W(SePy)(2)(CO)(3)] (7) (C(13)H(8)N(2)O(3)Se(2)W, monoclinic, P2(1)/n, a = 9.303(2) ?, b = 12.853(2) ?, c = 13.232(2) ?, beta = 109.270(10) degrees, Z = 4) were obtained. The same N,Se-coordination pattern emerges from the reaction of [Fe(2)(CO)(9)] with (2) leading to [Fe(SePy)(2)(CO)(2)] (8) (C(12)H(8)FeN(2)O(2)Se(2), monoclinic, P&onemacr;, a = 8.6691(14) ?, b = 12.443(2) ?, c = 14.085(2) ?, alpha = 105.811(10) degrees, beta = 107.533(8) degrees, gamma = 92.075(10) degrees, Z = 4).     

Redox regulation of protein tyrosine phosphatase 1B (PTP1B): a biomimetic study on the unexpected formation of a sulfenyl amide intermediate

The effect of steric and electronic environments around the sulfur and nitrogen atoms and the role of nonbonded S...O/N interactions on the cyclization reactions of amide substituted benzene sulfenic acids are described. The reaction profiles and the role of different substituents on the cyclization are investigated in detail by theoretical calculations. It is shown that the synthetic thiols having ortho-amide substituents may serve as good models for the enforced proximity of the amide and cysteine thiol groups at the active site of protein tyrosine phosphatase 1B (PTP1B). However, some of the sulfenic acids derived from such models do not effectively mimic the cyclization of protein sulfenic acids. This is mainly due to the requirement of very high energy for breaking the S-O bond to form a planar five-membered ring of isothiazolidinone. It is shown that the sulfenic acid having two substituents-an amide moiety and a heterocyclic group-in the ortho-positions undergoes a rapid cyclization reaction to produce the corresponding sulfenyl amide species. These studies reveal that the introduction of a substituent at the 6-position of the benzene ring enhances the cyclization process not only by facilitating a closer approach of the -OH group and the backbone -NH moiety but also by increasing the electrophilicity of the sulfur atom in the sulfenic acid.     

Kinetics and mechanism of formation of the platinum-thallium bond: the [(CN)(5)Pt-Tl(CN)(3)](3)(-) complex

Formation kinetics of the metal-metal bonded [(CN)(5)PtTl(CN)(3)](3)(-) complex from Pt(CN)(4)(2)(-) and Tl(CN)(4)(-) has been studied in the pH range of 5-10, using standard mix-and-measure spectrophotometric technique at pH 5-8 and stopped-flow method at pH > 8. The overall order of the reaction, Pt(CN)(4)(2)(-) + Tl(CN)(4)(-) right harpoon over left harpoon [(CN)(5)PtTl(CN)(3)](3)(-), is 2 in the slightly acidic region and 3 in the alkaline region, which means first order for the two reactants in both cases and also for CN(-) at high pH. The two-term rate law corresponds to two different pathways via the Tl(CN)(3) and Tl(CN)(4)(-) complexes in acidic and alkaline solution, respectively. The two complexes are in fast equilibrium, and their actual concentration ratio is controlled by the concentration of free cyanide ion. The following expression was derived for the pseudo-first-order rate constant of the overall reaction: k(obs) = (k(1)(a)[Tl(CN)(4)(-) + (k(1)(a)/K(f)))(1/(1 + K(p)[H(+)]))[CN(-)](free) + k(1)(b)[Tl(CN)(4)(-)] + (k(1)(b)/K(f)), where k(1)(a) and k(1)(b) are the forward rate constants for the alkaline and slightly acidic paths, K(f) is the stability constant of [(CN)(5)PtTl(CN)(3)](3)(-), and K(p) is the protonation constant of cyanide ion. k(1)(a) = 143 +/- 13 M(-)(2) s(-)(1), k(1)(b) = 0.056 +/- 0.004 M(-)(1) s(-)(1), K(f) = 250 +/- 54 M(-)(1), and log K(p) = 9.15 +/- 0.05 (I = 1 M NaClO(4), T = 298 K). Two possible mechanisms were postulated for the overall reaction in both pH regions, which include a metal-metal bond formation step and the coordination of the axial cyanide ion to the platinum center. The alternative mechanisms are different in the sequence of these steps.     

Synthesis,characterization and antibacterial activity of some new triphenyltin(IV) sulfanylcarboxylates: Crystal structure of [(SnPh3)2(p-mpspa)], [(SnPh3)2(cpa)] and [(SnPh3)2(tspa)(DMSO)]

Five new triphenyltin(IV) sulfanylcarboxylates of the general formula [(SnPh₃)₂L] (L = pspa, tspa, fspa, p-mpspa or cpa, where p = 3-(2-phenyl)-, t = 3-(2-thienyl)-, f = 3-(2-furyl)-, p-mp = 3-(4-methoxyphenyl)-, spa = 2-sulfanylpropenoato and cpa = 2-cyclopentilyden-2-sulfanylacetate) have been synthesized by reacting triphenyltin(IV) hydroxide with the corresponding acid in ethanol/acetone. The complexes have been characterized by elemental analysis and mass spectrometry and by vibrational and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopies. In the case of [(SnPh₃)₂(p-mpspa)] and [(SnPh₃)₂(cpa)], X-ray structural studies showed that in both compounds each Sn atom is coordinated to three phenyl C atoms and to one S or O atom of the bridge ligand L. All five complexes are active against strains of Staphylococcus aureus, but are inactive against Escherichia coli and Pseudomonas aeruginosa. From a solution of [(SnPh₃)₂(tspa)] in DMSO-d₆ the new complex [(SnPh₃)₂(tspa)(DMSO)] was isolated. The single-crystal X-ray diffractometric study of this complex is also reported, showing that both Sn atoms are bridged by the tspa ligand, whereas the molecule of DMSO is coordinated to one of the tin atoms via the oxygen atom.     

N,N'-diisopropyl-N'-bis(trimethylsilyl)guanidinate ligand as a supporting coordination environment in yttrium chemistry. Synthesis, structure, and properties of complexes [(Me(3)Si)(2)NC(Ni-Pr)(2)]YCl(2)(THF)(2), [(Me(3)Si)(2)NC(Ni-Pr)(2)]Y(CH(2)SiMe(3))(2)(THF)(2), and [(Me(3)Si)(2)NC(Ni-Pr)(2)]Y[(mu-H)(mu-Et)(2)BEt](2)(THF)

The reaction of anhydrous YCl3 with an equimolar amount of lithium N,N'-diisopropyl-N' '-bis(trimethylsilyl)guanidinate, Li[(Me3Si)2NC(Ni-Pr)2], in tetrahydrofuran (THF) afforded the monomeric monoguanidinate dichloro complex {(Me3Si)2NC(Ni-Pr)2}YCl2(THF)2 (1). Alkylation of complex 1 with 2 equiv of LiCH2SiMe3 in hexane at 0 degrees C yielded the monomeric salt-free dialkyl complex {(Me3Si)2NC(Ni-Pr)2}Y(CH2SiMe3)2(THF)2 (2). The bis(triethylborohydride) complex [(Me3Si)2NC(Ni-Pr)2]Y[(mu-H)(mu-Et)2BEt]2(THF) (5) was prepared by the reaction of complex 1 with 2 equiv of LiBEt3H in a toluene-THF mixture at 0 degrees C. The complexes 1, 2, and 5 were structurally characterized. Complex 2 as well as the systems 2-Ph3B, 2-Ph3B-MAO, and 1-MAO (MAO = methylaluminoxanes) in toluene were inactive in ethylene polymerization, while the product obtained in situ from the reaction of complex 2 with a 2-fold molar excess of PhSiH3 in toluene polymerized ethylene with moderate activity.     

Low-coordinate chromium siloxides: the "box" [Cr(mu-Cl)(mu-OSitBu3)]4, distorted trigonal [(tBu3SiO)3Cr][Na(benzene)] and [(tBu3SiO)3Cr][Na(dibenzo-18-c-6)], and trigonal (tBu3SiO)3Cr

Treatment of CrCl(2)(THF)(2) with NaOSi(t)Bu(3) afforded the tetrameric "box" [Cr(mu-Cl)(mu-OSi(t)Bu(3))](4) (1, X-ray). THF cleaved 1 to provide trans-(silox)ClCr(THF)(2) (2), whereas degradation of 1 with 4-picoline caused disproportionation and the generation of trans-Cl(2)Cr(4-pic)(2) and trans-(silox)(2)Cr(4-pic)(x) (n = 2, 3; 3, 3-4-pic). Chromous centers in 1 were antiferromagnetically coupled, and density functional calculations on the high-spin (multiplicity = 17) model [Cr(mu-Cl)(mu-OH)](4) (1') revealed that its singly occupied 3d orbitals spanned an energy range of approximately 2 eV. The addition of 8 equiv of Na(silox) to 1 yielded [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na.C(6)H(6) (4, Y shaped, angle OCrO(Na) = 91.28(7) degrees), and treatment of 4 with dibenzo-18-crown-6 produced [(silox)(3)Cr][Na(dibenzo-18-crown-6)] (5, angle OCrO = approximately 120 degrees, (120 + alpha) degrees, (120 - alpha) degrees). Calculations of [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na (4') and Cr(silox)(3)(-) (5') provided reasonable matches with the experimental geometries (X-ray). The trigonal chromic derivative (silox)(3)Cr (6) was synthesized from CrCl(3)(THF)(3) for structural and calculational comparisons to the chromous derivatives.     

Metal- and ligand-centered monoelectronic oxidation of mu-nitrido[((tetraphenylporphyrinato)manganese)phthalocyaninatoiron)], [(TPP)Mn-N-FePc]. X-ray crystal structure of the Fe(IV)-containing species [(THF)(TPP)Mn-N-FePc(H(2)O)](I(5))02THF

The reaction of mu-nitrido[((tetraphenylporphyrinato)manganese)(phthalocyaninatoiron)], [(TPP)Mn-N-FePc], with I(2) in THF develops with the formation of two different species, i.e., [(THF)(TPP)Mn-N-FePc(H(2)O)](I(5)).2THF (I) and [(TPP)Mn(IV)-N-Fe(III)Pc](I(3)) (II). On the basis of single-crystal X-ray work and M?ssbauer, EPR, Raman, and magnetic susceptibility data, I, found to be isostructural with the corresponding Fe-Fe complex, is shown to contain a low-spin triatomic Mn(IV)=N=Fe(IV) system (metal-centered oxidation). Data at hand for II (M?ssbauer, EPR, Raman) show, instead, that oxidation takes place at one of the two macrocycles, very likely TPP (ligand-centered oxidation). The same cationic fragment present in I, and containing the Mn(IV)=N=Fe(IV) bond system, is also obtained when (TPP)Mn-N-FePc is allowed to react in THF with (phen)SbCl(6) (molar ratio 1:1). There are indications that the use of (phen)SbCl(6) in excess (2:1 molar ratio), in benzene, probably determines further oxidation with the formation of a species showing the combined presence of the Mn(IV)-Fe(IV) couple and of a pi-cation radical.     

Synthesis of Ru-Pt and Ru-Pd mixed-metal imido clusters from a diruthenium imido-methylene scaffold [(Cp*Ru)2(mu2-NPh)(mu2-CH2)

The diruthenium mu2-imido mu2-methylene complex [(Cp*Ru)2(mu2-NPh)(mu2-CH2)] serves as a bifunctional scaffold for cluster synthesis, producing a mu3-imido Ru2Pt cluster [(Cp*Ru)2(mu3-NPh)(mu2-CH2)Pt(PMe3)2] on treatment with [Pt(eta2-C2H4)(PMe3)2] and a mu3-methylidyne Ru4Pd2 cluster [(Cp*Ru)2(mu2-NPh)(mu3-CH)PdCl]2 with [PdMeCl(cod)].     

Mono-, di-, and Ttianionic beta-diketiminato ligands: a computational study and the synthesis and structure of [(YbL)(3)(THF)], L = [[N(SiMe(3))C(Ph)](2)CH

A trinuclear Yb beta-diketiminato cluster [(YbL)3(THF)] (1) (L = {N(SiMe3)C(Ph)}2CH), containing L-1 and L-3 as well as Yb(II) and Yb(III) centers, was obtained by treatment of [YbL2] with Yb-naphthalene and was characterized by X-ray crystallography. The electron distribution in 1 and the Yb(II)/L-2 complex [Yb{(mu-L)Li(THF)}2] (2) was analyzed by DFT and ONIOM (QM/MM) calculations.     

Identification of the [(bpy)2Ru(Im)(H2O)]2+ complex as an reaction intermediate by reversed-phase high-performance liquid chromatography

Summary The synthesis of the complex [(bpy)₂Ru(Im)₂]²⁺ (bpy=2,2-bipyridine; Im=imidazole) has been monitored by reversed-phase HPLC. The analytical results obtained during the reaction have shown that it is feasible to identify and isolate the [(bpy)₂RuIm(H₂O)]²⁺ complex as a reaction intermediate. The optimization of the synthetic procedures for these two species has been established and the compounds have been obtained in high purity. The use of HPLC has enabled complete analytical control of the synthesis of the [(bpy)₂RuL₂]²⁺ class of compounds, enabling the identification of reaction intermediates.     

Linear versus bent bonding in metal-phosphinidene complexes: Theoretical studies of the electrophilic phosphinidene complexes [(Cp)(CO)2MPMe)], [(Cp)(CO)3MPMe)] (M = Cr, Mo, W)

Density functional theory calculations have been performed for the title phosphinidene complexes using the exchange correlation functionals BP86 and B3LYP. The optimized bond lengths and angles of the model compounds are in excellent agreement with experiment. The M-P bond lengths in linear phosphinidene complexes correspond to a Pauling bond order of ∼ 3. The bent geometries at phosphorus in the bent metal phosphinidene complexes are consistent with the presence of a trivalent phosphorus(III) center which is singly bonded to carbon and doubly bonded to transition metal. The analysis of the delocalized Kohn-Sham orbitals shows the polarization of the M-P σ bonding orbitals towards the phosphorus atom in the MPMe bonds, while in the MPMe bond, the contributions of metal and phosphorus are almost the same. In the linear phosphinidene complexes the contributions of the covalent bonding ΔE_orb are more than the electrostatic interaction ΔE_elstat. The bent phosphinidene complexes have a lower degree of covalent bonding than the linear phosphinidene complexes. The major differences between the linear and bent phosphinidene complexes are found in the degree of π-bonding. The MPMe bonds show a true M-P π bond and a deviated π bond due to slight bent M-P-C bond angles. The MPMe bonds show a true M-P π bond and a lone-pair on phosphorus.     

环(烷基)(氨基)卡宾及其在烯烃复分解反应中的研究展望

烯烃复分解反应是形成碳碳双键的重要反应之一,其发展与结构明确的钌催化剂[L2X2Ru=CHR]中配体的创制密切相关.1999年,环二氨基卡宾配体的引入极大提高了催化剂的活性、稳定性以及官能团适用性.2005年,Bertrand等发展了一种比环二氨基卡宾具有更强给电子能力的配体──环(烷基)(氨基)卡宾(CAACs)配体,且卡宾中心α位为一季碳原子,这使得其空间环境与其他类型卡宾配体有很大差异.首先概述了CAACs配体的合成及性质,紧接着讨论了其在烯烃复分解催化反应中的研究进展,最后对该领域所存在的问题进行简要分析并对其发展作了展望.     

Ancillary ligand effect on the properties of "Mg(thd)2" and crystal structures of [Mg(thd)2(ethylenediamine)]2, [Mg(thd)2(tmeda)], and [Mg(thd)2(trien)

Complexes [Mg(thd)2(A)] (Hthd = 2,2,6,6-tetramethyl-3,5-heptanedione; A = ethylenediamine, en (2); N,N'-dimethylethylenediamine, dmeda (3); N,N'-diethylethylenediamine, deeda (4); N,N,N',N'-tetramethylethylenediamine, tmeda (5); diethylenetriamine, dien (6); triethylenetetra-amine, trien (7); 1,2-ethanediol (8)) and [Mg(thd)2(EtOH)]2(1,3-propanediol) (9) were prepared and characterized by NMR spectroscopy, mass spectrometry, and thermal analysis. Crystal structures of compounds 2, 5, and 7 are presented. In all structures, Mg exhibits distorted six-coordination, with four shorter distances between Mg and keto-oxygens and two longer distances between Mg and nitrogen atoms (2, 5, 7). The structure of 2 consists of two monomeric complexes which form an asymmetric unit. The structure of 7 is similar to 2, but the trien molecule has coordinated through one terminal and one vicinal N atom to Mg. All complexes containing amines evaporated almost completely, but the complex 8, which contained 1,2-ethanediol, was thermally unstable and decomposed when heated. At temperatures below the dissociation temperature, all adducts of diamines appeared to evaporate intact.     

Isolation and characterisation of a (-)-sparteine coordinated mixed alkyl/amido sodium magnesiate, a chiral variant of an important utility ate base

When a 1 : 1 (n)BuNa-(n,s)Bu(2)Mg mixture is treated with two molar equivalents of TMP(H) (TMP = 2,2,6,6-tetramethylpiperidide) and one molar equivalent of (-)-sparteine in hydrocarbon medium, a new chiral mixed-metal, mixed alkyl-amide [{(-)-sparteine}.Na(mu-Bu)(mu-TMP)Mg(TMP)] can be isolated.     

Investigation of alkyl metal intermediate formation in the rhodium-catalyzed hydroformylation: Experimental and theoretical approaches

This review describes experimental results obtained for regioselectivities and diastereoselectivities in rhodium-catalyzed hydroformylations and deuterioformylations of a variety of unsaturated substrates with unmodified Rh catalysts and compares them with values computed in the density functional theory (DFT) framework. Deuterioformylation experiments pointed out that under mild reaction conditions isomeric alkyl metal intermediate formation is non-reversible; hence the selectivity for alkyls reflects the selectivity for the aldehydes. The stability of the relevant alkyl rhodium transition states (TS) has been determined with computational methods at the B3P86/6-31G* level (employing effective core potentials for Rh in the LanL2DZ valence basis set). Theoretical results turn out to be in good agreement with the experimental ones obtained under mild reaction conditions. Significant differences between theory and experiment are conversely obtained for hydroformylations of vinylidenic olefins, such as 1,1-diphenylethene, carried out at high temperature, where β-hydride elimination takes place. To clarify the reaction mechanism under those reaction conditions, it was necessary to compute the whole reaction mechanism, including zero point and thermal corrections also. The calculations, performed on the hydroformylation of 1,1-diphenylethene (yielding almost exclusively linear aldehydes), allowed us to put forward a novel explanation for that behavior: the addition of the fourth CO group to the tricarbonyl intermediate to give the tetracarbonyl one is prevented in the branched isomer, but not in the linear isomer.     

Ligand influences on copper molybdate networks: the structures and magnetism of [Cu(3,4'-bpy)MoO(4)], [Cu(3,3'-bpy)(0.5)MoO(4)], and [Cu(4,4'-bpy)(0.5)MoO(4)].1.5H(2)O

The reactions of a Cu(II) salt, MoO(3), and the appropriate bipyridine ligand yield a series of bimetallic oxides, [Cu(3,4'-bpy)MoO(4)] (1), [Cu(3,3'-bpy)(0.5)MoO(4)] (2), and [Cu(4,4'-bpy)(0.5)MoO(4)].1.5H(2)O (3.1.5H(2)O). The structures of 1-3 exhibit three-dimensional covalent frameworks, constructed from bimetallic oxide layers tethered by the dipodal organoimine ligands. However, the [CuMoO(4)] networks are quite distinct. For structure 1, the layer consists of corner-sharing [MoO(4)] tetrehedra and [CuN(2)O(3)] square pyramids, while the layer of 2 is constructed from [MoO(4)] tetrehedra and binuclear [Cu(2)O(6)N(2)] units of edge-sharing copper square pyramids. The oxide substructure of 3 consists of [MoO(4)] tetrahedra corner-sharing with tetranuclear clusters of edge-sharing [CuO(5)N] octahedra. Crystal data: C(10)H(8)N(2)O(4)CuMo (1), orthorhombic Pbca, a = 12.4823(6) A, b = 9.1699(4) A, c = 19.5647(9) A, V = 2239.4(1) A(3), Z = 8; C(5)H(4)NO(4)CuMo (2), triclinic P, a = 5.439(1) A, b = 6.814(1) A, c = 10.727(2) A, alpha = 73.909(4)(o), beta = 78.839(4)(o); gamma = 70.389(4)(o); V = 357.6(1) A(3), Z = 2; C(10)H(8)N(2)O(8)Cu(2)Mo(2).3H(2)O 3.1.5H(2)O, triclinic P, a = 7.4273(7) A, b = 9.2314(8) A, c = 13.880(1) A, alpha = 71.411(2)(o), beta = 88.528(2)(o), gamma = 73.650(2)(o), V = 863.4(1) A(3), Z = 2. The magnetic properties of 1-3 arise solely from the presence of the Cu(II) sites, but reflect the structural differences within the bimetallic oxide layers. Compound 1 exhibits magnetic behavior consistent with ferromagnetic chains which couple antiferromagnetically at low temperature. Compound 2 exhibits strong antiferromagnetic dimeric interactions, with the magnetic susceptibility data consistent with the Bleaney-Bowers equation. Similarly, the magnetic susceptibility of 3 is dominated by antiferromagnetic interactions, which may be modeled as a linear S = 1/2 Heisenberg tetramer.     

Ligand exchange reaction between an alkylzinc primary amide and a dialkylmagnesium compound: crystal structures of [(thf)MeMg-mu-N(H)SiiPr3]2 and (tmeda)Mg[N(H)SiiPr3]2

The reaction of alkylzinc triisopropylsilylamide with dialkylmagnesium leads to a ligand exchange. Besides the starting materials, heteroleptic alkylmagnesium triisopropylsilylamide and homoleptic magnesium bis(triisopropylsilylamide) are detected by NMR spectroscopy. After the addition of 1,2-bis(dimethylamino)ethane (TMEDA) to the reaction mixture, (tmeda)Mg[N(H)SiiPr3]2 (1) precipitates as colorless cuboids (C24H60MgN4Si2, a = 2269.6(2), b = 1029.58(5), c = 1593.2(1) pm, beta = 120.826(8) degrees , monoclinic, C2/c, Z = 4). The amide nitrogen atoms are coordinated planarily with strongly widened Mg-N-Si bond angles of 139.2(1) degrees . The metalation of triisopropylsilylamine with dimethylmagnesium in THF yields quantitatively heteroleptic [(thf)MeMg-N(H)SiiPr3]2 (2) which crystallizes as colorless needles (C28H66Mg2N2O2Si2, a = 1982.4(2), b = 2034.1(1), c = 907.22(6) pm, beta = 95.021(9), monoclinic, P2(1)/n, Z = 4). Because of the bridging position of the triisopropylsilylamide anion, the tetracoordinate nitrogen atoms show rather long Mg-N bond lengths of 210.7 pm (average value).